Download Print this page
Dynex DX-TAPS5 Quick Setup Manual

Dynex DX-TAPS5 Quick Setup Manual

Adapter plug set

Advertisement

Quick Links

DX-TAPS5 Adapter Plug Set
Jeu d'adaptateurs DX-TAPS5
Juego de enchufes adaptadores DX-TAPS5
QUICK SETUP GUIDE | GUIDE D'INSTALLATION RAPIDE | GUÍA DE INSTALACIÓN RÁPIDA
Important safety instructions
Always follow these basic precautions when using your travel adapter:
1 READ ALL INSTRUCTIONS BEFORE USING.
2 DO NOT use these adapters with products containing screw-base lampholders (sockets) or
convenience receptacles.
3 THIS PRODUCT IS NOT A VOLTAGE CONVERTER. Check the markings on each appliance and use these
adapters only with appliances rated for both 120 and 240 volts. Using appliances rated for 120 volts
with these adapters may result in a risk of fire, electric shock, injury to persons, or damage to the
appliance.
4 Make sure that the dual-voltage selector switch, when provided, is in the correct voltage position
before operating. Before plugging in, read the information about dual voltage operation contained in
these instructions and in the instructions provided with each appliance to be used with these adapters.
5 Make sure that the dual voltage selector switch on your appliance, when provided, is in the correct
voltage position before operating.
6 Always disconnect the adapter and the appliance from the power outlet when not in use.
SAVE THESE INSTRUCTIONS.
7
Package contents
• Adapter plug set (5 plugs)
• Quick Setup Guide
Instructions for use
Warning: Indoor use only! Intended for use outside of USA and Canada.
Adapter plugs are for use with either dual voltage appliances (110 V/240 V), converters, or transformers.
Always attach the adapter to the appliance plug first, then insert the adapter into the power outlet. If
you are using a converter or transformer, plug the converter or transformer into the adapter plug, then
plug your single voltage appliance into the converter or transformer.
Adapter plugs
Make sure that the dual voltage selector switch on your appliance, when provided, is in the correct
voltage position before operating. Confirm the voltage available at each overseas location before using
the adapters with an appliance.
In certain countries, you may encounter a recessed outlet or other shapes of power outlets. This set of
adapter plugs will adapt to most power outlets found worldwide.
For outlet types:
To use in:
Set selector at:
Parts of North America,
Caribbean, Japan, and parts of China
120 V
Flat parallel
Parts of South America,
blades
Japan, and parts of China
240 V
Parts of Middle East, Africa,
Asia, South America
120 V
Round thin pin
Europe, parts of Middle East,
Africa, Asia, South America
240 V
Australia, New Zealand, Fiji
240 V
Flat angled blades
Round thick pins
Northern Europe
240 V
Great Britain, Ireland,
240 V
parts of Africa, Hong Kong,
3-prong blades
and Singapore
NOTES: Do not leave the adapter in the power outlet when not in use.
Do not use adapter plugs if they are not working correctly, have been damaged, or dropped in water.
For more information
For troubleshooting, specifications, legal notices, and warranty, see www.dynexproducts.com.
© 2012 BBY Solutions, Inc., All Rights Reserved.
Instructions de sécurité importantes
Toujours observer ces précautions de sécurité élémentaires lors de l'utilisation de ces adaptateurs
de voyage :
1 LIRE TOUTES LES INSTRUCTIONS AVANT LEUR UTILISATION.
2 NE PAS utiliser ces adaptateurs avec des produits qui ont des supports de lampes à vis (douilles)
ou des plaques multiprises.
3 CES PRODUITS NE SONT PAS DES CONVERTISSEURS DE TENSION. Vérifier les spécifications de
chaque appareil et n'utiliser ces adaptateurs qu'avec des appareils de puissance nominale
120 et 240 V. L'utilisation de ces adaptateurs avec des appareils de puissance nominale
uniquement de 120 V peut être source d'incendie, de choc électrique, de blessures pour les
personnes ou endommager les appareils.
4 Vérifier que le sélecteur de tension, s'il en existe, est sur la position correcte avant toute
utilisation. Avant le branchement, lire dans ces instructions l'information relative au
fonctionnement bitension, ainsi que toutes instructions fournies avec chaque appareil pour
lequel ces adaptateurs sont utilisés.
5 Vérifier que le sélecteur de tension de l'appareil, s'il en existe, est sur la position correcte avant
toute utilisation.
6 Toujours débrancher l'adaptateur et l'appareil de la prise secteur quand l'appareil n'est pas utilisé.
CONSERVER CES INSTRUCTIONS.
7
Contenu de l'emballage
• Jeu d'adaptateurs (5 fiches)
• Guide d'installation rapide
Mode d'emploi
Avertissement : Utilisation à l'intérieur uniquement! Destiné à être utilisé en dehors des États-Unis
et du Canada. Les adaptateurs doivent être utilisés avec des appareils bitension (110 V/240 V), des
convertisseurs ou des transformateurs de tension. Toujours fixer d'abord l'adaptateur à la fiche de
l'appareil, puis insérer l'adaptateur dans une prise secteur. En cas d'utilisation d'un convertisseur ou
transformateur de tension, brancher d'abord l'adaptateur à ces derniers, puis brancher l'appareil à
tension unique sur le convertisseur ou le transformateur.

Advertisement

loading

Summary of Contents for Dynex DX-TAPS5

  • Page 1 4 Make sure that the dual-voltage selector switch, when provided, is in the correct voltage position Africa, Asia, South America 240 V Juego de enchufes adaptadores DX-TAPS5 personnes ou endommager les appareils. before operating. Before plugging in, read the information about dual voltage operation contained in these instructions and in the instructions provided with each appliance to be used with these adapters.
  • Page 2 Adaptateurs de prises Pour toute information complémentaire Enchufes adaptadores Para más información Vérifier que le sélecteur de tension de l’appareil, s’il en existe, est sur la position correcte avant toute Pour les problèmes et solutions, les spécifications, les avis juridiques et la garantie aller sur le site Asegúrese de que el selector de bitensión de su aparato, si existe, esté...