MFJ tiny Travel Tuners Tiny 41/2x21/4x3 inch tuner handles full 150 ...

MFJ 2013 Ham Catalog 

1972 40 

. . . Forty Years of Progress in Serving Amateur Radio 

Audio Filters 

Antenna Analyzers 

Remote Automatic Tuners 

For your nearest dealer or to order, call 800-647-1800 

MFJ ENTERPRISES, INC. 

300 Industrial Park Rd. 

Starkville, MS 39759 

Index on 

Pgs. 80-81 

40 Years! 

Phone: (662) 323-5869; 8-4:30 CST, 

Monday-Friday. Fax: (662) 323-6551 

E-mail: mfjcustserv@mfjenterprises.com 

Visit...www.mfjenterprises.com 

Years! 2012 

1972 

1992 

1995 

2000 

2012 

1982 

1990 

1991 

1996 

2007 

2010 

2002 

Cushcraft 

No Matter What TM Warranty 

Every MFJ product is protected by 

MFJ’s famous one year No Matter What TM limited 

warranty. We will repair or replace your 

MFJ product no matter what (at our option) 

for one full year. Prices and specifications subject 

to change without notice or obligation. MFJ will not 

be held responsible for printing errors. 

PROUDLY 

Made in the 

USA 

Antenna Tuners 

Packet and Multimode TNCs 

Morse Code Tutors/Readers 

Automatic Antenna Tuners

MFJ 1500 Watt Legal Limit IntelliTuner TM 

Full 1500 watts SSB/CW…Digital & Analog SWR/WattMeter . . . All features of MFJ IntelliTuners TM -- Ultra-fast, Safe Automatic 

Tuning . . . Wide Tuning Range (12-1600 Ohms from 1.8 to 30 MHz ) . . . Radio Interfaces . . . Built-in Antenna 

Switch for two coax/long wire . . . Automatic Bypass protects your amplifier . . . Field Upgradeable Software . . . Very Compact! 

MFJ-998 

$ 699 95 

The MFJ-998 Full Legal 

Limit 1500 Watt 

IntellitunerTM takes you to 

the final level in automatic 

antenna tuners. With a 

capability of 1500 watts 

SSB and CW, coupled with 

automatic tuning, your high-power station 

can now operate essentially hands-free even 

when frequency and band changes are 

made. 

Fast Automatic Tuning 

The MFJ-998 instantly matches impedances 

from 12-1600 ohms using MFJ's exclusive 

IntelliTuneTM , AdaptiveSearchTM and 

InstantRecallTM algorithms with over 20,000 

VirtualAntennaTM Memories. When you key 

your transmitter, MFJ's InstantRecallTM checks to see if that frequency has been used 

before. If so, tuning is instantaneous. If 

not, MFJ's IntelliTuneTM algorithm (based on 

MFJ's efficient SWR Analyzer technology) 

measures the impedance, snaps the necessary 

components in place, and then finetunes 

the SWR. If the antenna impedance is 

outside the tuner's measurement range, MFJ's 

Adaptive SearchTM algorithm measures the 

frequency and determines only relevant 

component values -- which are then searched 

for fast tuning. 

Safe Automatic Tuning 

and Amplifier Protection 

The MFJ-998 includes MFJ’s Amplifier 

Bypass ControlTM Ship Code D 

-- an MFJ exclusive feature! 

When used with a transceiver interface 

cable, tuning is safe and "stupidproof"! 

When a tuning cycle is initiated, 

the MFJ-998 first bypasses any in-line 

amplifier. Next, the MFJ-998 initiates a 

low-power CW tuning carrier from your 

transceiver. When tuning is complete, the 

MFJ-998 reverts your transceiver to its prior 

power and mode, and re-enables the amplifier. 

This entire cycle typically takes less 

than a second! Finally, if the MFJ-998 cannot 

find a match better than a pre-set amplifier 

SWR trip-point, the amplifier stays 

bypassed to provide automatic SWR protec- 

New! 

tion for your amplifier -- another MFJ exclusive! 

Analog SWR/Wattmeter 

A large super-bright LED lighted analog 

Cross-Needle SWR/Wattmeter displays 

selectable 300/60 watt or 3000/600 watt forward/reflected 

full-scale ranges. You can 

even select automatic power ranging -- the 

best power range is automatically selected 

for you. 

Digital LCD SWR/Wattmeter 

A two-line, 16-character backlit LCD 

meter displays SWR, forward/reflected 

power, frequency, antenna selected, an autoranging 

bargraph power indication, and 

much more. You can even read the final 

matching inductor and capacitor values 

should you want to build your own fixed 

matching network. Simple menus determine 

displayed information - no complex 

button combinations to remember! 

MFJ VirtualAntenna TM Memory 

MFJ new VirtualAntenna TM Memory system 

gives you 4 antenna memory banks for each 

of 2 switchable antenna connectors. Select 

up to 4 antennas on each antenna connector. 

Each antenna has 2500 memories, 20,000 

total. Has two coax connectors and a binding 

post for end-fed long wire antennas. 

Download and Upgrade Remotely 

Field upgradeable firmware via the serial 

port -- download and upgrade your MFJ-998 

as new features are introduced! 

Plus Much More! 

Built-in radio interface provides control 

of most amateur transceivers. 

Automatic bypassing when excessive 

tuning power or power in excess of 1500 

watts is applied. 

Use balanced line antennas with external 

MFJ-912, $69.95, 1.5 kW 4:1 balun. 

2 MFJ . . . The World Leader in Ham Radio Accessories! 

MFJ-998 is the smallest 

full legal-limit autotuner 

in the world! 

13Wx4Hx15D inches fits 

easily into your ham station. 

Weighs just 8 pounds 

-- great portability! 

Requires 12-15VDC at 1.4 

amps maximum or 110 

VAC with MFJ-1316, 

$21.95. 

Back view of MFJ-998 

An Inside view of MFJ-998 

Pre-wired Rig Interface 

Cables for MFJ-929/998 

These cables work with the following 

MFJ Automatic tuners: MFJ-929, MFJ-928, 

MFJ-925, and the MFJ-998. 

MFJ-5114K, $19.95. Prewired Interface 

cable for Kenwood TS-590 and compatibles. 

MFJ-5114I, $19.95. Prewired Rig 

Interface cable for Icom and compatibles. 

MFJ-5114Y, $19.95. Prewired Rig 

Interface cable for Yaesu FT-450, FT-950 and 

other compatibles except FT-847. 

MFJ-5114Y2, $19.95. Prewired MFJ-998 to 

Yaesu FT-847 only. 

MFJ-5114Y3, $19.95. Prewired MFJ-998 to 

FT-1000MP, FT-9000 Yaesu rigs. 

MFJ-5114Y4, $19.95. Prewired MFJ-998 

to FT2000 Yaesu rigs. 

MFJ 1500 Watts Remote Automatic Tuner 

MFJ-998RT 

$ 769 95 

Ship Code D 

MFJ-998RT Remote 

IntelliTuner TM handles 

legal limit power 

CW/SSB. It’s the perfect 

match for Ameritron’s 

ALS-1300, AL-80B, AL-82, AL-1200 and 

AL-1500 legal limit amplifiers. 

MFJ’s 1500 Watt remote automatic 

antenna tuner is built into a weather-tight 

ABS plastic cabinet top with a stainless 

steel bottom. Includes MFJ-4117 BiasTee 

power injector to send DC/RF down the coaxial 

line. Weighs 9.5 pounds. Large and in charge -tough 

ABS plastic cabinet and stainless steel 

chassis measures 13 1 /4Wx6 3 /4Hx17 1 /2D inches. 

The MFJ-998RT Full Legal Limit 1500 Watt 

IntelliTuner TM takes you to the final level in automatic 

antenna tuners. With a capability of 1500 

Watts SSB and CW, coupled with automatic tuning, 

your high power station can now operate 

essentailly hands-free even when frequency and 

band changes are made. MFJ-998RT instantly 

matches impedances from 12-1600 Ohms using 

MFJ’s exclusive IntelliTune TM , AdaptiveSearch TM 

and InstantRecall TM algorithms with over 20,000 

VirtualAntenna TM Memories. MFJ-998RT has 

one coax antenna and a binding post connector 

for long wire antennas. See page 5 for more info.

MFJ IntelliTuner TM Automatic Tuner 

Automatically tunes unbalanced/balanced antennas . . .Ultra fast . . . New 20,000 memories . . . 

Antenna Switch . . . Efficient L-network . . . Select 300 Watts (6-1600 Ohms) or 150 Watts 

(6-3200 Ohms) . . . 1.8-30 MHz . . . 4:1 current balun . . . Cross-Needle and Digital SWR/ 

Wattmeter . . . Audio SWR meter . . . Backlit LCD . . . Remote control port . . . Radio interface . . . 

World’s First dual power level 

300/150 Watts SSB/CW Tuner -- 

Select 300 Watt SSB/CW power level 

and match 6-1600 Ohm antennas Or . . . 

select 150 Watt SSB/CW power level and 

match extra wide-range 6-3200 Ohms! 

The MFJ-993B IntelliTunerTM lets you 

tune any antenna automatically balanced or 

unbalanced -- ultra fast. 

It’s a comprehensive automatic antenna 

tuning center complete with SWR/Wattmeter, 

antenna switch for two antennas and 

4:1 current balun for balanced lines. 

MFJs exclusive IntelliTunerTM , Adaptive 

SearchTM and InstantRecallTM algorithms 

give you ultra fast automatic tuning with 

over 20,000 VirtualAntennaTM Memories. 

You get a highly efficient L-network, 6- 

1600 ohm matching at 300 Watts SSB/CW 

or extra-wide 6-3200 Ohm matching at 150 

Watts SSB/CW, 1.8-30 MHz coverage, Cross- 

Needle and digital meters, audio SWR meter, 

backlit LCD, remote control port, radio 

interface, heavy-duty 16 amp/1000V relays. 

It learns while you’re having fun 

As you’re ragchewing, contesting or 

DXing, your MFJ-993B is learning! 

When you transmit, the MFJ-993B automatically 

tunes for minimum SWR and 

remembers your frequency and tuner settings. 

The next time you operate on that 

frequency and antenna, these tuner settings 

are instantly restored and you’re ready to 

operate in milliseconds! 

MFJ new VirtualAntennaTM Memory system 

gives you 4 antenna memory banks for each 

of 2 antenna connectors. Select up to 4 

antennas on each antenna connector. Each 

antenna has 2500 memories, 20,000 total. 

Intelligent ultra fast tuning 

MFJs InstantRecallTM first checks its 

memory to see if you have operated this frequency 

before. If so, tuning is instant-aneous 

and you’re ready to operate. 

If not, MFJs IntelliTunerTM algorithm - - 

based on MFJ s famous SWR Analyzer 

technology - - kicks in. It measures the 

complex impedance of your antenna. Next, 

it calculates the components it needs and 

instantly snaps them in. Then, it fine tunes 

to minimize SWR -- you’re ready to oper- 

MFJ-993B 

$ 259 95 

ate. It’s all 

done in a fraction 

of a second. 

When the 

impedance is 

within its 

measurement 

range, the 

MFJ-993B is 

the fastest automatic 

antenna 

tuner in the 

world. 

If it can’t accurately determine impedance, 

MFJ’s AdaptiveSearchTM Ship Code C 

algorithm 

goes into action. Frequency is measured 

and relevant components values are determined. 

Only those values are searched for 

ultra-fast tuning. 

For even faster searches, you can set the 

target SWR to 2 (settable 1.0-2.0). 

You can manually tune when you can’t 

transmit (for listening out of ham bands). 

Cross Needle and Digital 

SWR/Watt Meters 

Lighted Cross-Needle and digital meters 

lets you accurately read SWR, forward and 

reflected power at a glance. 

An audio SWR meter lets you hear the 

tuned SWR when you can’t see/read meters. 

Turn on a highly visible, instant response 

SWR LCD bargraph when you need it. 

Backlit LCD Display 

An easy-to-read backlit LCD displays 

SWR, forward/reflected power, frequency, 

antenna 1 or 2, L/C tuner values, on/off 

indicators and other information. 

The MFJ-993B is a compact 10Wx2¾ 

Hx9D inches. Use 12 –15 VDC/1 amp or 

110 VAC with MFJ-1316, $21.95. 

Tune any Antenna 

You can tune any antenna — dipoles, 

verticals, beams, phased arrays, inverted 

vees, quads, random wires, mobile antennas, 

compact limited space antennas. 

A 4:1 true current balun lets you tune 

600 Watt MFJ Automatic Tuner 

MFJ-994B, 600 Watt 

Intelli-TunerTM ! automatic 

antenna tuner with new 

10,000 VirtualAntennaTM MFJ-994B 

$ 95 359 

Ship Code C 

Memories. Like MFJ- 

993B but handles 600 Watts SSB/CW, matches 12-800 Ohms. Does not have digital 

SWR/Watt-meter/LCD display, audio SWR meter/audio feedback, antenna switch or 4:1 

current balun. Tuning must be done at low transceiver power with amplifier bypassed. 

any balanced antenna - - horizontal 

loops, vertical loops, multi-band doublets, 

quads, folded dipoles, Zepps. 

Remote Control 

Plug in the MFJ-993RC, 

$39.95, remote control and 

use your tuner elsewhere 

remotely. 

MFJ-993B Interface Pre-wired Cables 

Allows automatic tuning of your MFJ- 

991B/993B/994B IntelliTuner TM through radio. 

MFJ-5124I, $19.95, ICOM. Supports 

IC-706, 707, 718, 725, 728, 736, 746, 756, 

765, 775, others that support AH-3 or AH-4. 

MFJ-5124A, $19.95, ALINCO. 

Supports DX-70, DX-77 and others. 

MFJ-5124K, $59.95, KENWOOD. 

Supports TS-50S, 450S, 570S, 690S, 850S, 

870S, 2000 and others that support AT-300. 

MFJ-5124Y, $59.95, YAESU. Supports 

FT-100D, FT-450, FT-857D, FT-897, FT- 

950 and other compatibles. 

MFJ-5124Y2, $59.95, YAESU FT-847. 

MFJ-5124Y3, $19.95, Supports YAESU 

FT-1000MP and compatibles. 

MFJ-5124Y4, $19.95, Supports Yaesu 

FT2000 and compatibles. 

Dual 300/150 Watt 

Automatic Tuner 

World’s First 

dual power level Tuner -- 


$ 219 95 

Ship Code C 

Select 300 Watt SSB/CW 

and match 6-1600 Ohm 

antennas Or select 150 Watt 

SSB/CW and match extra 

wide-range 6-3200 Ohms. 

New 10,000 VirtualAntenna TM Memories. 

Like MFJ-993B, less digital 

SWR/Wattmeter/ LCD display, audio SWR 

meter/audio feedback, antenna switch or 

4:1 current balun. 

http://www.mfjenterprises.com 3

MFJ Compact 200 Watt IntelliTuners TM 

Automatically tunes any unbalanced antenna . . . Ultra fast . . . 20,000 VirtualAntenna TM 

Memories . . . Antenna Switch . . . Efficient L-network . . . Matches 6-1600 Ohms at 200 

Watts . . . 1.8-30 MHz . . . Digital SWR/Wattmeter . . . Audio SWR meter . . . Radio interface . . . 

The MFJ-929 IntelliTuner-CompactTM lets you automatically tune any coax fed or 

random wire antenna 1.8-30 MHz at full 

200 Watts SSB/CW. It can match 6-1600 

Ohms (SWR up to 32:1) - - that's a 50% 

wider matching range at a higher power 

level than lesser competing products. 

You get a digital SWR/Wattmeter with 

backlit LCD, antenna switch for 2 antennas, 

built-in radio interface and built-in 

internal BiasTee for remote tuner operation. 

MFJ's exclusive IntelliTuneTM , Adaptive 

SearchTM and InstantRecallTM algorithms 

give you ultra-fast automatic tuning with 

over 20,000 VirtualAntennaTM Memories. 

MFJ VirtualAntennaTM Memory 

MFJ new VirtualAntennaTM Memory system 

gives you 4 antenna memory banks for 

each of 2 antenna connectors. You can 

select up to 4 antennas on each antenna 

connector. Each antenna has 2500 memories. 

4 Times the Solutions! 

MFJ-929 gives you 256 values each of 

capacitance and inductances for 131,072 

matching solutions. That's 4 times the 

32,768 matching solutions of competing 

products with only 128 L/C values each! 

Highly intelligent, ultra-fast tuning! 

Don't be fooled by competing products 

claiming fast search times -- if you have a 

quarter of the matching solutions, of course, 

it takes less time to finish but it's not faster. 

MFJ's faster speed comes from 

advanced technology and software algorithms 

not from fewer matching solutions. 

MFJ's IntelliTuner-CompactTM actually 

measures complex impedance -- R and X -of 

your antenna, computes the L-network 

values needed and snaps in those components 

to give you an instant match. 

If the load is out of measurement range, 

AdaptiveSearchTM determines the smaller subset 

from all solutions that can match a safe 

load -- and then searches only that subset -others 

search through far more solutions. 

Digital LCD SWR/Wattmeter 

An easy-to-read, two-line, 16-character 

backlit LCD displays SWR, peak or average 

forward/reflected power, frequency, antenna 

1 or 2, L/C tuner values, on/off indicators 

and other info. They are selected from 

easy-to-understand menus -- not complex 

combinations of buttons you can’t remember. 

A fast-response, high-resolution bargraph 

4 


$ 219 95 

Ship Code B 

gives you an auto-ranging 

20/200 Watt power 

meter. You get 60 

segments each for for- 

ward and reflected power and 36 segments 

for SWR -- try that with an 8 segment 

bargraph that makes you change 

power ranges and doesn’t even give you 

reflected power! 

You can read inductance and capacitance 

directly in uHy and pF. This turns 

you into an expert L-network designer! 

Match your load, read the resulting L/C 

values, then use them to build your fixed 

L-network. 

Or, knowing the L/C values you can 

determine R and X of the load impedance. 


StickyTune TM mode gives you one-hand 

tuning by locking the TUNE button -- just 

transmit to tune regardless of SWR. 

Has audio SWR meter and audio feed 

back. Competing products don’t. 

Built-in 50 MHz frequency counter. 

Its built-in radio interface lets you use a 

simple wire cable to compatible rigs. Others 

require a cable with expensive electronics. 

Binding post for random wire. Self-test. 

Highly efficient L-network. 10 Amp/1000V 

relays, RF duty silver mica capacitors. 6 1 /2 

Wx2 7 /8Hx8 3 /8D in. 2.4 lbs. 12-15 VDC/ 

1Amp or 110 VAC with MFJ-1316, $21.95. 

MFJ Basic IntelliTuner TM 


$ 199 95 

Ship Code A 

Like MFJ- 

929, but less LCD display, has manual tune 

buttons. Unit is the same size as the MFJ- 

929. 

MFJ-925, $179.95. 

MFJ-925 has been designed for today's 

compact base, portable and mobile stations. 

Many radios these days are tinier than the 

average accessory. 

At just 6 1 /2Wx2 1 /8Hx8 1 /4D inches, the 

MFJ-925 IntelliTuner TM specifically complements 

today's compact HF transceivers, 

such as the Icom IC-706MKIIG, IC-7000, 

Yaesu FT-857D, Alinco DX-70TH and 

MFJ . . . The World Leader in Ham Radio Accessories! 

MFJ Weather Protected 

Remote IntelliTuner TM 


$ 259 95 

Ship Code C 

MFJ-927, $259.95. Weather protected 

remote auto tuner for coax/wire ant., includes 

MFJ-4116 Power Injector. Most MFJ-929 

features, weather protected, no LCD/buttons. 

MFJ-4116, $24.95. Power Injector for remote 

MFJ-929/928 use. Sends DC/RF down coax. 

Pre-wired Rig Interface 

Cables for MFJ-929 series 

These cables work with the following 

MFJ Automatic tuners: MFJ-929, MFJ-928, 

MFJ-925, and the MFJ-998. 

MFJ-5114K, $19.95. Prewired Rig 

Interface cable for Kenwood TS-590 and other 

compatibles. 

MFJ-5114I, $19.95. Prewired Rig 

Interface cable for Icom and other compatibles. 

MFJ-5114Y, $19.95. Prewired Rig 

Interface cable for Yaesu FT-950, FT-450. 

MFJ-5114Y2, $19.95. For Yaesu FT-847. 

MFJ-5114Y3, $19.95. Prewired MFJ-929 

to FT-1000MP, FT-9000 Yaesu rigs. 

MFJ-5114Y4, $19.95. Prewired MFJ- 

929 to FT2000 and other Yaesu rigs. 

Super-Compact 

MightyMite TM Inte liTuner TM 

Just 6 1 /2Wx2 1 /8Hx8 1 /4D inches and lightweight 2.5 lbs gives 

you a super automatic tuner in a tiny package . . . it many of 

the features of its big brothers, but still fits virtually anywhere 


$ 179 95 

Ship Code A 

Kenwood TS-50S. 

It can also be used as a 

stand-alone automatic 

antenna tuner for any 

transceiver that has an 

output power of 2-200 watts SSB/CW 

from 1.8-30 MHz with antenna impedances 

from 6-1600 ohms. 

With more than 10,000 non-volatile 

VirtualAntenna TM Memories, and MFJ's 

exclusive InstantRecall TM , IntelliTune TM 

and AdaptiveSearch TM algorithms, the 

MFJ-925 gives you fast automatic tuning 

of unbalanced or single-wire antennas. 

Dynamite comes in small packages! 

Use an optional MFJ-911H, $34.95 

(See page 66 for more details), 1:1/4:1 

external balun for balanced feedlines.

MFJ 1500 Watt Remote Auto Tuner 

Place this MFJ-998RT remote tuner at your antenna to match high 

SWR antennas/long coaxes -- greatly reduce losses for high efficiency 

. . . Match 12-1600 Ohms, 1.5 kW, SSB/CW, 1.8-30 MHz . . . Match coax/wire antennas . . . 

Weather-sealed . . . Remotely powered thru coax . . . Amplifier, radio, tuner protection . . . Output 

static/lightning protection . . . StickyTune TM always tunes when power folds back . . . DC power jack . . . 

New! 

Tune your antenna AT your antenna! 

Get greatly reduced losses and high 

efficiencies with long coax runs and high 

SWR antennas with this new MFJ- 

998RT 1.5 kW Remote Antenna Tuner. 

Weather-Sealed 

A tough, durable weather-sealed ABS 

cabinet with over-lapping lips, sealing gasket 

and stainless steel chassis protects the 

MFJ-998RT from all kinds of weather. 

No Power Cable Needed! 

No power cable needed -- remotely powered 

through coax. Includes MFJ-4117 Bias- 

Tee with on/off switch for station end of coax. 

Has 12 VDC jack for power cable, if desired. 

Fully Protected 

MFJ exclusive algorithms protect your 

tuner, radio and RF power amplifier from 

MFJ-994BRT -- It’s 

perfect for 600 Watt 

SSB/CW amplifiers like 

Ameritron’s AL-811/ALS- 

600/ALS-500M. 

Matches 12-800 Ohms. Coax/wire 

antennas, 1.8-30 MHz. 

Fully weather-sealed for outdoor use. 

Remotely powered through coax. 

Tough, durable, built-to-last cabinet, 

91 /4Wx3Hx 141 MFJ-994BRT 

$ 95 399 Ship Code C 

/4D inches, 4 lbs. 

Includes MFJ-4117 BiasTee Power 

Injector. 

damage. 

Automatic inductor and capacitor limiting 

prevents tuning extreme loads which 

can destroy your tuner. 

Your tuner will not tune if more than 75 

Watts with SWR greater than 3:1 is applied 

or if more than 125 Watts is applied. 

Tuner output is static electricity and 

lightning induced surge protected. 

MFJ exclusive StickyTune TM 

Very high SWR can fold back transmitter 

power and prevent tuning caused by 

extreme differences in loads (example: 

changing bands and other conditions). 

But MFJ exclusive StickyTune TM always 

tunes with a simple on/off power cycle and 

re-transmit. 

Tunes Coax fed and Wire Antennas 

Tunes both coax fed and wire antennas. 

Has ceramic feed-through insulator for 

wire antennas. 2 kV Teflon (R) insulated SO- 

239 -- prevents arcing from high SWR. 

High Power, Highly Efficient 

A highly efficient L-network matches 6- 

600W Remote IntelliTuner TM 300W Remote IntelliTuner TM 

New! 

MFJ-998RT 

$ 769 95 

Ship Code D 

MFJ-993BRT handles 

300 Watts SSB/ CW. 

Matches an extra-wide 

6-1600 Ohm impedances. 

Use coax fed or wire antennas 

from 1.8-30 MHz. 

MFJ-993BRT 

$ 299 95 

Ship Code C 

Fully weather-sealed for remote outdoor 

or marine use. 

Remotely powered through coax. 

Tough, durable, built-to-last cabinet measures 

9 1 /4Wx3Hx14 1 /4D inches. 

Weighs just 4 pounds. Includes MFJ- 

4117 BiasTee Power Injector. 

Bottom Chassis 

New! 

Inside View 

1600 Ohms at full 1500 Watts 

legal limit SSB/CW 1.8 to 30 MHz with 

Hi-Q Ls, Cs. 

MFJ-998RT Learns as you Operate 

As you operate, the MFJ-998RT automatically 

tunes for minimum SWR and remembers 

your frequency and tuner settings. 

The next time you operate on that frequency 

and antenna, its tuner solution is restored in 

milliseconds and you’re ready to operate! 

Highly Intelligent, Ultra-fast Tuning 

MFJ InstantRecall TM recalls stored tuning 

solutions from 10,000 memories. For 

new frequencies, MFJ Intelli-Tune TM measures 

your antenna impedance and instantly 

determines the correct matching components. 

If antenna impedances cannot be 

measured, MFJ AdaptiveSearch TM searches 

only the relevant components that can match 

your antenna giving you ultra-fast tuning. 

Field upgradeable firmware. Requires 

12-15 VDC at 1.4 Amps maximum or 110 

VAC with optional MFJ-1316, $21.95. 

Weighs 9.5 lbs. 13 1 /4Wx6 3 /4Hx17 1 /2D inches. 

200W Remote IntelliTuner TM 

New! 

MFJ-926B, 200 MFJ-926B 

Watts SSB/CW, $ 95 

matches 6-1600 279 Ship Code C 

Ohms, Coax/wire 

antennas, 1.8-30 MHz. Includes BiasTee. 

200W Remote Econo Tuner TM 

MFJ-927, 200 Watts 

SSB/CW, 6-1600 Ohms, 

Coax/Wire antennas, 

1.8-30 MHz. Weather-sealed, 

BiasTee. 71 /2Wx51 /4Hx81 MFJ-927 

$ 95 259 

/2D in. 

MFJ . . . The World Leader in Ham Radio Accessories! 5

MFJ-989D 1500 Watt legal limit Antenna Tuner 

New and improved! World’s most popular legal limit antenna tuner just got better -with 

no increase in price! You get better efficiency, lower losses, and a new true peak-reading 

meter. Easily handles full 1500 Watts SSB/CW, 1.8 to 30 MHz including MARS/WARC bands. 

• New 500 pF air variable capacitors 

• New AirCore TM Roller Inductor with 

new fast-tune Crank Knob 

• New TrueActive TM Peak-Reading 

Cross-Needle SWR/Wattmeter with 

new Super-bright LED 

• New High-Voltage Current Balun 

• New rugged Cabinet maintains hi-Q 

Made in the U.S.A. 

The world’s most popular legal limit 

antenna tuner just got better -- much better 

-- with no increase in price! 

You get better efficiency, lower losses 

and a new true peak reading SWR/Wattmeter. 

It easily handles full 1500 Watts 

SSB/CW and covers 1.8 to 30 MHz, 

including MARS and WARC bands into 

balanced or unbalanced loads. 

You can match dipoles, verticals, 

inverted vees, random wires, beams, balanced 

lines, coax, mobile whips, shortwave 

-- nearly any antenna. 

You get everything you’ve ever wanted 

in a high power, full featured antenna 

tuner -- extremely wide matching range, 

lighted Cross-Needle SWR/Wattmeter, 

antenna switch, dummy load and balun. 

Massive Transmitting Capacitors 

New huge 500 pF air variable capacitors 

give you twice the capacitance for much more 

efficient operation on 160 and 80 Meters. 

Specially shaped plates give low minimum 

capacitance resulting in an extremely 

wide matching range -- 160 thru 10 Meters. 

New larger, more attractive capacitor 

knobs with easy-to-see dials make tuning 

much easier and precise. 

MFJ AirCore TM Roller Inductor 

with new fast-tune Crank Knob 

New and improved AirCore TM Roller 

Inductor gives you lower losses, higher Q 

and handles more power with no self-resonances. 

It gives you cool, efficient and 

smooth tuning on all bands and it’s air core 

can’t burn up! 

Patent Pending 

Large, self-cleaning MFJ-989D 

wiping contact gives $ 95 

excellent low-resistance 389 connection without contact Ship Code D 

arcing or burning. 

New fast-tune crank knob lets you reset 

your roller inductor quickly, smoothly and 

accurately. 

A precision gear driven 3-digit turns 

counter lets you accurately reset your roller 

inductor for quick band changing. 

TrueActive TM Peak Reading 

SWR/Wattmeter 

New TrueActive TM peak reading SWR/ 

Wattmeter lets you read true peak or average 

power on all modes. Large, easy-toread 

super-bright LED lighted Cross- 

Needle meter lets you read SWR and forward/reflected 

(3000/ 300 Watt ranges) 

power at a single glance. Uses 9-Volt 

battery and/or 12 VDC or 110 VAC with 

MFJ-1312D, $15.95. 

MFJ High Voltage 

Current Balun 

New high voltage 

current balun lets you 

tune high and low 

impedance balanced 

lines without core saturation 

or voltage 

breakdown. 

It’s constructed 

with two giant 2 1 /2 

inch toroid cores and 

wound with high voltage 

wire connected to 

high-voltage glazed 

ceramic feedthrough 

insulators. 

Super Antenna 

Switch 

MFJ-989D’s 

super heavy duty 

antenna switch is 

made of two individual 

ceramic wafers 


wired in parallel. Extra wide spaced, heavy 

duty contacts handle extreme voltages and 

currents. We’ve never burned one up! 

You can select two coax antennas 

(directly or through tuner), balanced line/ 

random wire, or built-in dummy load. 

Built-in Dummy Load 

A full-size 300 Watt non-inductive 50 

Ohm dummy load is built-in. 

You’ll find it handy for transmitter 

tuning, testing and repairing rigs, setting 

power level, adjusting mic gain and more. 

New Cabinet maintains high Q 

New roomy cabinet helps maintain 

components’ high Q. Vent holes keeps 

components cool. Super construction -non-stripping 

PEM nuts, wing-nut ground 

post, fire-retardant epoxy glass PC board, 

and heavy gauge wire throughout. 

Measures 12 7 /8Wx6Hx11 5 /8D inches. 

Lexan Front Panel 

The MFJ-989D has a new nearly indestructable 

multi-color Lexan front panel. 

Its detailed logging scales and legends will 

be legible for a lifetime of DXing. 

Wide Range T-Network 

The MFJ-989D uses the time-tested 

wide range T-Matching Network. It gives 

you the widest matching range and is the 

easiest to use of all matching networks. With 

MFJ’s new high value 500 pF air variable 

capacitors and new low loss roller inductor, 

it easily handles high power efficiently. 

No Matter What TM Warranty 

Every MFJ tuner is protected by 

MFJ’s famous one year No Matter 

What TM limited warranty. We will repair 

or replace your MFJ-989D no matter 

what (at our option) for one full year. 

Patent Pending

MFJ KW Differential-T TM Antenna Tuner 

. . . Gives you absolute minimum SWR . . . Simple 2-knob tuning . . . Lighted 

Cross-Needle SWR/Wattmeter . . . AirCore TM Roller Inductor . . . 6-position 

antenna switch . . . Balun for balanced lines . . . 1.8-30 MHz coverage 


$ 349 95 

MFJ’s innovative 

Differential-TTM tuner 

uses a differential 

capacitor that makes 

tuning easier than 

ever. Gives minimum 

SWR at only one setting. 

Broadband 

design ends constant 

retuning. 

The MFJ-986 is a 

rugged roller inductor 

antenna tuner that handles 3 KW PEP SSB 

amplifier input power (1500 Watts PEP SSB 

output power). Tunes 1.8-30 MHz continuously, 

including MARS and all the WARC 

bands. 

TM MFJ’s exclusive AirCore Roller 

Inductor gives absolute minimum SWR -something 

tapped inductors just can’t do. 

3-digit turns counter plus a spinner knob 

gives precise inductance control so you can 

quickly retune your frequency. 

A super-bright LED lighted peak/average 

reading cross-needle meter shows SWR, forward 

and reflected power at a single glance! 

You get a 6-position antenna switch that 

lets you select two coax lines and/or random 

wires (direct or through tuner), balanced line 

and external dummy load. 

The MFJ TrueCurrentBalunTM for balanced 

lines minimizes feedline radiation that 

causes field pattern distortion, TVI and RF in 

your shack. Ceramic feedthru insulators for 

balanced lines withstand high voltages and 

temperatures. 

Differential-T TunerTM Ship Code E 

. . . . 

A new twist on proven technology 

Replacing two variable capacitors with a 

single differential capacitor gives wide range 

T-network tuning with just two controls -- a 

tuning capacitor and a roller inductor. 

Simple 2-knob tuning makes tuning easier 

than ever. You get minimum SWR at only one 

setting and a broadband 

response that ends constant 

retuning. You’ll spend 

your time QSOing instead 

of fooling with your tuner. 

The compact 

10 3 /4x4 1 /2x15 inch cabinet 

has plenty of room to 

mount the roller inductor 

away from metal surfaces 

for highest Q -- you get 

high efficiency and more 

power into your antenna. 

Wide-spaced tuning capacitor 

plates let you run high 

power without arcing. 

Lighted cross-needle meter 

MFJ’s super-bright LED lighted Cross- 

Needle Meter shows you SWR, forward and 

reflected power simultaneously. It reads peak 

or average power on 2000 or 200 Watt ranges. 

Lamp has on/off switch and uses 12 VDC 

or 110 VAC with MFJ-1312D, $15.95. 

MFJ TrueCurrentBalun TM 

reduces feedline radiation 

Most tuners use a voltage balun that 

forces equal voltages on the two antenna 

halves. It minimizes unbalanced currents 

only if the antenna is perfectly balanced -- not 

the case with practical antennas. 

The MFJ-986 uses a true current balun to 

force equal currents in the two antenna halves 

-- even if the antenna is not perfectly balanced! 

The MFJ TrueCurrentBalun TM gives superior 

balance over voltage baluns and minimizes 

unbalanced current. This reduces field 

pattern distortion, concentrates your power for 

a stronger signal -- plus it reduces TVI and 

RF in your shack caused by feedline radiation. 

No Matter What TM Waranty 

Protected by one year limited warranty. 

Call your dealer for your best price! 

In stock at ham dealers everywhere. 

MFJ-962D Compact Tuner for Linear Amplifiers 

MFJ AirCore TM Roller Inductor, Compact Size, Lexan scratch-proof front panel . . . 

MFJ-962D 

$ 299 95 

Ship Code C 

Why settle 

for a 

mere 300 

Watt antenna 

tuner when a 

few extra 

dollars let 

you add real 

power when 

you’re ready? The MFJ-962D lets you use your 

barefoot rig now, then when you’re ready . . . 

When you’re ready . . . you can add a powerhouse 

linear amplifier at no additional cost. 

The compact MFJ-962D handles 1500 Watts 

PEP SSB amplifier input power (800 Watts PEP SSB amplifier output 

power). 

It’s perfect for AMERITRON’s best selling 800 Watt AL-811H or 

600 Watt AL-811 amplifiers. 

Features MFJ’s AirCore TM Roller Inductor, new aluminum-skirted 

MFJ AirCore TM roller inductor 

MFJ’s exclusive super heavy duty 

AirCore TM Roller Inductor has an air 

core that can’t burn up! You get ultra 

high-Q, the lowest loss, highest efficiency 

and highest power handling of any 

roller inductor in ham radio. 

MFJ’s exclusive Self-Resonance 

Killer TM keeps potentially damaging 

self-resonances away from your operating 

frequency. 

Large, self-cleaning wiping contact 

gives excellent low-resistance connection 

without contact arcing or burning. 

A solid 1/4 inch brass shaft with 

self-align bearings gives smooth nonbinding 

rotation. 

. . . handles AMERITRON’s AL-811H! 

knob set including a weighted deluxe spinner knob, ultra compact size 

(10 3 /4 x4 x 10 7 /8 inches) and scratch-proof nearly indestructible multicolored 

Lexan front panel. 

Two transmitting tuning capacitors and MFJ’s exclusive AirCore TM 

roller inductor gives you precise control to get your SWR down to an 

absolute minimum. 

You get an extremely wide matching range from 1.8 to 30 MHz 

continuously, including MARS and WARC bands. 

MFJ’s AirCore TM roller inductor has an air core that can’t burn up. 

You get ultra high-Q, low loss and MFJ’s exclusive Self-Resonance 

Killer TM that eliminates damaging self-resonances. 

MFJ’s super-bright LED lighted peak and average reading Cross- 

Needle SWR/Wattmeter makes tuning quick and easy. At one glance 

you can read SWR, forward and reflected power in two power ranges. 

Meter LED uses 12 VDC or 110 VAC with MFJ-1312D, $15.95. 

A 6-position ceramic antenna switch lets you select 2 coax lines 

(direct or through tuner), random wire and balanced lines. 

You get a heavy duty MFJ TrueCurrentBalun TM for balanced lines. 

High-voltage ceramic feedthru insulators let you operate high power 

into balanced feedlines. 

www.mfjenterprises.com • Toll-free 1-800-647-1800 7

MFJ 2500 Watts ContinuousCarrier TM Tuner 

Silver plated Edge-Wound Roller Inductor . . .1000/500 pF Variable Capacitors . 

. . Antenna Switch . . . 4-Core Balun . . . true Peak Cross-Needle SWR/Wattmeter 

. . . Dummy Load . . . Extremely Wide Matching Range . . . Patent Pending . . . 

The MFJ-9982 

ContinuousCarrierTM MFJ-9982 

antenna $ 95 

tuner handles 2500 Watts 699 Ship Code F 

continuous carrier output on 

all modes and all HF bands into most 

unbalanced antennas -- even on 160 Meters 

where even the best antenna tuners fail! 

The MFJ-9982 gives you every feature 

you'll ever want in a high power tuner -wide 

matching range, 1.8 to 30 MHz coverage, 

6-position antenna switch, 4-core 

balun, dummy load, true peak/average 

lighted SWR/Wattmeter, 6:1 reduction 

drives with detailed logging scales, 3digit 

turns counter, extra large knobs. 

New Components, New Technologies 

The Heart and Soul of the MFJ-9982 is 

its roller inductor and variable capacitors. 

MFJ's high power, high-Q continuous 

current AirCore 

Antenna Tuner/Artificial Ground 

TM roller inductor is no ordinary 

roller inductor! It’s edge wound from 

thick .06-inch silver-plated solid copper strap. 

It can carry huge circulating RF currents 

and withstand tremendous heat that'll melt 

or burn up ordinary roller inductors. 

Self-insulating construction reduces stray 

capacitance -- keeps self-resonant frequencies 

high and out-of-the-way. Dual, silver-plated 

compression wheels give ultra low-resistance 

contacts. New fast-tune crank knob. 

High-current, high-capacitance 1000 pF 

and 500 pF air variable capacitors have low 

minimum capacitance and are self-insulating. 

These newly developed capacitors and 

MFJ's patent pending innovation gives you 

very high efficiency on 160/80 Meters and 

extremely wide matching range on 10/12/15 

Meters at 2500 Watts -- a feat only the 

MFJ-9982 has achieved. 

Hi-Voltage/Current Antenna Switch 

The antenna switch is completely isolated 

to handle high-voltage high impedance 

antennas. High-current, low impedance 

antennas are handled by parallel sets of highcurrent 

contacts of two ceramic switches. 

New 4-Core Balun 

Powerful balun -- Four 2 

MFJ Artificial RF Ground 

1 /2 inch cores, 

12-gauge TeflonTM wire. Run balanced lines 

at full 2500 Watts SSB/CW continuous, 24/7. 

New Balanced Line Feed-Thru Insulator 

Allows massive antenna currents to flow 

directly to the antenna capacitor without 

passing though lossy screws or bolts. 

TrueActiveTM Peak Reading Circuit 

New TrueActiveTM circuit reads true peak 

or average power on all modes. Super-bright 

LED lighted Cross-Needle meter reads 

SWR/forward/reflected power. 

1500 Watt Dummy Load 

1500 Watt air-cooled non-inductive 50 

MFJ-934 is unique because it has a 

built-in artificial ground. A ground matching 

knob lets you switch in inductance to 

bring an attached wire to a low impedance 

current point to form an artificial ground. 

A push button lets you use the Cross- 

Needle Meter to monitor for maximum 

ground current. With an artificial ground 

to work against, you’ll be surprised to see 

how well a random wire can work. 

You get a 300 Watt full featured antenna 

tuner that covers 1.8-30 MHz. Lighted 

CrossNeedle meter reads SWR/Forward/ 

Reflected power at-a-glance. 4:1 balun for 

balanced lines. Features efficient airwound 

inductor, high current/voltage 12-position 

inductor switch and two 1000 volt air-variable 

capacitors. Tunes all antennas and 

feedlines including random wire, coax and 

balanced lines. 105 /8Wx31 Places your rig near earth ground potential! 


MFJ-934 $ 95 

$ 95 209 

109 

Ship Code B 

Ship Code B 

Create an 

artificial 

ground with 

this MFJ-931! It effectively places your 

rig near actual earth ground potential even 

if your rig is on the second floor or higher 

with no earth ground possible! It electrically 

places a far away RF ground at your rig. 

How’s your RF ground? Do you have 

RF “hot spots” that “bite” you when you 

transmit? Do you have RF feedback that 

causes your rig to quit working on some 

bands? Do you have TVI/RFI that makes 

your neighbors hard to live with? Do you 

get weak signal reports because of extreme 

ground losses or radiation pattern distortion? 

These problems could be caused by 

poor RF grounding, especially if your rig is 

on a second floor with no ground at all. 

Even if you have a good ground, a long 

/2Hx8D in. connection wire can ruin its effectiveness 

by isolating true RF ground from your rig. 

8 MFJ . . . The World Leader in Ham Radio Accessories 

Ohm resistor. 100W/10 min., 1.5kW/10 sec. 

New Cabinet maintains high Q 

New roomy cabinet maintains high Q. 

Vent holes. Heavy gauge, .08 inch aluminum 

braced chassis. Vinyl cover, nonstripping 

PEM nuts, heavy 10-gauge or 

copper strap wiring throughout. 

13¾Wx7Dx16¼D inches. 15 pounds. 

Patent Pending 

New! 4 Foot Ground Rod 

Durable four foot copper 

bonded steel earth 

ground rod is a tough 3/8 

in. diameter that will last. 

Pointed end makes it easy to drive 

into the ground. Use it to tie your 

equipment to a single earth ground to 

help bleed off static and RFI and prevent 

RF hot spots. Use several to 

form a good RF ground for random, 

long wire and vertical antennas. 


$ 9 95 

Ship Code B 

Continued . . . MFJ-931 creates an 

artificial ground! It resonates a random 

length of wire thrown along the 

floor and produces a tuned counterpoise. 

This artificial ground effectively 

places your rig near actual earth 

ground potential with no earth ground 

possible. Reduces the electrical length 

of the ground connection wire to virtually 

zero by tuning out its reactance. MFJ-931 

connects between your rig and a random 

length of wire or a connecting ground wire. 

It’s tuned for maximum ground current using 

the built-in RF ammeter. 1.8 to 30 MHz. 

7 1 /2Wx 3 1 /2 Hx7D in. RF tight alu. cabinet.

MFJ 300W Roller Inductor Tuner 

World’s only 300 Watt AirCore TM Roller Inductor Antenna Tuner gives 

you absolute minimum SWR . . . Covers 6 Meters thru 160 Meters . . . 


$ 219 95 

Ship Code C 

More hams use 

MFJ-949s than any 

other antenna tuner 

in the world! 

Why? Because 

MFJ-969 gives 

you MFJ’s superb 

AirCore TM Roller 

Inductor and full 6 

Meters through 160 

Meters coverage! 

You get everything you’ve ever wanted 

including . . . 300 Watts PEP SSB full featured 

antenna tuner, widest matching range, 

full-size lighted Cross-Needle 

SWR/Wattmeter reads true peak forward 

power, QRM-Free PreTune TM , 8 position 

antenna switch, built-in 50 Ohm dummy 

load, heavy duty 4:1 balun -- all in a tough, 

attractive cabinet. MFJ’s famous one year 

No Matter What TM limited warranty. 

MFJ-969’s AirCore TM Roller Inductor, 

gear-driven turns counter and spinner knob 

gives you exact inductance control for 

minimum SWR. 

MFJ’s exclusive AirCore TM Roller 

the world’s leading tuner has earned 

a worldwide reputation for being able 

to match just about anything. 

Full 1.8-30 MHz Operation 

Custom designed inductor 

switch, 1000 volt tuning capacitors, Teflon R 

insulating washers and proper L/C ratio 

gives you arc-free no worries operation 

with up to 300 Watts 1.8 to 30 MHz. 

Tunes any antenna 

Tunes out SWR on dipoles, verticals, 

inverted vees, random wires, beams, 

mobile whips . . . nearly anything! Use 

coax, random wire or balanced lines. Has 

heavy duty 4:1 balun. 

Custom inductor switch 

The inductor switch is the most likely 

component to burn up in any antenna tuner. 

MFJ’s inductor switch in the MFJ- 

949E was custom designed to withstand the 

extremely high RF voltages and currents 

that are developed in your tuner. 

8-Position Antenna switch 

lets you select two coax fed antennas, ran- 

Inductor has an air core that can’t burn up! 

You get ultra high-Q, the lowest loss, highest 

efficiency and highest power handling 

of any roller inductor in ham radio. 

MFJ’s exclusive Self-Resonance 

Killer TM keeps potentially damaging selfresonances 

away from your frequency. 

Huge self-cleaning wiping contact 

gives you excellent low-resistance connection 

without contact arcing or burning. 

Solid 1/4 inch brass shaft, self-align 

bearings -- smooth non-binding operation. 

The MFJ-969 covers all frequencies 

from 160 Meters thru 6 Meters, including 

the “magic band” -- the widest matching 

range of any full featured antenna tuner. 

Match any antenna 

Match dipoles, verticals, inverted vees, 

random wires, beams, mobile whips, SWL 

receiving antennas -- nearly any antenna. 

You can use coax cable, random wire or 

dom wire/balanced line or built-in dummy 

load through your MFJ-949E or direct to 

your transceiver. 

Big Lighted Cross-Needle Meter 

Has MFJ’s full size 3 inch lighted 

cross-needle Meter. Lets you easily read 

SWR, true peak forward and average 

Ship Code B 

All the 

features of 

the MFJ-949E -- the world’s leading 300 

Watt antenna tuner -- for an incredibly low 

$159.95! (Dummy load not included; coax 

balanced lines. Has heavy duty 4:1 balun. 

True Peak Reading Cross-Needle Meter 

MFJ’s new ActivePeak 

ReadingCircuit TM accurately reads true peak 

forward power -- an MFJ exclusive. 

MFJ’s lighted Cross-Needle 

SWR/Wattmeter reads SWR, true peak forward 

and average reflected power simultaneously 

on 300 Watt or 30 Watt ranges. 

Lamp has on/off switch and uses 12 

VDC or 110 VAC with MFJ-1312D, 

$15.95. ActivePeakReading Circuit TM can 

also use a 9 volt battery. 

MFJ’s 8 positions let you select two 

coax fed antennas, random wire/balanced 

line or built-in dummy load for use through 

your MFJ-969 or direct to your rig. 

MFJ’s QRM-Free PreTune TM lets you 

pre-tune MFJ-969 off-the-air into a built-in 

dummy load without causing QRM. 

Pre-tuning into a dummy load makes 

tuning your actual antenna quick and easy! 

The MFJ-969 has a full size non-inductive 

50 Ohm dummy load. You’ll find it 

handy for tuning, testing, repairing rigs, 

setting power level, adjusting mic gain, etc. 

The tough aluminum case has a 

scratch-proof multi-colored Lexan front 

panel. Compact 3 1 /2Hx10 1 /2Dx9 1 /2W inches. 

MFJ-969 AirCore TM Roller Inductor 

Ham Radio’s Most Popular 300 Watt Tuner 

More hams use MFJ-949s than any other antenna tuner in the world! 

MFJ-949E 

$ 179 95 

Ship Code B 

reflected power simultaneously 

on 300 Watt or 30 Watt ranges. 

Lamp has on/off switch, requires 

12 VDC or 110 VAC with MFJ- 

1312D, $15.95. 

QRM-Free PreTune TM 

MFJ’s QRM-Free PreTune TM 

lets you pre-tune your MFJ-949E 

off-the-air into its built-in 

dummy load! Makes tuning your 

actual antenna faster and easier. 


Full size built-in non-inductive 50 Ohm 

dummy load, scratch-proof Lexan multicolored 

front panel, superior cabinet and 

construction and more! Measures a sleek 

and compact 10 5 /8x3 1 /2x7 inches. 

MFJ-948 -- An Econo MFJ-949E for Only $159.95! 


$ 159 95 

connector for one on rear panel.) 

Features include custom 

designed inductor switch, 600 volt 

tuning capacitors, full size 3 inch 

lighted Cross-Needle meter, 8 

position antenna switch, heavy 

duty 4:1 balun, full 1.8 to 30 MHz 

operation, MFJ’s famous No Matter What TM 

one year limited warranty. Measures a slim 

and compact 10 1 /2x3 1 /2x7 inches. 


MFJ Compact Mobile HF Antenna Tuner 

Covers HF and 6 Meters, Handles 300 watts, Has Antenna Bypass Switch 

The compact MFJ-945E mobile antenna 

tuner covers 6 Meters and HF (1.8- 60 

MHz), handles 300 PEP watts, and tunes 

coaxial cable-fed antennas, plus random 

wires. 

Don’t leave home without this mobile 

tuner, and have a a better trip as the MFJ- 

945E extends antenna bandwidth and eliminates 

the need to stop, go outside, and 

readjust your mobile antenna. 

The frustratingly narrow bandwidth of 

mobile antennas can be greatly broadened 

with this tuner. 

Of course, this diminutive tuner can be 

used to tune coax-fed home station antennas 

of all kinds, too, as well as random 

wires. 

The cross needle meter shows SWR, 

forward, and reflected power -- at a glance. 

The MFJ-971 is a tiny, inexpensive 

portable 200 watt PEP antenna tuner that’s 

a perfect match for today’s ultra-compact 

HF transceivers while offering features 

especially designed for the QRP operator. 

Covering 1.8 to 30 MHz, this T-match 

tuner can match coax-fed antennas, as well 

as those fed with balanced feedline, and 

random wires. Built-in 4:1 toroid balun for balanced lines. 

From the factory, the MFJ-971 offers forward power 

readings of 30 watts maximum or 300 watts, on its cross 

needle meter. You can monitor forward power, reflected 

power, and SWR simultaneously. 

For dedicated QRP operation, swapping of a jumper plug internally 

converts the maximum forward reading on the meter to 6 

watts. Great for use with MFJ’s 90/94 series of CW and SSB individual 

band transceivers. 

The meter lamp may be powered by an external 12 VDC 

It’s not just a tuner, it’s an 8-position 

antenna switch. 

The photo tells the story: you can select 

among two coaxial-fed antennas, a balanced 

line (4:1 toroid balun included) or 

random wire or an external dummy load, 

and for each you can select “direct” 

(bypassing the tuner) or “tuned.” 

This tuner is rated at 300 watts and can 

match dipoles, vees, random wires, and 

balanced and coax feedlines, from 1.8 to 30 

MHz. You get a lighted cross needle 

MFJ’s Smallest VERSA TUNER 


$ 99 95 

MFJ’s 

smallest (5x21 Ship Code B 

/2x6) and most affordable 

200 Watt PEP VERSA TUNER. 

Match dipoles, vees, random wires, 

verticals, mobile whips, beams, balanced 

and coax lines continuously 

from 1.8-30 MHz. A 4:1 balun for 

balanced lines is built into this MFJ- 

901B tuner. Three adjustment controls 

for maximum matching capability. 

It reads forward/reflected 

power in 300/60 and 30/6 

watt ranges. 

The ON/ OFF lamp 

switch is handy for 

changing light conditions in your vehicle; 

the meter lamp is 12 VDC powered with 

optional MFJ-1312D, $15.95. 

Large, conveniently-placed controls 

make tuning fast and easy. 

The bypass switch lets you bypass the 

tuner (connecting your antenna and trans- 

SWR/wattmeter 

with on/off 

switch (lamp 

uses 12 VDC or 

110 VAC with MFJ-1312D, 

$15.95). 

The meter shows SWR, and 

forward and reflected power in 300/60 and 

30/6 watt ranges selected at the front panel. 

An efficient 12 position airwound 

inductor gives low losses for more power 

out. Uses 1000 Volt capacitors. 


$ 129 95 

Ship Code B 

mitter directly) while still using its 

SWR/wattmeter. 

The back panel has SO-239 coaxial 

connectors for your transmitter and antenna 

feedline and a wing nut post for your 

ground. 

For at-home use with a random wire a 

standard banana plug fits neatly into the 

antenna jack. 

An efficient airwound inductor gives 

you lower losses for more watts output. 

The small, 8Wx2Hx6D inch black aluminum 

cabinet takes up little space. 

A mobile mounting bracket, MFJ-20, is 

$6.95. Add $2.00 shipping for the bracket 

if ordered separately. 

Has MFJ’s One Year No Matter What TM 

limited warranty. 

Portable Tuner for QRP to Full-bore Transceiver 

source if you desire (MFJ-1312D, $15.95). 

MFJ-971, while an all-around low-power 

tuner, is especially suited for MFJ transceivers 

and power packs. It matches them in size and 

styling and special brackets allow connecting 

the units together physically into an attractive 

and compact package. Optional bracket set, 

p/n: 17-9020-1 is $4.95. 

As in all good antenna tuners, three controls give flexibility 

in matching: Inductance (12 positions), Transmitter, and 

Antenna. Once you find the proper setting on each band, just 

record it for future “instant band changing.” 

Rear panel includes SO-239 coaxial jacks for transmitter 

and antenna; 2 sturdy binding posts for balanced line; another 

binding post for a random wire; ground post; 12 VDC input jack 

for meter lamp; and low/high power meter range switch. 

The MFJ-971 is backed by MFJ’s No Matter WhatTM MFJ-971 

$ 95 119 

Ship Code B 

warranty. 

Measures a tiny 6X6X2.5 inches. 

MFJ 300-Watt Super Value Versa Tuner Covers 160-10 Meters 

MFJ-941E 

$ 139 95 

Ship Code B 

The aluminum cabinet has a durable 

scratch-proof multi-color Lexan front panel 

to complement your rig and fits right into 

your station. Measures a sleek, compact 

105 /8Wx27 /8Hx7D inches. 

Operate 

all 

bands 

1.8-30 MHz -anywhere 

with any 

transceiver -- using 

a single random wire and MFJ’s 

Random Wire Tuner. Small enough to 

carry in your hip pocket. Handles 

200 watts output. Matches high or 

low impedance loads by interchanging 

input and output, so it uses SO- 

239 connectors for both. Measures a 

compact 31 /2Wx21 /4Hx51 Pre-made Premium Coax Patch Cables 

Weather resistant 50-Ohm 

Random Wire Tuner for HF 

coax patch cables with presoldered-on 

PL-259 connectors. Select length and choose 


$ 95 from RG-58, RG-8X or RG-213 type. Made in U.S.A. 

69 length 

Ship Code A 

RG-58 Price RG-8X Price RG-213 (H) Price 

3 ft. MFJ-5803 $5.95 MFJ-5803X $9.95 MFJ-5803H 12.95 

6 ft. 

9 ft. 

12 ft. 




9.95 

11.95 

12.95 

MFJ-5806X 



11.95 

13.95 

14.95 

MFJ-5806H 



15.95 

17.95 

19.95 

18 ft. MFJ-5818 14.95 MFJ-5818X 16.95 MFJ-5818H 24.95 

25 ft. 

50 ft. 



18.95 

24.95 



21.95 

29.95 



$39.95 

59.95 

100 ft. MFJ-58100 39.95 MFJ-58100X 49.95 MFJ-58100H 99.95 

/4D inches. 50 ft. MFJ-5850E 19.95 RG-58, 50 ft. open end, PL-259 on one end. 

10 MFJ . . . The World Leader in Ham Radio Accessories

MFJ tiny Travel Tuners 

New! 

Tiny 41 /2x21 /4x3 inch tuner handles full 150 Watts! Covers 80- 

6 Meters, has tuner bypass switch, tunes nearly anything! 

MFJ brings you the world’s smallest 

full power 150 Watt 80-6 Meter 

Antenna Tuner. Extra wide matching 

range lets you tune nearly any antenna. 

It’s no toy, its got guts! Built with 

real air variable capacitors (600 Volt, 

322 pF) and three stacked powder 

iron toroids to handle real power -not 

just QRP. Bypass switch lets you 

bypass tuner when you don’t need it. 

You can use nearly any transceiver 

at full power with nearly any coax 

fed or random wire antenna for 

portable, home or mobile operation. 

It’s perfect for compact rigs like 

Icom IC-706MKIIG, Yaesu FT-100D, 

Kenwood TS-50, QRP rigs and others 

with a built-in SWR meter. 

Now 

covers 6 

Meters! 

Operate anywhere, anytime with a quick easy set-up! Tune out 

SWR on your mobile whip from inside your car. 

Operate in your apartment with a wall-to-wall antenna or from 

a motel room with a wire dropped from a window or from a moun- 

Tiny Tuner with Cross-Needle 

SWR/WattMeter and 4:1 Balun 


$ 149 95 

Ship Code A 

MFJ-904H is the 

same as MFJ-902 Tiny 

Travel Tuner but has a large 1.5 inch Cross-Needle SWR/Wattmeter 

and a 4:1 balun for tuning balanced lines. 

It includes binding post connections for balanced line antennas 

and random wire antennas. 

The Cross-Needle meter shows SWR, forward and reflected 

power simultaneously at-a-glance. A push button selects forward 

or reflected power in 300/60 and 30/6 Watt ranges. Measures a 

compact 7 ¼Hx2¼Hx2¾D inches. 

Tiny Tuner with Cross-Needle SWR/Wattmeter 

MFJ-904, $129.95. Same as 

MFJ-904H, has Cross-Needle 

SWR/Wattmeter, see above in 

MFJ-904 but no balun. Measures 

7¼Hx2¼Hx2¾D inches. 

MFJ 6 Meter/VHF/UHF Antenna Tuners 

MFJ 6 Meter Antenna Tuners MFJ- 

906, $99.95. 

Six Meter 

tuner. Low 

SWR with most any coax 

fed antenna. 

You’ll get more 

power out of your transceiver 

and into your 

antenna for more DX. 

Lighted Cross- 

Needle SWR/Wattmeter 

shows SWR, forward, reflected power, 300/60 and 30/6 Watt 

ranges. Order MFJ-1312D, $15.95 for meter lamp. Built-in 

bypass switch, handles 100 Watts FM, 200 Watts SSB PEP. Works 

with solid state and tube rigs, 50-60 MHz. 8Wx21 /2Hx3D inches. 

MFJ-903, $69.95. Like MFJ-906. Less meter/bypass switch. 

Tiny 5Wx21 / 2Hx3D 


$ 95 99 Ship code A 

inches makes it great for the backpack! 


$ 109 95 

Ship Code A 

MFJ-921/924 

$ 95 89 

Ship code A 

tain top with a wire over a tree limb. 

It’s perfect for DXpeditions or field day -- packs up 

quickly and takes up little space. Helps you be prepared 

for emergencies -- this tuner and a wire antenna can be 

packed and set-up just about anywhere. 

MFJ-902B is so small and handy, 

you'll rely on it wherever you go -- easy 

to pack away in your briefcase, suitcase, 

backpack, glove compartment or desk 

drawer. 

It's tiny enough to slide in your back 

hip pocket! 4½Wx2¼Hx2 3 /4D inches. 

MFJ Tiny Tuner w/4:1 Balun 

MFJ-902H, $119.95, is 

similar to MFJ-902 but covers 80-10 Meters and has a 4:1 balun 

for tuning balanced line antennas.Binding post connections for 

balanced lines. Compact 5¾Wx2¼Hx2 ¾D inches. 

MFJ True Dual Band 

VHF/UHF 200W Antenna Tuner 


$ 199 95 

Ship Code A 

New! 


VHF/UHF Dual Band 

Antenna Tuner covers the complete 

144 MHz and 440 MHz frequency ranges. 

Built-in Cross-Needle SWR/Wattmeter measures SWR, forward 

and reflected power in two ranges: 300 or 30 Watts. Meter is usable 

for both bands 144 and 440 MHz. Handles 200 Watts. 

Designed to match a wide range of impedances for both mobile 

and base operation. Single input and output SO-239 for radio and 

antenna connection. Perfect match for today’s dual band radios with 

combined single output and dual band antennas. Wing nut post for 

ground, black aluminum cabinet, compact at 9 1 /2Wx4 1 /2Hx2 5 /8D”. 

144/220 MHz or 440 MHz Tuner 

MFJ- 

921 Dual 

Band VHF 

tuner covers 2 Meters/220 MHz. 

Built-in SWR/Wattmeter measures SWR in 2 power ranges: 

300 or 30 Watts. Meter is usable for both 144 MHz and 220 MHz 

bands. Low SWR with practically any antenna. 

Handles 200 Watts. Designed to match a wide range of impedances 

for both mobile/base operation. SO-239 input/output connectors, 

wing nut post ground. Black aluminum cabinet measures a 

compact 8x2 1 /2x3 inches -- fits just about anywhere. 

MFJ-924, $89.95. 440 MHz band only. 


MFJ Balanced Line Antenna Tuners 

Superb balance . . . Extremely wide matching range . . . Covers 1.8-54 MHz . . . 

Cross-Needle SWR Wattmeter . . . Handles 300 Watts . . . Compact size . . . 

The MFJ-974HB is a 

fully balanced true balanced 

line antenna tuner. 

It gives you superb current 

balance throughout 

its very wide matching 

and frequency range. 

Johnson Matchbox 

MFJ-974HB 

$ 209 95 

Ship Code C 

For decades, the Johnson Matchbox has 

been the standard of comparison for balanced 

line tuners. But, it had a severely 

limited matching range and covered only 

80, 40, 20, 15 and 10 Meters. 

The MFJ-974HB is its successor. It 

meets today's needs and even surpasses the 

Johnson Matchbox outstanding 

performance. 

Everything You Need 

The MFJ-974HB gives you excellent 

current balance, very wide matching 

range(12-2000 Ohms) and covers 1.8 

through 54 MHz continuously including all 

WARC bands, 160 Meters, 6 Meters and 

the new 60 Meter band. Handles 300 Watts 

SSB PEP and 150 Watts CW. 

Tuning is fast and easy - - just three tuning 

controls. You can even adjust for highly 

efficient broadband low-Q operation or 

use higher Q when you encounter extreme 

loads. 

A large three-inch lighted Cross-Needle 

SWR/Wattmeter lets you read SWR, peak 

or average forward and reflected power all 

at a glance on 300 or 30 Watt ranges. 

A ground post is provided to ground one 

output terminal so you can also tune random 

wires and coax fed antennas. 

Compact 7½Wx6Hx8D inches fits anywhere. 

The MFJ-976 is a 1500Watt full Legal 

Limit fully balanced antenna tuner. 

You get superb current balance, very 

wide matching range (12-2000 Ohms) and 

continuous 1.8-30 MHz coverage including 

all WARC bands. Handles full 1500 Watts 

SSB and CW. 

You can tune any balanced lines includ- 

Tunes any Balanced Line 

The MFJ-974HB tunes any balanced 

lines including 600 Ohm open wire line, 

450/300 Ohm ladder lines, 300/72 Ohm 

twin lead - - shielded or unshielded. 

Superb current balance minimizes feedline 

radiation that can cause troublesome 

TVI and RFI, painful RF bites, mysterious 

RF feedback problems and radiation pattern 

distortion. 

Excellent Balance, Excellent Design 

The MFJ-974HB is a fully balanced 

wide range T-Network using four gear driven 

1000-Volt air variable capacitors and 

high-Q air wound tapped inductor for 80- 

10 Meters and separate inductors for 6 and 

160 Meters. The tuning components are 

mounted symmetrically to insure electrical 

balance. 

A 1:1 current balun is placed on the low 

impedance 50 input side to convert the balanced 

T-Network to unbalanced operation. 

The balun is made of 50 ferrite beads on 

RG-303 Teflon coax to give exceptional 

and efficient isolation. It stays cool even at 

maximum power. 


$ 95 499 Ship Code E 

ing 600 Ohm 

open wire line, 

450/ 300 Ohm 

ladder lines, 

300/72 Ohm twin lead -- shielded 

or unshielded. Also tunes random 

wires and coax fed antennas. 

MFJ's fully balanced extremely 

wide-range T-network gives you 

simple, fast three knob tuning. No 

complicated switching between 

high and low impedance and 

switching in additional capacitance 

of L-networks. 

Four separate 500 pF in two 

gangs gives you a total of 2000 pF for highly 

efficient low loss operation on 160 Meters. 

You get excellent 10 Meter performance 

because of MFJ's low minimum capacitance 

and exclusive Self-Resonance 

Killer high-Q AirCore TM roller inductor 

with silver plated contacts. 

Heavy duty 1:1 current balun gives you 

12 MFJ . . . the World Leader in Amateur Radio Accessories! 

Balanced Line = Extremely Low Loss 

Balanced lines give extremely low loss. 

Doublet, horizontal loop, vertical loop, 

quad, double extended Zepp, Lazy H, W8JK 

antennas all give efficient multi-band operation 

when fed with balanced lines. 

6-80 Meter Balanced Line Tuner 


$ 189 95 

Ship Code C 

MFJ-974B. Same 

as MFJ-974HB but 

for 6-80 Meter operation 

(no 160 Meters). 

Antenna Accessories 

MFJ-1777, $59.95. 102 feet all band 

doublet antenna covers 160-6 Meters with 

balanced line tuner. 

Super strong custom 

fiberglass center insulator 

provides stress relief for 

450 Ohm ladder line (100 

feet included). Authentic 

glazed ceramic end insulators. 

Handles 1500 Watts. 

MFJ-18H100, $34.95. 100 feet of 

quality 450 Ohm ladder line. 

MFJ-18G100, $24.95. 100 feet of 

extremely strong heavy duty 7-strand, 14gauge 

hard copper antenna wire. 

MFJ-16C06, $4.56. 6 authentic glazed 

ceramic end/center antenna insulators. 

Extra strong. Will not arc or melt. 

New! MFJ-16D01, $6.95. 

Super strong custom fiberglass 

stress relieving center insulator 

for 450 Ohm ladder line. 

See page 71-73 for more antenna accessories. 

MFJ 1500 Watt Fully Balanced Antenna Tuner 

Fully balanced MFJ-976 handles 1500 Watts legal limit . . . Extra-wide 12-2000 Ohms matching 

range . . . continuous 1.8 to 30 MHz coverage including all WARC bands . . . Four separate 500 pF 

in two gangs gives you a total of 2000 pF capacitance . . . Heavy duty 1:1 current balun . . . more! 

superb balance and stays cool even at 1.5kW. 

True active peak reading lighted Cross- 

Needle SWR/Wattmeter lets you read 

SWR, true peak or average forward and 

reflected power all at a glance on 300/ 

3000 Watt ranges. New! Super-bright LED 

meter light. Use 12 VDC or 110 VAC with 

MFJ-1312D, $15.95. 12Wx6Hx15 3 /4D in. 

An inside view of the MFJ-976

MFJ Small, high efficiency Loop Tuners TM 

Turns any wire loop into small, high efficiency multi-band transmitting loop antenna 

Wire Loops and Mounts 

Mount for 

PVC Cross Loop 


$ 95 259 

Ship Code C 


$ 189 95 

Ship 

Code B 


$ 209 95 

Ship 

Code B 

Drape a wire around a 

bookcase or window and 

attach both ends to this new 

MFJ Small Loop Tuner TM . 

It instantly turns into a small, high efficiency 

multi-band transmitting loop antenna! 

You can operate 5.3 to 30 MHz with a 

full 150 Watts. No ground, radials or counterpoises 

needed. 

The excellent performance of a highefficiency 

small loop antenna is legendary 

and well proven by users all over the world. 

RF Bypass Switches 


$ 95 19 

Ship Code A 

Connect your antenna and transceiver to 

this MFJ RF Bypass Switch and you can 

switch in or bypass your antenna tuner, linear 

amplifier, preamp, wattmeter or other 

device -- switch in and bypass any coax fed 

device with PL-259 UHF connectors. DC 

to 60 MHz. SO-239 connectors. 50-75 

Ohms. 3Wx1 1 /2Hx2 1 /2D inches. 

MFJ-1705, $19.95. 300 Watts. 

MFJ-1705H, $29.95. 1500 Watts. 

Mobile AntennaMatcher 


$ 95 29 

Ship Code A 


$ 95 29 

Ship Code A 

Matches HF 

mobile antennas 

10 through 80 

Meters. Select 

five values of 

capacitance 120-470 pF to add at antenna 

feed point to ground to form L-network 

with antenna. Gives you more power out. 

Handles 300 Watts. SO-239 connectors. 

Tiny 3 1 /2Wx3Hx1 1 /4D inches. 

You’ll radiate a low angle DX signal that 

literally rivals full size dipoles and work 

incredible DX! 

It’s a very quiet receiving antenna -you’ll 

hardly notice static crashes. Its high- 

Q reduces QRM, overloading, harmonics. 

It’s perfect for apartments, antenna 

restricted areas and portable operation -- it 

really gets out! 

A 13 foot wire formed into a loop operates 

30-20 Meters (4 foot for 17-10 M; 7 

foot for 20-15 M; 28 foot for 60-40 M). 

You can tune any shape loop -- circle, 

square, rectangle, any odd shape. A quarter 

wavelength wire shaped as a circle is the 

most efficient. 

A given wire length covers about 1.5 to 

1 frequency range (i.e. 7-10/18-28 MHz, 

etc.). Exact frequency coverage depends 

on wire length, loop shape, surroundings 

and height above ground. 

Has MFJ low loss Butterfly loop tuning 

capacitor, no rotating contacts. Easy-Carry 

handle. Mount for PVC Cross on cover. 

See June, 1986, QST or recent ARRL 

Antenna Handbook for more details on 

small, high efficiency loops. 

MFJ-936B, $259.95. For home/portable 

stations. Has relative RF antenna current 

meter with sensitivity control and 30/300 

Watts Cross-Needle SWR/Wattmeter. 

9 1 /4Wx5 1 /2Hx9 1 /2D inches. 

MFJ-935B, $209.95. For portable/home 

stations. Smaller, lighter. Relative RF current 

meter with sensitivity control. 


MFJ-933, $189.95. Same as MFJ-935B 

less RF current meter. 6¼Wx5 1 /2Hx9½D in. 

Variable RF Transformer 


$ 95 64 

Ship Code A 

Multi-tap 

Variable RF 

Transformer 

matches low 

impedance 

(2-50 Ohms) of mobile antennas (ham 

sticks, screwdrivers, etc.) to 50 Ohm transceiver. 

11 impedance ratios. Use in reverse 

to transform high impedances to 50 Ohms. 

Handles 1000 Watts. 1.8 to 30 MHz. SO- 

239 connectors. 

Mobile Antenna C-Matcher 


$ 95 44 

Ship Code A 

Matches HF 


(ham sticks, 

screwdrivers, 

etc.) 10-80 

Meters by adding C (capacitance) at the 

antenna feedpoint to ground to form L-network 

with antenna. 11 values of switchable 

capacitance 30 pF-2000 pF. 600 Watts. 

SO-239 connectors. 3 1 /2Wx3Hx1 1 /4D inches. 

MFJ-57B, $29.95. 

Has PVC Cross for mounting loop on 

cover, 20-15M insulated 10-gauge flexible 

loop, low resistance lugs. 


Has MFJ-57B above, plus 60-40 M, 20- 

15 M, 17-10 M loops; wire clips. 

www.mfjenterprises.com • Toll-free 1-800-647-1800 13 

C 

MFJ Butterfly loop 

Tuning Capacitors 

The heart of the MFJ Loop Tuners is an 

extremely low loss butterfly tuning capacitor 

with no rotating contacts. 

Each handles 1500 Volts 

RMS and has a 

A. 

1 /4”diameter 

by 21 /2” long shaft. 

A. MFJ-19, $69.95. 

12 to 67 pF. 

6Dx3Wx3½H inches. 

B. MFJ-23, $89.95. 

18 to 136 pF. 

10Dx3Wx3½H in. 

B. 

Mobile Antenna L-Matcher 


$ 95 44 

Ship Code A 

Matches HF 


(ham sticks, screwdrivers, 

etc.) 10-80 

Meters by adding 

L (inductance) at 

the antenna feedpoint 

to ground to form L-network with 

antenna. 11 values of switchable inductance, 

.2 uH-12 uH. Handles 200 Watts. SO- 

239 connectors. 4Wx3 3 /4Hx1 3 /4D inches. 

AutoTuner Extender TM 


$ 79 95 

Ship Code A 

Does 

your 

rig’s 

auto- 

matic tuner have 

limited matching 

range? MFJ- 

914 transforms 

your antenna impedance by as much as 10 

times! Puts nearly any antenna into the 

range of your automatic or manual tuner. 

Covers 160-10 Meters, handles 300 Watts, 

has bypass position. Measures a compact 

6Wx4Hx2 1 /2D inches.

HF/VHF/UHF SWR Analyzers for all Your Building Needs 

MFJ-229 Reads SWR of Any Antenna from 270-480 MHz 


$ 209 95 

Ship Code A 

Just 

plug in 

your 

antenna 

coax, set the frequency 

and read SWR! 

Easy-to-read LCD 

displays frequency and 

SWR and has a logarithmic 

SWR bargraph 

for precision tuning. 

Two line high-contrast 

LCD has 32 huge 1/4 

inch characters. 

Select any desired frequency range for 

tuning. Examples: Tune from 280 to 295 

MFJ-219B Econo MFJ-229 


$ 119 95 

Ship Code A 

MFJ Antenna Bridge 

New & Improved! 

Now has AGC for 

constant readings. 

No other equipment 

needed. Take it to your antenna 

site. Determine if your antenna is 

too long or too short, measure its 

resonant frequency, and its resistance 

to 500 ohms. It’s the easiest, 

most convenient way to 

determine antenna parameters. 

Resistance bridge, null meter, 

tunable oscillator-driver (1.8 to 

30MHz). 9 VDC or 110 VAC with MFJ- 

1312D, $15.95. 71 /2Hx21 /2Wx21 MFJ-204B 

$ 95 99 

Ship Code A 

/4D inches. 

Back in the vacuum tube days they 

called these babies grid dip meters and 

every ham and experimenter either had one 

or wanted one. The MFJ- 

201 solid state (hence no 

“grid”) is 

smaller, 

lighter, and 

vastly more 

versatile 

than its 

ancestor. 

Use it as a 

traditional 

dip meter to 

find a coil’s 

MHz, 320 to 350 MHz or 400 to 450 MHz. 

Tuning knob has a built-in 10:1 vernier 

reduction drive for precision tuning. 

You can use the MFJ-229 to adjust 

dipoles, verticals, yagis, quads and other 

antennas and determine their SWR, resonant 

frequency, and bandwidth. 

Test and tune stubs and coax lines. You 

can determine velocity factor, impedances 

and estimate losses of transmission lines. 

Adjust and test RF matching networks 

and RF amplifiers without applying power. 

Use as signal source for testing and 

alignment. Requires 15VDC or 110 VAC 

with optional MFJ-1318, $15.95, wall 

adapter. Measures 3 3 /4Wx6 1 /2Hx1 3 /4D”. 

MFJ VHF SWR Analyzer TM 

VHF SWR 

Analyzer TM finds 

the SWR on a calibrated 

dial of any 

antenna from 138-156 MHz -a 

must-have for any VHF 

antenna builder! 

Has jack for external frequency 

counter -- helps in testing 

your VHF handhelds and 

other gear. 

Measures 

7 1 /2Hx2 1 /2Wx2 1 /4D inches -- super compact 

so you can carry it to your antenna source. 

Use 9 Volt battery or 110 VAC with 

optional MFJ-1312D, $15.95 wall adapter. 

MFJ RX Noise Bridge 

Quickly adjust 

almost any antenna 

for maximum 

performance, 1 to 

100 MHz. 

Lengthen or 

shorten your antenna for minimum 

SWR. Measure resonant 

frequency, feedpoint resistance 

and reactance. 

Works with any receiver or transceiver. 

Hand-calibrated resistance scale, 

expanded capacitance range and exclusive 

built-in range extender. 4 1 /4Wx2Hx4D in. 

Use 9 Volt battery (not included). 

Economical Dip Meter covers 1.5-250 MHz 


$ 149 95 

Ship Code A 

Similar to 

MFJ-229, less 

LCD display. 

The MFJ-219B 

Antenna SWR Analyzer covers 

420 to 450 MHz. Has meter for 

SWR and jack for external frequency 

counter. Measures 

2 1 /2Wx7 1 /2 Hx 2 1 /4D inches. 

MFJ-229 and MFJ-219 have 

“N” connector with free N-to-SO-239 UHF 

adapter. Also they have Battery Check and 

Power Saving feature. For 50 Ohm antenna 

systems. Use 9-Volt battery or 110 VAC 

with MFJ-1312D, $15.95. 10 AA batteries 

for MFJ-229 or 110 VAC adapter. 


$ 95 99 

Ship Code A 


$ 95 79 

Ship Code A 

resonant frequency. 

Couple it to an antenna, or to coax lines 

to get their electrical length. 

Or use it as an absorption wavemeter for 

measuring transmitter output, neutralizing 

tank circuits, or a field strength meter. 

Other traditional dip uses include: 

crystal oscillator, monitoring audio signal 

output (it includes a headphone jack), and 

measuring inductance and capacitance. 

This solid-state grid dip meter covers 

1.5-250 MHz in 6 bands, has thumb wheel 

tuning, color code readout, 6 coils, earphone 

jack and battery check. Uses a 9V 

battery for operation. Measures a compact 

2Wx2 1 /2Dx7H” including coils. 

14 www.mfjenterprises.com • Toll-free 1-800-647-1800 

Basic HF/VHF SWR Analyzer TM 

MFJ Starter 

SWR AnalyzerTM lets you read SWR 

from 1.8 to 170 MHz 

quickly only on a 

single analog meter. 

Tune knob, frequency 

control switch. 

No LCD module, 

counter or charging 

circuit. Use 8 AA 

cells or 110 VAC with MFJ-1312D, $15.95. 

Compact, handheld size: 4x21 /2x63 MFJ-209 

$ 95 159 

Ship Code A 

/4 inches. 

HF 10-160M SWR Analyzer TM 


$ 95 99 

Ship Code A 

Custom 24-350 MHz Analyzers 

$ 95 279 For commercial 

Ship Code A applications. Select 

a specific frequency 

range and MFJ will customize 

an analyzer for you. Choose the 

model below for your needs. 

Specify frequency range and 

allow 4 weeks for these models. 

Foam-Padded carrying case 

Great for 

portable, 

dxpeditions, 

traveling, 

hotels, etc. Heavyduty 

case takes a 

beating but 

keeps electronics 

safe 

with its univer- 

This compact 

MFJ HF SWR 

Analyzer will help 

you build the antennas you need 

for DX work. 

Just plug in the coax to 

measure the SWR of any HF 

antenna, 160 to 10 Meters. Has 

jack for external frequency 

counter. 9VDC of 110 VAC 

with MFJ-1312D, $15.95. 

Plug in coax to find the SWR of any 

HF antenna on any band 10-160 Meters. 

Jack for external frequency counter. 9 

V battery or 110 VAC with MFJ-1312D, 

$14.95. Measures 7 1 /2Hx2 1 /2Wx2 1 /4D in. 

MFJ-220A, 24-49 MHz 

MFJ-220B, 34-69 MHz 

MFJ-220C, 45-91 MHz 

MFJ-220D, 67-135 MHz 

MFJ-220E, 90-176 MHz 

MFJ-220F, 190-350 MHz 

MFJ-220G, 140-260 MHz 


$ 39 95 

Ship Code C 

sal foam insert. Pre-separated tear-away 

cubes let you shape the foam to custom fit 

your gear. Eggshell type padding on topside. 

Handle, carrying strap, two key sets, 

left/right snaps. 10 3 /4Dx16Wx4H in. MFJ- 

6404F, $12.95. Extra foam insert for MFJ- 

6404. Accessories in picture not included.

MFJ 1.8-170 MHz SWR Analyzer TM 

Reads complex impedance . . . Super easy-to-use 

MFJ-259B reads SWR . . . Complex RF Impedance: Resistance (R) and Reactance (X) or Magnitude 

(Z) and Phase (degrees) . . . Coax cable loss (dB) . . . Coax cable length and Distance to fault ...Return 

Loss . . . Reflection Coefficient . . . Inductance . . . Capacitance . . . Battery Voltage. LCD digital readout 

. . . covers 1.8-170 MHz . . . frequency counter . . . side-by-side meters . . . Ni-Cad/Ni-MH charger 

circuit . . . battery saver . . . low battery warning . . . smooth reduction drive tuning . . . much more . . . 

The world’s most popular SWR analyzer 

just got incredibly better and gives you 

more value than ever! 

MFJ-259B gives you a complete picture 

of your antenna’s performance. You can 

read antenna SWR and Complex Impedance 

1.8 to 170 MHz. 

Read Complex Impedance as series 

resistance and reactance (R+jX) or as magnitude 

(Z) and phase (degrees). 

You can determine velocity factor, coax 

cable loss in dB, length of coax and distance 

to a short or open in feet. 

You can read SWR, return loss and 

reflection coefficient at any frequency 

simultaneously at a single glance. 

Also read inductance in uH and cap-acitance 

in pF at RF frequencies. 

Large easy-to-read two line LCD screen 

and side-by-side meters clearly display your 

information. 

Analyzer Current Balun 

This new 1:1 

Current balun 

lets you use 

your MFJ SWR 


$ 29 95 

Ship Code A 

and Antenna Analyzers on 

balanced line antennas and 

other loads. Covers 1.8-30 

MHz. 2Wx3 3 /4Hx1 1 /2D in. 

SO-239 for analyzer input. 

MFJ-7702, $3.95. PL-259 

to PL-259 barrel connector. 


$ 289 95 

Ship Code B 

Built-in frequency 

counter, Ni-Cad charger 

circuit, battery 

saver, low battery 

warning and smooth reduction drive tuning, 

much more! 

Super easy to use! Just set the 

bandswitch and tune the dial -- just like 

your transceiver. SWR and Complex 

Impedance are displayed instantly! 

Here’s what you can do 

Find your antenna’s true resonant frequency. 

Trim dipoles and verticals. 

Adjust your Yagi, quad, loop and other 

antennas, change antenna spacing and height 

and watch SWR, resistance and reactance 

change instantly. You’ll know exactly what 

to do by simply watching the display. 

Perfectly tune critical HF mobile antennas 

in seconds for super DX -- without subjecting 

your transceiver to high SWR. 

Measure your antenna’s 2:1 SWR bandwidth 

on one band, or analyze multiband 

performance from 1.8 to 170 MHz! 

Check SWR outside the ham bands without 

violating FCC rules. 

Take the guesswork out of building and 

adjusting matching networks and baluns. 

Measure distance in feet to a short or 

open in faulty coax. Measure length of a roll 

of coax, coax loss, velocity factor, impedance. 

Measure inductance and capacitance. 

Measure resonant frequency and approximate 

Q of traps, stubs, transmission lines, 

RF chokes, tuned circuits and baluns. 

Adjust your antenna tuner for a perfect 

1:1 match without creating QRM. 

And this is only the beginning! The 

MFJ-259B is a complete ham radio test station 

including -- frequency counter, RF signal 

generator, SWR Analyzer TM , RF Resistance 

and Reactance Analyzer, Coax Analyzer, 

Capacitance/ Inductance Meter and more! 

Take it anywhere 

Fully portable, take it anywhere -- remote 

sites, up towers, on DX-peditions. Use 

10 AA or Ni-Cad or Ni-MH batteries (not 

included) or 110 VAC with MFJ-1312D, 

$15.95. Rugged metal cabinet only 4x2x6 3 /4”. 

How good 

is the MFJ-259B? 

MFJ SWR Analyzers TM work so good, many 

Tunable Analyzer Filter 


$ 99 95 

Ship Code A 

Exclusive MFJ 

tunable RF filter 

allows accurate 

MFJ SWR and 

impedance measurements 

between 1.8-30 MHz in presence 

of strong RF fields. Has 

virtually no effect on measurements by the 

analyzer. Works with all SWR Analyzers. 

antenna manufacturers use them in their lab 

and on the production line -- saving thousands 

of dollars in instrumentation costs! Used 

worldwide by professionals everywhere. 

SWR Analyzer Accessories 

MFJ-29C, $24.95. Tote your 

MFJ-259B anywhere with this 

genuine MFJ custom carrying case. 

Has back pocket with security cover 

for carrying dip coils, adaptors 

and accessories. Made of special 

foam-filled fabric, it cushions 

blows, deflects scrapes, and protects 

knobs, meters and displays 

from harm. Clear protective window for 

display and cutouts for knobs and connectors. 

Authentic MFJ logo! 

MFJ-99, $60.85. Carrying pouch, dip coil 

adapters and power supply. 

MFJ-99B, $93.80. Deluxe Accessory 

Pack has 10 Ni-MH batteries, power supply, 

pouch and dip coils. Save $7! 

MFJ-92AA10, $29.95. 10-pack MFJ 

NiMH AA rechargeable batteries. 

MFJ-5510, $9.95. 12 VDC cigarette 

lighter adapter lets you use your 

MFJ SWR Analyzer on-the-road to 

make quick adjustments to your HF/ 

VHF/UHF mobile antennas! 18” retracted 

curly cord, 60 inches fully stretched. 

Easily fits in glove compartment. 

Adapters for your MFJ-259B 

MFJ-7737, $5.95. PL-259 to BNC 

Female Adapter. 

MFJ-7727, $5.95. PL-259 to 

SMA Female Adapter. 

MFJ-249B SWR AnalyzerTM Save a few bucks! 

MFJ- MFJ-249B 

249B is $ 95 

similar to 269 

Ship Code A 

the MFJ- 

259B, but less analog 

meters. MFJ-249B reads 

SWR, true impedance 

magnitude and frequency 

only on LCD module. 

Has nicd/nimh 

charging circuit, can use 

MFJ-259B accessories. 

MFJ-66, $24.95. Plug 

these MFJ dip meter 

coupling coils into an 

MFJ SWR AnalyzerTM and turn it into a sensitive 

and accurate band 

switched dip meter. Set 

of two coils cover 1.8-170 

MHz depending on SWR AnalyzerTM MFJ Analyzer Dip Coils 


$ 95 24 

Ship Code A 

. 


MFJ HF/VHF/UHF Antenna Analyzer 

1.5-185* MHz plus 300-490MHz 

All the RF-diagnostic functions you need with easy-to-use MFJ-266 digital analyzer! 

The MFJ-266 covers HF, VHF, plus UHF amateur and commercial frequencies with digital precision. It 

also displays SWR, Complex Impedance, and Impedance magnitude simultaneously -- all on the same 

easy-to-read LCD screen. Use it to measure Capacitance, Inductance, Field Strength, Frequency, plus 

generate test signals. You can also fine tune stubs, analyze coax, test baluns and RF transformers, and 

perform many other important RF-related tasks around the shack or on the road! 

When it comes to simplicity and convenience, 

MFJ-266 is a clear winner. Not only 

is it easy-to-use, but fits comfortably in one 

hand for on-the-fly measurements on the 

bench or in the field. Here's the rundown of 

what this compact powerhouse can deliver: 

Frequency Coverage 

The MFJ-266 covers all bases -- from 160 

Meters through 6 Meters, the FM broadcast 

band, Airband, 2 Meters, 70 cm, plus 

VHF/UHF commercial 2-way frequencies: 

Band A: 1.5 to 2.7 MHz 

Band B: 2.5 to 4.8 MHz 

Band C: 4.6 to 9.6 MHz 

Band D: 8.5 to 18.7 MHz 

Band E: 17.3 to 39 MHz 

Band F: 33.7 to 65 MHz (gap*) 

Band V: 85 to 185 MHz 

Band U: 300-490 MHz 

The velvet-smooth 10:1 vernier drive and 

solid state varicap makes fine tuning a breeze, 

Built-in dial lock prevents accidental detuning 

making measurements. Switched backlighting 

LCD screen is easy-to-read in any light. 

SWR, Impedance Magnitude, 

and Complex Impedance 

In SWR Mode, the MFJ-266 reads SWR 

1:1 to 9.9:1, Impedance Magnitude 10-500 

Ohms and Complex Impedance (resistance 

and reactance). Best of all, it displays all three 

parameters simultaneously and operating frequency 

with one quick glance. No other lowcost 

handheld analyzer offers this! (Note: Zmag 

and R+jX not displayed on UHF). 

Capacitance and Inductance 

Find values for unknown capacitance in 

pF or unknown inductance in uH quickly. 

Measurements are made at RF frequencies 

rather than at the low audio frequencies used 

by many handheld L/C meters. 

Frequency Measurement, Field 

Strength Readings 

In Frequency-Counter Mode, MFJ-266 

becomes an accurate 500-MHz counter with 

a choice of 1-kHz or 100-Hz resolution. The 

counter mode also features a high-resolution 

digital field-strength meter for measuring the 

relative intensity of incoming signals. 

Together, these functions are extremely useful 

for checking the operation of oscillators, 

transmitters, as well as assessing the 

strength of radiated signals MFJ-266 

from antenna arrays. $ 95 349 Built-in Interference Ship Code B 

Detection 

In Frequency-Counter Mode, the MFJ- 

266 tracks down powerful local signals that 

can disrupt accurate SWR measurements. 

When picked up by an antenna under test, 

these sig-nals may compete with MFJ-266's 

internally generated test signal to make 

SWR readings appear artificially high. 

Handheld antenna bridges are subject to 

additive interference, but only MFJ can 

detect the presence of an offending signal, 

display its severity, and identify the operating 

frequency! 

Powerful Signal Source 

The MFJ-266 also functions as a tunable 

signal source, supplying about 2 Volts peakto-peak 

across the entire tuning range. You 

can use this signal to drive mixers, lowpower 

amplifier stages, or filters, and use it 

as a source for checking antenna patterns on 

a range. Add a step attenuator, (MFJ-762, 

$89.95) and it becomes a low-level signal 

source for testing receivers and pre-amps. 

Take it With You! 

You'll especially appreciate the compact 

size and bantam weight of the MFJ-266 when 

up on a roof or perched on a tower. Also, 

push-button band switching lets you toggle 

across the spectrum with ease when tucked 

into cramped spaces. 

User-Friendly Layout 

MFJ-266 is ergonomic, antenna N-connector 

positioned on top of the case and 

everything else arranged and clearly marked 

on front panel -- right in front of your eyes. 

MFJ-266’s operating manual was professionally 

written and illustrated to help you 

understand and master every function quickly. 

It also includes a guide for ensuring accurate 

results and getting the most from the 

unit's advanced features. In the back, you'll 

find a one-page "Quick Guide" that reviews 

all controls and functions. 

Many Instruments in One 

Having the MFJ-266 is like owning several 

pieces of test equipment. You get a powerful 

wide-range signal source, Inductance/ 

Capacitance meter, network analyzer, RF 

field-strength meter and a 500-MHz fre- 


$ 95 149 New! 

Ship Code A 

reference signal. Signals used for 

MFJ-222 uses measurement can come from an antenna 

low power, high- analyzer such as MFJ-269 or any other genspeed 

dual comerator that will supply at least 1 Volt peak 

parator circuit to output into the load. It has a built-in switch- 

allow precision able 50 Ohm load (250 mW max) so the use 

phase measure- of an external load and BNC TEE is not 

ments 1-50 MHz. needed in most tests. MFJ-222 will read the 

A circuit indicates frequency of the signal so generators with 

if unknown phase only a coarse or no frequency readout can 

lags or leads the even be used. Set-up is simple. Plug in the 

signal generator output to IN, connect the 


quency counter all-in-one small package. 

Bullet Proof Construction 

Features like the rugged aluminum case, 

solid-state band switching, robust internal 

construction, and solid-state LCD display 

ensure that minor bumps and drops won't 

faze your unit in the least. In fact, you can 

expect it to hold calibration and deliver reliable 

service for years to come. 

Vital Statistics 

Uses eight internal AA alkaline batteries or 

optional 12VDC/110 VAC adapter with 


Has built-in Li-ion battery charger. 

Use optional MFJ-18650, $8.95. 

Powerful 3.7V, 3000 mAh Li-on battery. 

Compact 3 3 /4Wx6 1 /2Hx2 3 /4D inches. 

Weighs 1.32 lbs. Draws 30-mA in 

counter and 140-mA in analyzer modes. 

Includes N-to-SO-239 adaptor. 

Protected by MFJ’s famous one year 

NoMatterWhat TM limited warranty. 

MFJ Precision Antenna Phase Meter 

Reference OUT to the input of the network 

and the output of the network to 

UNKNOWN IN. Turn it on and read the 

phase shift and the frequency. A bright two 

line LCD display allows precision readout 

of the phase from -180 to +180 degrees 

without interpreting an analog meter or 

guessing at the phase polarity. With low 

power components, it will operate many 

hours on a single 9V battery or with optional 

AC adapter MFJ-1312D, $15.95. 

Compact 4¼Wx4¾Hx2D inches.

1.8-170 MHz plus 415-470 MHz 

HF/VHF/UHF SWR Analyzer 

Covers 1.8-170 MHz and 415-470 MHz . . . SWR . . . Complex RF Impedance: Resistance(R) and 

Reactance(X) or Magnitude(Z) and Phase(degrees) . . . Coax cable loss(dB) . . . Coax cable length 

and Distance to fault . . . Return Loss . . . Reflection Coefficient . . . Inductance . . . Capacitance . . . 

Battery Voltage. LCD digital readout . . . frequency counter . . . side-by-side meters . . . Ni-MH/Ni- 

Cad charger circuit . . . battery saver . . . low battery warning . . . smooth reduction drive . . . 

MFJ-269 covers 1.8 to 

170 MHz and 415 to 470 

MHz -- an MFJ-269 exclusive! 

It includes all the fea- 

tures of the MFJ-259B, the world’s most 

popular SWR Analyzer plus much more! 

Large easy-to-read two line LCD display 

and side-by-side meters clearly display your 

information. Built-in Ni-Cad/Ni-MH charger 

circuit, battery saver, low battery warning, 

smooth reduction drive tuning. Use as signal 

source for testing/alignment. 

Built-in CoaxCalculator TM -- calculates 

coax line length in feet given coax length in 

electrical degrees and vice versa for any frequency 

and any velocity factor (great for 

building matching sections and phasing 

lines) -- an MFJ-269 exclusive! 

New 12-bit A/D converter gives much 

better accuracy and resolution than common 

8-bit A/D converters -- an MFJ-269 exclusive! 

Super easy to use! Just set the bandswitch 

and tune the dial -- just like your transceiver. 

1.8 to 170 MHz Range Features 

MFJ-269 gives you a complete picture of 

your antenna. Read antenna SWR and 

Complex Imped-ance 1.8 to 170 MHz. 

Built-in frequency counter. 

Read Complex Impedance as series 

equivalent resistance and reactance (Rs+jXs) 

or as magnitude (Z) and phase (degrees). 

Also reads parallel equivalent resistance and 

reactance (Rp+jXp) -- an MFJ-269 exclusive! 

Determine velocity factor, coax loss in dB, 

length of coax and distance to short/open in feet. 

You can read SWR, return loss and 

reflection coefficient at any frequency 

simultaneously at a single glance. Also 

reads match efficiency. 

Also read inductance in uH and capacitance 

in pF at RF frequencies. 

You can measure SWR and loss of coax 

with any characteristic impedance from 10 

to over 600 Ohms, including 50, 51, 52, 53, 

73, 75, 93, 95, 300, 450 Ohms -- an MFJ- 

269 exclusive! More info see page 11. 

415 to 470 MHz Range features 

Just plug in your UHF antenna coax, set 

the frequency and read SWR, return loss and 

reflection coefficient simultaneously. You can 

read coax cable loss in dB and match efficiency. 

MFJ-92AA01, $3.49 each. 

MFJ’s super high capacity 

Ni-MH “AA” batteries have 

twice the power of standard 

Nicads at about the same price! 


$ 389 95 

Ship Code B 

MFJ batteries have no detrimental memory 

effect that are the trademark of Ni-Cad 

batteries so you can use them to their full 

potential. MFJ-92AA10, $29.95. 

10-Pack of MFJ SuperCells TM , perfect for 

your MFJ SWR Analyzer! 

You can adjust UHF dipoles, verticals, 

yagis, quads and other antennas and determine 

their SWR, resonant frequency and bandwidth. 

You can test and tune stubs and coax 

lines. You can manually determine velocity 

factor and impedances of transmission lines. 

Adjust and test RF matching networks 

and RF amplifiers without applying power. 

Has easy-to-read LCD logarithmic SWR 

bargraph and SWR meter for quick tuning. 

Take it anywhere 

Fully portable, take it anywhere -- on 

remote sites, up towers, on DX-peditions. 

Has built-in “N-type” connector. 

Includes Free N-to-SO-239 adaptor. 

Use 10 AA Ni-MH or Ni-Cad or alkaline 

batteries (not included -- alkalines cannot be 

charged internally) or 110VAC with MFJ- 

1312D, $15.95. 

Compact 4Wx2Dx6 3 /4H inches. 

MFJ-269 SWR Analyzer Accessories 

MFJ-39C, $24.95. Tote 

your MFJ-269 anywhere with 

this genuine MFJ custom carrying 

case. Back pocket with 

security cover for carrying 

dip coils, adaptors and accessories. 

A special foam-filled 

fabric cushions blows, deflects 

scrapes, and protects knobs, 

meters and displays from harm. Wear it 

around your waist, over your shoulder, or 

clip it onto the tower while you work -- the 

fully-adjustable webbed-fabric carrying 

strap has snap hooks on both ends. Has clear 

protective window for frequency display and 

cutouts for knobs/connectors-- use your MFJ 

Analyzer TM without taking it out of the case. 

MFJ-269 SWR Analyzer Accessories 

MFJ-99C, $45.90. SWR Analyzer Power 

Pack. 10-Pack SuperCell TM Ni-MH batteries, 

& MFJ-1312D Power supply for MFJ- 

259B/MFJ-269 analyzers. 

MFJ-98, $60.85. MFJ-269 Accessory 

Pack. Same as MFJ-99C but has MFJ-39 

custom Carrying Pouch for MFJ-269. With 

MFJ-1312D power cube, MFJ-66 dip coils. 

MFJ-98B, $93.80. Complete accessory 

pack! Pouch, batteries, dip coils, power cube. 

MFJ-92AA10, $29.95. MFJ 10-Pack AA 

SuperCell TM Rechargeable Ni-MH Batteries. 

MFJ-66, $24.95. Dip coil set covers 1.8- 

170 MHz. Turns MFJ-269 into a dip meter. 

MFJ-5510C, $9.95. 12 VDC 

Cigar-ette lighter adapter cord for 

using your MFJ SWR Analyzers onthe-road. 

18” retracted curly cord, 60” 

fully stretched. 

MFJ-269 Adaptors for HT Antennas 

MFJ-7730, $5.95. (Left). N-Male to 

SMA Female Adapter. 

MFJ-7731, $5.95. (Right). N-Male 

to BNC Female Adapter. 

Super High Capacity 2500 mAh Ni-MH AA Batteries MFJ POWERHaus TM Ultra-fast Intelligent Charger 

MFJ-92AA01 

$ 3 49 each 

Ship Code A 

MFJ-269PRO TM Analyzer 

MFJ-269Pro, $419.95. Like 

MFJ-269, but has its UHF range 

coverage 430 to 520 MHz and an 

extended commercial-style cabinet 

for lab work (helps protect knobs 

and connectors from damage. 

Charges AA-AAA-C-D and 9V 

Ni-MH or Ni-Cd Battery types. 

Active intelligent IC detects positive/negative, 

and monitors the voltage 

level during charging process. 

Two separate sets of charging compartments 

optimize energy efficiency. Auto switches to 

trickle when full charge is completed. 


$ 29 95 

Ship Code B 

MFJ-633 has charging status LEDs, removable dust cover and 

12V, 500 mA AC adapter is included. Quick charges 2-4 AA Ni- 

MH cells in an hour or less! 


MFJ Frequency Counters Cover 1 MHz to 3 GHz or 10 Hz to 3 GHz 


$ 129 95 

Ship Code A 

MFJ-886 Frequency Counter covers 1 MHz to 

3 GHz. It features 300 MHz direct count with 

0.1 Hz-per-second resolution. 

Incredible deal also includes Ni-Cd battery 

pack, charger and telescopic whip! 

10-digit high-contrast LCD display is easy-to-read. Huge 

3 /4 inch digits are highly visible. Hold switch locks display. 

Synchronous detector gives ultra-sensitive RF Signal Strength 

LCD bargraph. Four selectable gate times gives .1 Hz to 10 

Hz resolution in 300 MHz range and 10 Hz to 1000 

Hz resolution in 3 GHz range. 

Rechargeable Ni-Cd battery pack (included) 

gives up to 6 hours of use. Low battery LED indicator. 

Rugged aluminum cabinet 

(2 3 /4Wx3 1 /4Hx1 1 /4D inches) fits in shirt pocket and 

has black anodized finish. Order MFJ-886 for 110 

VAC, order MFJ-886 “X” for 240 VAC. 

Pocket-size Function Generator 


$ 99 95 

Ship Code A 

This unique 

unit is the only 

compact, battery-operated 

function generator 

designed for travel or 

bench use. Based on an 

XR-2206 integrated circuit, 

it provides square, triangular, 

and sine waves continuously 

from 1 Hz to well over 150 KHz in 

3 ranges. 4Hx3Wx1D inches. Frequency 

range switch, external power jack, 5-way 

binding posts. Use 9V battery. 

81 dB Step Attenuator 

This 

will be 

your 

most 

useful 


$ 89 95 

Ship Code A 

ham 

shack accessory! 50 ohms. 

Usable to 500 MHz. 250 

milliwatt maximum input. 

BNC connectors. Shielded 

stages. Connect between receiver and antenna 

and use an S-meter as a precision calibrated 

field strength meter. 

Prevent receiver blocking, cross-modulation. 

Determine gain and loss. Ideal for fox 

hunting. Evaluate linearity. 

Measure input and output level differences. 

Isolate circuits. 

Extend the range of your sensitive equipment. 



$ 69 95 

Ship Code A 

This lets 

you safely tune 

up your kilowatt 

linear 

amplifier at full peak 

power for best linearity. 

Keeps average power to a 

low, safe level to prevent 

overheating power supply stress. 

Relieves temperature related stress on 

amplifiers, tuners, and dummy loads too. 

It also can be used as a valuable diagnostic 

tool for tests of QSK systems, 

wattmeters, and more. Plugs into rig’s CW 

key jack (for convenience you can use a 

“Y” connector). 

Simply press the Pulse Tune button and 

Professional Function Generator 


$ 149 95 

Ship Code A 


$ 199 95 

Ship Code A 

Gives precision sine, square 

and triangular wave forms from 1 Hz to 1 

MHz in 6 decade ranges. Amplitude 

adjustable 0-12 volts peak-to-peak. DC offset 

is adjustable -6 to +6 VDC. Output is 

short circuit protected with output impedance 

of 400 Ohms. Sturdy black all metal 

cabinet. 110 VAC. 

Safely tune your amp with this MFJ AmplifierSaver TM Interface 

MFJ-888 covers 10 Hz to 3 GHZ with a 10digit 

LCD and an ultra-sensitive synchronous 

detector with 16-section bargraph to show RF 

signal strength. 

It features a Hi-Z low range, auto-hold, measures frequency 

and period, has LED backlight, beeper, low power consumption, 

hold switch to lock display, low battery 

indicator and more. A high-speed 300 MHz direct 

counter with 0.1 Hz resolution has four selectable 

gate speeds. 

Built-in Ni-Cd battery pack will operate up to 6 

hours and recharges with the external charger. 

MFJ-888 (2 3 /4Wx4 1 /4Hx1 1 /4D”) is complete with Ni- 

Cd battery pack, charger, and telescopic whip. 

Housed in a handsome stamped aluminum cabinet 

with black anodized finish. Order MFJ-888 for 

110 VAC, order MFJ-888 “X” for 240 VAC. 

Portable Signal Tracer-Injector 

Multi-purpose 

Portable Signal 

Tracer-Injector 



$ 99 95 

Ship Code A 

quickly finds defective stages 

in all kinds of signal amplifiers, 

radio receivers and transmitters. 

Includes home theaters, hi-fi 

amplifiers, public address systems, guitar 

amplifiers, AM/FM/ TV transceivers, phones, 

scanners, shortwave, etc. Use to find opens 

and shorts in cables and wires, identify and 

locate individual wires in multi-conductor 

cables. Has an AM detector and variable 

gain audio amplifier. 3Wx4Hx1D inches. 

Portable Variable Power Supply 

This MFJ MFJ-4105 

$ 95 

power supply 99 

is portable Ship Code A 

enough to fit in any toolbox 

3Wx4Hx1D”. It’s so 

light you can carry it anywhere. 

Provides fixed 5 VDC output along 

with a variable 1.5-12 VDC output. Total 

output is 500 mA. Output terminals and 

ground are convenient 5-way binding posts. 

Easy output voltage setting. Input 110 VAC. 

MFJ AC Line Monitor 

MFJ-850B, $24.95. Color 

coded scale lets you read voltage 

from 95-135 Volts. 2% Accuracy. 

Built-in AC socket, so you don’t 

lose the outlet. 21 /4Wx21 /4Hx11 /2D 

inches. It’s perfect for the ham 

shack and motorhomes! 

Tune-UpMatchmakerTM Adjust your 

antenna tuner for 

1:1 SWR without 

transmitting! 

Avoids overheating/arcing 

caused by high SWR 

and long tune-ups. 

Your MatchMakerTM inserts 

between transceiver and antenna tuner. 

Simply tune your transceiver to the desired 

frequency, then power-up the MatchMakerTM . 

Then adjust your tuner for a null in the 

pulsing “white noise” in your receiver. 

Automatic T/R switch bypasses MFJ- 

212 to prevent damage. Handles 300 Watts. 

Works with all radios, 160 through 6 

meters. Measures a compact 31 /3x11 tune your amplifier normally for maximum 

power output. Use 9V battery, not included. 

MFJ Deluxe AmplifierSaver 


$ 95 99 

Ship Code A 

/4x4 

inches. Use MFJ-1312D, $15.95. 

TM 

The MFJ-216 Deluxe AmplifierSaverTM includes front panel adjustments of pulse 

rate and duty cycle. 

Allows for easy performance testing of 

wattmeters, QSK systems and other electronic 

equipment. 

Measures 31 /2Wx11 2-Meter FM Signal Analyzer 


handheld Two 

Meter FM Signal 

Analyzer 


$ 95 79 

Ship Code A 

/2Hx4D inches. 

TM lets 

you measure signal strength 

with over 60 dB dynamic 

range and measure actual 

feedline loss in dB. Plug in 

any scope and your MFJ-224 

becomes a service monitor! 

Lets you visually analyze 

modulation wave forms, 

audio distortion, noise and 

instantaneous peak deviation. 

Tune in any signal between 143.5 - 

148.5 MHz. Built-in discriminator-meter 

function makes accurate tuning simple and 

easy. 4Wx21 /2Dx63 MFJ-224 

$ 95 179 

Ship Code A 

/4H”. Use 9V battery.

MFJ in-line Calibrated RF Ammeters 

. . . for tuning your antenna tuner/xmtr/amp for maximum radiated power … for determining antenna 

feedpoint impedance… for comparing antennas and tuners … for trouble shooting . . . checking for changes 


$ 119 95 

Ship Code A 


$ 79 95 

Ship Code A 

MFJ-834 Coax In-Line 

Calibrated RF Ammeter 

Connect the MFJ-834 Coax In- 

Line RF Ammeter between your antenna 

and tuner/ transmitter/amplifier and measure 

antenna feedline current in 3 calibrated 

ranges. 

Use it . . . for tuning your antenna tuner/ 

transmitter/amplifier for maximum radiated 

power … for determining antenna feedpoint 

impedance… for comparing antennas and 

tuners … for trouble shooting . . . and for 

checking for changes. 

Tuning for maximum feedline current 

for any given antenna always gives maximum 

radiated power! 

Any adjustment -- transceiver or amplifier 

tuning/loading controls, antenna tuner 

settings, whatever -- that increases feedline 

current improves power transfer and gives 

you a stronger radiated signal. 

Radiated power increases rapidly because 

power increases as the square of the current. 

Minimum SWR does not always mean 

maximum radiated power -- your tuner or 

lossy coax may be dissipating power -- and 

you may not get peak output power even if 

your tuner or amplifier is properly tuned. 

Use the MFJ-834 to determine best antenna 

tuner settings and to compare various tuners. 

Calculate your antenna feedpoint impedance 

by dividing your applied power by the 

square of the feedpoint current. 

Calibrated Clamp-On RF Ammeter 

Your antenna can change 

when you apply power -- insulators 

break down, traps heat up, 

capacitors leak -- and your feed- 

MFJ-854 Clamp-On RF Ammeter quickly snaps 

over wires and cables to measure RF currents 

flowing in antenna elements, radials, ground 

wires and on outside of coax. 

Tune counterpoises, radials and ground systems. 

Balance your radials. See how much signal 

is radiating from your antenna, feedline or 

ground wire. Study/optimize your antennas 

for peak performance. Find current peaks/ 

nulls on antennas/ feedlines. Plot current 

profile, measure and tweak current flow at 

each antenna element in phased arrays. 

Determine your antenna feedpoint 

impedance, radiated power, power losses and 

efficiency. Track down RFI-causing currents 

on coax shield, rotator cable, guy wires, house 

wiring, telephone and television cables. 

Has five calibrated ranges to 3 Amperes including 

sensitive 30 mA range with linearity compensation to 

assure accuracy at low currents. It's sensitive enough to use an 

MFJ SWR Analyzer as the source to drive your antennas. 

Less than 1 mA on super-sensitive Variable Range yields usable 

meter deflection for tracking RFI on household wiring and cables. 

1-30 MHz plus. ½ inch diameter cables. 2 ½ Wx5½Hx1½D in. 


$ 99 95 

Ship Code A 


$ 139 95 

Ship Code A 

point impedance may be drastically different 

from your SWR Analyzer measurements. 

MFJ RF ammeters are rugged, read accurately 

over 1-30MHz in three linear ranges 

(.3, 1, 3 Amps) and barely perturb the antenna. 

Large 3-inch lighted meter. Use 12 VDC 


SO-239 connectors. 6Wx3½Hx4½D inches. 

MFJ-834H. $89.95. Like MFJ-834, but 

3, 10, 30 Amps high current ranges. 

MFJ-836 all-in-one RF 

Ammeter/SWR/Wattmeter 

The MFJ-836, $139.95 is an all-in-one 

RF Ammeter/SWR/Wattmeter! You can 

quickly determine feedpoint impedance and 

monitor antenna system for detrimental 

changes under power. 

Read RF current in three calibrated 

ranges -- 1, 3, 10 Amperes. A large 3-inch 

lighted easy-to-read Cross-Needle meter lets 

you read SWR, forward (300/3000W) and 

reflected power (60/600W) simultaneously. 

MFJ's exclusive TrueActive TM circuit 

gives you true peak or average power readings. 

SO-239 connectors. Use 9 Volt battery 

and/or 12 VDC or 110 VAC with MFJ- 

1312D, $14.95. 6Wx3½Hx4½D inches. 

MFJ-836H, $149.95. Like MFJ-836 but 

Calibrated mini Clamp-On RF Ammeter 


$ 59 95 

Ship Code A 


calibrated 

mini Clamp- 

On RF ammeter 

accurately measures 

RF current in antenna 

elements, radials, 

ground wires, coax 

shield. Non-metallic 

lightweight case 

minimizes electric 

field disturbances for accurate 

MFJ Super-Sensitive RFI Sniffer 

MFJ-805 works 

with mobile installations, 

ferreting 

out alternator hash, 

ignition pulses and 

microprocessor 

noise on feedlines 

and power leads. 

Isolate cables picking 

up RFI and 

3, 10, 30 Amps high current ranges. 

MFJ-835 Balanced Line 

RF Ammeter 

How do you detect imbalance in openwire 

or ladder line? By measuring and 

comparing each feedline wire current -- your 

feedline is balanced if the currents are equal. 

The MFJ-835, $129.95 BalancedLine RF 

AmmeterTM is two identical calibrated RF 

ammeters using an MFJ Cross-Needle meter. 

Feedline currents are simultaneously displayed 

on separate calibrated scales in three 

ranges (.3, 1, 3 Amperes). 

Balance is clearly revealed on MFJ's 

exclusive BalancedBarTM -- when currents 

are balanced, the dual needles cross in the 

center -- no matter the actual current. 

If the needles cross within the vertical 

BalancedBarTM MFJ-835 

$ 95 129 

Ship Code A 

the balance is within 10%. 

If not, you know which line is unbalanced 

and by how much. 

Equal currents in the feeder wires minimize 

feedline radiation and reduces pattern 

distortion, RFI, TVI and wasted power. 

You could lose up to 10% of your power. 

Imbalance is due to feedline not being 

perpendicular to antenna, if one side runs 

close to metal or is shorter or closer to ground. 

The MFJ-836 helps you solve all your 

unbalanced problems. 

Heavy-duty 5-way binding posts for 

feedlines. Use 12 VDC or 110 VAC with 

MFJ-1312D, $15.95. 6Wx3½Hx4½D in. 

readings -- clamp on mobile whip/ 

vertical. Adjust for maximum radiated 

current. Determine radiated 

power/losses. Profile its current 

distribution -- it's maximum at 

base and tapers to zero at end. 

Use like MFJ-854 to do many 

of its tasks. 0.3, 1, 3 Ampere 

ranges. Small 2¼Wx3¾Hx1D in. 

MFJ-853H, $69.95. Like 

MFJ-853, but has 3, 10, 30 

Ampere high-current ranges. 

know when you’ve suppressed 

the problem. Easy-to-use. 

Clamp current transformer over 

suspected cable or wire (up to 

1 /4 in. dia.) to detect RFI causing 

common-mode currents. 

2 1 /4Wx4 3 /4H x1D inches fits in 

shirt pocket. Use 9 Volt battery. 

Usable VLF to VHF. Gain 

adjustable over 50 dB range. 

MFJ . . . The World Leader in Ham Radio Accessories 19

MFJ-868 World's largest SWR/Wattmeter has giant 6½ inch meter 

World's largest HF 

SWR/Wattmeter measures a 

giant 6½ inches diagonally 

across meter scale! 

This one you can See! 

Its huge scale gives you ultra-fine resolution 

and its big high-contrast numbers 

makes reading a breeze -- even across 

your shack. 

The meter needle position and motion 

gives you an accurate indication for 

what's going on quickly without actually 

reading the scale -- like your analog 

watch. True Peak Reading Circuit 

MFJ's exclusive TrueActive TM peak 

reading circuit captures true peak or average 

forward and reflected power readings. 

Has 20/200/ 2000 Watt ranges makes it 

valuable for QRP or QRO operation. 

Full SWR Scale 

The full SWR scale makes reading SWR 

Find Power Line Noise Fast! 

Choose 

the highly directional 

3 element 

Yagi (MFJ-856, 

$159.95) for pinpoint 

accuracy or the compact 

telescoping dipole (MFJ-852, 

$119.95) for quick noise finds. 

Walk or drive around with 

these handheld power line noise 

meters to search out leaky insulators, 

loose hardware and corroded 

ground lines quickly. Track noise 

right down to the pole,transformer 

or insulator, or other source. 

Operates in the 135 MHz region 

where activity is a minimum and 

radiation from corona and arcing 

is far more localized. 0.3 uV sensitivity 

and wide-range AGC for 


$ 149 95 

Ship Code B 

Giant 6 1 /2” Meter!!! 

Giant Automatic SWR/Wattmeter 


$ 159 95 

Ship Code B 

Fully-automatic auto 

ranging MFJ-869 has a giant 

61 /2 inch meter. 

MFJ-869 has 20/200/2000 

Watt scales with a TruePeakTM active circuit 

and average forward and reflected power 

modes and fully-automatic SWR readings. 

It also has an Amplifier Bypass 

ControlTM and Control Relay for high SWR. 

MFJ-869 has Field-upgradeable 

firmware. Has high SWR Audio and Visual 

Alarms to warn you of imminent danger to 

your expensive electronic equipment. 

It covers 1.8-60 MHz frequency ranges. 

It’s an all-new microprocessor design 

that’ll give you years of use. Has seven 

LED indicators. All-metal attractive black 

cabinet measures 7Wx51 MFJ-869 

$ 95 219 

Ship Code B 



$ 119 95 

Ship Code A 


$ 95 49 

Ship Code A 

noise level meter -- over 70 dB! 

Plug in headphones and hear 

noise you’re tracking or plug in a 

tape recorder. 2Wx4Hx1.5D in. 

Use this ultra-sensitive pocketsized 

RFI Detector to track down 

and eliminate RFI caused by radiating 

cables and wires. It’ll tell 

exactly which cable is radiating 

RFI so you can eliminate it with a 

simple toroid or clamp-on filter. 

Find RFI generated by consumer 

devices, computers and office equipment. 

Eliminate the RFI source and 

hash, birdies, whistles and transient 

noises amazingly disappear. 

MFJ-1767, $79.95. Add this 3element 

beam to your MFJ-852, 

and turn it into an RFI finder. 

MFJ Field Strength Meters 

40-inch 

Balanced 

Dipole FS 

Meter 

Determine 

radiation pattern; make 

changes to your antenna 

and see if it radiates better 

or worse. Adjust a 

ground lead, artificial ground, 

counterpoise or tune your 

transmitter or antenna tuner 

for maximum field strength. 

Check for floating RF. Use 

from 100 KHz to 500 MHz. 

Balanced Dipole 

Field Strength Meter 

MFJ-802, $49.95. Sensitive 

telescoping 40-inch balanced 

dipole is ground independent 

and reduces influence of surroundings. 

Big 3-inch meter. 

Sensitivity control lets you 

handle milliwatt to kilowatt 


much more accurate and easier to read. 

Power Saver TM Circuit 

Exclusive MFJ Wattmeter Power 

Saver TM circuit turns on meter only when 

RF power is being measured. 

Covers 1.8-30 MHz. Use 9 volt battery 

or 12 VDC or 110 VAC with optional 

MFJ-1312D, $15.95. Cabinet measures 

7Wx5 1 /2Hx5D inches. 

World’s Largest VHF/UHF 

SWR/Wattmeter! 

MFJ-867, 

$159.95. MFJ-867 is 

similar to MFJ-868 

giant wattmeter but 

covers 144/220/440 

MHz frequencies. Has 

400/200/20 Watt 

ranges. 

MFJ HF QRP Wattmeter 

and SWR Bridge 


$ 39 95 

Ship Code A 

Read forward 

and 

reflected 

power from 0-5 Watts on a calibrated 

meter scale -- Plus read SWR and relative 

power at any power level from 100 mW 

to 50 Watts. Bruene-style bridge circuit 

detects both RF current and RF voltage to 

ensure uniform accuracy across a wide 

range of load impedances, operating frequencies, 

and power levels. It’s a great 

tool for working on your QRP radios, running 

on-air QRP signal trials, or setting 

up antennas out in the field. Covers 1.8 

to 50 MHz. SO-239 UHF connectors. 

Rugged black aluminum case measures a 

compact 4 1 /2Wx2 1 /4Hx3D inches. 

signals. Jack for MFJ-802R 

remote RF sensing head. 


MFJ-802R, $34.95. Read 

your field strength remotely 

where you can control your 

transmitter or rotate your 

beam. Requires shielded two 

conductor cable (not included). 

2 3 /8Wx3 5 /8Hx 

1D inches. 

MFJ-802X, $74.90, MFJ- 

802 field strength meter and 

MFJ-802R, remote sensor 

combination. Saves $! 

Telescoping Whip 

Field Strength Meter 

Take quick field-strength 

readings with this compact 

telescoping whip field 

strength meter. 1 3 /4 inch 

meter. Sensitivity control. 

20 inches 

(extended) monopole. 

Finger contact on side 


$ 29 95 

Ship Code A 

increases sensitivity 

when needed. 

2 3 /8x3 5 /8x1 inches.

MFJ Compact HF, VHF, UHF SWR/Wattmeters 


$ 59 95 

Ship Code A 


$ 69 95 

Ship Code A 


$ 99 95 

Ship Code A 

This MFJ 

Cross-Needle 

SWR/wattmeter covers HF thru VHF -- 

1.8-60 MHz, 144 MHz, and 440 MHz 

bands -- for only 99.95! 

MFJ-864, $99.95, Cross-Needle Meter 

reads forward and reflected power and SWR 

simultaneously and features separate HF and 

VHF/UHF directional couplers, each with 

its own SO-239 connectors. 

This lets you connect your HF and VHF/ 

UHF (1.8-60, 144, and 440 MHz bands) 

transceivers at the same time. You can then 

monitor SWR and power of either transceiver 

at the flick of a switch. Others have a 

single set of connectors -- you have to plug 

and unplug to use separate HF or VHF rigs. 

Power ranges: 30/300 watts forward 

and 6/60 watts reflected. Each power range 

for each band is individually calibrated. 

Schottky diodes are used for best accuracy. 

Single knob operation makes it easy to 

use and the meter is lighted for easy reading. 

Meter uses 12 VDC or 110 VAC with 

optional adapter, MFJ-1312D, $15.95. 

The all metal cabinet has a tough vinyl 

cladding. You won’t find a tougher, longer 

lasting finish anywhere. MFJ-864 measures 

a compact 7 1 /4 Wx2 1 /2Hx2 1 /4D inches. 

MFJ-862, $69.95, similar to MFJ-864 

but covers 144/220/440 MHz. 30/300 Watts 

forward, 6/60 Watts reflected ranges. 5 3 /4x 

2 1 /2x2 1 / 4 in. Has one sensor for all 3 bands. 

MFJ-860, $59.95, similar to MFJ-864 

but for 1.8-60 MHz only. Push button 

selects 30/300 Watts forward, 6/60 Watts 

reflected. Compact 4 1 /2x2 1 /4x3 inches. 

MFJ GrandMaster TM SWR/Wattmeter Series 

GrandMaster TM SWR/Power Meters are 

the Cadillacs of ham radio! If you will not 

settle for less than the best accuracy and 

precision these GrandMasters TM are for you. 

You get a large 3 1 /4x1 1 /4 inch precision 

illuminated meter for easy wide-angle 

viewing. A highly visible black and red 

meter scale on a bright white background 

makes it quick and easy to read SWR, for- 

1.8-30 MHz SWR/Wattmeter 

with TrueActive TM Peak Reading circuit 

MFJ-815C 

$ 95 89 

Ship Code A 

• Built-In LED 

Lamp Backlight 

• Large 3-Inch 

Cross-Needle Meter 

•TrueActive TM Peak 

Reading Circuit 

MFJ-815C reads true-peak or average 

power on a large illuminated three-inch 

Cross-Needle Meter. 

Its TrueActive TM peak reading circuit 

gives you an incredibly accurate SWR and 

power reading in SSB and CW over a wide 

frequency range. 

The Cross-Needle Meter reads SWR and 

true peak average, forward and reflected 

power simultaneously -- all in a single 

glance. 

You get Frequency coverage from 1.8 to 

30 MHz. Has mechanical adjustment for 

accurately zeroing the meter. 

Continues right . . . 

ward or reflected power. Lamp requires 

13.8 VDC or 110 VAC operation. 

A functional and simple front panel layout 

lets you select power ranges, bands or 

make SWR readings intuitively. 

The GrandMaster TM series feature an 

SWR scale that extends the full view of the 

meter. 3:1 SWR is centered at mid-scale to 

give you precision, wide-range measurements. 

All GrandMasters TM feature peak and 

average, forward and reflected power readings 

and have selectable power ranges. 

Each GrandMaster TM is housed in an all 

metal cabinet with rubber feet and protected 

by durable speckled black paint. A 

designer injection molded grey front panel 

VHF/UHF SWR/Wattmeter 

with TrueActive TM Peak Reading circuit 

Like MFJ-815C but for MFJ-817C 

$ 95 

144/220/440 MHz, VHF/ UHF 99 

bands. LED backlight. 

Ship Code A 

Reads SWR and true 

peak/average forward and reflected power 

simultaneously, all in a single glance! 

Has two ranges: 300/30 Watts and 60/6 

Watts simultaneously. SWR 1:1 to 8:1. 

MFJ-815C Continued from left . . . 

Push button selects range, meter lamp 

on/off and peak for SSB or average for CW 

operation. SO-239 Connectors. 

MFJ-815C has 3000 and 300 Watts forward 

and 600/60 Watts reflected power 

ranges. Read SWR from 1:1 to 8:1. 

LED Meter lamp uses 12 VDC or 110 

VAC with optional MFJ-1312D, $15.95. 

TrueActive TM Peak Reading Circuit can 

use 9 Volt battery. 

All metal black aluminum cabinet measures 

6Wx3 1 /2H x4 1 /2D inches. 

perfectly matches any transceiver. 


Air dielectric SO-239 connectors with 

gold plated center pins gives superb performance 

to beyond 525 MHz. 

GrandMasters TM are precisely factory 

calibrated for accurate measurments. 

Choose from four MFJ GrandMasters TM 

MFJ-870, $79.95. HF, covers 1.6 to 

60 MHz. 30, 300, 3000 Watt power ranges. 

MFJ-872, $79.95. HF/VHF, covers 

1.8 to 200 MHz. 5, 20, 200W power ranges. 

MFJ-873, $79.95. VHF/UHF, covers 

125-525 MHz. 5, 20, 200W power ranges. 

MFJ-874, $109.95. HF/VHF/UHF, 

covers 1.8-525 MHz. 5, 20, 200W power 

ranges. 

VHF SWR Wattmeter 

plus Field Strength 


$ 95 39 

Ship Code A 


812B is 

the world’s 

most popular 

-- and most affordable -- VHF 

SWR/Wattmeter. Has a built-in field 

strength meter. Covers 2 Meters and 220 

MHz. Reads forward and reflected power 

in two ranges -- 30 or 300 Watts. 

Reads SWR from 14 MHz through 220 

MHz. Also reads relative field strength 

from 1 to 220 MHz. Has binding post for 

field strength antenna. Black. 

41 /2Wx21 /4Hx3D inches. 

Econo HF SWR/Wattmeter 


$ 95 39 

Ship Code A 


816 HF 

SWR/ 

Wattmeter 

lets you read forward and reflected power 

on two scales -- 30 and 300 Watts -- and 

SWR from 1.8 to 30 MHz. Toroid current 

pickup gives uniform sensitivity. Easy 

push-button operation. Sturdy black aluminum 

cabinet. SO-239 connectors. 2color 

meter scale. 4 1 /2Wx 2 1 /4 Hx3D inches 

-- makes it ideal for portable use. 

MFJ...the world leader in ham radio accessories 21

High-accuracy MFJ Digital SWR/Wattmeter, 1.8-54 MHz, 1500 Watts 

MFJ’s high-accuracy digital 

SWR/Wattmeter/Frequency Counter measures 

up to 1500 Watts. 

You get three high-resolution ranges 

with accuracy in each range, 1.8 to 54 MHz! 

True peak or average forward and 

reflected Watts, SWR and frequency can 

be simultaneously displayed. 

You can also select auto-ranging bargraph 

modes to display forward and 

reflected power or forward power and 

SWR twin bargraphs or SWR only bargraph. 

Frequency, SWR and forward 

power are also displayed numerically. 

PeakHold TM feature freezes the highest 

forward power displayed bar segment for 

one second. 

These digital-analog displays make it visually 

easy to tune antenna tuners, amplifiers 

and transmitters. 

You get three high-resolution 

forward/reflected power ranges that are 

automatically selected: a true QRP range 

(25 Watt full scale), a mid-range (250 

MFJ-844 VHF/UHF SWR 

Mobile Power Meter 


covers 144 

and 440 

MHz. 

Insertion loss 

is 0.3 dB or 

lower with 50 

Ohm impedance. SO-239 connectors. 

Its tiny size lets you put it just about anywhere 

in your operating position. 33 /4Wx3H 

x11 MFJ-844 

$ 95 69 Ship Code A 


Handles 200 Watts and measures SWR 

and Power in three power ranges: 15W, 

60W, and 200W. 

A multi-colored white, orange, and black 

meter face makes for easy reading in quick 

glances. 

Extra large, highly visible meter. Diecast 

metal, quality connectors for years of use. 

MFJ GrandMaster TM Cross-Needle SWR/Wattmeters 

LED Backlighted, Highly Accurate, Attractive Styling, 3-Color Meter Scale . . . 

If you will not settle for less than the 

best accuracy and precision then these 

handsome GrandMastersTM MFJ-883 (1.8-525 MHz) pictured. 

are for you. 

You get a 3-inch precision illuminated 

Cross-Needle meter for easy wide-angle 

viewing. Read SWR, forward and reflected 

Watts full scale) and a 

high-range (1500 Watts 

full scale). Each range has 

excellent resolution. 


$ 179 95 

Ship Code B 

MFJ’s TrueActive TM peak reading circuit 

gives you true peak or average power on 

all modes. 

Built-in frequency counter gives any 

transmitter digital frequency readout in 

continuous carrier mode. Perfect for older 

and QRP rigs such as MFJ-9420 travel 

radios and MFJ-9340 QRPCubs TM kits and 

wired transceivers. 

All information is displayed on a big 2- 

power all in a single glance! 

Three-color scale gives you improved 

readability and reliability. LED backlight 

gives excellent night vision. Re-quires 

13.8 VDC or 110/VAC operation. 

Each unit is precisely factory calibrated 

for accurate measurements. 

Air-Dielectric SO-239 connectors with 

gold plated center pins give superb performance 

to beyond 525 MHz. 

A functional and simple front panel layout 

lets you select power ranges, bands, or 

make SWR readings intuitively. 

Four models to choose from . . . 

MFJ-880, $89.95. HF, covers 1.6 to 60 

MHz, Power range 0-2000 Watts in 3 

ranges: 20/200/2000 Watts. 

MFJ-882, $89.95. HF and VHF. 1.8 to 

22 MFJ...the world leader in ham radio accessories 

line, 16- character, high-contrast backlit 

LCD display. 

Use 12 VDC or 110 VAC with optional 

MFJ-1312D, $15.95. Attractive all metal 

black cabinet measures 6 1 /2Wx2 5 /8Hx6D in. 

Digital and Cross-Needle SWR/Wattmeter 


$ 229 95 

Ship Code B 

MFJ-828 has ALL of the features of the MFJ- 

826B 1.8-60 MHz, 1500 Watts high-accuracy digital 

SWR/Wattmeter/Frequency Counter . . . 

PLUS . . . it has a large, lighted Cross-Needle 

SWR/ Wattmeter and Amplifier Bypass Control TM 

Compact 

HF/VHF 

and 

VHF/UHF 

SWR/ 

Wattmeter. 

Has huge 

3” Crossneedle 

meter. Read forward/reflected power and 

SWR simultaneously. 

Perfect for mobile or portable operation. 

Two selectable power ranges, built-in 

meter light (+12 VDC). SO-239 connectors. 

31 /4Wx31 /4Hx31 (protects amplifier during high SWR events), and Control Relay 

with normally open and closed connections that toggles when 

SWR is above a pre-set limit. Field-upgradeable firmware. 

Compact Cross-Needle Ruggedized flat Mobile/ 

SWR/Wattmeters portable SWR/Wattmeter 


MFJ-822 or 

$ 95 


79 

$ 95 

Ship Code A 

59 

Ship Code A 

MFJ's 

flat, compactSWR/Wattmeter 

is 

plenty rugged to take the abuse of brutal 

mobile or portable operation. Easily mounts 

on dash for easy viewing. Flat mount on 

wall/shelf in shack for best view angle. 

Meter is fully enclosed in a strong aluminum 

case with just the scales exposed. 

Only two small switches slightly protrude 

so there's little to break. 

Simultaneously read SWR/forward/ 

reflected power on this full size 3-inch 

lighted Cross-Needle Meter. Use 12 VDC 

/4D in. 

for meter lamp or plug into cigarette lighter 

MFJ-822 covers 1.8-200 MHz, 30 or with MFJ-5510, $9.95. 30/300 Watt ranges, 

300 Watts. MFJ-842 covers 140-525 1.8-30 MHz, SO-239. Tiny all-metal cabinet 

MHz, 15 or 150 Watts. 

has rubber feet. 5Wx3Hx2D inches. 

200 MHz, power range of 0-200 Watts in 

three ranges: 2/20/200 Watts. 

MFJ-883, $89.95. VHF and UHF, 125 

to 525 MHz, power range 0-200 Watts in 

three ranges: 2/20/200 Watts. 

MFJ-884, $109.95. HF/VHF and UHF, 

1.8 to 525 MHz, power range 0-200 Watts 

in three ranges: 2/20/200 Watts. Has separate 

HF and VHF/UHF power sensors with 

SO-239 connectors. 

All GrandMasters TM feature peak and 

average, forward and reflected power readings 

and have selectable power ranges. 

Each GrandMaster TM is housed in an allmetal 

cabinet with rubber feet and protected 

by a durable speckled black paint. A 

designer injection molded grey front panel 

perfectly matches any transceiver. 

Measures 5 1 /2Wx3 1 /8H5D inches.

MFJ Giant Cross-Needle Peak-Reading SWR/Wattmeters 

Extra-Large 3 5 /8 inch meter . . . Read forward/reflected power and SWR at a glance . . . Individual Meter scales for each power range 

. . . LED backlighting . . .Three-color scale . . . True directional coupler . . . Low bias Schottky Diode Detectors for increased linearity 

from low power to high power . . . . 

These new MFJ Giant SWR/Watt-meter 

series have large 3 5 /8 inch Cross-Needle 

SWR/Watt-meters that have a three-color 

scale for improved readability. 

These wattmeters simultaneously display 

forward/reflected power and SWR all at a 

glance! They each have individual meter 

scales for each power range that increase 

reading accuracy. 

A True TM Active peak-reading circuit is 

included for SSB operation (MFJ-891 only). 

LED backlighting provides smooth and 

even illumination for easy night viewing. 

Low bias Schottky diode detectors 

increase linearity from low power to high 

power readings. 

A true directional coupler for increased 

accuracy gives solid readings over the 

entire frequency range, HF to UHF. DC 

grounded antenna connectors prevent electrostatic 

build up. 

MFJ-891 SWR less than 1.2:1. 

$ 95 109 Meter accuracy is +/- 10% of 

Ship Code A 

full scale or better. Has lighted 

meter on/off switch. 

These wattmeters are extra sturdy with 

large rubber feet and a rugged metal and a 

designer-styled plastic injection molded 

front panel. Handsome black speckled finish 

and gray molded front panel aesthetically 

complements today’s modern transceivers. 

Quality SO-239 connectors. 

MFJ Rhinos TM 2, 3, 4 Position Antenna Switches 

Built tough, built to last and built to work for a long lifespan! 

Gold-plated flange and connector contacts . . . Rock-Solid die-cast design . . . Low VSWR . . . Low inser- 

tion loss . . . Handles power up to 2 kW . . . DC to 3 GHz . . . Eight models to choose from . . . 

MFJ’s RhinosTM tough, durable 2, 3, and 4 

position antenna switches have gold plated 

flanges and connector contacts that provide 

low VSWR and low insertion loss. 

A rock-solid, sturdy, die-cast design 

gives up to an excellent 70 dB isolation. 

These switches are build like a rhino, tough 

inside and out! A superior internal design 

lets them work for you for a long lifespan. 

RhinosTM tions, SO-239. 2 

handle power up to 2 kW. 

Operating frequency ranges from DC to 3 

GHZ with less than a 1.2:1 SWR. A super 

compact size lets you put them anywhere. 

Handy premade mounting holes. 

Eight models to choose from . . . 

MFJ-2702, $32.95. 1 GHz, 2 posi- 

3 /4Wx31 /2Hx13 /4D inches. 

MFJ-2702N, $42.95. 3 GHz, 2 positions, 

N-type. 23 /4Wx31 /2Hx13 /4D inches. 

MFJ-2703, $64.95. 800 MHz, 3 positions, 

SO-239. 31 /8Wx31 /2Hx13 /4D inches. 

MFJ-2703N, $74.95. 1.5 GHz, 3 positions, 

N-type. 31 /8Wx31 /2Hx13 /4D inches. 

MFJ-2704, $89.95. 900 MHz, 4 positions, 

SO-239. 41 /4Wx4Hx13 /4D inches. 

MFJ-2704N, $99.95. 1.5 GHz, 4 positions, 

N-type. 41 /4Wx4Hx13 /4D inches. 

MFJ-2704M2, $99.95. 900 MHz, 4 pos., 

Inputs are SO-239, outputs are two each: 

SO-239, N-type. 41 /4Wx4H x13 /4D in. 

MFJ-2704N2, $99.95. 1.5 GHz, 4 pos., 

Inputs are N-type, outputs are two each: 

SO-239, N-type. 41 /4Wx4H x13 Heavy duty 

die-cast 

construction 

Gold-plated 

flange and 

connector 

contacts 

Excellent 70 dB 

isolation 

Quality 

connectors 



$ 95 89 

SO-239,900 MHz 

Ship Code A 

MFJ-2704M2 

$ 95 99 

239/N, 900 MHz 

Ship Code A 

MFJ-2704N 

$ 99 95 

N-type, 1.5 GHz 

Ship Code A 

MFJ-2704N2 

$ 99 95 

N/239, 1.5 GHz 

Ship Code A 

Inside View of MFJ-2703, $64.95 

MFJ Rhino TM Series Antenna Switch Specifications 

Model No. MFJ-2702 MFJ2702N MFJ-2703 MFJ2703N MFJ-2704 MFJ2704N MFJ2704M2 MFJ2704N2 

Price $32.95 $42.95 $64.95 $74.95 $89.95 $99.95 $99.95 $99.95 

Useable Freq. 

Power Rating 

1 GHz 3 GHz 800 MHz 1.5 GHz 900 MHz 1.5 GHz 900 MHz 1.5 GHz 

DC-30 MHz 

30-200 MHz 

200-500 MHz 

2 kW 

1 kW 

500 W 

2 kW 

1 kW 

500 W 

2 kW 

1 kW 

500 W 

2 kW 

1 kW 

500 W 

1.5 kW 

1 kW 

500 W 

1.5 kW 

1 kW 

500 W 

1.5 kW 

1 kW 

500 W 

1.5 kW 

1 kW 

500 W 

500-900 MHz 250 W 250 W 250 W 150 W 250 W 250 W 250 W 250 W 

.900-1.5 GHz 

Insertion Loss 

150W 

150 W 

150 W 

DC-500 MHz >= .05dB >= .05dB >= .05dB >= .05dB >= .10dB >= .10dB >= .10dB >= .10dB 

500-900 MHz >= .10 dB >= .10 dB >= .10 dB >= .10 dB >= .20 dB >= .20 dB >= .20 dB >= .20 dB 

.900-1.5 GHz 

>= .15 dB 

>= .15 dB 

>= .30 dB 

>= .30 dB 

1.5 - 3 GHz 

Output Isolat. 

>= .20 dB 

>= .20 dB 

DC-500 MHz 

500-900 MHz 

= 1.25 

Grounded 

Unused Output 

NO NO YES YES YES YES YES YES 


Select from the following frequency 

range models: 


Covers 1.6 to 60 MHz. Handles 2 kW 

in three ranges: 20/200/2000 Watts. MFJ- 

891 has precision TrueActive TM PEP 

Circuit for SSB operation. 


Covers 1.6 to 200 MHz. Handles 200 

Watts in three ranges: 2/20/200 Watts. 


Covers 125-525 MHz. Handles 200 

Watts in three ranges: 2/20/200 Watts. 


Two input sensors. 

Covers 1.6-60 MHz 

and 125-525 MHz. 

Incorporate two RF 

sensors for HF or 

VHF/ UHF operation. Handles 200 Watts 

in three ranges: 2/20/200 Watts. 


$ 95 64 

SO-239 

800 MHz 

Ship Code A 


$ 74 95 

N-type 

1.5 GHz 

Ship Code A 


$ 95 32 

SO-239, 

DC-1 GHz 

Ship Code A 


$ 95 42 

N-type, 

3 GHz 

Ship Code A 

MFJ...the world leader in ham radio accessories 23 

MFJ 

MFJ-894

MFJ Desktop or Remote Antenna Switches 

Desk/Remote 6/4 pos. Antenna 

Switches 

Use this 

MFJ-4716 Sixposition 

Antenna Switch 

on your desk or place it 

out-of-way under your 

desk or in another room 

and use a remote control. 

A simple rotary switch 

lets you select 1 of 6 antennas. 

All unused inputs are 

grounded. You can connect a sense line to your transceiver so 

when it’s off, all inputs are automatically grounded. 

In the OFF position, all inputs are grounded or control is transferred 

to the MFJ-4716RC, $39.95, Remote Control. 

Ultra-fast gas discharge tube lightning surge protector protects 

transceiver and safely shunts static electricity and lightning induced 

surges safely to ground. Does not protect against a direct lightning hit. 

Super easy-to-use -- just one simple rotary switch. There are 

no complicated computer buttons to learn or microprocessors to 

fail or generate RFI that could mask rare DX. 

SO-239 connectors. 1500 Watts/50-75 Ohm load, 1-60 MHz. 

Useable to 150 MHz. Connects to MFJ-2716RC remote control 

with common CAT 5 cable, not included (available from MFJ, see 

below.). Use 12 VDC or 110 VDC with MFJ-1312D, $15.95. 

8Wx23 /4Hx41 /4D inches. For indoor use, not weather protected. 

MFJ-4716RC, $39.95. 6-position. Remote Control for MFJ- 

4716. CAT 5 cable not included. Tiny 23 /4Wx33 MFJ-4716 

$ 95 89 

Ship Code B 


4-Position Desktop/Remote Antenna Switch 

MFJ-4714, $79.95. Like MFJ-4716, but switches 

between four antennas. 

MFJ-4714RC, $39.95. 4-position Remote 

Control for MFJ-4714, 4 antenna desktop/remote 

antenna switch. 

Cat-5 Cable for Antenna Switches 

MFJ-5262, $6.95. 7’ CAT-5 cable with connectors. 

MFJ-5265, $23.95. 25’ CAT-5 cable/connectors. 

(back of unit) 


$ 95 79 

Ship Code B 

Rig/Antenna RF Safety 

Switch 


This MFJ 2-position remote antenna switch 

uses a single coaxial feedline to feed two 

antennas, DC power and control signals -- no 

power or control cable needed. 

It’s perfect for switching from HF to VHF - 

- no more unplugging coaxial lines from your 

antennas just to switch frequency -- a quick 

switch does it for you. 

MFJ-4712 covers 1.8 MHz-150 MHz and 

handles 1500 Watts. Impedance is 50-75 Ohms. 

The compact 4Wx2 5 /8Hx1 1 /2D inch Outside 

MFJ RF Sense T/R Switch 

Automatic T/R Switch 

senses transmitted RF and 

switches your antenna from 

receive to transmit using a 

relay. Shorts your receiver 

antenna input to ground to protect 

your receiver. Provides an auxiliary 

contact closure to ground 

during receive (opened in transmit) for muting 

speaker, an “On-Air” sign or other use. 

Instead of using RF sense to switch the antenna, 

a control line input lets your key/keyer 

or PTT line switch the antenna. Adjustable 

time delay circuit gives you delayed switching. 

All modes. 200 Watts SSB PEP. 

Measures 4Wx25 /8Hx11 MFJ-1703 

$ 95 29 1703 keeps 

Ship Code A 

your expensive 

transceivers safe 

from transmitting into 

nothing! No more 

burning up your radio 

because you forgot to 

change your antenna 

switch! 1.8 to 30 MHz. 

Your transceiver is always hooked up to 

one of two antennas! Connect two rigs and 

two antennas and switch to different combinations. 

300 watts PEP SSB, 150 watts 

CW. Handy mounting tabs. All metal, 

switches 50-75 Ohm unbalanced lines. 


$ 95 79 

Ship Code A 

/2D inches. 12 VDC 



Desktop/Remote 6 & 4 position 

Antenna/Transceiver Switches 

(backofunit) 

Place this MFJ- MFJ-4726 

4726 Six-Position $ 95 

Antenna/ Transceiver 159 

Ship Code B 

Switch on your desk 

or place it out-of-way under your 

desk or in another room and use a 

remote control. Select one of six 

antennas and one of six transceivers 

in any combination with just 2 easyto-use 

rotary switches. 

Plug in antenna tuner, 

SWR/Wattmeter or other into its 

common ports, so it is always connected 

to the antenna and radio 

selected. 

All unused inputs are grounded. 

When rotary switches are in OFF 

position, all inputs are grounded or 

control is transferred to MFJ- 

4726RC, $59.95, remote control. 

Automatically grounds all inputs when you turn off transceiver. 

Lightning surge protector protects transceivers and shunts 

surges to ground. Does not protect against a direct lightning hit. 

SO-239s. 1500 Watts into 50-75 Ohm load 1-60 MHz. Useable 

to 150 MHz. Use CAT 5 cable for remote control, not included 

(Buy from MFJ, see below). Use 12 VDC or 110 VAC with MFJ- 

1312D, $15.95. For indoors, not weather protected. 8Wx5Hx4 1 /4D”. 

MFJ-4726RC, $59.95. 6-position. Remote control for MFJ- 

4726. Use CAT 5 cable, not included. 

4-Position Desktop/Remote Ant./Xcvr Switch 

MFJ-4724, $139.95. Like MFJ-4726, but switches 

between four antennas/transceivers. 

MFJ-4724RC, $59.95. 4-position Remote 

Control for MFJ-4724. Tiny 2 3 /4Wx3 3 /4Hx1D inches. 

Cat-5 Cable for Antenna Switches 

MFJ-5262, $6.95. 7’ CAT-5 cable with connectors. 

MFJ-5265, $23.95. 25’ CAT-5 cable/connectors. 

MFJ 2-Position Remote Antenna Switch 

Switch Box is fully enclosed and weather protected. 

It also has three quality Teflon (R) SO- 

239 connectors for transmitter, antenna one 

and antenna two. 

It uses a Stainless steel 1 1 /2” tall bracket 

with a U-bolt for masts up to 1 1 /2 in. O.D. 

Inside remote control unit is a tiny 

2 1 /4Wx2 1 /2Hx1 1 /4 inches. 

The MFJ-4712 is protected by MFJ’s 

famous one year NoMatterWhat TM limited 

warranty. 

Automatically Switch your Rig 

between 2 Antennas 

There are times when you 

want to use separate transmitting 

and receiving antennas but your 

transceiver has only one antenna 

port. For example, an efficient 75M 

vertical for transmitting and a sep- 


$ 89 95 

Ship Code A 

arate low noise Beverage for receiving. With 

an MFJ-1707, simply connect your transceiver, 

transmit and receive antennas. As soon as you 

key your rig, the MFJ-1707 RF sensing circuitry 

instantly switches your rig from receiving 

antenna to transmitting antenna. Your amplifier 

control output of your transceiver can also 

automatically switch antennas. Adjustable 

delay prevents transmit antenna from instantly 

switching to receive. Auxiliary contact closure 

to ground during receive. All modes. 

200W SSB PEP. 4Wx2 5 /8Hx1 1 /2D”. Use 12 

VDC or 110 VAC with MFJ-1312D, $15.95.

Lightning Protected Heavy Duty Coax Switches 

MFJ gives you a center ground position, automatic grounding of 

unused positions, handles 2.5 kW PEP and works to over 500 MHz! 


$ 95 79 

Ship Code A 

Mount this 4-position SO-239 switch on 

your operating desk and you’ll have more 

than the convenience of being able to 

instantly select any of four antennas or the 

center ground position -- you’ll also get the 

replaceable lightning surge protection device 

that helps protect against distant lightning 

induced surges and static. Handles a full 2.5 

kW PEP. Extremely low SWR. Isolation is 

rated from better than 60 dB at 30 MHz to 

better than 50 dB isolation at 500 MHz, negligible 

insertion loss, 50 Ohms. 

MFJ-1704N, $84.95. Like MFJ-1704, with 

“N” type connectors. 

MFJ-1702C 2-position Coax Switch has 

a new lightning surge protection device that 

helps protect against distant lightning 

induced surges and static. MFJ-1704 and 

MFJ-1702C have a (sets antenna to ground) 

center ground position and handles 2.5 kW 

PEP, 1 kW CW. It has better than 60 dB 

isolation at 300 MHz and better than 40 dB 

at 450 MHz. 50 Ohms. Unused terminals 

are automatically grounded for static and RF 

New and Improved MFJ-1700C! 

MFJ-1700C, $99.95. 

The new MFJ-1700C adds lightning 

surge protection and much better isolation 

between connectors, wires. 

This high power Antenna/Transceiver 

Switch lets you select one of six antennas 

and one of six different transceivers in any 

combination. 

You can also plug in an antenna tuner, 

SWR wattmeter, other electronic equipment. 

Has quality SO-239 connectors. 

You are always connected to the antenna 

and radio selected. MFJ-1700C handles 2 

kW PEP SSB, 50-75 Ohm loads. 

Unused terminals are automatically 

grounded. SO-239 connectors. Covers 1.8 

to 30 MHz. Measures 4 3 /4W6 1 /2Hx3D in. 

protection. It has less than 0.2 dB insertion 

loss and SWR below 1.2:1. The MFJ- 

1702C hasa heavy cavity type construction 

and uses SO-239 connectors. Has handy 

mounting holes. Measures 3Wx2Hx2D in. 

MFJ-1702CN, $44.95. Like MFJ- 

1702C, with “N” type connectors. Covers 

DC to 1.1 GHz. 

MFJ-1702, $19.95. Like MFJ-1702C, 

less lightning surge protection, center ground. 

MFJ Six Position Antenna/Transceiver and Antenna Switches 


$ 95 99 

Ship Code B 

MFJ 12-Position Coax Patch Panel 


$ 79 95 

Ship Code A 


Coax 

Patch 

Panel 

connects 

devices 

with virtually no loss, feed-through or 

cross-talk . . . 

Provides 12 Teflon (R) SO-239 coax 

feedthru barrel connectors to patch 12 coax 

fed devices together with short coax jumpers. 

This extremely high performance and versatile 

military/professional patch panel 

approach has virtually no loss, no feed-thru 

and no cross-talk -- depends only on the 

quality of your coax -- and has far better 

performance than any switching system. 

To use, connect your coax fed devices 

(rigs, antennas, SWR/Watt-meters, tuners, 

amplifiers, preamps, switches, and other 

Lightning 

Surge 

Protection 

Super! 

MFJ-1704 and MFJ-1702C 

are lightning protected and have an 

exclusive center ground position -- connects 

antennas to ground and disconnects 

your radio from use. 

electronic equipment) to coax connectors 

inside the patch panel. 

Each device is then available on the 

front panel and can be connected to any 

other device using a short coax patch cable. 

All devices can be used at the same time. 

Cables enter through side or rear on 

either side. Has wing nut for ground. 

Side or back mounting tabs let you mount 

to a wall, under your table, or on ham station 

desk. 

Compact 9Wx5Hx4D inches fits just 

about anywhere. 

MFJ 8-Pos. Coax Patch Panel 


$69.95. Similar to 

MFJ-4706 but for 8 

coax-fed devices. 

Both are protected 

by MFJ’s famous No 

Matter What TM one 

year limited warranty. 


$ 95 39 

Ship Code A 

6 Position HF Antenna Switch 

MFJ-1701, $69.95, lets you 

select one of six antennas. 

Covers 1.8-30 MHz. 

Unused terminals are automatically 

grounded. Quality SO-239 connectors 

for hook-up to your antennas. 

Handles 2 kW PEP SSB, 1 kW CW, 50- 

75 Ohm loads. Measures a compact 

10Wx3Hx11 MFJ-1701 

$ 95 69 Ship Code B 


MFJ Balanced line 

antenna switch 


$ 109 95 

Ship Code B 


$ 95 19 

Ship Code A 

Use one of six different 

balanced feedlines from 1.8 to 

30 MHz. Has handy, versatile 

5-way binding posts. Handles 1500 Watts 

PEP SSB. All metal enclosure has silkscreened 

label positions. 9Wx3 1 /4Hx6 1 /2D”. 

MFJ-1706H, $119.95, similar, but has 

high-voltage glazed ceramic feedthrough 

insulators instead of 5-way binding posts. 

MFJ-1706 back MFJ-1706H back 

MFJ . . . the World Leader in Amateur Radio Accessories! 25

MFJ Wideband Dry Dummy Load & Antenna Switches 

MFJ 3GHZ, 300 Watt Dry Dummy Load 


$ 99 95 

Ship Code B 

MFJ-263 wideband dry dummy load uses a specially 

designed metal-film non-inductive terminating resistor to cover a 

very wide frequency range from DC to 3 GHz. 

That also produces an incredibly low and flat SWR across the 

entire spectrum. 

MFJ-263 handles a full 300 Watts for 10 seconds and handles 

125 Watts continuously, making it an excellent for gear testing. 

Filters and reduces 

AC power line RFI, 

hash, noise, transients, 

surges generated by computers, motors, RF transmitters, 

static/lightning by 30 db and up to 60-80 dB with a good earth 

ground. Super fast, nano-second overvoltage protection. 

Provides inductive isolation, capacitive decoupling, RFI rejection, 

overvoltage protection of both common mode and differential 

signals. Rejects/shunts undesired signals to ground. Four 3-wire, 

15 Amp, 120 VAC outlets spaced for large adapters. 25 Amps/3000 

Watts maximum. Fused, has 51 /2 ft. cord, wing nut for ground. 

Mounting holes. Aluminum case is 12Wx31 MFJ-1164B 

$ 95 79 

Ship Code B 

/2Hx2D in. 

MFJ Transceiver Surge Protector 


Protects your expensive transceiver/equipment 

from damaging power surges. 

Capacitive decoupling and ultra-fast 120 

VAC/25A/3000 Watt MOVs protection. Four 3-prong 

grounded AC outlets. 

A high-quality Teflon (R) insulated 

N-type connector is used to insure 

the absolute minimum SWR. 

The custom heavy-duty finned 

heatsink spans the entire length of 

the cabinet and keeps operation safe 

and cool. 

Strong, lightweight, all-aluminum 

construction is super-durable and 

will give years of continuous testing 

service. 

A derating curve is permanently 

26 MFJ...the world leader in ham radio accessories 

DERATING CURVE 

1 2 3 4 5 6 7 8 9 10 

MINUTES 

silk-screened into the bottom chassis for quick and easy reference. 

See above right. 

Measures 10 3 /4W x2 1 /4Hx5 1 /4D inches. Weighs just 3.5 pounds. 

MFJ-263 is protected by MFJ’s famous one year No Matter 

What TM limited warranty. MFJ will repair or replace (at our option) 

your dummy load for one full year from your purchase date. 

MFJ Dry “Handy” Dummy Loads . . . DC-3 GHz or DC-500 MHz 

MFJ 3 GHz, 35 Watts Dummy Load Dry DC-500 MHz Dummy Load 

The MFJ-262BN 

heart of $ 95 69 

these 50 With N male 

Ohm dry DC to 3 GHz 

dummy Ship Code A 

loads are 

the resistor 

inside. 

They are made 

with copper flanges 

and beo ceramic for 

incredible lowest thermal resistance and 

WATTS 

200 

175 

150 

125 

100 

75 

50 

45 

35 

DERATING CURVE 

5 6 7 8 9 10 15 20 30 35 

SECONDS 

New! 


$ 59 95 

With PL-259 DC to 1 

GHz 

Ship Code A 

capacitance. 

Frequency ranges from DC to 3 

GHz on MFJ-262BN (N male connector) 

with an SWR of less than 

1.2:1. DC to 1 GHz with SO-239 

connector. 

Handles up to 200 Watts for 5 

seconds and 35 Watts continuously. 

MFJ Handy 3 GHz Dry Dummy 

Loads have a built-in male connector. 

Choose between MFJ-262B, 

$59.95, PL-259 or MFJ-262BN, 

MFJ AC Line RFI Filter DC Power Injectors 

WATTS 

300 

275 

250 

225 

200 

175 

150 

125 

100 

Connects directly to your transmitter 

or test equipment with a PL- 

259 connector. 

Great for use with your MFJ- 

259B Antenna SWR AnalyzerTM . 

Use MFJ-261N, $37.95 for use with your 

MFJ-269 SWR AnalyzerTM . 

No patch cable used, reduces SWR. 

Finned aluminum, air-cooled heatsink. 

Handles 100 Watts peak, 15 Watts average. 50 

Ohms. 

Covers DC to 500 MHz with less than 1.15:1 

SWR. 15 MFJ-261 

$ 95 27 

With PL-259 

DC to 500 MHz 

Ship Code A 

/8 round by 3” long. 

MFJ-261N, $37.95 Similar to MFJ-261, but 

has N-male type connector. 

Continued from left . . . 

$69.95, Type N connector for direct connection to your transmitter. 

A heavy duty, black, finned aluminum construction and aircooled 

heatsink will give you years of dependable use. 

MFJ-262B and MFJ-262BN measures a super-compact 


HF, VHF and UHF BiasTee 

Send up to 1 Amp DC/50 Volts 

DC through coax cable to power 

your electronic equipment. 

Use with your automatic antenna 

tuner, remote antenna switch, 

antenna relay box, etc. without running 

separate cables. 

Requires one MFJ-4116 on each end of coax to inject DC 

power and to retrieve DC power. 

MFJ-4116 covers all HF bands and Six Meters, 1-60 MHz. 

MFJ-4119 covers HF, VHF and UHF. Both have SO-239 connectors. 

Measures a super-compact 23/4Wx21/2Hx11/4D inches. 

MFJ-4116P, $47.95, pair of MFJ-4116. 

MFJ-4117 

$ 95 29 

Ship Code A 


$ 24 95 

1-60 MHz 

Ship Code A 


$ 34 95 

1-440 MHz 

+12 OFF -12V 


MFJ-4117, $29.95. 

Like MFJ-4116, but with 

switch to turn remote equipment 

on/off. 


Like MFJ-4116, but provides 

both +12VDC and - 

12VDC. Has three switched 


$ 95 39 position settings: +12VDC, OFF 

Ship Code A and -12VDC.

MFJ UHF/VHF/HF Dummy Loads 

MFJ VersaLoad TM kW Dummy Load 


VersaLoad TM KW 

dummy load lets you 

tune up fast! Run 1KW 

CW or 2 KW PEP for 

10 minutes. 

Run 1/2 KW CW 

or 1 KW PEP for 20 

minutes. Run continuous 

duty with 200 


$ 49 95 

Ship Code A 

Watts CW or 400 W 

PEP. Complete with derating 

curve. Quality 50 ohm noninductive 

resistor. 

Use transformer oil (not included). Low 

VSWR to 400 MHz. Under 1.2:1 to 30 

MHz. 1.5:1 for 30-300 MHz. 2:1 for 300- 

400 MHz. SO-239 connector and vented 

for safety. Removable vent cap. Carrying 

handle. 7 1 /2 inches. high by 6 5 /8 diameter. 

MFJ-250, $69.95. Includes transformer 

oil (no PCB). Ship Code D. 

Industrial Grade Transformer Oil 

MFJ-21, $29.95. 1 gal. industrial grade 

transformer oil, (no PCB). Ship Code C. 

Dry 1.5 kW UHF/VHF/HF Load 

This is ham 

radio’s most 

versatile 50 

ohm dummy 

load. 

Works with 

all radios from 

160 Meters to 

650 MHz and 

from QRP to 

the full 1500 

watt legal limit. 

SWR below 1.3 to 650 

MHz and below 1.1 at 30 MHz. 

Handles 100 watts for 10 minutes, 

1500 Watts for 10 seconds. 


$ 74 95 

Ship Code A 

Strong lightweight aluminum construction. 

Compact 3Wx3H x9D inches. 

Has MFJ’s famous No Matter What TM 

one year limited warranty. 

MFJ-264N, $84.95. Similar to MFJ- 

264 but with type “N” connector. 

Coax Patch Cable 

MFJ-5803, $5.95. 3 foot coaxial line 

with PL-259 connectors. Shipping code A 

Dry 300 Watt VHF/HF Dummy Load 

Air cooled, 

non-inductive 

resistor is housed 

in a perforated 

metal housing. 

Has SO-239 

connector. Full 

load for 30 seconds.Silkscreened 

derating curve to 5 

minutes. 

Handles 300 Watts. SWR 

below 1.1:1 to 30 MHz, 1.5:1 from 30 to 

650 MHz. A super compact 21 /4x21 MFJ-260C 

$ 95 39 

Ship Code A 

/4x7 

inches. 

MFJ-260CN, $49.95. Similar to MFJ- 

260C but with type “N” connector. 

Coax Patch Cables 

MFJ-5803, $5.95. 3-foot RG-58 coaxial 

line with PL-259 connectors. 

MFJ-5806, $9.95. 6-foot RG-58 coax. 

MFJ-5809, $11.95. 9-foot RG-58 coax. 

Also available in RG-8X and RG-213. 

See page 9 for more details. 

MFJ Dry Dummy Load with Precision SWR/Wattmeter 


$ 159 95 

World’s most versatile 1.5 

kW dummy load has a built-in 

true peak reading 

Ship Code B 

SWR/Wattmeter that you can 

switch and use independently! 

You’ll find tons of uses! 

Tune up your transceiver, linear amplifier 

or antenna tuner into a safe 50 Ohm 

dummy load at full power. 

Then instantly switch to your antenna 

and monitor SWR, forward and reflected 

power. 

Use for testing/tuning transmitters, 

transceivers, amplifiers, tuners, baluns, 

transformers, filters, matching networks, 

coax, stubs, transmission lines & antennas. 

1500Watt Dry Dummy Load 

The 50-Ohm dry dummy load works 

DC to 60 MHz. 

SWR is below 1.3:1 at 30 MHz. Can 

handle 100 Watts for ten minutes or 1500 

Watts for ten seconds. Comes with power 

derating curve. 

Cross-Needle SWR/Wattmeter 

Extra-large three-inch lighted Cross- 

Needle meter reads SWR (1:1 to 8:1), forward 

and reflected power simultaneously. 

Reads true peak PEP or average power 

on 300/3000 Watts forward and 60/600 

Watts reflected power ranges 1.8-54 MHz. 

High accuracy comes from a carefully 

designed directional coupler, an accurate 

active-peak reading circuit and a precision 

d’Arsonval meter movement. 

RF tight perforated aluminum cabinet. 

4 1 /2Wx3 1 /2Hx10 1 /2D inches. Uses 12 VDC 


MFJ NoMatterWhat TM Warranty 

MFJ-267 is protected by MFJ’s famous 

No Matter What TM one year limited warranty. 

MFJ will repair or replace your MFJ- 

267 dummy load no matter what for one 

full year. 

MFJ 2500 Watts fan-cooled Dry Dummy Load 


2500Watts fan-cooled Dry Load 

MFJ-265 MFJ’s 2500 Watt fan cooled 

$ 95 dummy load handles any legal 

219 limit amplifier, and lets you tune- 

Ship Code C up your expensive amplifier fast 

and super easy. 

Works with all amplifiers, 

transceivers and transmitters from 

DC through 6 Meters. 

It can dissipate 2500 Watts 

average power for one minute on, 

ten minutes off. 

Handles 300 Watts continuous. 

SWR is less than 1.25 to 1 

below 30 MHz and less than 1.4 

from 30 to 60 MHz. 

Four 50 Ohm non-inductive 

super high energy density resistors 

are used. 

Each has an incredibly high 

energy density of 7000 joules per 

cubic inch per second with a voltage gradient 

of 10 kV per inch! 

Detailed specifications and power curve 

are permanently silk-screened on the 

bronzed cabinet for easy reference. 

Uses 12 VDC or 110 VAC. 

Measures 81 /4Wx4Hx 91 /2D inches. Has 

quality SO-239 connectors. 

Weighs just 5 pounds. 

Maximum Transmit Time 

POWER 

(Watts) 

60 70 80 90 100 150 200 600 

TIME (Seconds) 

MFJ . . . The World Leader in Ham Radio Accessories! 27 

3000 

2500 

2000 

1500 

1000 

500 

250

Safeguard expensive gear from static electricity and lightning surges 

MFJ Lightning Surge Protectors handle 400 Watts PEP or 1500 Watts PEP 

400Watts! 

Safeguard 

your expensiveequipment 

from 

static electricity 

and lightning induced surges on 50 Ohm 

coaxial line. 

MFJ’s Guardian AngelTM Ship Code A 

Lightning 

Surge Protectors has an Ultra-fast gas dis- 

Reduce Harmonics, Avoid TVI with MFJ Filters 

Low Pass TVI Filter Handles Full Legal Power 


$ 95 59 

Ship Code A 

MFJ-704 suppresses 

TVI, RFI, telephone 

and other interference 

by reducing 

unwanted harmonics 

going to your antenna. 

At the same time your HF signal passes 

on through with low loss so you can snag 

that rare and exciting DX! 

If your harmonics are causing TVI 

problems, an MFJ-704 can keep your 

neighbors happy while you have fun with 


$ 139 95 

Ship Code B 

Suppress 

TV interference 

at the source with the MFJ-705 Low 

Pass Filter. Use between Transmitter and 

Antenna or Tuner. Reduces TV interference 

(TVI) radiated by transmitters operat- 


(Set of 4) 

$ 24 95 

Ship Code A 


$ 19 95 

charge tube that safely shunts up to 5000 

amps of peak impulse current harmlessly to 

an independent ground. SWR less than 1.1:1. 

Less than 0.1 dB loss. Use up to 1000 MHz. 

MFJ-270 handles 400 W PEP. MFJ-272 

handles 1.5 kW PEP. MFJ-270 and MFJ-272 

do not protect against a direct lightning hit. 

MFJ-270, $19.95. SO-239 to SO-239. 

MFJ-270MF, $27.95. SO-239 to PL-259. 

MFJ-270N, $27.95. Low-loss N-connectors. 

MFJ-97, $7.95. Replacement gas discharge 

tube for MFJ-270. 

ham radio! 

Nine Chebyshev poles, MFJ’s exclusive 

TeflonDielectric Technology TM capacitors, 

Hi-Q inductors, ground plane shielding and 

an RF tight cabinet give you excellent TVI 

and RFI protection. 

These exclusive Teflon Dielectric 

Technology TM capacitors give you extremely 

low loss and eliminate voltage breakdown 

and capacitor heating -- even at full 

1500 Watts with a 2:1 SWR load! 

Handles full legal power from 1.8-30 

MHz. SWR below 1.3 to 30 MHz into 50 

Ohms. Attenuates above 40 MHz. 

Measures a compact 3x3x9 inches. 

Handy mounting tabs. 

MFJ 2500 Watts Low Pass TVI Filter 

It’s easy to eliminate 

common RFI 

problems. Simply 

wind the offending cable around MFJ’s RFI 

suppressing toroid to get rid of RFI. Four 

square ferrite toroids are formulated espe- 

ing below 30 MHz. Suppresses harmonics 

appearing in the TV bands. Additional attenuation 

to TV IF frequencies above 40 MHz. 

Low loss to 30 MHz. 9-pole inverse Chebyshev. 

SPECIFICATIONS: 

Passband: 0-30 MHz 

Cutoff freq: 35 MHz 

Attenuation: 52.25 MHz (Channel 2 

Video), -60 dB, Worst case at 65 MHz, -60 dB 

Power Capacity: 2500 W Key Down - 

cially for eliminating RFI from 0.5 to 200 

MHz. Wind on all kinds of cable, computer 

ribbon, TV coax, power, telephone, etc. 



$ 29 95 

Ship Code A 


$29.95. 

SO-239- 

SO-239. 

MFJ-272N, $34.95. N 

Connectors. 

MFJ-272MF, $34.95. SO-239 to PL-259. 

MFJ-97H, $17.95. Replacement Gas 

Discharge tube for MFJ-272. 

200W Low Pass TVI Filter 


$ 95 34 

Ship Code A 

Be a good 

neighbor. 

Plug this 

Low Pass TVI filter be-tween your transmitter 

and antenna or tuner and reduce your 

transmitter harmonics by 50 dB! Harmonics 

could be the source of interference to your 

neighbor’s TV, radio, VCR, telephone, etc. 

SWR is below 1.5 to 30 MHz into 50 Ohms. 

Perfect for barefoot transceivers -- handles 

200 Watts with less than 0.5 dB insertion 

loss. Attenuation is 50 dB at 54 MHz. SO- 

239 connectors. 3x2x1.5 inches. 

50% Duty 

Impedance: 

52 Ohms 

Insertion 

Loss: 0.25 

dB @ 30 

MHz. 

Size: 9 1 /2Wx 

2 1 /4Hx4 1 /4D 


1.5kWatts 

MFJ RFI Free Choke Kit for RFI Suppression High Pass Filter for TV sets 

Ferrite RFI Suppression Chokes 

These RFI snap-on Chokes are selected for RFI suppression. Install on DC power line to 

keep ignition noise from your mobile rig and amplifier. Remove RF on cables and wires to 

your radio station. Isolate RFI on feedline from your station. Two-piece design, snap and 

lock securely around your cable. Install end to end along rigid cable or loop multiple turns 

with smaller soft cable. Select from four sizes, .25” ID to .75” ID. 

Model # - Price each 

MFJ-700A, $2.75 

MFJ-700B, $3.50 

MFJ-700C, $4.95 

MFJ-700D, $5.95 

MFJ-700P9, $32.95 

Model# - Price 4-Pk 

MFJ-700A4, $10.95 

MFJ-700B4, $13.95 

MFJ-700C4, $18.95 

MFJ-700D4, $22.95 

Combination Pack of 9; 

Hole Size Typical Cable Use 

.275 inches diameter RG58/59/6U/8X 

.402 inches diameter RG213/6X 

.528 inches diameter RG11/8U 

.750 inches diameter LMR600 

consists of 4-A, 2-B, 2-C and 1-D RFI chokes. 

MFJ-711B, 

$29.95. MFJ’s 

ShieldBreaker TM 

high pass filter 

effectively suppresses annoying 

TVI! Wipe out TVI caused by 2way, 

broadcast, commercial, amat- 

MFJ-272MF 

pictured. 

MFJ-705 Frequency Response 

ATTENUATION (dB) 

0 

10 

20 

30 

40 

50 

60 

0 10 20 30 40 50 60 70 80 

FREQUENCY (MHz) 


$ 29 95 

Ship Code A 

eur and CB radios operating below 30 MHz. 

Use between cable/antenna and TV/VCR. 75 

ohm cable.Type F male/female connectors. 

Ferrite RFI 

Suppression 

Chokes

MFJ High Current DC Multi-Outlet Strips 

Choose super heavy-duty 5-way binding posts AND/OR Anderson PowerPole® connectors 

Provide multiple high current DC outlets for transceivers and accessories from your transceiver’s main DC 

power supply – keeps you neat, organized and safe. Prevents fire hazards. Keeps wires from tangling up and 

shorting out. Outlets are fused/switched/RF bypassed. 


$ 95 84 

Ship Code A 


$ 95 59 

Ship Code A 


$ 95 44 

Ship Code A 


$ 95 64 

Ship Code A 

MFJ DC Multi-Outlets with Anderson PowerPole ® Anderson PowerPole® is a registered 

connectors trademark of Anderson Power Products. 

Genderless, polarized and color coded connectors conform to ARES & RACES emergency 12V connector standard 

PowerPoles ® AND 5-Way Binding Posts 

Each Anderson PowerPole® outlet can 

carry up to 40 amps. You can fuse each 

outlet as needed to protect your accessories 

or transceiver. The main fuse is 40 amps. 

The standard color coded fuses simply 

plug in from outside. They are widely 

available ATC/ATO automobile fuses and 

can be used for 6, 12, 24 VDC systems. 

The heavy duty DC input cable is builtin 

– you don’t have to pay extra just to use 

it! It’s a high-current carrying capacity 

eight gauge, flexible, stranded, six foot 

(can be shorten) cable with 5/16 ring terminals. 

It’s color coded Red and Black. 

Extra Anderson PowerPole® connectors, 

contacts and fuses are included at no extra 

cost, unlike lesser competitive products. 

A massive 0.062 inch thick double sided 

plated through PC board with wide traces is 

used. The current path has an equivalent 

current carrying capacity of an enormous 4 

ounce trace. 

RF-tight aluminum cabinet has mounting 

ears and ground post with wing nut. 

MFJ 6-Way Desk-Top DC 

Power Distribution Unit 

Convenient planar design optimizes DC 

distribution on your desk or workbench 


$ 29 95 

Ship Code A 

MFJ DC Multi-Outlets with versatile 5-way binding posts 


is an inexpensive, 

compact, 

and low profile DC distribution 

platform designed 

for your operating 

desk/workbench. 

It contains seven Anderson Power Pole TM 

connectors all connected in parallel, permitting 

one DC input to be shared by six DC 

outputs. 

Includes seven sets of mating connectors 

for your cables. Any connector may be used 

as an input or output, and the total current 

carrying capability is 30-amps. 

Unit measures 2 1 /4Wx1Hx3 3 /4D inches, 

not including the PowerPole TM connectors 

sticking out on three sides. 

MFJ-1118, $84.95. Lets 

you power two HF and/or VHF 

rigs and six or more accessories 

from your transceiver’s 

main 12 VDC supply. Two 

pairs of super heavy duty 35 

amp 5-way binding posts connect 

your transceivers. Each 

pair is fused and RF bypassed. 

Handles 35 Amps total.Six 

pairs of heavy duty, RF 

bypassed 5-way binding posts 

let you power your accessories. They handle 

15 Amps total, are protected by a master fuse 

and have an ON/OFF switch with “ON” LED 


$ 104 95 

Ship Code B 

All PowerPoles ® 

MFJ-1128, $104.95. 12 outlets. 

Factory installed fuses: 

three 1A, four 5A, four 10A, 

one 25A, one 40A. Built-in 

0-25 VDC Voltmeter. ON/OFF switch controls 

outlet 4 through 12, handles 20 Amps 

total. Outlet 1, 2 and 3 are unswitched, 

handle 40 amps total. Includes 12 pair of 

Anderson PowerPole ® 24 35A contacts, 10 

fuses (2 each: 1,5,10,25,40A). 

12Wx1 1 /4Hx2 3 /4D inches. 

MFJ-1126, $84.95. 8 outlets. 

Factory installed fuses: two 

1A, three 5A, two 10A, one 

25A, one 40A. Includes 6 pair 

of Anderson PowerPole ® 12 35A contacts 

and 5 fuses: (1 ea. 1,5,10,25,40). 

9Wx11 /4Hx23 MFJ-1126 

$ 95 84 

Ship Code B 


MFJ DC Line RFI 

Filtered Outlet 

The 


1142 is a 

compact, 


$ 59 95 

Ship Code A 

filtered DC outlet. It 

connects between 

your transceiver and 

DC power supply. 

It reduces RFI, hash, noise transients, 

noise generated by motors, alternators or 

fuel pump whine, power windows, other 

motors and RF transmitters. For 12V or 

24V DC power source. Has both heavyduty 

5-way binding posts and Anderson 

PowerPoles (R) for input and output 

connections. 3Wx2 3 /4Hx4 3 /4D inches. 

www.mfjenterprises.com • Toll-free 1-800-647-1800 

light. Built-in 0-25 VDC voltmeter. Six feet 

super heavy duty eight gauge color-coded 

cable with ring tongue terminals. Binding 

posts are spaced for standard dual banana 

plugs. Heavy duty aluminum construction. 

12 1 /2x2 3 /4x2 1 /2 inches. 

MFJ-1117, $64.95. For powering four 

HF/VHF radios (two at 35 Amps each and 

two at 35 Amps combined) simultaneously. 

Tiny 8x2x3 inches. 

MFJ-1116, $59.95. Similar to MFJ-1118. 

No 35 amp posts. Has “ON” LED and 0-25 

VDC voltmeter. 15 amps total. 

MFJ-1112, $44.95. Similar to MFJ-1116. 

No on/off switch, LED, meter, fuse. 

MFJ-1129 MFJ-1129, $114.95. Get 

$ 95 the best of both connectors! 

114 

Ship Code B 10 outlets. Installed fuses: 

two 1A, three 5A, three 10A, 

two 25A, one 40A. Outlets 1, 2, 4-8 are 

Anderson PowerPole ® . Outlet 3 is a 35A 

high current binding post; outlet 9, 10 are 

15A binding posts. Built-in 0-25 VDC 

Voltmeter. ON/OFF switch for outlets 4-10, 

20 amps total. Outlets 1, 2, 3 unswitched, 

handle 40 amps total. Includes 7 pairs of 

PowerPole ® 14 35A contacts, 10 fuses (2 

ea, 1,5,10,25,40). 12 1 /2Wx1 1 /4Hx2 3 /4D in. 


$ 95 64 

Ship Code B 

Anderson PowerPole ® with 35A contacts 

MFJ-11C06, $6.95, 6 pairs. 



MFJ-11C100, $99.95, 100 prs. 

MFJ-7602, $16.95. Tool for 

crimping Power-Poles ® MFJ-1124, $64.95. 6 outlets. Installed fuses: 

one 1A, one 5A, two 10A, two 25A, one 40A. 

Outlets 1-4 are PowerPole 

. 

Banana Plugs for binding posts 

A. MFJ-7713, $5.95. 1 red, 1 black high 

current banana plug. Solderless, thumb 

Screw. Fits 10 to 12 gauge wire. 

B. MFJ-7709, $6.95. High current 

dual banana plug, Black/Red polarity 

rings. Solderless, thumb screw. .75” 

standard spacing -- fit MFJ outlets 

and others with 10-12 gauge wire. 

C. MFJ-7700P, $6.95. Six red and six 

black solderless banana plugs. 

MFJ-11F20, $9.95. 10 ATO Fuse 

pack. 2 each: 1, 5, 10,25,40 amp. 

® . Outlets 5, 6 are 

35A high current binding posts. Includes 4 

pair PowerPole ® 8 35A contacts, 5 fuses 

(1ea, 1,5,10,25,10) 8Wx11 /4Hx23 /4D inches. 

A 

B 

C 

29

MFJ-4416B Super Battery Booster 

Keeps your transceiver operating at full efficiency and performance by 

eliminating low or marginal voltages in the mobile environment . . . 

MFJ-4416B 

$ 149 95 

Ship Code A 

Today's compact 100watt 

HF transceivers are 

designed to oper-ate from 

about 12-16 volts, with out- 

put signal distortion, output power problems, 

and transceiver reset often occurring 

when voltage drops below 12 volts. 

In the mobile environment, low voltage 

is caused in two ways: 

First - even low resistance DC wiring 

can result in a noticeable voltage drop. For 

a 100-watt transceiver with a 20-amp typical 

current requirement, just 1/10th of an 

ohm resistance in your DC cable and connectors 

results in a 2-volt drop! 

And second - when you turn your car 

off, the battery voltage drops from around 

13.8 volts to close to 12 volts after a short 

period of time. If you couple this with any 

voltage drop in the cables, you suddenly 

have a problem. 

MFJ’s Super Battery Booster eliminates 

low voltage problems by boosting input 

voltages as low as 9 volts up to the desired 

13.8 volts at up to 25 amps peak with a typical 

efficiency of close to 90%. 

It is compact at just 7 3 /4Wx4Hx2 1 /8D” 

and lightweight at 1.3 lbs. And the MFJ- 

4416B Super Battery Booster is designed to 

be rugged, reliable, and easy to use. 

MFJ-4416B includes Anderson 

PowerPole TM connectors and high-current 

5-way binding posts for both the DC input 

and regulated output. An internal 30-amp 

input fuse protects the unit from excess output 

current demands. 

There are also selectable limits on the 

MFJ-4403 Transceiver Voltage Conditioner 

Protects against: reverse voltage, over-voltage, voltage transient, short circuits. Super noise and 

ripple filtering & power supply buffering. 100W SSB from your auto cigarette lighter socket ! 

MFJ-4403 MFJ-4403 Transceiver 

$ 95 Voltage Con-ditioner pro- 

119 vides reverse voltage, over- 

Ship Code A 

voltage, voltage transient 

and short circuit protection. 

MFJ-4403 gives superb noise and ripple 

minimum voltage that the unit will accept: 

9-volts, 10-volts (default), and 11-volts. 

This protects you from over-discharging a 

battery and possibly damaging it. Also 

includes output over-voltage crow-bar protection 

should regulation be lost. 

Two additional features offer ways to 

increase efficiency even more! 

First, there is an RF sampling port 

which can be connected to your transceiver's 

transmission line with an MFJ-7733, 

$6.95 UHF-T connector. 

When this feature is enabled, the MFJ- 

4416B is bypassed unless RF is sensed so 

no regulator switching efficiency penalties 

are incurred during receive. 

The second efficiency enhancement feature 

is a user-adjustable output voltage control 

which lets you set the output voltage 

anywhere between 12- and 13.8-volts. 

When setting the output at 12-volts, 

input voltages greater than 12V will pass 

through, but the efficiency of the regulator 

is higher. And lower input voltage means 

your transceiver will run cooler! 

MFJ-4402 New! 

$ 95 79 

Ship Code A MFJ-4402 

protects your 

mobile rig from many 

unseen operating problems 

found in vehicles 

today. 

A built-in surge protection 

diode reduces the 

chance a high voltage spike will damage 

your rig due to an alternator failure or 

jumping off from other vehicles, and it has 

reverse polarity protection. 

Sagging voltages on your vehicle start-up 

can cause your radio to not power up correctly, 

to lose memory channels and possibly 

corrupting your service and set-up 

menus in your transceiver. 

filtering and power supply buffering for 

your base, portable or mobile transceiver. 

The MFJ-4403 really shines in mobile and 

portable operation where your non-ideal 

voltage source could cause extensive damage. 

If you accidentally reverse your voltage 

connection, the MFJ-4403 protects your 

transceiver against instant destruction and 

alerts you with a bright warning LED. 

Once the DC polarity is corrected, the 

MFJ-4403 recovers and operates normally. 

Heavy-duty transient suppressor handles 

peak currents up to 200 Amps -- protects your 

transceiver from vehicle and poorly regulated 

power supply start-up voltage spikes. 

MFJ brings high-end automotive audio 

technology to ham radio! 


Typically save over 30 watts in heat dissipation 

during transmit, and even 3-4 watts 

during receive. So it can actually be good to 

let the voltage sag to 12V, then let MFJ- 

4116B protect from lower voltages. 

Battery Booster Remote Control 

MFJ-4416BRC 

$ 95 79 

Ship Code A 

The MFJ- 

4416BRC gives 

you full remote 

control capability 

of your MFJ-4416B Super Battery Booster 

plus it allows you to monitor battery voltage 

and battery booster output voltage. You 

can place the battery booster near your battery 

or other convenient location. 

MFJ-4416BRC lets you turn booster and 

has a low battery alert on/off. Front panel 

also features boosting and low battery 

LEDs. Four mounting holes make it easy to 

install. Just plug in Cat-5 cable to connect 

to battery booster. 5Wx2Dx3H inches. 

Mobile Transceiver Protector 

When your vehicle is shut off there are 

still many circuits that could have power on 

them, so issues like distorted audio, frequency 

shifting with modulation or no vehicle 

start-up can happen. 

MFJ-4402 will cut your rig off if the 

voltage gets too low for proper vehicle 

operation. 

A delay timer, which is controlled off of 

the ignition sense line insures that your rig 

doesn’t turn on until the vehicle starts up 

and a normal voltage is reached. 

MFJ-4402 connects to your rig with 

Anderson PowerPoles TM for high-current 

lines and a bayonet lug to the ignition sense 

line. A 30A (maximum) fuse protects for 

over-current or reverse voltages. 

Compact 2 7 /8Wx4Hx1 1 /2 inches fits nicely 

into your vehicle installation. 

Four Farads of ultra high-value capacitors 

filters off virtually all power supply 

noise and ripple, and provides enough 

power supply buffering so that even underrated 

and marginal power supplies will run 

your HF transceiver. 

For temporary mobile operation -- rental 

car, weekend trips, vacations, etc. -- the 

ultra high-value capacitors in the MFJ- 

4403 provide enough power supply buffering 

to let you run full 100 Watts SSB from 

your 10-15 Amp cigarette lighter socket. 

Standard Anderson Powerpole TM connectors 

are used for the DC input and output. 

Compact 4Wx3Hx2D inches.

MightyLiteTM 30A Meter Switching Power Supply 

Super-Compact 5Wx21 /2Hx6D” with meter, adjustable voltage 

New! 

MFJ-4230MV 

This is the world’s most compact switching 

power supply that also has a meter and 

adjustable voltage control. 

Just 5Wx21 Ship Code B 

/2H x6D inches, it weighs only 

3 lbs. -- it is the perfect pack-n-go power 

supply for field day, DXpeditions, camping, 

hiking or to pack for your next business trip 

or vacation to some far away place. 

MFJ-4230MV gives you 25 Amps continuously 

or 30 Amps surge at 13.8 VDC. The 

voltage is front-panel adjustable from 4 to 16 


$ 95 84 

Ship Code B 

MFJ-4128 can power your HF, VHF, or 

UHF mobile or base transceiver with an output 

of 28 Amps maximum and 25 Amps 

continuously at 13.8 VDC. 

This basic power supply has all of the 

output connectors you will ever need! 

MFJ-4128 has five way binding posts for 

HF Power Cords 


$ 89 95 

A. MFJ-5535, $14.95. Replaces HF radio 

power cord at a fraction of the original cost. 

Two super-flex, 12 gauge, multi-strand, soft 

wires 8’ length. Two in-line fuses/holders. 

Keyed plug prevents reverse polarity. For 8pin 

type Yaesu, Icom, Kenwood, others. 

B. MFJ-5535M, $19.95. Same as MFJ- 

5535 but with Anderson PowerPoles ® . 

C. MFJ-5535C, $19.95. Same as MFJ- 

5535 HF power cord but has cigarette lighter 

plug. No fuse/holder. 

D. MFJ-5538, $19.95. Heavy duty replacement 

power cable for IC-7000, Kenwood TS- 

480, and compatibles. Keyed plug prevents 

reverse polarity. 4-pin, 9 foot,12 gauge, 

red/black flex cord, inline fuses/holders. 

E. MFJ-5538M, $24.95. Same as MFJ-5538 

but with Anderson Powerpoles TM . 

F. MFJ-5538C, $19.95. Same as MFJ-5538 

but with Cigarette lighter plug. 

1. 2. 3. 4. 

Volts. MFJ-4230MV has a selectable input 

voltage: choose 120 or 240 VAC at 47-63 Hz. 

A simple front-panel push-button switch 

lets you choose either Ampmeter or 

Voltmeter -- allows you to select Amps or 

Volts as you wish to read them. 

MFJ-4230MV has an excellent 75% efficiency 

and extra low ripple and noise, 55 dB 

50 Ohms 

HF/VHF/UHF/1.2 GHz 

200/500/800 Watt 

Triplexers 

Use HF, 6M, 2M, 440 MHz and 1.2 GHz 

antennas with a transceiver without a builtin 

triplexer. Or use 3 different transceivers 

with one HF/VHF/UHF/1.2 GHZ antenna. 

Heavy-duty diecast enclosure houses low 

pass networks that separate/combine HF/ 

6M, 144/440 MHz and 1.2 GHz signals. 

Ports are 50 Ohms, units handle 200, 500 

and 800 Watts PEP. MFJ-4926S has SO- 

239 connectors and handles 800 Watts. 

MFJ-4926C has 12” coaxial PL-259 pigtails. 

MFJ-4936S has SO-239 connectors 

and handles 500 Watts. MFJ-4946SN has 

both type N and SO-239 connectors. 

Price 

Freq (MHz) 

Output Con 

Output Con 

Output Con 

Input Con 

Power (W) 

Insertion Loss 

VSWR 

Isolation 

Impedance 

MFJ-4926S 


$59.95 

1.6-60 

110-170 

350-570 

SO-239 

SO-239 

SO-239 

N Female 

800/500/500 

.20/.20/.20 dB 

< 1.2 

> 55 dB 

50 Ohms 

New! 


$69.95 

1.6-60 

110-170 

350-570 

Pigtail PL259 

Pigtail PL259 

Pigtail PL259 

SO-239 

800/500/500 

.20/.20/.20 dB 

< 1.2 

> 55 dB 

50 Ohms 


$59.95 

1.6-150 

220-225 

400-550 

SO-239 

SO-239 

SO-239 

SO-239 

500/500/500 

.23/.23/.30 dB 

< 1.2 

> 55 dB 

50 Ohms 

MFJ4946SN 

$69.95 

1.6-160 

350-550 

850-1300 

SO-239 

SO-239 

N-Female 

N-Female 

800/500/200 

.20/.30/.34 dB 

< 1.2 

> 55 dB 

50 Ohms 


COMMON 

TRIPLEXER 

1.6-60 140-150 400-540 


$ 59 95 

Ship Code A 

MFJ-916BN 

$29.95 

1.6-225 

350-540 

N-Female 

N-Female 

N-Female 

MFJ-916BC 

$ 49 95 

Ship Code A 

200 

.20 dB 

< 1.2 

> 55 dB 

50 Ohms 


$49.95 

1.6-225 

350-540 

Pigtail/259 

Pigtail/259 

SO-239 

200 

.20 dB 

< 1.2 

> 55 dB 

50 Ohms 


$ 69 95 

Ship Code A 


$59.95 

1.6-56 

140-170 

SO-239 

SO-239 

SO-239 

600 

.20 dB 

< 1.2 

> 55 dB 

50 Ohms 


New! 


$59.95 

1.6-30 

50-54 

SO-239 

SO-239 

SO-239 

600 

.20 dB 

55 dB 

50 Ohms 


COMMON 

TRIPLEXER 

1.6-60 140-150 400-540 


$34.95 

1.3-60 

130-540 

SO-239 

SO-239 

SO-239 

500/300 

.20 dB 

60 dB 

50 Ohms

MFJ 75 Amp Switching Power Supply 

Power your HF Mobile Amplifier or your HF and VHF/UHF transceivers from one power supply! 

Features MFJ’s exclusive HashSQUELCH TM RF Filtering System -- eliminates RF hash that 

plagues other manufacturer’s switching power supplies . . . lightweight (just 10.5 lbs) . . . 

MFJ’s heavy duty 75 Amp switching 

power supply is excellent for powering your 

HF mobile amplifier or your HF and 

VHF/UHF rigs and accessories. 

It’s great for Ameritron’s ALS-500M 

Solid State Mobile HF Amplifier and others 

with a power requirement of up to 75 Amps. 

MFJ-4275MV delivers 75 amps maximum 

and 70 amps continuously without even 

MFJ-4235MV can power your HF or 

VHF/UHF mobile or base transceiver with 

an output of 30 Amps continuous and 35A 

surge. You can vary the voltage from 4.0 to 

16 Volts with 1% voltage regulation. MFJ- 

4235MV features less than 9 mV peak-topeak 

ripple at the rated load. 

MFJ’s Exclusive Hash-SQUASH TM 

Filtering system eliminates RF hash that 

plagues other manufacturer’s switching power 

supplies. MFJ-4235MV has no RF hash in 

the ham bands! 

It features switchable AC input from 90 

to 125 or 200 to 240 Volts. It has an easy-toreplace 

external replaceable fuse. 

MFJ-4235MV is fully protected with 

MFJ’s heavy duty power supply is excellent 

for powering your rig/accessories. 

A massive 19.2 pound transformer makes 

this power supply super heavy duty! It 

delivers 35 amps maximum and 30 amps 

continuous without even flexing its muscles. 

Plugs into any 110 VAC wall outlet. 

It’s highly regulated with load regulation 

better than 1%. Ripple voltage is less than 1 

MV. No RF hash! Fully protected -- has 

over voltage, fold back short circuit and 

over-temperature protection systems. 

You get front panel adjustable voltage 

from 1 to 14 VDC with a convenient detent 

With Anderson PowerPoles TM ! 

flexing its muscles. Plugs 

into any 110 VAC wall outlet. 

It’s highly regulated with 

load regulation better than 

1%. Ripple voltage is less than 12 mV peakto-peak 

at rated load. 

No RF hash! MFJ’s exclusive 

HashSQUASH TM Filtering System eliminates 

RF hash that plagues other manufacturer’s 

set at 13.8 VDC. Frontpanel 

meters let you monitor 

voltage and current. 

Three sets of output ter- 


$ 95 259 

Ship Code D 


$ 139 95 

Ship Code F 


MFJ’s Exclusive HashSQUASH TM 

Filtering System eliminates RF hash 

that plagues other manufacturer’s 

switching power supplies. 


Fully protected -- your MFJ-4275MV 

has Short-Circuit, Overload and Over- 

Temperature protection systems. Also has an 

auto restart after a fault. Has power on and 

Fault LED indicators. 

You get front panel adjustable voltage 

from 4.0 to 16 VDC. Front-panel meters with 

backlight let you monitor voltage and current 

simultaneously. 

Attractive front panel features several 

options for connecting your gear: 1 pair of 5way 

binding posts, 2 pairs of Anderson 

PowerPoles TM , 1 pair of high-current 5-way 

binding posts, a cigarette socket for mobile 

accessories, and two pairs of quick connects. 

Battery charging feature can be used to 

charge your car battery. 

Whisper quiet fan speed increases as 

load current increases -- keeps components 

cool and protected. 

Measures 9 3 /4Wx5 1 /2Hx9 1 /2D inches. 

Weighs just 10.5 lbs. -- light enough to carry 

on DXpeditions, camping and vacations. 

No more hauling around big, bulky conventional 

power supplies that can give you a 

hernia! 

MightyLite TM 35 Amp Switching Power Supply 

short circuit, over- 

indicator for a quick warning sign of any 

load and over-tem- 

trouble that might come your way. 

perature protection 

Output connectors feature one pair of 5- 

systems. 

way binding posts for your rig, a low amper- 

Your power 

age cigarette lighter socket and quick connect 

supply will be safe 

terminals for any accessories. Also has one 

from any overheat- 

pair of 5-way binding posts for automobile 

ing or other problems 

with your equipment -- it 

will shut down before any harm 

comes to it. It also has an auto- 

battery charging. 

Whisper-quiet cooling fan keeps your 

components cool and safe for operating. 

MFJ-4235MV weighs just 4 lbs., so you 

restart after a fault. 

won’t break your back carrying it to field 

Attractive front panel features multi- day, DXpeditions, to a buddie’s house for 

color current and voltage meters with back- testing or camping or business trips. 

light -- makes it easy to monitor simultaneously. 

It has a power on and Fault LED 

Measures 7Wx41 /4x83 MFJ-4235MV 

$ 95 134 

Ship Code C 


MFJ 30/35 Amp Regulated DC Power Supply 

Massive 19.2 pound transformer, Adjustable 1-14 VDC, Quick connects, cigarette lighter socket . . . 

minals include a pair of heavy duty 5-way 

binding posts for HF/VHF rigs. 

Two pairs of quick-connects are for 

your accessories and a covered cigarette 

lighter socket is used for your mobile 

accessories. 

A front-panel fuse holder makes fuse 

replacement easy. Whisper quiet fan 

speed increases as load current increases -keeps 

components cool. Measures 9 1 /2Wx6Hx9 3 /4D inches.

MFJ Switching Power Supplies 

Power your HF transceiver, 2-Meter/440 MHz mobile/base and accessories with these 25 or 45 Amp 

MFJ MightyLiteTM Switching Power Supplies! No RF hash, Super lightweight,Volt/Amp Meters . . . 

MFJ’s new adjustable voltage switching 

power supplies do it all! Power HF/2M/440 

MHz rigs and accessories. No more hauling 

around bulky supplies that cause a hernia. 

MFJ’s 25 Amp MightyLite TM weighs just 

3.7 lbs. -- 5 times lighter than an equivalent 

conventional power supply. Measures a 

super compact 5 1 /4Wx4 1 /2Hx6D”. MFJ’s 45 

Amp is even more dramatic -- 8 times lighter, 

weighs just 5.5 lbs! Just 7 1 /2Wx4 3 /4Hx9D”. 

No RF hash! 

These babies are clean . . . Your buddies 

won’t hear any RF hash on your signal! 

None in your receiver either! 

Some competing switching power supplies 

generate objectionable RF hash in your 

transmitted and received signal. 

These super clean MFJ MightyLites TM 

meet all FCC Class B regulations. 

Low Ripple . . . Highly Regulated 

Less than 35 mV peak-to-peak ripple 

under 25 or 45 amp full load. Load regulation 

is better than 1.5% under full load. 

Fully Protected 

You won’t burn up our power supplies! 

MFJ-4125, similar to the popular MFJ- 

4225MV but is smaller and doesn’t have 

meters or cigarette lighter socket. 

Has 5-way binding posts for high current 

radio connects and a pair of speaker 

type terminals for low current accessories. 

Super protection modes include Over 

Voltage and Over Current. Whisper quiet 

internal cooling fan generates tremendous 

air flow to help keep components cool. 

NO RF HASH! 


25 Amp 

$ 99 95 

Ship Code B 


45 Amp 

$ 95 149 

Ship Code C 

They are fully protected with Over Voltage 

and Over Current protection circuits. 

Worldwide Versatility 

MFJ MightyLites TM can be used anywhere 

in the world! They have switchable AC 

input voltage and work from 85 to 135 VAC 

or 170 to 260 VAC. Replaceable fuse. 

MightyLites TM . . . Mighty Features 

MFJ MightyLites TM feature a front-panel 

voltage control. It lets you vary the output 

voltage from 9 to 15 Volts DC and gives you 

a highly regulated voltage output. 

Easy access front-panel with 5-way binding 

posts for heavy duty use and cigarette lighter 

socket for accessories. MFJ-4245MV has 2 

NO RF HASH! 

sets quick-connects on rear for accessories. 

Large 3 inch dual meters are illuminated 

to make it easy to monitor load voltage and 

current. Whisper quiet internal fan cools 

your power supply for long life. 

About the MFJ-4225MV, QST (January 

2000) said, “its external control for varying 

the output voltage is very handy for test 

bench applications,” and noted, “overall, 

noise generated by this supply is very low”. 

Super Compact MightyLite TM 25 Amp Switching Power Supply 

The smallest and lightest power supply in ham radio! Tiny 5 3 /4 Wx3Hx5 3 /4 D” fits anywhere . . . 

Ultra-Compact 0-24 VDC 

Switching Power Supply 


$ 95 99 

Ship Code A 

MFJ-4218MV has adjustable output 

from 0 to 24 VDC. You can power more 

than your HF or VHF radio. 

Adjustable low output allows you to run 

low power accessories -- 1.5V, 3V, 5V, 9V 

or any voltage in between, 0-24 VDC. 

24 VDC output setting lets you power 

your marine radio and accessories. Voltage 

adjustment control has a detent to set voltage 

at 13.8 VDC. 

Large backlighted dual meters continue 

monitoring output voltage and current. 


Filtering System makes MFJ switching 

power supplies the quietest in the industry. 

Has a pair of 5-Way binding posts for 

output connection. Output protection 

includes short, overload and over-temperature. 

Has load fault indicator with auto 

reset after each fault detected. 

Rated output current is 18A at 13.8 

VDC or 9A at 24 VDC. Easy for traveling, 

just 6Wx2 1 /4Hx6 3 /4D inches. Weighs just 

2.2 lbs. 110 VAC. 


$ 95 84 

Ship Code B 

NO RF HASH! 

MFJ-4125P 

with 2-pair Anderson 

PowerPole (R) connectors 

$ 94 95 

Ship Code B 

Ultra-Compact 15 Amp 



$ 95 59 

Ship Code A 

15A 

MFJ-4115 is super-compact, perfect for 

traveling on vacations, camping or business 

trips -- weighs just 1 1 /2 lbs and is a tiny 

3 3 /4Wx2 1 /4 Hx7 3 /4D inches. 

This tiny supply will easily fit in your 

briefcase or suitcase and power most VHF/ 

UHF or QRP radios. This supply and your 

rig will add fun to your boring hotel room! 


Filtering System eliminates RF hash that 

plagues other manufacturer’s switching 

power supplies. 

MFJ-4115 has over-voltage and overcurrent 

protection systems and works with 

AC input from 90 to 130 Volts. 

Output is 13.8 VDC, 17 Amps surge 

and 15 Amps continuous. 

It features one set of 5-way binding post 

connections and transmit and power LEDs. 

MFJ-4115 is super clean, has a quiet fan 

and super regulation. Has load fault indicator 

and automatic shut-down. 


Filtering System eliminates RF 

hash that plagues other manufac- 

turer’s switching power supplies. 

MFJ-4125 has switchable AC input 

voltage. 110 VAC at 47-62 Hz and 220 

VAC at 47-63 Hz. 

Super regulation. AC input versatility 

allows 85-135 VAC or 170-260 VAC. 

Weighs 3.5 lbs. Measures an unbelievable 

51 /2Wx21 /2Hx53 /4D”-- it’s the smallest 

and lightest power supply in ham radio! 

MFJ-4125P is similar to MFJ-4125. Adds 

2-pair of Anderson PowerPoleTM connections. 

MightyLiteTM 15 Amp 



$ 95 69 

Ship Code A 


can power your 

VHF/UHF mobile radio with 13 Amps continuous 

and 15 Amps surge. Has variable 

voltage control from 4.0 to 16 Volts with 

1% voltage regulation. It has less than 9 

mV peak-to-peak ripple at the rated load. 


Filtering System eliminates RF hash that 

plagues other manufacturer’s supplies. 

Easy-access front panel connectors: 5way 

binding posts, cigarette lighter socketand 

Voltage Adjustment control. 

Backlighted Voltage and Ampere meters. 

Power on and “fault” LED indicators. 

Switchable AC input: 90-125 or 200- 

240 selectable. Has external replaceable 

fuse. MFJ-4215MV is fully protected with 

Short-circuit, overload and over-temperature 

protection systems. It also has an 

auto-restart feature after a fault. Whisper 

quiet cooling fan. Weighs just 2.9 pounds, 

measures 5Wx3 3 /4Hx7D inches. 

http://www.mfjenterprises.com 33

MFJ/Curtis/Bencher is a winning CW combo! 

The Best of all 

CW worlds -- a 

MFJ/Curtis keyer TM in 

a compact package 

that fits on the Bencher 

iambic paddle! Buy the combination 

or just the keyer for 

your Bencher or MFJ paddle. 

MFJ’s most popular keyer 

is small but big in features giv- 

ing you adjustable weight and tone 

and has front panel volume and speed controls 

(5-65 wpm). Has built-in dot-dash memories, speaker, 

Everything you need 

to send great CW from 

this MFJ Cutris Keyer TM - 

- easy access front panel 

controls, all keyer modes, 

dot-dash memories, jamproof 

spacing, weight 

control, sidetone, built-in speaker and more. Speed, 

weight, tone and volume controls, and tune, semiauto 

and on/off switches are on the front panel. 

A dual paddle key such as the MFJ-564, lets you 

use the iambic mode. In this mode, you can insert a dot before a 

dash finishes or insert a dash before a dot finishes. Also, squeezing 

both paddles generates alternating dots and dashes. This lets 

you send characters such as C, K, and R with a single squeeze. It 

turns an inexperienced fist into a professional. 

You can use the automatic mode with a single or dual paddle. 

You automatically generate dots and dashes by pressing the paddle. 

You can switch into a semi-automatic “bug” mode to generate 

dots automatically and dashes manually. Or you can use a 

“straight key” and manually generate your own dots and dashes. 

You get dot-dash memory, self-completing dots and dashes, 

jam-proof spacing and instant start keying. 

Select Type A or Type B keying to match your sending style. 

MFJ Nano-size Keyer/Paddle Combination 

Ham radio's tiniest electronic keyer has 

MFJ-402 a built-in iambic paddle! It’s just 

$ 95 2x3x1 inches and weighs 3½ 

69 ounces! 

Ship Code A Fully-enclosed paddle has a 

“bug” feel for smooth CW. It’s precision 

formed from resilient phosphorous bronze. 

It’s easy-to-use. Just set one button and send one letter to 

change your keyer settings -- speed 5-65 WPM, weight 25%-75%, 

iambic mode A/B, normal or "bug" mode and reverse paddle. 

Screwdriver adjustment for easy speed change. Tune mode for 

tuning antenna tuner or transmitter. RF proof. 4 foot cord with 3.5 

mm plug. Keys nearly any rig. 

No on/off switch -- keyer turns off between dits! Battery lasts 

nearly shelf life. 

sidetone and auto or semi-auto/tune modes. 

Keys solid state or tube transmitters. Fully shielded. 9 volt 


battery or 110 VAC with MFJ-1312D, $15.95. 

Keyer mounts on the paddle base to form a small 

4x2 1 /4x4 1 /4”. Buy the combo or just the MFJ keyer 

(MFJ-422DX) to fit on your Bencher or MFJ-564 or 

MFJ-564B iambic paddle (see below). 

Paddles to use with MFJ-422DX 

MFJ-564 Black or Chrome, 

$69.95 (see below). 

BY-1, $129.95. Black Bencher. 

BY-2, $149.95. Beautiful 

chrome Bencher paddle. 

MFJ Curtis Iambic Keyer has Dot, Dash Memory 


$ 95 79 

Ship Code A 


Chrome 

MFJ-564/B 

$ 69 95 

Ship Code B 


$ 189 95 

Ship Code B 

MFJ Deluxe Iambic Paddles 


Black 

MFJ deluxe iambic paddles feature a full range of 

adjustments in tension and contact spacing, self-adjusting 

nylon and steel bearings, contact points that almost 

never need cleaning, precision machined frame and nonskid 

feet on heavy base. Use with MFJ-422DX/MFJ-490X 

keyers. MFJ-5166, $11.95, (left). Paddle to Keyer cable. 

Has pre-wired solder lugs on paddle end and 3.5 mm plug 

with 1/4” phone plug adaptor to fit MFJ keyer. 

MFJ-422DX 

$ 95 99 

Ship Code A 

Weight control lets you adjust your dot-dash space ratio to 

make your signal sound distinctive to bust through pile-ups. It also 

lets you compensate for the turn-on delay of your transmitter. 

Has tune switch for tuning your transmitter or antenna tuner. 

RF proof. Built-in speaker for sidetone. 

Keys solid state and tube transmitters. Use 9 volt battery or 110 

VAC with MFJ-1312D, $15.95. Attractive black cabinet measures 

5 3 /4x1 3 /4x4 3 /4 inches. 

MFJ/Curtis ECONO Keyer TM 

MFJ-401D is the 

same as MFJ-407D 

except weight and 

tone controls are 


$ 95 69 

Ship Code A 

adjusted internally and doesn’t have a tune switch. Use 9 volt battery 

or 110 VAC with MFJ-1312D, $15.95. 4x1 3 /4x3 1 /4 inches. 

Build Your Own Keyer with this Curtis Chip 

Revolutionary new Curtis Chip. Choose . . . 28 pin 

skinny DIP or SMT SOIC package. MFJ-8045ABM, $29.95. 

Pre-Wired Keyer to Rig Cables 

MFJ-5164, $11.95. Keyer to radio keying 

cable. Has phono plug on keyer end to fit MFJ 

keyers and a 3.5 mm plug with 1/4” phone plug 

adaptor to fit most transceivers. 

Pocket Travel Keyer has Built-in Paddle 

MFJ-403P 

$ 95 79 

Ship Code A 

This MFJ Travel Keyer is a 

full-featured CW keyer with a 

built-in Iambic paddle. 

Ultra-compact size 3 3 /4Wx 

1H x2 1 /4D” is perfect for traveling or for home 

use with QRP or “big” rigs. Throw it in your 

briefcase along with your MFJ Cub TM or other 

favorite on your next trip. A built-in sidetone with 

LM386 audio amplifier, speaker and volume control makes monitoring 

your sending easy. Speed adjustable from 3 to 60 WPM. 

Sidetone pitch is adjustable 300 to 1000 Hz. Weight adjustable 

from 25% to 75%. Tune mode, RF proof, Battery Saver feature. 

Select a keyer mode to suit you - - iambic mode A or B, fully 

automatic or semi-auto “bug” mode. Use 9 Volt battery, not incl. 

MFJ-403, $59.95. MFJ ultra compact CW Travel Keyer only. 

MFJ Miniature Iambic Paddle 

This miniature, lightweight iambic 

paddle is just 1 3 /4Wx1 3 /4Dx 3 /4H inches 

and weighs just 2 1 /2 ounces. Tiny 

enough to fit in an Altoids (R) tin (cord 


$ 24 95 

Ship Code A 

and all!) for protection. It’s perfect 

for traveling or for home use 

with QRP or “big” rigs. Perfect 

companion for MFJ or other key- 

ers. Great for any QRP or QRO rig! The paddle is precision 

formed from special phosphorous bronze spring material with an 

A150 temper. This gives you an excellent feel so you can send 

smooth CW. Mounted on rugged metal base with non-skid rubber 

feet. Has 4 foot cord and 3.5 mm plug -- ready to plug into keyer 

or rig! MFJ-561K, $19.95. Build your own! MFJ iambic paddle 

kit with instructions, cord, hardware needed to build your paddle.

MFJ Millenium TM CW Memory Keyer 

Is CW dead? 

Not at MFJ! MFJ’s menu driven LCD 

display makes it so easy to use, you don’t 

need an instruction manual. 

The MFJ-495 combines the latest millenium 

microprocessor technology with nonvolatile 

EEPROM memory for a full-featured, 

low cost, high reliability design. 

Send CW or load messages using a paddle, 

keyboard or computer serial port. 

Easy-to-use menus and LCD display let 

you set all keyer functions merely by pushing 

buttons. Keyer functions can also be changed 

from your paddle, keyboard or computer. 

The LCD also shows the message as it’s 

being sent from memory or live from your 

paddle, keyboard or computer. 

The MFJ-495 has 32 message memories 

of 256 characters each. You can repeat messages 

continuously, insert timed pauses within 

messages, insert an auto-incrementing serial 

number, have messages call other messages or 

insert embedded commands to change speed, 

weight, etc. automatically. 

MFJ-495 supports both direct and grid- 

Menu Memory Keyer/Bencher Paddle 

block outputs and has a port for an MFJ-495 

optional remote control. PTT out- $ 95 179 put, built-in speaker, sinewave Ship Code B 

sidetone, more! 

Features include: 

Iambic keyer with dot and dash memories; 

automatic, semi or hand-key mode. 

Keyboard Input lets you plug in any AT 

keyboard for type ahead buffer. All commands, 

functions, and memories can be done 

through the keyboard! 

Message editing capability. 

Input queue to store multiple messages. 

Auto-incrementing contest serial numbering 

from 001 to 9999. 

Digital and linear analog speed control from 

5 to 99 wpm (3:1 to 20:1 speed range) 

Farnsworth, speed from 10 to 99 wpm 

Ultra speed sets messages up to 990 wpm 

Adjustable weight 25% to 75% 

Adjustable sidetone from 300 to 1000 Hz 

Keying output delay up to 20 ms 

Push-to-talk (PTT) hang time up to 5 sec. 

Direct (pos.) or grid-block (neg.) keying 

Timed tune for XMTR adjustment 

Timed pauses in messages/message loop 

Internal speaker with adjustable volume 

Supports Qwerty and Dvorak keyboards 

190 characters type-ahead keyboard buffer 

with low buffer warning 

Dual user mode supports operators with different 

configuration settings 

Compact and handsome all-black metal 

cabinet measures just 61/4Wx21/2Hx61/4D 

in. Use 12 VDC or 110 VAC with MFJ- 

1312D, $15.95 AC adapter. 

RFI-Suppressed Keyboard 

MFJ-551, $39.95. RFI suppressed keyboard. 

Remote Control Unit 

MFJ-70, $34.95. Full function wired remote 

control for MFJ-495. 

MFJ Slimline TM Electronic Keyers with Memory 

Tired of 

sending the same 

phrase on CW 

over and over? 

“QTH, name...” 

But you don’t want to 

pay the price of a memory 


$ 199 95 

Ship Code B 


$ 95 229 

Ship Code B 

keyer, or they’re too confusing 

to use. The MFJ Slimline 

keyers have the answer -- a Slimline TM keyer 

and an iambic paddle are your entry into real 

CW, at a price not much higher than a plain 

keyer, with enough memory to store the 

essential day-to-day messages. 

Weight control lets you lengthen or shorten 

dots and dashes. It compensates your transmitter 

for a proper 1:3 ratio. Dot/dash lengths 

are adjustable for a distinctive “touch.” Has 

The MFJ Menu 

Driven Memory Keyers TM 

are the easiest memory 

keyers to operate. You can 

even operate them without 

an instruction manual! There’s no keypad, 

no complex sequence, nothing to 

remember. Just select a menu by pressing 

a button. An LED lights to indicate 

which menu is active. Then select a feature 

by pressing a Feature button. It’s as 

easy as using a computer touch screen. 

Each menu is clearly printed on the front (or top) panel -- no confusion. 

From the menu you can save and play messages, decrement 

serial numbers, set Speed, Weight, Sidetone, enter Iambic, Semi-auto, 

Handkey, Message Queue, Paddle command modes, turn Sidetone on 

and off, transmitter Tune, and set keying output on or off. 

You can select iambic A or B, reverse paddle, Morse trainer, and 

store starting serial number for contests. Bypass the menu by keying in 

simple two-letter commands. The keyer tells you its status in CW. 

You can adjust CW speed, 5 to 100 wpm, by pressing the dot or 

dash paddle smoothly or by knob control. The powerful Morse trainer 

lets you practice or teach in Farnsworth or normal mode. Select letters, 


$ 99 95 

MFJ-5166, $11.95. Paddle to Keyer cable. Has 

pre-wired solder lugs for MFJ, Bencher and other 

Iambic paddles and 3.5 mm plug with a 1/4” phone 

plug adaptor to fit most MFJ and other keyers. 

Type A and 

B keying, too. 

The Slimlines have MFJ’s 500 character 

non-volatile MessageMemoryTM . 

You can embed Message Loop, Extra 

Word Space, pause and serial number increments 

after each sending. 

LED blinks during programming and 

blinks faster for low memory. 

SlimLineTM Ship Code A 

keyers have sidetone volume 

and tone control, and CW speed (5 to 65 

wpm) and weight controls. 

Semi-auto lets you make dashes manually 

for “bug” operation. Use dual or single lever 

Super Menu Driven Memory Keyer 

numbers, prosigns, or 

any combination for 

practice using five 

character groups, or 

more realistic 1-8 

character groups. 


$ 95 119 

Ship Code B 

And more! You get contest serial 

numbering (0-9999) with auto-increment, built-in sidetone, speaker, 

front panel volume control and adjustable 300-3000 Hz tone. You can 

use automatic, semi-automatic or bug or handkey modes, reverse 

dot/dash paddles, adjust weight from 5 to 95%, and compensate for 

transmitter distortion, You can key direct or grid-block keying transmitters, 

solid state or tube rigs. Special MARS characters recognized. 

The MFJ Menu Driven Memory Keyer TM has 192 character (8K) 

memories. The memories are divided into four soft sectors. Uses 9V 

battery (not included) or 110 VAC with MFJ-1312D, $15.95. 

Memories are backed up by a lithium battery. 

Order MFJ-490, $229.95, Memory Keyer/Bencher paddle combination, 

5X3X5½ in. MFJ-490X, $129.95, is the keyer only. 

MFJ-492, $119.95, stand alone keyer, 6½X2½X6¾ inches. 

MFJ-492X,$134.95 (MFJ-492 with 8K additional memory 

installed), MFJ-80, $21.95, (8K memory for MFJ-492 only). 

MFJ-78, $34.95, full function wired remote control. 

paddle. Positive 

and negative keying. 

9V battery 

or 110 VAC with 


MFJ-441 

$ 79 95 

Ship Code A 

MFJ-442, SlimLine TM Keyer and MFJ paddle 

combo. Front panel speed, volume controls. 

MFJ-442X, $109.95. Keyer only. 

4x1 3 /4x2 3 /4 inches. Fits on your Bencher or 

MFJ-564/B iambic paddle. 

MFJ-447 SlimLine TM Deluxe keyer; front 

panel speed, weight, tone, volume controls 

and message, semi-auto, tune, power buttons. 

Jack for speaker/headphones. 6 1 /4x1 3 /4x5 in. 

MFJ-441. SlimLine TM Econo Keyer. Just 

1 1 /4 inches tall. Has volatile 89 character 

MessageMemory TM . Front panel speed/volume 

controls. 4x1 3 /4x3 1 /4 inches. 

MFJ Pre-Wired Keyer-to-rig and Paddle-to-Keyer Cables 


cable. Has phono plug on keyer end to fit MFJ 

keyers and a 3.5 mm plug with 1/4” phone plug 

adaptor to fit most transceivers. 

MFJ...the world leader in ham radio accessories 35

Morse Code Reader has Built-in Memory Keyer 

Is your CW rusty? Relax and 

plug-in this MFJ Morse Code Reader 

with built-in keyer at your operating 

position. Then watch CW turn into 

solid text messages as they scroll across 

an easy-to-read LCD display. 

It makes working high speed CW a 

breeze - - even if you’re rusty. Type-ahead 

buffer, message memories and adjustable 

speed get you ready to compete with the 

world’s best hi-speed CW operators -- and they 

won’t even know you just passed the code test! 

The MFJ-464 gives you everything you 

need to have the ultimate CW Station: 

sends and Reads 5-99 WPM . . . Automatic 

speed tracking . . . Large 2-line LCD shows 

send/receive messages . . . single or iambic 

paddle or computer keyboard operation . . . 

Front panel speed, volume controls . . . 4 

message memories . . . type ahead buffer . . . 

read again buffer . . . adjustable weight & 

sidetone . . . RFI proof . . . much more! 

Reader has Auto Speed Track 

MFJ AutoTrak TM automatically locks on, 

tracks and displays CW to 99 wpm. 

Simply plug-in your MFJ-464 to your 

receiver speaker until the lock LED flashes 

in time with the CW. 

High performance modem 

Consistently get solid copy from MFJ’s 

high performance PLL (phaselock loop) 

modem. Digs out weak signals. Even tracks 

slightly drifting signals. Of course, nothing 

can clean and copy a sloppy fist, especially 

weak signals with lots of QRM/QRN. 

Built-in keyer features 

The MFJ-464 combines the latest millenium 

microprocessor technology with nonvolatile 

EEPROM memory for a full featured, 

low cost, high reliability design. 

You can send CW or load messages using 

a paddle, keyboard or through yourcomputer 

serial port. 

Easy-to-use menus and LCD display let 

you set all keyer functions merely by pushing 

buttons. Keyer functions can also be 

changed from your keyboard or computer. 

The LCD also shows the message as it’s 

being sent from memory or live from your 

paddle, keyboard or computer. 

The MFJ-464 has 4 message memories of 

256 characters each. You can repeat mes- 

(Keyboard, paddle 

not included) 

Ship Code B Ship Code A 

No Keyboard 

MFJ Super CW Keyboard 

lets you send effortless CW as 

soon as you turn it on -- no computer to 

boot, no program to load -- just start 

typing. 

You get a standalone MFJ CW 

Keyboard that includes an RFI suppressed 

keyboard, a two line 16 character 

LCD display, eight 250 character nonvolatile message memories, 

a 150 character type-ahead buffer, iambic keyer, plus a powerful 

Morse Code trainer, more! 

Variable speed from 5 to 100 WPM, adjustable weight from 5 

sages continuously, insert timed pauses 

within messages, insert an auto-incrementing 

serial number, have messages call other 

messages or insert embedded commands to 

change speed, weight, etc. automatically. 

Sinewave Sidetone . . . More! 

MFJ-464 supports Direct keying output. 

Has PTT output, built-in speaker, sinewave 

sidetone and more! Iambic keyer with dot 

and dash memories; automatic, semi or 

hand-key mode. Input queue lets you store 

multiple messages. Auto-incrementing contest 

serial numbering from 001 to 9999. 

Adjustable Speed 5-99 WPM 

Digital linear speed control, 5-99 wpm 

Farnsworth Mode with speed adjustable 

from 10-99 wpm. 

Ultra speed sets messages up to 990 wpm. 

Adjustable weight 25% to 75%. 

Adjustable sidetone from 300-1000 Hz. 

Keying output delay to 20 milliseconds. 

Push-to-talk hang time to 5 seconds. 

Timed tune function for XMTR adjusting. 

Timed pauses in messages/message loop. 

Internal speaker with adjustable volume. 

Qwerty & Dvorak keyboards. 

MFJ-564/B 

$ 95 69 

Ship Code B 

MFJ-564 Chrome MFJ-564B Black 


Type-Ahead Buffer 

190 character type-ahead keyboard buffer 

with low buffer warning. 

Keyboard Input Use any AT keyboard to 

program functions & memories. 

Compact black metal, 6 1 /4Wx2 1 /2Hx6 1 /4D”. 

12VDC or 110VAC w/ MFJ-1312D, $15.95. 

MFJ-464 Accessories 

MFJ-5161, $16.95. MFJ-464 to computer 

serial port cable (DB-9). 

MFJ-5162, $7.95. Connects MFJ-464 to 

radio’s external speaker 3.5 mm jack. 

MFJ-5163, $10.95. Connects MFJ-464 

and another accessory to your radio speaker. 


cable. Has phono plug on keyer end to 

fit MFJ keyers and 3.5 mm plug with 1/4” 

phono plug adapter to fit most transceivers. 

MFJ-551, $39.95. RFI suppressed 

keyboard, a must to avoid RFI problems 

when operating CW keyboard mode. 

Super CW Keyboard -- No Computer Required! 


$ 159 95 


$ 129 95 


$ 199 95 

Ship Code B 

MFJ Deluxe Iambic Paddles 

to 95%, sidetone from 300 to 3000 Hz and serial number from 0 to 

9999. Has buffer and memory full audible indicators. Keys solid 

state and tube rigs. AT101 compatible keyboard plugs into compact 

3 1 /2x2 1 /2x3 1 /2 inch interface. Use 12 VDC or 110 VAC with 

MFJ-1312D, $15.95. MFJ-452X, No keyboard. 

Use MFJ-5164, $11.95, keyer to rig keying cable. 

MFJ Dedicated CW Keyboard 


like MFJ-452 but 

without LCD 

display and has 

two 100 character 

memories. 

MFJ-451X, no 

keyboard. 

MFJ deluxe iambic 

paddles feature a full 

range of adjustments in 

tension and contact spacing, 

self-adjusting nylon 

and steel bearings, contact 

points that almost 

never need cleaning, precision 

machined frame 

and non-skid feet on heavy base. MFJ-422D and MFJ422DX/MFJ-490X keyers can be used 

with these paddles. MFJ-5166, $11.95. Iambic Paddle to keyer cable. Has pre-wired solder 

lugs on paddle end and 3.5 mm plug with 1/4” phone adapter to fit MFJ keyer. 


$ 95 129 

Ship Code B 


$ 109 95 

Ship Code A 

No Keyboard

MFJ Pocket Size Morse Code Tutor 

Learn Morse code fast, anywhere . . . LCD display lets you check your copy 

instantly . . . easy no-code beginner’s course . . . plain English QSOs . 

Beginner’s Course 

ARRL/VEC format. 

Learn small fixed sets of 

characters. Previously 

learned sets are combined with new sets to 

reinforce all you have learned. 

Practice copying, then instantly replay 

to check your copy on the LCD display. 

Custom Character Sets 

Having trouble with certain characters? 

Build and save 3 custom sets of 16 characters 

for extra practice -- an MFJ exclusive. 

Practice copying realistic on-the-air 

style plain English QSOs. Gets you ready 

to pass your FCC test and upgrade. Also 

builds confidence for your first real contact. 

MFJ Word Recognition Mode TM 

MFJ’s Word Recognition Mode TM gives 

you hundreds of commonly used words in 

ham radio. Practice recognizing entire 

words instead of individual letters. 

Select letter, number, punctuation, 

prosign or FCC character sets (has only 

letters, numbers and prosigns required on 

FCC tests), random call signs, random 

words, QSOs or combo sets for practice -you’ll 

never run out of study material! 

MFJ InteractiveMode TM 

InteractiveMode TM lets you decide 

when to copy the next or previous group 

and how many -- great for beginners! 

Select normal or 

Farnsworth spacing. 

Farnsworth makes it 

easier to learn entire characters. Stop 

counting individual dots and dashes that 

slows learning! Adjustable 10 to 60 WPM 

for high-speed. 

Use fixed length or more realistic random 

length groups (up to 8 characters). 

You can change speed on-the-fly while 

playing a session 3 to 60 words-per-minute. 

SettingSaverTM MFJ-418 top view 

Settings are automatically saved, ready 

to use next time--just turn on and replay. 

Check your copy, select from menus 

and program custom characters and words 

on 2 line LCD display with 32 huge 1/4 

inch high-contrast characters -- powerful 

sound and sight learning! 

Only MFJ gives you SilkySmooth 

Sidetone TM with TruTone TM sinewave and 

SoftStart TM dots/dashes -- lets you concentrate 

on learning without distracting, harsh 

keyclicks. Use earphones for private practice 

or built-in speaker for groups. Volume 

control. Variable pitch 300-1000 Hz. 

Fits in your shirt pocket with room to 

spare -- smaller than a pack of cigarettes. 

Tiny 2 1 /4x3 3 /4x1 in., weighs less than 5 1 /2 

ounces. Uses 9 volt battery (not included). 

Tapes play the same old boring stuff 

over and over. Unlike tapes, you’ll never 

memorize MFJ-418’s random sessions. 

Pocket Tutor Accessories 

MFJ-26B, $9.95. Soft 

leather protection for MFJ-418 

with pocket/belt clip. 

MFJ-281, $12.95. Speaker 

for group practice. Loud, powerful 

audio! 3 3 /4x3x2 1 /4” 

More pocket size MFJ Morse Tutors 

MFJ-417, $69.95. Similar to MFJ-418, 

but no LCD. Most software features. 

MFJ-413, $49.95. Similar to MFJ-417, 

less random words, QSOs, SettingSaver TM . 

Deluxe Morse Key and Oscillator for Code and Sending Practice 


Telegraph key only 

$ 14 95 

Ship Code A 


$ 89 95 


$ 95 39 

Ship Code B 

Ship Code A 

MFJ-557 Deluxe Code 

Practice Oscillator features a 

Morse straight key on a nonskid 

heavy steel base -- stays 

put and doesn’t move around 

while you’re sending. 

MFJ-557 lets you practice 

sending code at home, work, 

riding in your car -- practically anywhere -because 

it’s so easy to take it wherever you go. 

Volume control adjusts from barely audible to blaring 

full sound. 

You can practice without bothering anyone. 

Tone control gives you a wide adjustment, from high 

“squeaky” to low “booming” tones. You even get an earphone 

jack for private listening times. 

Plug in an external speaker (MFJ-281, $12.95, powerful compact 

speaker) for high volume in the classroom. 

MFJ-557 runs on a 9 volt battery (not included) or 110 VAC 

with MFJ-1312D, $15.95. Plugs into jack on the side. 

When you’re finished cleaning up your fist with the MFJ-557, 

hook up the straight key to your transmitter and go on-the-air. 

Don’t pass up a super buy! Built-in speaker, adjustable contacts. 

8 1 /2x2 1 /4x3 3 /4 inches. Black. 

Use HT for on-the-air CW Fun Classroom Code Oscillator Classroom Morse Code Tutor 


JimHandyTM CW 

interface plugs into 

your 144/440 MHz 

handheld and converts 

it into a modulated 

CW transceiver -- just plug 

in your key. 

Get your ham buddies together 

on-the-air and enjoy some fantastic CW 

fun. Run a little code practice on your 

repeater. Start your own FM CW Net. 

Have fun and upgrade! A transmit/receive 

switch automatically switches your HT to 

transmit when you send CW and returns 

you to receive when you stop keying. 

Built-in speaker, volume control and 

great sounding true sinewave sidetone -- no 

harsh keyclicks. 4Wx11 /4Hx33 MFJ-552 

$ 95 99 

Ship Code A 


Use 9V battery (not included). Pre-wired 

patch cables, $17.95 for your HT on page 

38. MFJ-550 key only, $14.95. 

The 

world’s 

finest code 

practice 


$ 95 99 

Ship Code A 

oscillator is designed for demanding classroom 

use and abuse. 

It produces a true pure sinewave 

sidetone with no trace of harsh keyclicks. 

You’ll hear the clearest, sweetest sounding 

CW you have ever heard. Delivers full 1 

watt into built-in 3” speaker -- fills an 

entire room. Low distortion -- less than 

.2% total harmonic distortion from its BTL 

(Bridge-Tied-Load) amplifier. Volume control, 

400-1000 Hz tone control, on/off 

switch, power on LED, 1 /4 inch key jack, 

3.5 mm external speaker jack, uses 12 

VDC. All metal enclosure 4 3 /4x1 1 /2x5 in. 

Save $15.85! MFJ-554X, $119.95. 

Includes MFJ-554 Code Oscillator, MFJ- 

281 ClearTone TM speaker, MFJ-550 

Telegraph Key, & MFJ-1312D AC adapter. 

The 

Cadillac of 

all Morse Code trainers! For VECs, 

Elmers, teachers, ham clubs, schools and 

hams who want the best. Has everything in 

the famous MFJ-418 Pocket Size Morse 

Code TutorTM plus . . . Hear powerful classroom 

audio from its built-in speaker/ amplifier 

with true sinewave sidetone and no 

harsh keyclicks. Down/upload custom practice 

groups from PC with serial port . . . 

Store 16 FCC exams for VECs . . . Print 

correct answers using printer port . . . Record 

quality code tapes with tape output . . . Send 

on-the-air CW practice with HF/VHF radio 

interface. . . Use full featured memory keyer 

with 1000 character memory. Serial port 

and open end HT cables included. 110 VAC 

/12VDC operation. 81 /2Wx21 MFJ-414 

$ 95 219 

Ship Code B 



MFJ Pocket size Morse Code Reader TM 

Hold near your receiver -- it instantly displays CW in English! 

Instant Replay . . . 32 Character LCD . . . High-Performance Modem . . . Computer Interface . . . Battery Saver . . . 

Is your CW rusty? 

Relax and place this 

tiny pocket size MFJ 

Morse Code Reader near 

your receiver’s speaker . . . 

Then watch CW turn into solid text 

messages as they scroll across an easy-toread 

LCD display. 

Use it as a backup in case you mis-copy 

a few characters - - it makes working high 

speed CW a breeze - - even if you’re rusty. 

Practice by copying along with the 

MFJ-461. It’ll help you learn the code and 

increase your speed as you instantly see if 

you’re right or wrong. 

Eavesdrop on interesting Morse code 

QSOs from hams all over the world. It’s a 

universal language that’s understood the 

world over. 

Automatic Speed Tracking 

MFJ AutoTrakTM MFJ-461 


automatically locks on, 

tracks and displays CW speed up to 99 

Words-Per-Minute. 

Simply place your MFJ-461 close to 

your receiver speaker until the lock LED 

flashes in time with the CW. 

Four Display Modes 

1. Bottom line scrolls and fills with text, 

then that entire line is displayed on top line 

until bottom line refills -- makes reading 

text extra easy! Automatically displays 

speed in WPM. 

2. Same as 1, without speed display -gives 

you maximum text display. 

3. Top line scrolls, bottom line displays 

speed in Words-Per-Minute. 

4. Both top and bottom lines scroll. 

Two-line LCD display has 32 large 1/4 

inch high-contrast characters. 

MFJ Instant Replay 

The last 140 characters can be instantly 

replayed. Lets you re-read or check copy if 

you’re copying along side the MFJ-461. 

High Performance Modem 



modem. Digs out weak signals. Even tracks 

slightly drifting signals. 

Of course, nothing can clean up and 

copy a sloppy fist, especially weak signals 

with lots of QRM/QRN. 

Computer Interface 

The MFJ-461’s serial port lets you display 

CW text full screen on a bright computer 

monitor -- just use your computer 

serial port and terminal program. 

More Features 

When it’s too 

noisy for its mic 

pickup, connect it to 

your radio with a cable. 

Battery saving feature puts MFJ-461 to 

sleep during periods of inactivity. It wakes 

up and decodes when it hears CW. 

Uses 9 Volt battery (not 

included). 

True Pocket Size 

Fits in your shirt pocket with 

room to spare - smaller than a pack of cigarettes. 

Tiny 2 1 /4x3 1 /4x1 in. 5 1 /2 ounces. 

Accessories 

MFJ-26B, $9.95. Soft leather protective 

pouch for MFJ-461. Clear plastic overlay for 

display, push button opening, strong, durable 

pocket or belt clip secures MFJ-461. 

MFJ-5161, $16.95. MFJ-461 to computer 

serial port cable (DB-9). 

MFJ-5162, $7.95. Connects MFJ-461 to 

radio external speaker 3.5 mm jack. 

MFJ-5163, $10.95. Connects 

MFJ-461 and another accessory 

to radio external speaker, 3.5mm. 

Switch any two Mics to any two Rigs 

MFJ's new MFJ-1263 Microphone 

Control Center lets you mix and match any 

two microphones to any two transceivers. 

The microphones or transceivers can 

have 8-pin round or 8-pin modular connectors. 

You don't have to change connectors 

or rewire -- just push buttons. 

Your favorite microphones will never 

become obsolete. 

You can use your favorite microphone 

with your present or new rig by pushing a 

button. 

You can instantly switch from a hi-fi 

ragchewing mic to a hard-hitting DX mic 

when a rare one suddenly pops up. 

You can plug in an PTT foot switch 

(MFJ-1709, $19.95) or let your computer 

or voice keyer (MFJ-434B, $199.95) control 

your PTT line to free your hands for 

contesting and DXing. 

Plug in a boom mic/headset (MFJ- 

393, $49.95) to save the day during noisy 

field day or multi-operator contesting. 

You can plug in your headphones and 

an external speaker (MFJ-281, $12.95). 

A headphone volume control eliminates 

the need to readjust your rig's volume 

when you switch the speaker on. The 

headphones are always active. A push but- 

ton turns the speaker on or off. 

When you want to use 

your desk or hand mic just 

push a button. 

An input jack and On/Off switch is 

provided to insert external audio into the 

microphone audio input line. Great for 

inputting sound card, SSTV, AFSK, TNC 

and other audio sources. 


$ 119 95 

Ship Code B 

The MFJ-1263 works with any radio - 

- Kenwood, Yaesu, Icom, Alinco and compatible 

transceivers - using an 8-pin round 

or modular microphone jack. Internal 

jumpers configure the MFJ-1263 for your 

radio -- your mics never become obsolete! 

6Wx1½Hx5D inches. Includes one MFJ- 

5398 and one MFJ-5397MX radio cables. 

ORDER Extra Radio Cables! 

MFJ-1261/1260/1263 to transceiver 

cables, $17.95. Order MFJ-5398 for 8-Pin 

Round; MFJ-5397MX for 8-Pin Modular. 



$ 95 109 

Code A 

MFJ-1261, $109.95. Like MFJ-1263 but 

has one mic input and two radio outputs. 

One MFJ-5398, MFJ-5397MX included. 

MFJ-1260, $99.95. Same as 


$ 99 95 

Code A 

MFJ-1263 but has two microphone inputs 

and one radio output. One MFJ-5398 and 

one MFJ-5397MX radio cables included. 

MFJ-1251 Universal 

Microphone Converter 

Convert any 8pin 

round or modular 

microphone for 

use with any 8-pin 


$ 24 95 

Code A 

round or modular radio. 

Example: You want to use your favorite 

Yaesu FT-2000 8-pin round microphone with 

your Icom IC-706 rig. Or you bought a modular 

soundcard interface, but now you have an 

8 pin round rig. No need to buy a new mic or 

accessory! Use your favorites and save money 

by using what you already have! 

Internal jumpers set any microphone to 

match any radio. Supplied with one 8-pin round 

and one 8-pin modular output cable to radio.

Save Your Voice with the MFJ Contest Voice Keyer 

Use 8-pin modular or 8-pin round microphone plug! 

Let this microprocessor controlled MFJ 

Contest Voice Keyer TM call CQ, send your call 

and do contest exchanges for you in your own 

natural voice! 

Store frequently used phrases like “CQ 

Contest this is AA5MT”, “You’re 59” . . . 

“QTH is Mississippi” and more! Contest by 

pressing a few buttons and save your voice. 

You can record and play back five natural 

sounding messages in a total of 75 seconds. 

EEPROM technology keeps messages stored 

for up to 100 years -- no battery backup needed. 

You can repeat messages continuously and 

vary the repeat delay from 3 to 500 seconds. 

Makes a great voice beacon and calling CQ is 

so easy. A receive audio jack lets you record 

and play back off-the-air signals -- great help 

if you didn’t get it right the first time! No more 

“Please repeat”. 

A playing message can be halted by pressing 

the Stop Button, your PTT mic button or 

A high-sensitivity ceramic microphone element 

(10.5 inches with FlexNeck TM ) bends and 

stretches to your most comfortable operating 

position. A fine mesh metal grill helps to 

eliminate background noise. 

MFJ-299 has a high quality compressor 

amplifier with high, medium, and low selection 

switches. It always sends out a constant 

and optimum level without distortion, regardless 

of audio input level. 

Equipped with a built-in graphic equalizer 

with center frequencies of 270, 540, 1000 and 

2000 Hz. Gives best audio quality for FM 

mode and max efficiency for SSB. 

Has On-Air indicator and an output level 

volume control. 

On-Air blinks on and off when in receiving 

mode and will light up continuously when 

transmitting. 

MFJ-299 is equipped with PTT momentary 

and PTT lock switches that allow you to 

switch between long one-sided QSOs and fast 

two-sided conversations. 

The frequency up/down switches let you 

operate your transceiver at your desktop 

microphone. 4 function keys (CALL, VFO, 

MR, PF) are for Kenwood transceivers only. 

An output level meter lets you adjust 

the output level NOT to exceed 0 dB. 

Arevolutionary triple radio input 

socket makes it super easy to install 

for any model transceiver: Icom, 

Yaesu, Kenwood and compatible 

transceivers. See cable chart below. 

Built-in battery check circuit. Press 

power switch and the level meter 

shows battery condition with power 

voltage for a few seconds. 

by your VOX PTT line. A 

closure to ground via 

remote control or computer 

also halts messages. 

Has jack for remote or 


$ 199 95 

Ship Code B 

computer control (using CT, NA, TR or other 

program and its interface). Lets you select, 

play and cancel messages. 

The MFJ-434B is transparent to your 

microphone -- your mic’s audio characteristics 

do not change when your MFJ-434B is 

installed. Dual controls make it easy to tailor 

MFJ Desk Mic/Ham Station Console 

MFJ Desk Mic 



ICOM 

MFJ-5397I 

MFJ-5397I 

Kenwood 

MFJ-5397K 


MFJ-624E Deluxe Hybrid Phone Patch 

gives you crisp, clear, hum-free audio, and 

that’s what phone patching is all about. It’s 

jumper selectable for Kenwood, Icom, Yaesu, 

and Alinco rigs with 8 pin mic connectors. 

Use VOX or push-to-talk. RF pi-filters and 

PC board eliminates RF feedback. Use with 

virtually any rig. Built-in VU meter monitors 

phone line levels to prevent cross talk. Adjust 

null depth for maximum isolation between rig. 

Separate XMTR /receiver gain controls eliminate 

need to readjust your rig after patching. Null 

YAESU 

MFJ-5397Y 

MFJ-5399Y 

5399Y2 (FT-847) 


$ 95 99 

Ship Code B 

MFJ-297 Desk Mic 

MFJ-297 speech fre- 

quency tailored microphone 

cuts through noise and QRM. 

Switch for powerful SSB punch 

or full range broadcast quality 

FM/AM. Has Silibant Sound 

Shield TM , momentary/locking PTT 

switch, On-Air LED, frequency 

up/down button, output level 

control and more! 4Wx11/2H6D 

ICOM 

MFJ-5397MX 


Kenwood 




$ 69 95 

Ship Code A 

inches with 11 inch flexible boom. 1 lb. Use 2 

“AA” batteries. Select cable from chart, below. 

GooseNeckTM Microphone Holder 

• Heavy-duty all-metal base stays put! 

• GooseNeckTM gives super flexibility 

to move your mic where you want! 

• Tough, Durable plastic micro- MFJ-390 

phone clip holds tight! 

$ 95 14 

• Turns your favorite handheld Ship Code A 

microphone into a super attractive 

desktop mic! 

8 Pin Round Mic Plug - $17.95 each 8 Pin Modular Mic Plug - $17.95 each 

MFJ-624E Hybrid Phone Patch gives crisp, clear hum-free audio 


$ 159 95 

Ship Code B 

YAESU 

MFJ-5397MY 


control,standard 

phone connection, RJ-11. Speaker jacks, 

audio in/audio out. 8x2x6”. Use 12VDC, 9V 

battery or 110 VAC with MFJ-1312D, $15.95. 

Includes output cables to connect transceivers 

with 8 pin round or 8 pin modular mics. 

audio level to match your voice. 

All audio lines are RF filtered to eliminate 

RFI, audio feedback and distortion. An audio 

isolation transformer totally eliminates hum 

and distortion caused by ground loops. 

It’s easy to use -- just plug in your 8 pin 

microphone cable and plug the MFJ-434B 

shielded cable into your transceiver’s mic 

connector. Internal jumpers let you customize 

it to Kenwood, Icom, Yaesu, Alinco or Radio 

Shack rigs. Use your station or built-in 

microphone for recording. 

Built-in speaker-amplifier lets you monitor 

stored messages. 3.5 mm speaker/headphone 

jack. SMT technology. 

Use 9 Volt battery, 9-15 VDC or 110 VAC 

with optional MFJ-1312D, $15.95. Measures 

a compact 6 1 /2Wx2 1 /2Hx6 1 /2D inches. 

MFJ-73, $34.95. Remote Control Head 

with cable for MFJ-434B lets you set the 

MFJ-434B out of the way. 

MFJ Professional 

Boom-Mic Headphones 

MFJ-393 I/K/Y 

$ 95 69 

Ship Code A 

This professional 

grade 

MFJ Boom-Mic 

Head-phone set 

is for contesting, 

DXing and traffic 

nets. Comfort 

designed leatherette 

padding lets you operate 

for hours at the rig. 

Superb 3/4 inch 

thick padding on each ear and headband. 

MFJ-393 is so super lightweight, you won’t 

even know they’re there! 

Headband adjusts for perfect fit to keep 

out external noise. Frequency response is 

enhnanced for communications to bring out 

speech fidelity you never knew existed. 

Signals never sounded so clear! 

The flexible microphone boom lets you 

position the mic comfortably at an optimum 

distance to minimize silibant sounds. MFJ’s 

frequency tailored microphone element lets 

you bust through noise and QRM! 6 feet of 

cable lets you move about your ham station! 

Even casual operators will appreciate the 

advantages of MFJ’s superbly crafted Boom- 

Mic headphones for hands-free operating and 

DXing at an incredibly low MFJ price. 

MFJ-393 I/K/Y, $69.95. Headphones with 

pre-wired adapter cable. MFJ-393I for 8-pin 

round Icom and compatibles, MFJ-393Y for 

Yaesu 8-pin round and compatibles, MFJ- 

393K for Kenwood 8-pin round. MFJ- 

393MI for 8 pin modular Icom and com- 

patibles, MFJ-393MY for Yaesu and MFJ- 

393MK for Kenwood and compatibles. 

MFJ-393, $49.95. Headphones only. 

Does not include prewired radio cable. 

MFJ PTT Foot Operated Switch 

Add the luxury of foot 

control PTT transceiver 

operation. Keeps 

your hands free for 

logging, computer 

operation and tuning. 

Reduces fatigue and improves 

efficiency -- could be the difference 

between winning or losing 


$ 95 19 

Ship Code A 

a contest. 2 1 /2Wx3 1 /2Dx1 1 /4H”. Non-skid pad 

foot pedal. 1/4 in. phone plug. 10 ft. cord. 


MFJ SpeechArticulator TM improves transmit speech inte ligibility 

MFJ-653 hamProAudio TM Speech 

Articulator TM greatly improves transmit 

speech intelligibility for super punch! 

Based on extensive speech 

research, the MFJ-653 uses optimized frequency 

shaping to concentrate the energy 

in the band of frequencies where speech 

intelligibility is concentrated. It also 

removes powerful low frequencies that 

overwhelms the important high frequencies 

that carry intelligibility. 

You can boost the highly intelligible band 

of frequencies centered around 2 kHz by up 

to 16 dB and gently remove the powerful, low 

frequencies that have little intelligence. The 

high-pass filters cutoffs are 1.1 kHz and 500 Hz. 

Using a SSM-2166 broadcast industry 

speech compression IC the MFJ-653 syllabic 

compressor with its adjustable 15 to 1 

compression ratio can nearly double your 

SO2R switches Mic/PTT/keyer/soundcard for 2 radios 

Have you got two radios, but only one keyer, one headphone set, one paddle and other accessories? 

MFJ’s Single Operator/Two Radio Switch (SO2R) is at your rescue! Save money, reduce clutter . . . 

Ship Code A 

Have 

you got 

two radios, but only one keyer, one headphone 

set, one paddle and other accessories? 

MFJ will unclutter your operating 

position and save you money -- you only 

need one microphone, keyer, soundcard 

interface, iambic paddle, etc. 

MFJ-643 lets you operate two radios 

with the following accessories: Desktop 

and headset Microphones, keyers/keys/paddles, 

soundcard interfaces, modems, etc. 

The MFJ-643 is designed for easy use. 

Just set the internal jumpers for the MFJ- 

393 Professional Boom-Mic Headphones, 

Heil series headphones, a computer boom- 

Mic or computer boom-mic Headset. 

You get instant LED visual indication of 

the transmit audio path so you know which 

radio your audio is being sent to. 

On receive, you can instantly choose 

MFJ hamProAudio TM Computer-controlled SO2R Switch 

MFJ-645 Universal computer inter- 

$ 95 face provides seamless inter- 

249 action with computer logging 

Ship Code A 

and SO2R programs for effortless 

“Single Operator/2 Radios” operation. 

MFJ-645 extends capabilities of MFJ- 

644 and includes computer control -- 

MFJ hamProAudio TM 2-Radio Headphone Selector/Mixer 

Ship Code A 


combines or selects 

audio from two different receivers -- Great 

for operating "split" for HF contests and 


$ 149 95 

Ship Code A 


$ 139 95 


$ 49 95 

RF output power with low distortion. 

A highly effective noise gate (downward 

expansion) with front panel level and delay 

controls smoothly removes annoying background 

noise picked up during speech pauses. 

The results? You’ll be heard and understood. 

Powerful, highly intelligible speech 

gives you a commanding presence that 

slices through DX clutter! 

You can use any transceiver and with its 

UniversalMic TM Interface, you can use 

almost any microphone (high/low impedance, 

dynamic and electret) with the MFJ- 

653, regardless of whether or not the 

between Mix, Radio 1, Stereo or Radio 2 

depending on how you want the audio presented 

to your headphones. 

The input source connector is a 3.5mm 

stereo jack. Your input source can be a 

dynamic or electret mic (low or high impedance), 

stereo or monaural receiver audio, 

sound card or modem, or key or keyer. 

You have a choice of PTT functions: 

Use your microphone's PTT switch, a foot 

DXing, or cross-band for VHF/UHF satellite. 

Just connect the audio output of two 

receivers to the two 3.5mm audio connectors 

on back of the unit. Then plug in your 

stereo headphones and you are ready to go. 

MFJ-640 provides both 1/4” and 3.5mm 

stereo headphone jacks -- no need for adapters! 

From the front panel you can select the 


or hand switch or the convenient PTT 

switch located on the front of the MFJ-643. 

There are also additional inputs, dual 

outputs for your keyer, and two lines to 

switch an antenna between your radios, key 

an amplifier, or anything else you want to 

use them for. 


MFJ-1312D power supply. Compact 


MFJ hamProAudioTM Universal SO2R Switch 

Enhanced version of the MFJ-643 interfaces with virtually any mic connector 

MFJ-644 is similar to the MFJ-643, 

but is enhanced with the UniversalMicTM MFJ-644 

$ 95 159 

Ship Code A 

Interface. This MFJ exclusive lets you 

use any mic with any radio. Internal 

jumpers configure any microphone to any radio. 

MFJ-644 also gives you three additional input 

sources: 1) An 8-pin modular (RJ-45) input jack, 2) An 8 pin round input jack, and . . . 

3) MFJ's own input 3.5 mm jack. The 3.5 mm jack allows the user to choose audio and 

PTT functions from the Heil series of Boom-Mic Headsets and also provides phantom 

voltage on the tip for the MFJ-393 Boom-Mic Headphones or on the ring for a computer 

Boom-Mic or computer Boom-Mic headset. Compact 7 1 /4Wx2 3 /4Hx5 1 /2D inches. 

Permits MFJ-645 to interoperate with 

WinEQF, CT, NA, TRLog, and Write-Log. 

Its Universal Mic TM Interface lets you use 

any mic with any radio. Internal jumpers 

configure any microphone to any radio. 

MFJ-645 easily interfaces with the 

MFJ-1275 and MFJ-1279 Sound Card 

Interfaces giving you full control over your 

digital modes. You can choose which radio 

is in the digital mode, or you can even operate 

dual digital modes. And besides the 

normal manual PTT capabilities as those of 

microphone was designed for your particular 

transceiver. 

Microphone input jacks include a RJ45 

modular, an 8 pin round and MFJ's exclusive 

programmable 3.5-mm. MFJ’s programmable 

3.5 mm jack lets you use Heil 

series, MFJ-393 boom-mic headphones or 

even an inexpensive computer boom-mic 

headset and provides phantom voltage 

when needed. 

An adjustable preamplifier lets you even 

use low-level output microphones. 

Compact size -- 5Wx1 3 /4Hx4 3 /4D inches. 

Takes little room on your desk and small 

enough to use mobile where you really need it. 

Output cables to connect transceivers 

with 8-pin round or 8-pin modular microphone 

connectors are included. 


MFJ-1312D power supply. 

the MFJ-644, when connected to the MFJ- 

1275 or MFJ-1279 Sound Card Interfaces 

your digital mode can also control the key line. 


MFJ-1312D power supply. Measures 


All MFJ hamProAudio TM accessories 

are designed with the serious ham in 

mind. The choice of components and 

extensive RF filtering and bypassing 

allow for a unit that is designed to 

be used in an RF environment. 

audio output desired - Mix, Radio 1, 

Stereo, or Radio 2. In the Mix mode both 

radios are combined in both the left and 

right earphones, and the audio mixing levels 

between the two radios are controllable. 

In the Stereo mode, Radio 1 is heard in the 

left ear and Radio 2 is heard in the right ear. 

Compact 4 3 /4Wx2 1 /8Hx5D inches.

MFJ hamProAudio TM Equalizer/Conditioner 

MFJ hamProAudio TM console gives you . . . 8-Band Equalizer . . . Downward Expansion noise 

gate . . . Smooth, clean Compression . . . Limiter . . . Low noise Preamp . . . Universal Mic- 

Interface . . . VU Meter . . . Headphone Monitor . . .Auxiliary Input . . .Push-to-Talk jack . . . 

B 

MFJ brings Pro Audio to ham radio! 

MFJ makes sophisticated Pro Audio 

gear user friendly, affordable and RF bulletproof. 

MFJ adapted Pro Audio’s heart and 

soul to ham radio communications. 

The MFJ-655B all-in-one audio console 

gives you Pro Audio processing that makes 

your audio professional sounding. 

It gives you all the capabilities you'll 

ever need . . . 8-Band Equalizer . . . 

Downward Expansion noise gate . . . clean 

Compressor . . . smooth Limiter . . . low 

noise Preamp . . . universal microphone 

interfacing . . . impedance matching . . . 

level control . . . and RF/audio isolation. 

Its processing is so smooth and transparent, 

no one will detect its presence. All 

they will hear is your outstanding audio 

that brings you unsolicited compliments. 

A built-in headphone monitor lets you 

hear improvements as you make them and 

a VU-meter lets you accurately adjust levels. 

An auxilary input lets you use other 

audio sources and a push-to-talk jack lets 

you use microphones without PTT. 

The MFJ-655B uses the Analog Devices 

SSM2166. This professional quality audio 

conditioner gives outstanding performance 

over an exceptionally wide bandwidth with 

very low noise and very low total harmonic 

distortion, typically .25%. 

An 8 Band Equalizer lets you adjust 

your voice for full quality ragchewing audio 

or powerful, pileup penetrating audio. 

An adjustable Downward Expansion 

noise gate gives you transparent background 

noise reduction. 

A clean, low-distortion Compressor 

gives you more powerful, richer, fuller 

sounding speech with more talk power. 

A smooth Limiter keeps instantaneous audio 

peaks from overdriving your transmitter and 

prevents SSB distortion and splatter. 

hamProAudio TM 

Equalizer/Conditioner 

More compact and has 

everything that the MFJ-655 

has except for the built-in 

VU meter. Measures 

9Wx31 MFJ-654 

$ 95 199 

Ship Code B 


Front panel controls let you MFJ-655B 

easily adjust input and output levels. $ 95 

You can use nearly any micro- 219 

Ship Code B 

phone with any transceiver with its 

Universal Mic-Interface, pre-amp, mic element 

voltages, impedance matching and PTT jack. 

Plug in your headphones to hear your rig’s 

received audio or plug in your MFJ, Heil or 

computer boom-mic headset to talk and hear. 

New! The Compressor and Equalizer 

can be used independently of each other. 

8 Band Equalizer 

The MFJ-655B voice band equalizer 

divides the speech frequencies into eight 

bands -- 50, 100, 200, 400, 800, 1600, 2400 

and 3200 Hz. You can increase or decrease 

the gain of each band by 16 dB. 

For ragchewing, you can adjust for rich, 

full quality audio. And for Dxing, you can 

increase the high and reduce the low frequencies 

for a highly intelligible signal that 

lets you punch through DX pileups. 

You can turn ordinary, even poor microphones 

into pricy professional sounding ones. 

Equalization compensates and improves 

your entire audio chain -- from your voice 

to your microphone and through your radio. 

Downward Expansion noise gating 

Downward expansion noise gating eliminates 

or greatly reduces background noise 

when you stop speaking -- no more amplifier 

fan noise, dogs barking, kid’s music or traffic. 

Downward expansion is a professional 

audio technique. When you stop talking it 

smoothly attenuates low-level noise by 

reducing gain instead of abruptly cutting 

off like a noise gate -- background noise 

smoothly vanishes. 

You control the level at which downward 

expansion starts and the delay when it ends. 

Clean, Smooth Compression 

Natural unprocessed voice has peaks and 


transmit audio Conditioner 


$ 129 95 

Ship Code B 

Transmit audio Microphone 

Conditioner. Downward 

Expansion noise gate, 

Compressor, Limiter, low 

noise Preamp, Universal Mic-Interface, 

headphone monitor, PTT, Auxiliary-in, RF 

proof, aluminum case. 9Wx2 1 /4Hx5D in. 

valleys. The average power of SSB speech 

is only 15 to 30 percent of peak power. 

If instantaneous peaks are reduced, average 

power increases significantly. 

The superb Analog Devices SSM2166 

provides smooth, clean, almost transparent 

compression over a very wide bandwidth. 

It reduces speech peaks as much as 15 times. 

Just a small amount of clean compression 

is impressive and gives you more powerful, 

richer and fuller sounding audio. 

For DXing where every ounce of power 

counts, you can use more compression to 

increase average power. 

Most of the speech power is in the 

lower speech frequencies. 

Attenuating these lower frequencies 

with the equalizer reduces their power. 

This lets you increase compression for 

weaker high frequencies -- where most of 

the speech intelligibility lies. 

The MFJ-655B compressor does a 

superb job in creating an exceptionally 

clean, higher average power SSB signal. 

Limiting -- splatter prevention 

If occasional large audio peaks exceed a 

fixed set level, the compressor's limiting 

function quickly attenuates them. 

Limiting prevents over-driving your 

microphone input, transmitter and amplifier 

causing SSB distortion and splatter. 

In the MFJ-655B, compression and limiting 

work jointly to provide a level, constant 

output. 

Universal Mic-Interface/Pre-Amp 

Standard XLR, 8-pin round or 8-pin 

modular microphone jacks are provided on 

the back panel. You can also plug in your 

MFJ, Heil or computer boom-mic headset. 

A PTT jack for a foot switch or other lets 

you use microphones without push-to-talk. 

Its Universal Mic-Interface lets you use 

any mic with any radio. Internal jumpers 

configure any microphone to any radio. 

A front panel controlled low noise preamp 

gives you up to 20 dB gain. 

Select 600 Ohm, 200 Ohm or Hi-Z input 

impedances to match dynamic, electret or 

high impedance crystal/ceramic microphones. 

Has 8, 5, and 11 /2 VDC mic voltages. 

One MFJ-5398 for 8-pin round and one 

MFJ-5397MX for 8-pin modular included. 

Use 12 VDC or 110 VAC with MFJ- 

1312D, $15.95. 103 /4Wx31 /4Hx5D inches. 


transmit audio Equalizer 


$ 129 95 

Ship Code B 

Voice Band Equalizer 

(300, 600, 1200, 2400 Hz 

center frequencies), low 

noise Preamp,Universal 

Mic-Interface, headphone monitor, PTT, 

Auxiliary-in, RF proof, aluminum case. 

7 1 /4Wx2 1 /4Hx5D inches. 

MFJ . . . The World Leader in Ham Radio Accessories 41

MFJ Speech Intelligibility Enhancer 

...makes barely understandable speech highly understandable! 

“What did you say?” 

Can you hear but . . . just can’t always 

understand what people are saying? 

As we get older, high frequency hearing 

loss reduces our ability to understand speech. 

Here’s why . . . 

Research shows that nearly half the 

speech intelligibility is contained in 1000 to 

4000 Hz range, but contains a miniscule 4% 

of total speech energy. 

On the other hand, the low frequencies, 

125 to 500 Hz have most of the speech energy 

(55%) but contribute very little to intelligibility 

-- only 4%. 

To dramatically improve your ability to 

understand speech, you must: 

First, drastically increase the speech energy 

above 500 Hz, where 83% of the speech 

intelligibility is concen-trated. 

Second, drastically reduce speech energy 

below 500 Hz where only 4% of speech intelligibility 

lies. 


$ 12 95 

Ship Code A 

Plug 

in this 


Clear 

Tone TM speaker and 

bring out speech 

fidelity that you 

never knew existed. 

MFJ-281 restores 

the smooth sound of sinewaves that CW naturally 

generates and makes it easy to under- 

MFJ Amplified Mobile Speaker 

Perfect for mobile use -- great 

clarity and clear tones on CW 

and SSB -- excellent swivel 

mounting bracket! Has fused 

plug for the cigarette lighter socket 

of a base station power supply. 

Large 2 3 /4" speaker with a 3-inch 

fine metal mesh grill re-duces undesirable 

noise, static and hum. 6 watts output, 

8 Ohms impedance. 8 ft. cord, a 

3.5 mm mono jack plug with 13 foot 

cord, on/off power switch, gain control knob. 

Requires 12 VDC at 2 amps for maximum 

MFJ brings you ultra high quality communication 

audio with ham radio’s most 

advanced communication speaker. 

How? By using America’s most modern 

speaker design, advanced speaker cone and 

voice coil materials and construction, and a 

carefully crafted, accoustically-rigid cabinet. 

Handsome black cabinet measures 

5 1 /4Wx9 3 /4Hx6 1 /2D in. You won’t believe the 

clarity and depth of the audio when you hear 

the incredible improvements in speech intelligibility 

and CW tone. 4-in. full range speaker. 

It also reduces listening fatigue. It can literally 

transform your transceiver! 


$ 189 95 

The MFJ- 

616 splits the 

audio speech 

band into four 

overlapping 

octave ranges 

centered at 300, 600, 1200 and 2400 Hz. You 

can boost or cut each by nearly 20 dB. 

A balance control and separate 21 Ship Code B 

/2 Watt 

amplifiers let you equalize perceived loudness 

to each ear so both ears help. 

By boosting high and cutting low frequencies 

and adjusting the balanced control, speech 

that you can barely understand become highly 

MFJ Cleartone TM : Our most Popular Speaker 


$ 29 95 

Ship Code A 

stand and copy. 

The MFJ-281 ClearTone TM speaker was 

carefully designed to improve the intelligibility 

of speech in the frequency range of 600 to 

4000 Hz while reducing undesirable noise, 

static and hum. 

3-in. speaker handles 8 Watts. 8 Ohms 

impedance, has six feet of cord terminated 

with a 3.5 mm mono plug. 

Tiny, compact 3 3 /4x3x2 1 /4 inches, but powerful 

booming sound! 

MFJ Deluxe Communication Station Speaker 

The 

smooth, wide 

range response Ship Code C 

of the MFJ- 

385B gives you faithful 

reproduction with no hint 

of unwanted resonances 

and sound coloration. 

Speech becomes more 

intelligible and easier to 

understand. 

Pure sine wave tones 

of CW make copying and 

tuning in signals easier and faster. 

42 MFJ...The World Leader in Amateur Radio Accessories 

understandable! 

Even if you don’t have high frequency hearing 

loss, you’ll dramatically improve your ability 

to understand speech. 

QST for April, 2001 said “I expected a subtle 

effect at best, but I was astonished . . . The result 

was remarkably clean, understandable speech 

without hissing, ringing or other strange 

effects . . . made a dramatic improvement . . .” 

Immune to RFI. Has phone jack, on/off 

speaker switch, 2 inputs, bypass switch. 

10Wx2 1 /2Hx6D”. Needs 12 VDC. 

MFJ-1316, $21.95. For 110 VAC operation. 

Provides 12 VDC/1.5 Amps. 

MFJ-72, $69.80. All-in-one MFJ-616/618 

Accessory Pack. Includes MFJ-392B headphones, 

two MFJ-281 speakers and MFJ-1316 

power supply. Save $7! 

Dual Channel Speech Intelligibility Enhancer 

The new MFJ-618 has all of the 

speech-enhancing features of the 

MFJ-616 and gives you separately 

adjustable frequency channels for 

your left and right ears. 

This lets you compensate for deficiencies 

in your hearing that may be dramatically 

different for each ear. By equalizing 

the frequency response of both ears, you 

vastly improve speech intelligibility. 

The MFJ-618 Sound-Field Expansion TM 

MFJ Compact Mobile Speaker 

Enjoy 

superb audio 

and convenience 

with 


$ 19 95 

Ship Code A 

this economical mobile 

speaker. Matches 8 and 

4 ohm impedances. 

Handles 3 Watts. 30-in 

cord lets you get it to your rig’s speaker 

output. Tiny 2 1 /2x2x3 inches fits anywhere. 

Tough ABS plastic cabinet is built to last. 

volume, max 1 watt audio source. Powerful 

but compact -- 4 3 /4Wx3 1 /2Hx1 3 /4D inches. 


$ 39 95 


$ 219 95 

Ship Code B 

Tiny powerful 


CyberEarTM MFJ CyberEAR 

plugs in and 

loops over ear -captures 

and 

amplifies sounds by 12 dB! 

Extends your hearing range, helps you hear 

every word at hamfests and club talks -even 

if you’re on the back row! Great for 

eyeball QSOs. Volume control, on/off 

switch. For left or right ear. 3 interchangeable 

ear plugs. Flesh color -- hardly 

noticeable. Super lightweight -- 10 grams 

with battery! Includes batteries. Hear 

even better -- buy one for each ear! 30 day 

money back if not absolutely delighted. 

Not a hearing aid. 

TM adds a 3-dimensional 

spatial presence that can greatly improve speech 

intelligibility by up to an additional 3 dB. 

It’s like hearing and feeling the presence of 

a person directly in front of you. 10Wx3Hx 

6D”. 12VDC or 110 VAC w/MFJ-1316, $21.95. 

! 


$ 95 9 

Ship Code A 

Super CyberEAR TM 

Hear everything! 

Capture and amplify 

sounds up to 50 dB! 

Left or right ear 

plugs, volume control, extremely 

small. Not a hearing aid. 

Amplified ClearTone TM Speaker 


$ 39 95 

Ship Code A 


$ 9 95 

Ship Code A 

MFJ’s Deluxe 

ClearTone TM speaker 

is an excellent 1watt 

amplified 

speaker for many uses. 

The MFJ-382 gives superb, 

loud and powerful ClearTone TM 

audio. Speaker is 3-in. diameter. 

Adjustable from barely 

audible to high volume, this 

rugged speaker is sturdy and 

compact. All metal cabinet with rubber feet. 

3 1 /2x1 3 /4x4 1 /2 in. 9 volt battery (not included) 

or 110 VAC with MFJ-1312D, $15.95.

MFJ Noise-Canceling Filters Wipe Out Interference 


$ 199 95 

Ship Code B 

WIPE 

Out Noise! 

Wipe out noise and interference before it 

gets into your receiver with a 60 dB null! 

Eliminate all types of noise -- severe 

power line noise from arcing transformers 

and insulators, fluorescent lamps, light 

dimmers, touch controlled lamps, computers, 

TV birdies, lightning crashes from distant 

thunderstorms, electric drills, motors, 

industrial processes. 

It’s more effective than a noise blanker 

because interference much stronger than 

your desired signal can be completely 

removed without affecting your signal. 

It works on all modes -- SSB, AM, CW, 

FM, frequences from BCB to lower VHF. 

Null out strong QRM on top of weak 

rare DX and then work him! You can null 

out a strong local ham or AM broadcast 

station to prevent receiver from overloading. 

Use MFJ-1026 as an adjustable phasing 

network. You can combine two antennas to 

give you various directional patterns. 

Null out a strong interfering signal or 

peak a weak signal at a push of a button. 

Easy-to-use! Plugs between transmitting 

antenna and transceiver. To null, 

adjust amplitude and phase controls for 

minimum S-meter reading or lowest noise. 

To peak, push reverse button. 

Use built-in active antenna or an external 

one. MFJ’s exclusive Constant Amplitude 

Phase Control TM makes nulling easy. 

RF-sense T/R switch automatically 

bypasses your transceiver when you transmit. 

Adjustable delay time. 12 VDC or 110 

VAC with MFJ-1312D, $15.95. Measures 

6½X1½X6¼ inches. 


Like MFJ-1026 

less built-in active 

antenna, use external 

antenna. Same size, 

power requirements. 

MFJ Tunable, Programmable Brick Wall DSP Filter 

MFJ’s tunable super DSP filter automatically 

eliminates heterodynes, re-duces 

noise and interference simultaneously on 

SSB, AM,CW, packet, Amtor, PACTOR, 

RTTY, SSTV, WeFAX, FAX, weak signal 

VHF, EME, satellite. 

You get MFJ’s tunable FIR linear phase 

filters that minimize ringing, prevent data 

errors and have “brick wall” filter response 

with up to 57 dB attenuation 75 Hz away. 

Only MFJ gives you 5 tunable DSP filters. 

You can tune each lowpass, highpass, 

notch, and bandpass filter including optimized 

SSB and CW filters. You can vary 

the bandwidth to pinpoint and eliminate 

interference. 

Only MFJ gives you 5 factory pre-set 

filters and 10 programmable pre-set filters 

that you can customize. Instantly remove 

QRM with a turn of a switch! 

MFJ’s automatic notch filter searches 

for and eliminates multiple heterodynes. 

You also get MFJ’s advanced adaptive 

noise reduction. It silences background 

noise and QRN so much that SSB signals 

sound like FM. 

The automatic notch and adaptive noise 

reduction can be used with all relevant tunable 

pre-set filters. 

Automatic gain control (AGC) keeps 

audio level constant during signal fade. 

Tunable bandpass filters 

Narrow band signals like CW & RTTY 

jump out of QRM when you switch in 

MFJ’s tunable FIR bandpass filters. 

You can tune the center frequency from 

300 to 3400 Hz, and vary the bandwidth 

from 30 Hz to 2100 Hz -- from super-tight 

CW filters to wide razor-sharp Data filters. 

You can use two tunable filters together. 


All mode dual 

tunable filter lets you zero in and pull out your 

favorite stations and notch out interference at the 

same time. Two independently tunable filters let 

you peak, notch, low or high pass signals to eliminate 

heterodynes and interference -- even on the 

most crowded bands. Tune both filters from 300 

to 3000 Hz. Vary bandwidth from 40 Hz to almost 

flat. Notch depth to 70 dB. Works with any rig. 2 

For example, tune one to 

mark, one to space and set 

bandwidth tight for a super 

sharp RTTY filter. 


$ 279 95 

Ship Code B 

You can tune the lower cutoff frequency 

200 to 2200 Hz and the upper cutoff frequency 

1400 to 3400 Hz. This lets you 

create custom filters for voice, data and 

other modes. Signals just 75 Hz away literally 

disappear -- they are reduced 57 dB! 

Automatic notch filter 

MFJ’s automatic notch filter searches 

for and eliminates multiple heterodynes in 

milli-seconds. It’s so fast, that even interfering 

CW and RTTY signals can also be 

eliminated. Selectively remove unwanted 

tones using the two manually tunable notch 

filters -- an MFJ exclusive. Knock out unwanted 

CW stations while you’re on CW. 

Adaptive Noise Reduction 

Noise reduction works in all filter modes 

and on all random noise -- white noise, static, 

impulse, ignition noise, power line noise, hiss. 

The LMS algorithm gives you up to 20 

dB of noise reduction. Noise reduction is 

adjustable to prevent signal distortion. 

15 Pre-set filters, or customize 

Select from 15 pre-set filters. Use for 

SSB, AM, CW, packet, Amtor, Pactor, 

RTTY, SSTV, WeFAX, FAX or any mode. 

If you don’t like our pre-set filters, you 

can program your own -- an MFJ exclusive! 

Save center frequency/bandwidth, 

MFJ’s SSB/CW Audio Filters 

watts for speaker. Inputs for 2 rigs. Switch selectable. 

Switchable noise limiter for impulse noise 

through clipper removes background noise. OFF 

bypasses filter. Use 9-18 VDC or 110VAC with 

MFJ-1312D, $15.95. 10x2x6 in. 


The “Optimizer” switch 

selectable SSB/CW filter 

offers razor sharp filtering 

lowpass/highpass cutoffs, auto/manual 

notch, noise reduction -- all filter settings -in 

10 programmable filters. 

More MFJ DSP Filter Features 

MFJ’s tunable Spotting Tone TM -- accurately 

tunes even the narrowest CW filter. 

MFJ’s exclusive Adaptive Tuning TM -tuning 

rate automatically becomes finer as 

you narrow bandwidth -- makes narrow filters 

easy-to-use. 

MFJ’s exclusive FilterTalk TM -- sends 

precise filter settings in Morse code. 

Automatic notch with variable aggressiveness, 

quieter 2 1 /2 Watt audio amplifier, 

speaker switch keeps phones always active. 

Manual and auto notch can be used together. 

Noise reduction, automatic notch & 

custom filter saved in memory is selected. 

Accurate easy-to-use input level indicator, 

improved manual notch in the CW 

mode, adjustable line level output, more 

Mark-Space frequencies and baud rates for 

data filters and automatic bypass during 

transmit for monitoring CW sidetone, 

voice/data by sensing the PTT line. 

A push-button bypasses your filter -- lets 

you hear the entire unfiltered signal.2 1 /2 W 

amplifier, volume control, input level control, 

speaker jack, PTT sense line, line level 

output. Measures 9 1 /2x2 1 /2x6 inches. 

Plugs between your Xcvr or receiver and 

external speaker or headphones. 12 VDC 

or 110 VAC w/MFJ-1312D, $15.95. 

Cable Pack, MFJ-5184, $9.95. 

Includes receiver cable, DC cable, 2 

open-end TNC cables and power plug. 

Add DSP to any Multimode 

MFJ-781, $149.95. Add 

DSP filtering to any packet 

TNC or multmode TNC. 

with switch-selectable bandwidths (80, 110, 50, 180 

Hz centered on 750 Hz), steep-skirted SSB filtering. 

300-3000 Hz tunable 70 dB notch filter. Plug into 

phone jack. Speaker. Built-in 2-Watt amp. 

Headphone jack. Use 9-18 VDC or 110 VAC with 



Zero in SSB/CW with 

tunable peak/notch filters. 

Tune 300-3000 50 dB 

notch. 1 3 /4x4 3 /4x5 in. 


Multireader TM Taps Into Secret Signals 

Ever wonder what those mysterious 

chirps, whistles, and 

buzzing sounds are on the shortwave 

bands? 

Much of it is RTTY, ASCII, CW and 

AMTOR (FEC) signals passing commercial, 

military, diplomatic, weather, aeronautical, 

maritime, amateur and other traffic. 

Tap into these “secret” signals 

Plug this self-contained MFJ 

MultiReaderTM Ship Code B 

into your shortwave receiver’s 

earphone jack. Then watch these mysterious 

signals turn into exciting text messages as 

they scroll across an easy-to-read LCD display. 

No computer, interface, special cables 

or other equipment is needed. 

Eavesdrop on the latest breaking news as 

press agencies from all over the world relay 

them on RTTY -- it’s like having a private 

wire service in your home. Copy RTTY 

weather stations from Antarctica, Mali, Congo 

and many others. 

Listen to military traffic passing from 

Panama, Cyprus, Peru, etc. Catch diplomatic, 

research, commercial and maritime traffic. 

Listen to maritime users, diplomats and amateurs 

send and receive error free messages 

using various forms of TOR (Telex-Over- 

Radio). 

Monitor Morse code communications 

from hams, military, commercial, aeronautical, 

diplomatic and maritime coastal stations 

from around the world. 

There’s plenty of exciting non-voice traffic 

on shortwave that’ll keep you fascinated . . 

. traffic you can’t read unless you have a 

decoder. 

Printer monitors 24 hours a day 

MFJ’s exclusive TelePrinterPort TM lets 

you monitor any station 24 hours a day by 

printing their transmissions. Plug your Epson 

compatible printer into the MFJ-462B printer 

port and you’re ready to print. Save several 

pages of text in 8 K of memory for later 

review or re-reading. 



modem technology. Digs out weak signals 

buried in noise and even tracks slightly drifting 

signals. Mark and space tones are copied 

44 MFJ...The World Leader in Ham Radio Accessories 

to give you greatly improved decoding under 

adverse conditions. 

Easy to use, tune and read 

Just push a button to select modes and 

features from a menu. A precision tuning 

indicator makes tuning your receiver for best 

copy on all modes quick and easy. 

The 2 line 16 character LCD display has 

contrast adjustment. One line comes in at 

speed of signal, second line is delayed so you 

catch every exciting word! 

Copy most standard shifts and speeds in 

all modes. MFJ’s AutoTrak TM automatic 

Morse Code speed tracking helps MFJ-462B 

to track and decode high speed CW. 

MultiReader TM Accessories 

Use 12 VDC or use 110 VAC with MFJ- 

1312D AC adapter, $15.95. MFJ-462B measures 


MFJ-5162, $7.95. Receiver cable connects 

MFJ MultiReader TM to your radio’s 

external speaker (3.5mm jack). 

MFJ-5412, $11.95. Printer Cable is 25pin 

cable for Epson compatibles. 

MFJ-5163, $10.95. Speaker “Y” cable. 

MFJ-5300, $6.95. Three foot, 3.5 mm 

stereo extension cord with volume control. 

Can use for mono radio speaker output to set 

audio level to external devices. Has pocket 

clip for portable use. 

MFJ Shortwave Regenerative Receiver Kit 

Remember hunching over 

your regenerative receiver for 

hours with a pair of headphones 

pressing uncomfortably against 

your ears? 


$ 199 95 


$ 95 79 Kit 

Ship Code B 

You could hear just about anything that 

fancy superhets could hear. Sure, you had to 

play around with the regeneration control just 

right and have a steady hand to tune but you 

could hear ‘em. 

Don’t you wish you could relive some of 

this fun and excitement of your youth -- share 

some of it with your kids and grandkids? 

Well, you can -- with the MFJ-8100 World 

Band Shortwave Radio Kit. 

Spend a fun evening with your child or 

grandchild and help him put this simple kit 

together. When the two of you finish, watch 

his glow of excitement as he tunes the world 

bands -- just like you did -- and remember for 

life. It might inspire a career in electronics. 

This baby performs. It has an RF stage 

that really picks up the weak ones and it goes 

into regeneration smoothly without pops or 

dead spots. Stations all over the world will 

come in loud and clear with just a 10 foot 

wire antenna strung outside or across the room. 

With a 10 foot wire antenna, you’ll be 

amazed at what you can hear -- stations all 

over the world will come in loud and clear. 

Listen to international shortwave broadcasts, 

hams on SSB and CW, WWV, RTTY, 

MFJ-306, $109.95, 

turns your AM/FM car 

radio into a World 

Band shortwave 

receiver at the push of a button. 

It covers the entire 19, 25, 31, 

and 49 Meter international shortwave 

broadcast bands. Hear stations 

all over the world at various times -- 

Europe, Middle East, Asia, Australia, more! 

Easy to install -- Just unplug your car radio 

antenna and plug it into MFJ-306. Then 

insert the MFJ-306 cable into your radio 

antenna jack and connect 12 VDC. 5Wx11 /2H 

x31 MFJ-1213, 

$59.95, MFJ 

Computer 

Interface 

MFJ-306 Decoder 

$ 95 109 includes JVFAX 

Ship Code A and HamComm 

software on a 


3.5 inch disk. The MFJ-1213 $ 95 

receives and decodes multimode 69 

digital data with your receiver Ship Code A 

or transceiver. You can decode 

Color FAX/SSTV pictures, Baudot, ASCII, 

AMTOR, ARQ/FEC, SITOR, NAVTEX, 

/2D inches. Great for traveling! 

SHIP, SYNOP and more. 

packet and much more. Covers all or part of 

75/80, 49, 40, 30, 31, 20, 25, 22, 19, 17, 16, 

15, and 13 Meters in five bands. 

Range A covers: 3.51-4.31 MHz, Range 

B: 5.95-7.40 MHz, Range C: 9.56-12.05 

MHz, Range D: 13.21-16.4 MHz, and Range 

E: 17.6-22 MHz. 

Has vernier reduction drive, bandswitch, 

volume and RF gain controls, uses 9V battery 

and is built into a rugged aluminum cabinet. 

Two earphone jacks let you and your 

child or grandchild listen together with your 

Walkman style earphones or plug-in speakers. 

Measures 7Wx6Hx2 1 /2D inches. 

MFJ-8100K, $79.95. Shortwave regenerative 

receiver kit. You stuff the components, 

solder and assemble! 

MFJ-8100W, $109.95. Shortwave 

Regenerative receiver, wired and tested at 

MFJ and ready-to-operate! 

MFJ Shortwave Radio Communication Headphones 

MFJ-392B is perfect for amateur radio and 

shortwave radio listening. Great for all 

modes -- SSB, FM, AM, data and CW. 

Each earphone its own volume control. 

Superb padded headband and ear cushioned 

design makes listening extremely comfortable. 

You’ll forget they’re even on as you listen 

to stations all over the world! 

High-performance driver unit reproduces 

enhanced communication sound. Signals 

never sounded so crystal clear! 

Bring out speech fidelity you never knew 

existed. Has free 1 /4 inch phono adaptor. 

Has gold plated plug and cord. Super lightweight 

earphones (8 ounces) come with 9 feet 

of cord for roaming around. 

MFJ-392B handles 450 mW and has a fre- 

quency response of 20- 

20,000 Hz. 

Impedance is 32 ohms, 

sensitivity is 102 dB/mW. 

Works in stereo mode 

with 3.5 mm 

plug. Works 

mono with 1/4 

inch adapter. 

AM/FM SW Converter Computer Interface RTTY/CW Decoder 

MFJ-1214PC 

$ 169 95 

Ship Code A 


$ 24 95 

Ship Code A 


1214PC, 

$169.95 is 

a complete 

package, 

receives 

and transmits 

RTTY, ASCII, 

CW, also WeFAX 

weather maps with all 

16 gray levels. 

Complete package 

includes DOS only software, power supply 

and all cables needed. Perfect for use with 

older model computers.

Indoor Tuned Active SWL Antenna Covers 0.3 to 40 MHz 

MFJ invented the tunable active antenna! New technology uses cascode FET/bipolar transistor and a gigahertz bandwidth buffer 

MFJ invented the tunable active antenna! 

Numerous copies have been made without 

success -- including most recent ones. 

Why? Because MFJ has made continuous 

improvements where others have not. 

The MFJ-1020C has been completely 

redesigned with new technology. 

New technology uses a cascode FET/ 

bipolar transistor and a gigahertz bandwidth 

buffer. 

It improves gain and selectivity, 

reduces noise and intermod, and is NOT 

prone to self-oscillations that can severely 

damage your receiver. 

MFJ All-Band Preselector 

With the MFJ-1020C tuned 

indoor active antenna you’ll 

rival reception of outside wire 

antennas hundreds of feet long 

and pick up signals loud and 

clear from all over the world. 

World Radio TV Handbook 

says MFJ-1020 is a 

“fine value . . . 

fair price . . . best 

offering to date . . 

. performs very 

well indeed.” 

MFJ’s unique 

World Radio TV Handbook says 

MFJ-1024 is a “first rate, easy-to-operate 

active antenna . . . quiet . . . excellent 

dynamic range . . . good gain . . . very 

low noise factor . . . broad frequency coverage . 

. . excellent choice . . .” 

Mount it outdoors away from electrical noise for 

maximum signal and minimum noise. Has convenient 

mounting holes for easy installation. 

MFJ-1024 covers 50 KHz to 30 MHz. 20 dB 

attenuator, gain control, ON LED. 

Switch selects two receivers and auxiliary 

or active antenna. Control unit measures 

a compact 6Wx3Hx5D inches. 

Remote unit has a 54-inch telescopic 

whip, 50 feet of coaxial line and PL-259 


$ 159 95 

Ship Code B 

connector. Measures 3Wx2Hx4D inches. Use 12 VDC or 110 VAC 

with MFJ-1312D, $15.95. 


boosts favorite 

stations while 

rejecting 

images, intermod and 

phantom signals. 


$ 95 99 

Ship Code A 

Greatly improves reception from 0.15 to 

30 MHz, especially below 2 MHz. Tuner 

bypass/ground receiver positons. 2x3x4 in. 

tuned circuitry minimizes intermod, 

improves selectivity and reduces noise outside 

the tuned band. You can also use it as 

a tuned preselector with an external antenna. 

Covers 0.3 to 40 MHz including VLF, 

AM broadcast, all shortwave and all amateur 

radio bands. 

Has Tune, Band, Gain, On-Off/Bypass 

controls and SO-239 coax connectors. Use 

9 volt battery, or 12 VDC or 110 VAC with 

MFJ-1312D, $15.95. 6Wx2Hx5D inches. 

Includes telescoping whip. 

54” Active Outdoor Antenna Compact 0.3 to 200 MHz antenna 

MFJ’s new Passive Preselector has 

extremely high dynamic range! It 

improves the performance of nearly any HF 

or shortwave receiver/transceiver. It vastly 

improves the most expensive receivers. 

Especially helpful to those with broadband 

front-ends that are prone to overload. 

Protects your sensitive receiver input 

from damage (including switching diodes 

and attenuator resistors) caused by very 

strong signals from multi-transmitter, 

multi-band operation -- contests, field-day, 

nearby hams, CBers, TV/FM/AM stations. 

It eliminates phantom signals by suppressing 

strong out-of-band signals that 

cause intermod, blocking and cross modulation. 

Completely eliminates second 

order intermod problems. 

MFJ’s unique Hi-Q series tunable circuit 

gives you superb performance. 

The tunable series tuned circuit works 

into a very low impedance formed by 

broadband toroid transformers. 

Has narrow bandwidth, excellent stopband 

attenuation, very low loss, constant 

bandwidth and gain over each band. 

Excellent attenuation in adjacent bands. 

The entire 1.6 to 33 MHz HF band is 

covered in five overlapping bands. 

An air variable tuning capacitor, 1.8 to 

LW/MW/SW Preselector/Tuner 

Your ham band only antenna does 

great on the ham bands . . . but this 

MFJ all band active antenna will help 

you hear strong signals from all over 

the world from 300 KHz to 200 MHz -including 

low, medium, shortwave and VHF 

bands. 

Enjoy shortwave newscasts, ship-to-shore, 

airline, commercial RTTY and others. 

It also improves weak noisy scanner radio 

reception from high to low band VHF -- hear 

signals you couldn’t hear before. 

A J-310 FET handles strong signals and noiseless feedback circuit 

gives you excellent low noise reception. 4.5 GHZ MRF-901 

transistor lets you receive weak signals well into VHF. 

On/off switch, power on LED, SO-239 coax connector and 

detachable 20 inch telescoping antenna. 9 volt battery or 110 

VAC with MFJ-1312D, $15.95. Measures 3Wx1 1 /4Hx4D inches. 

High Dynamic Range Passive Preselector Can’t Overload 


$ 119 95 

Ship Code A 


$ 119 95 

Ship Code A 

Lets you copy weak signals. 

Rejects out-of-band signals, 

images. 1.8 to 54 MHz. Up to 

20 dB gain. Gain control. Uses 

a cascode FET/bipolar transistor for low 

noise, high gain. 20 dB attenuator. Connect 

2 antennas, 2 receivers. SO-239 connectors. 

Automatic bypass when when transmitting to 

125 watts. Jack for push-to-talk. 9-18 VDC 

or MFJ-1312D. $15.95. 


$ 69 95 

Ship Code A 

MFJ-1045C, $89.95. 

No attenuator, transceiver 

auto bypass, 

delay, or PTT. 


$ 69 95 

Ship Code A 

1 tuning range and a vernier reduction 

drive gives you precision tuning. 

Measures 7 1 /2x2 1 /2x3 1 /4”. 


Same as MFJ-1046 but adds an RF 

sense transmit/ receive switch with 

adjustable time delay to automatically 

bypass your MFJ-1048 when you transmit. 

Also adds PTT line T/R switching; 

connects between antenna and transceiver. 

Use 12 VDC or 110 VAC with MFJ- 

1312D, $15.95. 

Receiver Antenna Tuner/Preamp 

Don’t miss 

rare DX due to 

signal power loss 

between your 

receiver and 

antenna. The MFJ-959C provides 

proper impedance matching 

to transfer maximum signal 

from antenna to receiver. 


$ 119 95 

Ship Code A 

Covers 1.6 to 30 MHz. 20 dB preamp with 

gain control boosts weak stations. 20 dB 

attenuator prevents overload. Select from 2 

antennas and 2 receivers. Measures 9x2x6 

inches. Use 9-18 VDC or 110 VAC with 

optional adapter, MFJ-1312D, $15.95. 


MFJ-890 DX Beacon Monitor 

Get up-to-the-minute worldwide DX 

band conditions in minutes 

on 14, 18, 21, 24, 28 MHz 

bands using the International 

Beacon Network 

of 18 transmitters around the world! 

MFJ's DX Beacon Monitor lets you 

see which beacon you're hearing on your 

transceiver -- an LED lights on its world 

map to show you the beacon location 

and where to point your antenna. 

It's fascinating to hear and watch each 

beacon location light up as they become 

active across the world. Great for 

DXers, contesters, ragchewers and 

SWLers. 

The International Beacon Network provides 

a reliable source of signals for determining 

HF propagation 24 hours a day. 

It consists of 18 beacons around the 

world. Each beacon transmits on 14.1, 

18.11, 21.150, 24.93 and 28.2 MHz. The 

transmit sequence moves westward from 

New York across North America, Asia, 

Pacific to Africa, Europe, South America. 

On each frequency, each beacon trans- 


$ 159 95 

Ship Code A 


$ 119 95 

Ship Code A 

mits for ten-seconds -- its call sign at 22 

wpm CW and a one-second dash at 100 

watts and three one-second dashes at 10, 1, 

and 0.1 watts. 

When each beacon completes a transmission 

it goes silent on that band and 

switches to the next higher band. 

For more information see Oct/Nov, 1994, 

Sept, 1997 QST and Jan 1999, Sept/Dec 

2001, Jan 2002 Practical Wireless of U.K. 

The more beacons you hear, the more 

open the band is to different parts of the 

world. 

The more dashes you hear per beacon, 

the better the quality of propagation and the 

more robust the band is. If you hear the 

100 milliwatt dashes from many beacons 

you know the band is wide open! 

In just three minutes you'll know how 

band conditions are worldwide. 

You don't have to copy CW at 22 wpm 

to identify a beacon. As you hear a beacon, 

an LED instantly lights on a world 

map to show you its location. You can positively 

identify each beacon -- even if the 

signal is weak, fluttery or distorted. 

The MFJ DX Beacon Monitor has a 

built-in WWVB atomic clock receiver to 

provide ultra precise synchronization with 

the GPS-synchronized beacons. You also 

may manually sync the Monitor (the 

Monitor is not a receiver). 

MFJ-890 is a self-contained standalone 

unit. 6 3 /4Wx5 1 /4Hx3D”. Use 12 VDC or 110 

VAC w/optional MFJ-1312D, $15.95. No 

antenna/radio connection required. 

MFJ-890UK, $119.95 (for England). 

MFJ Micro ATV Transmitter 

Transmits Live Pictures on Cable TV Channels 

This tiny MFJ 

Micro ATV 

Transmitter TM lets 

you transmit a 

high quality 

Amateur 

Television video 

signal on 433.97 

MHz (cable 

channel 58, 59, 

or 60). All you 

need to do is 

plug in an antenna 

and a video 

source -- your 

camcorder, cam- 

era, VCR or other video source. 

With an antenna and a TV set (or down 

This 

super high 

performanceamateur 

radio 

ATV 

transmitter module is capable of putting out 

a whopping 4.5 Watts! The RF power output 

is controlled by an analog potentiometer 

from near zero output to 4.5 Watts maximum. 

Current draw varies with power 

level selected. 

converter/ TV) tuned to cable channel 58, 

59, or 60, you’ll have a complete ATV 

video station. 

The MFJ-8708 puts out a solid 50-100 

mW signal, capable of transmitting up to 

1.8 miles with a 3-element beam. By using 

a suitable UHF power amplifier and highgain 

antenna, you can enjoy two way ATV 

communications over many, many miles 

with fellow ATV hams. 

To transmit video simply connect video 

to the RCA phono connector and antenna 

to the BNC connector and connect a 9 volt 

battery or other 9 VDC source. 

You can use any standard NTSC or PAL 

composite video (1V pk-pk) source. 

The MFJ Micro ATV Transmitter TM can 

only be operated by a Technician class or 

Frequency control is provided by 

means of a digital integer-N, phase 

locked loop. Dual PLLs provide a frequency 

locked video carrier and an audio 

sub-carrier. Transmit frequency is selected 

via a four position dip switch. Four standard 

US ATV frequencies 426.25, 427.25, 

434.00, and 439.25 MHz on channels 58, 59 

and 60. 

Video modulation is accomplished by a 

12-bit digitally controlled DAC-digital to 

analog controller. A specially embedded 

software algorithm controls the modulation 

depth and pre-distortion level to deliver an 

ultra-clean video signal to the final RF amp. 

High power transmitting over 0.5 Watt 

higher licensed Radio Amateur. All transmissions 

must be directed to at least one 

other licensed Radio Amateur. 

MFJ-8708, 4 channel, cable channels 

58, 59, 60 and test channel. Weight only 

1 1 /2 ounces, less battery. Has audio and 

video inputs. 



$ 119 95 

Ship Code A 


cable channel 59 

video only. 

Weighs only one 

ounce, less battery 

(battery, quarter 

not included). 

MFJ 4.5 Watts ATV Transmitter 

Amazingly compact 2.35Wx2.8Dx.75H inches, but super powerful! 


$ 199 95 

Ship Code A 

output requires an external heatsink. When 

provided with an external heatsink, MFJ- 

8709 can be used for extended key down 

operation. Reverse polarity protected. 

RF power output: 4.5W Max, 50 Ohm 

Audio Subcarrier: 4.5 MHz 

Spurious Outputs: Better than -40dBc 

Phase Noise: -75 dBc/Hz @ 500 KHz 

DC power in: 12-13.5 V Max, (+/-100mV) 

Current Draw: 2.2 Amps @max output 

Frequency control: XTAL ref. to 4 MHz 

Frequency stability: +/-20 PPM 

Video In: Composite NTSC 1V P-P 

Audio In: Line level 200-250 mV RMS 

Operating Temp: -20 o to +85 o Celsius 

Size: 2.35Wx2.8Dx.75H inches

QRPocket TM CW Transceiver 

An Inside View 

MFJ-92XX, $249.95 is a bold new addition 

to MFJ's legendary QRP transceiver 

line, delivering 

unmatched six-band CW 

performance in a compact 

pocket-sized package. 

QRP radios have 

always been small in size, 

but thanks to direct-digital 

synthesis and microprocessor 

technology, the MFJ-9200 

represents a quantum leap over traditional 

designs with an unprecedented number of 

features for a very affordable price. 

The MFJ-92XX covers 80 through 15 

Meters using computer-modeled plug-in filter 

modules that yield no-compromise 

receiver performance and solid QRP+ transmit 

power (5 Watts plus) on every band. 

There's also built-in iambic keying with 

a manual-key sensor, a programmable CQ 

message, and seamless QSK T/R switching. 

DDS frequency control delivers rock-solid 

stability, precise 100-Hz readout, and eight 

memory channels per band. Plus, you get a 

New! 

MFJ-92XX 

$ 249 95 

Includes one band 

module of your choice. 

Additional plug-in modules 

are available for 80, 40, 30, 

20, 17, 15 M. 

BM15/BM17/ $ 95 29 BM20/BM30/ Each 

BM40/BM80 

choice of three main-dial tuning rates and 

RIT with 10-Hz tuning resolution. 

Other features include selectable IFbandwidth 

for monitoring SSB or CW, a 

20-dB front-end attenuator for overload 

protection, and a switched backlight for 

the LCD display. There's also plenty of 

receiver overlap for monitoring international 

short wave broadcasting. 

MFJ-92XX runs on any power source 

between 8 and 15 VDC and draws a miserly 

40 mA on receive with the display backlight 

turned off -- perfect for prolonged off-thegrid 

adventures. Best of all, the QRPocket TM 

Transceiver is the smallest and lightest 

backpack radio currently available. 

The MFJ-92XX QRPocket CW 

Transceiver TM comes complete with one 

band module of your choosing, and modules 

for the other bands are available at just 

$29.95 each. 80/40/30/20/17/15 Meters. 

Transceiver operation is intuitive, easyto-master, 

and clearly explained in an easyto-understand 

manual written by popular 

author and QRP Hall of Fame member Rick 

Littlefield, K1BQT. 

We all know working rare DX 

is exciting, but being rare DX 

is truly indescribable! 

Given the MFJ-92XX QRPocket CW 

Transceiver's diminutive size, features, wide 

coverage, and solid output, all of the ingredients 

are here to turn your next vacation, 

single person DXpedition or business trip 

into an adventure to remember! 

MFJ QRPocket TM CW Transceiver Accessories 

QRPocket TMAntenna Tuner 


Covers 80-10 Meters. 

Handles 25 Watts. Perfect 

for your QRPocketTM rig! 

Custom 12-position inductor 

switch, tune/bypass switch, 

antenna, transmitter capacitors, BNC 

feedpoints for antenna/transmitter. 

Tiny 4Wx25 /8Hx11 New! 

/2D” so it and your rig 

and antennas easily fit into a backpack or 

briefcase to take with you on your field 

day, DXpedition, vacation or business trip. 

Pocket TM 4:1 Balun 

MFJ-9211, $19.95. When 

using a balanced line antenna, 

don’t forget your 4:1 current 

balun. It has five 

way binding posts 

for your balanced 

line connection 

and a BNC output 

to your RIG. Tiny 

2Wx3Hx1D in. 

QRPocket TM Power 


Operate with your 

feet up. Miniature 

switching power supply delivers 

up to 40 Watts (13.8 VDC 

at 2.89A). 2 5 /8Wx1 3 /8Hx4 1 /8D”. 

New! 

QRPocket TM SWR/Wattmeter 


Read forward and reflected 

power in 3 ranges: 5, 30, 

100 Watts on a calibrated 

meter scale -- Plus read 

SWR and relative power at 

any level 0-5 Watts. Bruene-style 

bridge circuit detects both RF current 

and RF voltage to ensure uniform accuracy 

across a wide range of load impedances, 

frequencies and power levels. 1.8-50 MHz, 

BNC in/out. 41 /2Wx21 /4Hx23 New! 


Pocket TM Ground 


Place your rig near 

actual earth ground 

potential no matter 

where you are operating. 

Electrically places a far 

away RF ground at the rig. 

Hook rig ground, adjust counterpoise, 

tune for max current 

and operate safely 1.8-30 MHz. 

Mini Iambic Paddle 


Full-size feel for 

smooth, easy CW. 

Resilient phosphorous 

bronze, steel base, rubber 

feet. 3 ft. cord, 3.5 mm plug. 

BigEAR TM Dipole 


$179.95. 8band 

(7.0-55.0 

MHz) portable 

dipole, 34’ of radiating power! 

Robust 45-degree center block, 

heavy-duty components and our 

unique Hi-Q matching system 

gives you a “pair of ears” that 

digs out the weak ones. 

Comm. Headphones 


Lightweight stereo headphones 

give cushioned 

comfort and clear sound. 

Free 1/4 inch phono adapter, 

gold plated plug and cord. 

QRP WattMeter/Dummy load 

MFJ-9214, $29.95. Check 

your true QRP output power 

with this sensitive MFJ QRP 

Watt-meter. Has a built-in 50 

Ohm dry load for testing your 

rig. Gives reading to 5 Watts 

full scale from 1.8 to 150 MHz. 

Has BNC male that fits directly 

to your BNC radio input. Compact 

2Wx2 1 /4H x1 1 /2D inches. Fits in your pants 

pocket -- don’t leave home without it! 

MFJ-7737, $5.95. BNC female to PL-259. 

BigStickTMVertical MFJ-2286, $99.95. Eight 

bands, 7.0-55.0 MHz. 18’ 

long fully extended, but disassembles 

and collapses to 

28” in seconds! 8.5’ whip. 

Get true backpack portability 

-- lightweight, just over 2 

lbs. Includes pipe mount -quickly 

and easily mounts 

to 1/4 or 1/2” pipe or mast. 

See Page 72 for more info on MFJ-2289/2286 

New! 

Walkabout TM Antennas 

MFJ-1899T, $79.95. 80-6 

Meters,“wander-lead” loading 

coil, collapsible 52” whip. 

Mono band coverage: MFJ- 

1880T/1840T/1830T/1817T/ 

1815T, $24.95 to $29.95. 


MFJ 5-watt CW Transceivers 

New improved ultra-hot receiver...enjoy DXing or ragchewing wherever you go...brush up 

on CW and upgrade...no-compromise performance...at a trrrific price! 

Easy Operation: The most 

user-friendly radio you’ll ever 

own. Sets up in seconds -- no 

microprocessor mumbo jumbo. 

Great Sensitivity: New hotter-than-ever 

superhet receiver 

brings weakest signals in at full 

volume (super-quiet FET post 

amp stage in the IF filter makes this the best 

CW receiver going). 

Excellent Selectivity: Tight CW bandwidth 

crystal ladder filter fights unwanted 

QRM and noise to the maximum. 

Smooth and Stable VFO: Wide-spaced 

reduction drive VFO capacitor glides slowly 

across the easy-to-read dial. 

True RIT: RIT control has center-detent - 

- makes listening or calling off-frequency a 

snap! Easy on your Ears: Smooth AGC tracks 

only the signals you want 

to hear -- it never locks 

onto strong signals outside 

the audio bandpass. MFJ’s 

InstantRecovery AGC TM 

snaps the receiver back at 

full gain after transmitting. 

Built-in speaker: High 

efficiency 3” speaker driven 

by 100 mW of audio 

gives great volume. 

Rugged Transmitter: 

Motorola power amplifier 

transistor delivers full QRP 

output, tolerates opens and 

accidental shorts without 

damage. 

Sinewave Sidetone: 

Pure 700 Hz CW sidetone 

makes sending as much fun 

as receiving! 

MFJ-9040/9030/9020 

MFJ-9017/9015 

$ 209 95 

Each. Choose band. 

Ship Code B 

Semi-QSK: Set adjustable hold transmit/ 

receive switching to suit your normal sending 

speed or set it for full QSK during contests. 

Easy to Power: It uses little power -only 

50 mA average on receive and 1.2 amp 

peak on transmit. Perfect for battery operation 

in remote locations! 

Rugged Construction: MFJ CW radios 

are built on G-10 double-sided plate-through 

PC boards in our plant. Rugged all-metal 

cabinet with brushed aluminum front panel 

and vinyl clad cover. 

Frequency Coverage: 

Integrated CW Station 

Radio, tuner, power pack fasten together to 

form a tiny 6X6.5X8.5-in. integrated CW 

station. 

$384.80 buys 

a complete CW 

station. Includes 

CW transceiver, 

$209.95; MFJ-971 

tuner, $119.95; 

MFJ-4114 power 

pack, $79.95; 

portable antenna, 

$39.95 . . . . order: 

MFJ-9140B, 40M; 



MFJ-9117B, 17M; MFJ-9115B, 15M. 

$ 449 80 if purchased separately. 

MFJ-27, $6.95, carry handle. 

MFJ QRP- 

CubTM Kit, Ship Code A 

Transceivers 

use surface mount technology to 

achieve big performance in a pocket-size. 

The kit version has all SMT parts mounted 

and soldered. You just insert and solder the 

“through-hole” parts such as the connectors, 

inductors and trimmer caps. 

Designed by QRP-ARCI hall-of-famer 

K1BQT for real world low-power operating 

conditions. Buy all or choose from 80, 40, 30, 


Portable AC power supply. 

Connect to MFJ 

radios. LED indicates 

when power is applied. 

Output is approximately 

13.8 VDC at 1.2 amps. 


CW option kit for your MFJ-9406 six meter 

and your MFJ-9402 two meter adventure 

transceivers. 

MFJ-726, $49.95. Narrow audio filter built 

for MFJ CW transceivers. 

Choose your 

favorite band! 40 & 

15 Meter models cover 

Nov- ice and TechPlus 

band segments -makes 

a perfect “first 

radio” for new 

upgrading hams. 

MFJ-9040 covers 

7.000-7.150 MHz; 


10.100-10.150 MHz; 


14.000-14.075 MHz; 


18.068-18.110 MHz; 


21.000-21.200 MHz. 

Hip-pocket size QRP Cub CW transceiver 

MFJ-93XXK 

$ 99 95 

Save $! 

20, 17, or 15 Meters. Specify band in “XX” 

area of model number. 

Hot receiver with 0.2 uV sensitivity, low 

noise, sharp passband crystal filter, 

Differential mode AGC, rock steady, over 80 

dB signal range, robust AF output, 2 Watts 

thru 20 Meters, 1 Watt 15/17 Meters. 

Power adjustable to zero, full QSK for 

smooth break-in, natural sidetone, shaped 

keying, custom TX offset, receiver passband 

center, low power drain. Tiny 

3 3 /4Wx1 1 /2Hx4 1 /2D inches. Wired unit covered 

by MFJ’s No Matter What TM warranty. 

MFJ-93XXW, $ 149 95 . Wired & tested cub. 

Specify band in “XX” portion of model #. 

Portable and QRP Power Supplies and Accessories 


AC Power 

supply/Battery Pack 

uses Ni-Cd D cells 

or alkaline D cells 

(not included). 

Matches MFJ radios. Output is 13.8 VDC at 

1.2 amps. Voltage regulated. Ni-Cd charge 

circuit. 

MFJ-412, $49.95. Curtis Chip Iambic Keyer 

Module for your MFJ 90 Series Transceivers. 

Use your MFJ paddles with the MFJ-412 and 

your transceiver for complete CW fun! 


Great SSB/CW Accessories 

for your 

90 Series MFJ Transceivers 

MFJ-902B, 

$109.95. Tiny 

Travel Tuner, 

41 /2x21 Now with 6 Meters! 

/4x3 

inches, fits in 

the palm of 

New! 

your hand! 

Handles a full 150 Watts, covers 80-6 

Meters, has tuner bypass switch, tunes 

nearly anything! Perfect for backpacking, 

traveling, camping, etc. Great for 

rigs like IC-706MKIIG, Yaesu FT- 

100D, Kenwood TS-50. See page 10! 

MFJ-971, $119.95. 200 Watt PEP 

Antenna Tuner also has 6 Watt range 

setting for QRP. Covers 1.8-30 MHz. 

4:1 Toroid Balun is built in for balanced 

lines. Stackable with your MFJ- 

90 Series Transceivers. See Page 9! 

MFJ-561, $24.95. Miniature lightweight 

iambic paddle is just 13 /4Wx13 /4 

D 3 /4H inches and weighs just 21 /2 

ounces -- tiny enough to fit in an 

Altoids (R) tin (cord and all!) -- great for 

traveling with QRP or “big” rigs! 


$69.95. Ham 

radio’s tiniest 

electronic keyer 

with built-in 

iambic paddle! 

It’s a nano-size 

2x3x1 inches and weighs just 31 /2 

ounces! Speed adjusts 5-65 WPM, 

weight 25-75%, has Iambic mode A or 

B, normal or “bug” mode and reverse. 

Folded Dipole Portable Antennas 

Single band, 

lightweight, 

folded dipoles 

are perfect for 

MFJ QRP rigs. 

Low SWR, direct coax feed, 200 Watts. 

$ 39 95 each! 

Perfect for MFJ Rigs! MFJ-1774B (40M); 

MFJ-1773B (30M); MFJ-1772B (20M); 


MFJ-1770C (10M); MFJ-1776B (6M).

HF SSB Travel RadiosTM are Feature-Packed 

...the most powerful 12 watt radios you’ll ever own ... hot receiver ... potent speech processing ... 

rugged transmitter ... proven on-air design ... real alalog S-meter ... powerful audio 

Turn on your new MFJ SSB transceiver 

and you’ll marvel at how well it performs. 

Weak stations roll in with surprising clarity, 

faithfully reproduced by a single conversion 

receiver. On transmit, MFJ’s exclusive 

ConstantCurrent TM speech processor cuts 

through noise and QRM like a far more complex 

radio. 

Take this performance along on your next 

vacation or business trip -- the MFJ transceiver, 

microphone, power supply, and antenna can 

easily fit into your brief case or carry-on bag. 

Simple operation: No microprocessor 

mumbo-jumbo -- on the air in minutes! 

Great sensitivity: Features a quiet double 

balanced mixer front-end, single conversion 

clarity and plenty of gain. If a signal is there, 

you’ll get it loud & clear! 

Analog S-Meter: A real calibrated S-meter 

-- not a useless bargraph -- that makes adjusting 

an antenna tuner or finding the best beam 

heading clear-cut. 

Excellent Selectivity: 

Eight poles of tight IF filtering 

cuts adjacent chatter 

and focuses transmitter 

power where you need it. 

Smooth VFO: No 

annoying synthesizer jump 

or obscure keypad commands 

to deal with. 

MFJ-9417/MFJ-9420 

MFJ-9440/MFJ-9475 

$ 259 95 

$269.95 with mic 

Ship Code B 

Effortless tuning, custom reduction-drive ballbearing 

capacitor. 

Powerful audio: Big audio -- even in 

noisy locations from a special Signetics audio 

chip and rugged 3 inch speaker. One Watt 

MFJ SSB Adventure Radios MFJ-1762, $99.95. 3-element 6 


$ 95 309 

($319.95 with MFJ-290 mic) 

Ship Code B 

Choose from 2/6/10/12 Meters! 

MFJ-9406 for 6 Meters -- the 

magic band -- can economically 

open to you the exciting propagation 

at 50 MHz, not to mention 

local ragchews. 

. . . And you can take this little 

set anywhere . . . on top of mountains, 

down cool streams, overseas, 

on your bicycle trip, campgrounds, 

etc. 

Your little MFJ Adventure 

Radio can combine with your 

other outdoors hobby for an even 

more enjoyable experience! 

You get full coverage of 50.0 

to 50.3 MHz with power output 

of 10 Watts PEP. 

MFJ-9402, 2 Meters operates 

SSB and (optional) CW with 7 

Watts output, 144.0-144.3 MHz. 

MFJ-9410, 10 Meters packs 

20 Watts SSB PEP output. You’ll 

be amazed at the clarity of its 

receiver. Covers 28.3-28.6 MHz. 

MFJ-9412, New Adventure 

Radio for 12 Meters. 20 Watts 

SSB and CW PEP output and 

covers 24.890-24.990 MHz. 

Adventure radios are easy to 

operate: just turn on and go! 

They all sport MFJ’s exclusive 

ConstantCurrent TM syllabic 

speech processing for an added 4 

to 6 dB of punch. 

All four Adventure radios fea- 

New! 

12M Model 

. . . take on 

mountain 

tops, down 

cool streams, 

overseas, on 

your biccycle 

trip, etc. . . . 

MFJ-9406/9410/9412 

$ 95 279 

($289.95 with MFJ-290 mic) 

Ship Code B 

ture single-conversion superhet 

receivers wth a low-noise front 

end and double-balanced mixer to 

fight intermod and dig deep, and 

a 2.3 kHz crystal ladder filter. 

All Adventure radios include a 

built-in low pass filter to help 

avoid TVI. 

You also get real analog Smeters 

that double as speech processing 

level monitors, analog 

tuning with no unexpected rate 

shifts or stair-stepping, powerful 

one-half watt of audio from their 

3 1 /2 inch top-mount speakers, and 

a solid-state FET switch to key an 

external amplifier. 

They’re energy efficient, operating 

from a 2 amp AC supply 

(3A for the model 9410) or from 

a 12 volt battery. 

MFJ-416, $49.95. Optional 

CW module for Adventure rigs. 

Adventure Radios are built-tolast 

through conservative design, 

premium quality, plate-through 

PC boards, quality components, 

handsome brushed-aluminum 

faceplate and tough cabinets. 

Fit an Adventure Radio just 

about anywhere: each is just 

2.5X6.5X6 inches. 

Special offer -- add an MFJ- 

290 microphone for just $10 

more. 

New 17M Model! 

audio output at 10% THD. 

Low Current Requirements: You’ll 

never have to lug around a heavy power 

supply to run this radio. 

Rugged Transmitter: Bullet-proof output 

transistor runs cool, easily tolerates 3:1 

VSWR and feedline shorts or opens. 

Built to last: Conservative design, plate- 

through PC board, quality components, 

handsome brushed-aluminum panel and a 

tough vinyl clad case ensure years of 

dependable service. 

New! MFJ-9417 covers 18.08-18.17 MHz. 

MFJ-9420 covers 14.150-14.350 MHz. 

MFJ-9440 covers 7.150-7.300 MHz. 

MFJ-9475 covers 3.750-4.000 MHz. 

Draws 50-100 mA on receive and 1.2 

amps peak on transmit at 13.8 VDC. 

21/2x6 1 /2x6 inches. 

MFJ-415B, $49.95. Install this CW module 

and operate CW, a must for DXers. 

Provides semi-QSK break-in and sidetone. 

MFJ Adventure Accessories 

Meter yagi quadruples your effective 

radiated power over a half-wave 

dipole. 6 foot boom, 2 lbs. Can use 

TV rotator and mast. Handles 300 

Watts PEP SSB. Mounts vertically or horizontally. Current balun 

decouples feedline. Great front-to-back ratio. 

MFJ-1756, $99.95. Omni-directional low-angle vertical 

radiator lets you work plenty of DX in all directions 

even with low power. GroundIsolatedTM radial 

system eliminates common mode current paths. 

Reduces undesirable feedline/supporting structure 

radiation. 55-inch. strong aluminum radiator. 

New! MFJ-1896, $69.95. 6-Meter 

Moxon antenna for limited space 

features low SWR and a broad 

cardioid pattern with 5.5-dBi forward 

gain, high front-to-back ratio. Element span is a compact 7 feet 

on a 34 inch boom with a turning radius of under 4 feet. It’s winter-storm 

tough but extremely lightweight, under 5 lbs. Handles 1 

kW. Feedpoint is an SO-239 pigtail. It's the perfect choice for 

getting on the "magic" band as the sun spot count rises and legendary 

band openings return. Also, it’s your best choice to take 

on those exciting mountain-topping and rover adventures! 

Handles 

1kW! 

MFJ-1736, $29.95. Hang this 6 Meter J-pole in the clear. 

Omni-directional full size 1/2 wave antenna 

with low angle radiation beats 1/4-waves. 

MFJ-1776B, $39.95. Low SWR 6-Meter folded 

dipole. MFJ-1770B, $39.95. (10 Meters). 

MFJ-906, $99.95. 6 Meter antenna tuner with lighted 

cross-needle meter (with MFJ-1312D, $15.95). 

100 Watts FM, 200 Watts SSB PEP. MFJ-903, 

$69.95, Same as MFJ-906, less meter (See Page 6). 

Mirage A-1015-G 150 watt ouutput 6-meter 

amplifier with built-in GaAs FET receiver preamp. 

$389. See page 134 for full description. 

MFJ -290 dynamic handheld mic for all 

MFJ SSB Adventure RadiosTM , $39.95 

when ordered separately. 

MFJ-4110 Portable AC Power Supply, 

$59.95, fits in your pocket and is a perfect 

companion for your radio-on-the go. 

13.8 VDC output at 1.2 Amps. 

MFJ-4114 Rechargable AC Power Supply, 

$79.95, with battery pack uses Ni-Cad D cells or 

alkaline D cells (not included). Switch-selectable 

AC or batteries. Output 13.8VDC, 1.2A. Page 31. 

MFJ...The World Leader in Ham Radio Accessories 49

MFJ Sound Card-to-Rig Interface 

MFJ-1279/M/T 

$ 139 95 

Ship Code B 

Plug this sound 

card interface 

between your rig 

and computer and 

operate all digital 

modes. 

Everything you 

need is included -software, 

audio 

cables, RS-232 serial 

cable and AC power supply. More software 

programs available (below right). 

Provides fully automatic operation 

with audio and push-to-talk control. 

Matches sound card audio, eliminates 

ground loops and provides mic override. 

Models for all radios with 8-pin round 

(MFJ-1275/1279), 8-pin modular (MFJ- 

1275M/1279M) or 4-pin round (MFJ- 

1275T/1279T) microphone plugs. 

Operate PSK-31, packet, APRS, 

Amtor, RTTY, SSTV, CW, high-speed 

CW Meteor Scatter and others. Use as 

Contest Voice and CW Memory Keyer. 

Select the ON digital mode -- all connections 

are made between your rig and computer 

for digital operation. Select BYPASS 

-- rig and computer for normal operation. 

Audio isolation transformers and relays 

eliminate ground loops, audio hum, noise 

and distortion. Extensive RF suppression, 

line isolation eliminates RF problems. 

Transmit mic audio at any time by 

pressing PTT to override digital modes -great 

for SSTV and Contest Voice Keyer. 

Serial port -- lets computer control radio 

to override/interrupt digital transmissions. 

VOX Control -- lets you use VOX control 

when not using computer serial port control. 

Level Controls are for transmitter 

drive and for receiver-to-sound card drive 

MFJ-1272 switches your TNC or Microphone by simply pushing a button 

8-Pin Modular 

(RJ-45) 

Mic Plug 

levels. 

A front panel switch selects left, right, or 

both sound card audio output channels to 

accommodate various programs. Selectable 

positive logic or negative logic COR input - 

- provides EchoLink interface. Off-the-air 

recording -- for replaying or for use with 

spectrum analyzer programs. 

Monitor on/off switch lets you have a 

normal QSO and receive SSTV pictures at 

the same time in the “monitor on” position. 

This is great for modes like SSTV and Voice 

Keyer operation that may require listening 

to receive audio during operation. 

Internal jumpers set internally for any 

model radio -- no soldering required. 

The Original MFJ-1275 Soundcard 

Interface 

Everything 

you need to operate digital 

modes with your computer 

soundcard. Cables, 

Software/shareware and power 

supply are included. 

plug in your TNC every time you want to 

work digital modes. 

Just plug these pre-wired cables into 

your rig’s mic connector and into your 

TNC and you are ready to go -- no more 

hunting for hard-to-find connectors and 

wiring up complicated cables -- no more 

50 www.mfjenterprises.com 

MFJ-1275/M/T 

$ 109 95 

Ship Code B 

Basic Digital Interface 

Soundcard, radio, speaker, 

RS-232 jacks. No external 

power needed. No mic jack/ 

mic switch. MFJ-1273B, 8 

pin round, MFJ-1273BM, 

8-pin modular, and MFJ- 

1273BT for 4-pin round mic. 


$ 59 95 

MFJ-1279 Super Soundcard Interface 

adds the following unique features: 

• Auxiliary Input Jack: Switch soundcard 

from MFJ-1279 to use soundcard for 

something else. No more plug and unplug! 

• Direct CW/FSK Keying Jack: Allows 

direct CW/FSK keying operation. 

• Headphone Jack: Use stereo headphones 

-- also turns off external speaker. 

• Footswitch jack: Use footswitch (not 

included) for PTT when not using VOX. 

MFJ-5429, $24.95. Allows MFJ soundcard 

interface to be used with USB port 

computer. DB9M RS232 to USB 1.1 with 

driver. Supports98/98SE/ME/2000/XP. 

DSP Sound Card Programs 


RadioCom5 -- Has all 

features of RadioCom4 

plus DSP audio filter 

and spectrum analyzer, 

dual scope display, 

sound recorder, time, frequency management 

and analyzer, 3D scanner, satellite tracking, 

more! Not compatible with Vista. 

MFJ-1299, $199.95. RadioCom6 -- All 

features of RadioCom4/5 plus remote control 

of 2 radios, up to 6 decoders per radio, only 

one sound card needed, level converter 

included. Requires Intel Pentium/Celeron 

with at least 1 GHZ, 256 MB RAM, a bidirectional 

sound card with line-in port, a 

spare Com port, and either Windows 

2000/XP/Vista or higher installed with graphics 

card, 1280x1024 16-bit color resolution. 

with the 8-pin round mic plugs, select “B” models. 

For radios with the 8-pin modular (RJ-45 

modular, phone type plug), select “M” models. 

Plug-in jumpers let you quickly set-up for 

virtually any radio. Factory set for Kenwood 

and Alinco. Includes easy-to-follow instructions. 

Has audio-in and speaker jacks. MFJ- 

1272 series measures a tiny 3 1 /4x1 1 /4x4 in. 

plugging/unplugging to 

work voice/packet! 

TNC All MFJ TNCs/PK900 

Radio TYPE PK12/PK96/PacComm 

Works with HF, VHF and Mic Conn Other TNC2 compatibles 

Switch between your TNC 

UHF rigs with 8 pin round or 8 8 pin round 

Multimode Packet Controller or Microphone 


pin modular mic connectors -- mic plug 

by simply pushing a button! 

Kenwood, Icom, Yaesu, Alinco, 8 pin modu- 

You won’t have to unplug your mic and Radio Shack, others. For radios lar mic plug MFJ-1272M 

KAM VHF 

KAM HF / KPC3 

KP9612 

MFJ-1272BYV 

MFJ-1272BYH 

MFJ-1272MYV 

MFJ-1272MYH 

AEA 

PK-232 

MFJ-1272BX 



Five foot cord plugs 

into sound card on 

the back of your 

computer. Provides 

at your fingertips, 

jacks for speaker, 

microphone and headphone 

and gives you speaker volume 

control, speaker/headset 

switch and microphone on/off 

switch. 3Wx2Hx3 MFJ-1272B/M 

$ 95 49 Ship code A 

8-Pin Round 

Microphone 

Plug 

MFJ RS232 to USB Adapter and others 



DB9 Male RS-232 

Use computer USB 

Serial Port to USB 

port to print on a para- 

1.1 port adapter 

llel printer. 6 ft. cable, 

cable. Includes a driv- 

USB/DB-25 Female. Driver incl. 

er for Win98/ME/ 

2000/XP/Vista on a 


3.5 inch floppy disk. 

$24.95. Same as 

Use this to connect serial port 

MFJ-5427, but has 

devies to a computer with no 

USB and Centron- 

serial ports. 

ics 36 Male. Driver included. 

Six Foot USB Cables 


USB A Male to USB B 

Male, 6 foot cable, beige color. 

Audio Extension Cable 


3 foot, 3.5 mm 

stereo extension 

cord with volume 

control. Can use 

for headphones on radio speaker 

output to set audio level to 

external devices. Has pocket 

clip for portable use. 

Soundcard Extension 

/4D inches.

TNC-X -- An Inexpensive TNC for VHF Packet and APRS! 

TNC-X is a low-cost, low power TNC 

currently deployed in thousands of locations 

all over the world. Just connect your FM 

radio and your computer and the world of 

digital packet radio is yours to enjoy. TNC- 

X is a self-contained TNC, not a computer 

sound card interface that ties up your computer’s 

resources. 

TNC-X is a KISS mode TNC. It works with every 

packet radio software program that supports KISS mode. 

These days, that makes it compatible with almost everything 

in packet radio. And unlike some other TNCs, you 

never have to worry about it “accidentally” falling out of KISS 

mode. KISS mode makes it extremely simple to use. There are no 

complicated menus of parameters to adjust. You just plug it in and 

it works! 

TNC-X is a genuine USB TNC, not a TNC with an outboard 

serial to USB converter added to it. As a result, when you plug it 

into a USB port on your computer, it derives its power from the 

USB port. You need not provide a separate power connection. For 

those who want to use it with older computers, it also supports a 

separate conventional serial port. You can even switch back and 

forth between USB and serial if you like. TNC-Xs USB port works 

with all major computer operating systems including Windows (all 

versions after 95, including 64-bit), Mac OS X (as well as Mac OS 

8 and 9), and Linux. 

TNC-X beats the competition in decoding packets from poorly 

adjusted transmitters. You get a built-in active audio filter in front 

of the TNC’s modem to clean up analog signals before they are digitized, 

substantially improving demodulation performance. TNC-X 

also supports true software DCD. You can leave the squelch of the 

radio connected to TNC-X open for very fast transmit/receive turnaround 

times. 

TNC-X is a natural for emergency communications and is being 

used in this application across the country and around the world. It 

is fully compatible with Winlink 2000 both on the server side and 

Alinco8 /Strd HT 

Icom1 /Yaesu/ 

RadioShack HTs 

Kenwood2 HTs 

Yaesu R-Series HT 

Yaesu 8-pin 

Icom3 8-pin 

Kenwood/Alinco 

8-pin 

Yaesu 

8-pin modular 

Icom4 KAM VHF 

PK-232 

PK900/PK96/ 

PK12/DSP232 

/PacComm/ 

other TNC-2 

compatibles 

8-pin modular 

Kenwood 

8-pin modular 

Radio Shack 

8-pin modular 

5 / 

KAM HF5 / 

KPC35 / 

KPC96125 TNC to Radio 

Prewired Cables Pre-Wired Radio-to-TNC Cables 

$ 95 Take all the hassle and soldering out of wiring 

17 Ship code A your rig to your TNC with prewired radio cables. 

Radios 

TNC 

TYPE 

All MFJ 

TNCs and 

Multimodes 

MFJ-5022 MFJ-5022YV MFJ-5022X MFJ-5022 

MFJ-5024 MFJ-5024YV MFJ-5024X 

MFJ-5026 MFJ-5026YV 


MFJ-5020 MFJ-5020YV MFJ-5020X MFJ-5020R 

MFJ-5080 MFJ-5080YH MFJ-5080X MFJ-5080 



MFJ-5084YH 

MFJ-5086YV 







MFJ-5080M 


MFJ-5084MX MFJ-5084M 

MFJ-5088MYV MFJ-5088MX MFJ-5088M 

1. does not include IC-W2A 

4. does not include IC-100H, IC-2700H 6. YV for KP9612 1200 baud port 

2. does not include 2500 

5. YV for KAM VHF port, YH for KAM 7. YH models for KPC9612 9600 baud port 

3. does not include 25A, 255A 

HF port. Other Kantronics use YV 

8. Excludes DJ-100, 120T, 200, 500 









MFJ-5082, $11.95. 8 pin round mic. 

MFJ-5106, $6.95. 6 pin mini DIN. 

MFJ-5205, $6.95. 5-pin DIN. MFJ TNC. 

MFJ-5208, $11.95. 8 pin DIN. Acc. Port. 

MFJ-5213, $11.95. 13-pin DIN, Acc port. 





Pre-wired Accessory Port-to-TNC cables . . . $ 21 95 

TNC MFJ TNC/MMC 

Radios TYPE PK900/PK12/DSP232 

ACC Port /PacComm/TNC2s 

ICOM HF 

8 Pin DIN MFJ-5063 

ICOM VHF 

8 Pin DIN MFJ-5064 

ICOM 706 

13-Pin DIN MFJ-5065 

KENW/YAESU, 

AZDEN VHF 

6-Pin mini DIN 


KENW HF 

13-Pin DIN 


KAM VHF 

KAM HF 

KPC3 







KPC-9612 

----------- 




------------ 

Open End Cables with Radio Connnectors 

MFJ-5220, $11.95. Yaesu FT-50R cable. 

MFJ-5222, $11.95. Split conn. Alinco. 

MFJ-5224, $11.95. IC/YA/AL/RS HTs. 

MFJ-5226, $11.95. Kenwood Handhelds. 

MFJ-5268, $11.95. 8 pin modular mic. 


$ 129 95 

Ship Code B 

on the client side. Just specify KISS mode in 

your PacLink MP or RMS software and you’re 

ready to roll! . . . or better yet . . . 

TNC-X is perfect for APRS TM . It is fully 

supported by virtually every APRS TM mapping 

program in use today. It provides a truly low 

cost mechanism for mapping the locations of 

other amateur radio stations. 

TNC-X contains an expansion header that allows you to 

add daughter boards to provide entirely new capabilities. 

Add an X-Digi board and convert TNC-X into a modern, 

remotely configurable digipeter (see below). With TNC-X, 

you only buy the capabilities you need. You don’t to pay for features 

that you will never use. Measures 5 1 /8Wx1 1 /2H3 1 /4D inches. 

Plug-and-play . . . it’s compatible with all of MFJ’s TNC to 

radio cables (below), as well as MFJ’s A to B USB cable. 

MFJ-1270DG, $29.95. 

X-Digi is an inexpensive board that plugs into TNC-X’s 

expansion header and makes it into a stand-alone full-featured 

digipeter. It supports the new WIDEn-N paradigm 

for APRS TM digi-peters, or can act as a general purpose digipeter. 

When operating as an APRS TM digitpeter, X-Digi has the capability 

to trap and eliminate duplicate position reports, substantially 

reducing congestion on APRS TM frequencies. It has the capability of 

sending up to four different beacons, each with its own text, and 

each at its own transmission interval. 

Together TNC-X and X-Digi consume very little power (less 

than 25 mA). In a pinch, you can power TNC-X and X-Digi all day 

long on a 9-Volt battery 

X-Digi is remotely configurable over the air. You can change virtually 

every digipeter parameter without ever having to revisit your 

remote site. Password protection ensures that no one else will tamper 

with your digi’s settings. 

Your X-Digi will never be obsolete. New firmware will be made 

available for free by the internet. No special equipment is required 

to flash the updated code into your X-Digi. 

MFJ PacketOnly TM Transceivers 

Why tie up your expensive 2-Meter 

rig on a single packet channel? Enjoy 

dedicated high quality packet 1200 to 

9600 baud on 2-Meters, 24-hours-a-day! 

MFJ’s data radios are compatible with 

all TNCs with hardware DCDs and 

most TNCs with software DCDs. It couldn’t be easier -- just plug in 

appropriate cable, your antenna, 12 VDC and you’re ready to go! 

MFJ-8621A, $189.95. Ready to operate on 145.01 MHz. 

MFJ-8621AX2, $199.95. Ready to operate APRS on 144.390 MHz. 

MFJ Cigarette Lighter Cable 

Plug in your favorite accessories and operate off your auto’s 12 

VDC cigarette lighter socket with 3A fuse. Has 2.1 mm DC 

coaxial plug. Or operate from your power supply in the shack! 

Provides power to your MFJ analyzer, keyer, meter or tuner 


$ 9 95 

Ship code A 

lamp, etc. Make quick adjustments to HF/ VHF/ 

UHF mobile antennas with your analyzer in hand! 

18” retracted curly cord, 60” fully stretched. 

Pre-Wired Radio to Computer Interface 

MFJ-5383 Convenient pre-wired transceiver to computer inter- 

(I, K, Y, YB) face cable has serial interface built-in! MFJ-5383K, 

$ 95 59 Kenwood and compatibles. MFJ-5383I, Icom and 

Ship code A compatibles. MFJ-5383Y for Yaesu standard 6-pin 

DIN. MFJ-5383YB for Yaesu 6 pin Mini DIN. 

MFJ Computer Printer, Serial & USB Cables 

MFJ-5412 $11.95 Printer Cable, 36-Pin Centronics to DB-25 male, 6 feet 

MFJ-5414 $9.95 Serial Cable, DB-25 male to DB-9 female, 6 feet 

MFJ-5313 $9.95 Serial Cable, DB-25 male to DB-25 female, 6 feet 

MFJ-5409 $9.95 Serial Cable, DB-9 male to DB-9 female, 6 feet 

MFJ-5408 $9.95 Serial Cable, DB-9 female to DB-9 female, 6 feet 

MFJ-5419 $9.95 Serial Y-cable, (1) DB-9 female to (2) DB-9 male, 8 inches 

MFJ-5430 $2.95 USB A Male to USB B Male, 6 foot cable, beige. 

MFJ TNC2 and MFJ-1278 Series Accessories 

MFJ-44, $14.96. *Plug-in scope tuner for MFJ TNCs. 

MFJ-44X, $14.96. *Plug-in scope tuner for other TNCs. 

MFJ-2400, $19.95. * 2400 baud packet modem.Lessens 

congestion on crowded bands with faster communication. 

Still gets 300/1200 baud for other TNC compatibility. 


MFJ 24/12 Hour Clocks 

Dual Displays: 24 and 12 Hour Clock 

MFJ-108B dual clock has separate 

24 hour and 12 hour displays. 

Lets you read both UTC and local 

time simultaneously. Features huge 

high-contrast 5/8 inch LCD numerals that makes it 

easy to read across the room. Mounted in attractive 

solid brushed aluminum frame with sloped face for 

easy viewing. Synchronizable to WWV for splitsecond 

timing. Quartz controlled for excellent 

accuracy. Long life button battery included. 

41 / 2Wx1D x2H”. MFJ one year limited warranty. 

DXer’s 24Hr. Wall Clocks Hi-Contrast LCDs 14” Atomic Wall Clock 

MFJ-115, $24.95. Set 

this 24 hour Quartz 

clock to UTC/ GMT and 

you can determine the 

time in any time zone of 

the world at any time of 

the day. Premier world 

cities encircle its colorful 

world map face to 

indicate time zone. 12” 

face is easy to see across room. Seconds hand. 


This is the world’s most 

popular ham radio wall 

clock! True 24 hour 

Quartz movement. Huge 

12 inch black face with 

large white numerals 

give excellent visibility 

across room. Attractive 

gold colored hour, minute 

and seconds hands looks great on any hamshack 

or other wall! 


New! 12 hour Quartz 

movement gives 12 hour 

MFJ-107B, $12.95. 24 hour UTC 

Clock has large 5/8 inch LCD numerals. 

21 /4x1x2 inches. Synchronizable 

to WWV. Solid brushed aluminum 

frame lasts for years. Long life button 

battery included. 

MFJ-137RC, 

$29.95. 

This 

HUGE 14” 

twelve (12) 

hour clock 

is a monster! 

That’s 

why many 

are used in 

hospitals 

and schools 

across the 

United States! The MFJ-137RC automatically 

sets itself and is accurate to the second! 

DST mode can be disabled. Handsome 

black with white face looks great in your 

hamshack, office, hospital, etc. Uses AA battery, 

not included. Can also manually set. 


time on inner dial (for 

XYL) and 1200 to 2400 

hour time on its outer 

dial (for you). Attractive 

clean, white face is 

highly visible. Handsome 

black trim shows 

24 hour time format, looks great in any decor. 

MFJ-131RC, $39.95. 

Read 24/12 hour time at a 


Radio Controlled 

single glance on dual time 

displays! This 12-inch dia. 

atomic wall clock can be 

seen from across the 

room! Liven up any hamshack 

and automatically 

receive WWVB signal. 

Red second hand. Attrac- 

tive, clean, white, real glass face is highly visible 

and will improve the decor of any room. 

Wireless Forecast Station 

MFJ-195RC, $39.95. Weather 

forecast icons and weather tendency 

indicator, in/out temps and 

humidity. Atomic time, DST on/ 

off, wall/desk mount. Can receive 

up to 3 sensors. 3.5Wx 

5.5Hx1.25D in. Bright display is 

1.25Wx3.25H inches. Uses four 

AA batteries, not included. 

New! 


$ 21 95 

Ship code A 

MFJ-112B, $29.95. This DXers 

World Map Clock shows you the time 

at any QTH throughout the world on 

an attractive LCD world map. Also 

shows day of week, month, date and 

year. Time displays hour/minute/second. 

Choose 12/24 Hour. Easy pushbuttons 

move you east and west on the 

map to display a QTH in every time 

zone. Daylight saving time feature. 

Attractive grey. Cool blue backlight 

for night viewing. Great for gift or use 

as logging clock. 41 /2Wx33 /8Hx21 /4D 

inches. One year No Matter 

WhatTM limited warranty. 

Solar Power Temp/Hum Station 

MFJ-141, $29.95. 

In/Out temps and 

humidities, min/max 

temps, solar powered 

receiver and remote 

temps/humidity sensor 

include rechargeable 

batteries. Desktop, 

1 1 /4Wx6 1 /2x1 1 /4 inches. 


Huge 2.5” LED Clock 


$39.95. 

This 12/24 

hour clock 

has the 

biggest and 

brightest 

LEDs of 

any clock we have ever seen! Giant 2.5 inch 

super bright LEDs are nearly the width of a 

2-Meter HT -- you can see them from across 

the street, day/night! Perfect for decreasing 

eyesight. 12/24 hour switch. Wall/ desk 

mount. Black with bright red LEDs! 

12Wx7 1 /2H in. Use 9V battery for backup. 

Hour/minute set buttons. 110 VAC, 60 Hz. 


Switchable 12/24 

hour display with 

HUGE 1.8” red 

LEDs. Absolutely 

shines from across 

the room. Super compact 3 1 /2Hx 9Wx2 1 /2D 

in. 9 minute ID timer, alarm, 9V battery 

back-up. Use 110 VAC, 60 Hz. Great for 

the sight impaired! 

12 Vdc LED Mobile Clock 

MFJ-116DC, $19.95. 

12 VDC, plugs in cigarette 

lighter. Huge .562” 

green LCD digits! Great 

for motor-homes and truckers! 12 hour time 

only. Attractive black cabinet, long cord.

MFJ ATOMIC 24/12 HOUR CLOCKS 

• Automatically receive WWVB radio signal from National Institute of Standards and 

Technology in Ft. Collins, Colorado for millisecond accuracy • Choose 24/12 Hour time 

format or simultaneous dual times • Choose from huge selection of wall or desktop mounts 

MFJ Atomic Alarm 

Clock -- SUPER DEAL! 

MFJ-132RC has an unbelievable number 

of features for such a low price! You 

get HUGE 0.563-inch height LCD digits, 

atomic-controlled for absolute pin-point 

accuracy, 24/12 hour selectable, running 

seconds display, dual alarms, 5-minute ID 

(snooze), fabulous backlight, month and 

date display, an indoor thermometer (range 

32 to 122 degrees Fahrenheit), uses just 

two AA 1.5V batteries (not included) and 

has MFJ’s famous one year limited warranty. 

MFJ will repair/replace (at their option) 

your clock for one complete year. 

New! 

MFJ Dual Time Display 

Atomic Clock 

MFJ-133RC dual time zone 

LCD clock can display two 

time zones at once. Choose to 

show UTC and local time or 

other dual time format! Lets you read any 

two time zones in 24 or 12 hour format. 

Atomic-controlled for absolute pin-point 

accuracy! Features HUGE 1 1 /8 inch highcontrast 

LCD numerals easily read from 6 

feet away . . . but is a super compact 

4Wx3Hx 3 /4D inches. Super attractive silver 

clock folds up and slides in your shirt 

pocket for great travelability -- hamfest 

proven to wake you up on time. 

Large Display Wall Mount Atomic 24/12 Hour Clocks 

24/12 Time/Calendar 

Temp Atomic Clock 

Dual Time Atomic Clock 

with UTC Zone 

Solar Powered Eternity 

Atomic Clock 

MFJ-130BRC 

$ 24 95 

Ship Code B 

MFJ-132RC 

$ 95 15 

Ship Code A 

MFJ-130BRC is 

a 24/12 hour 

wall/desk mount 

atomic clock. It has 

HUGE 1 7 /8” digits 

that can be seen 

from across your 

room. This handsome 

silver and black base with a 

bright green LCD display 

looks great in any shack or any 

other part of the house for that 

matter. MFJ-130BRC has a running seconds 

display and also displays the month, 

date, and day. Indoor temperatures are also 

displayed and all is simultaneous. Daylight 

savings time can be disabled. You get all 

info you need to carry on a ragchew QSO. 

New high-tech 24/12 hour 

clocks feature indoor and 

wireless outdoor temperature 

sensors, calendar and monster 

size 2 1 /4” time digits -easily 

seen across the room! 

Select from moonphase or 

weather forecast icons. 

MFJ-134RC and MFJ- 

144RC automatically set 

themseselves via WWVB from Fort 

Collins, Colorado. Daylight savings time 

can be disabled so they can be set to UTC. 


$ 34 95 

Ship Code A 


$ 95 79 

Ship Code B 

Read both 

UTC and local 

time at-a-single-glance 

with 

this dual atomic 

clock. Displays 24/12 hour time simultaneously 

-- each can be independently set. Automatic 

backlight lights up every day at your 

preset time for 8 hours. Mounted in a handsome 

silver-metallic, hard-plastic frame, it 

features HUGE, easy-to-see 1W by 2H inch 

LCD numerals, an exclusive UTC zone and 

running seconds display. 11 3 /8Wx7 1 /4Hx1D” 

mounts on wall or desk mount. Daylight savings 

time can be disabled independently in 

each clock display. Uses four AA batteries. 

Solar Atomic Clock 

never needs batteries 


$ 95 29 

Ship Code A 

This fabulous solar-powered 

24/12 Hour atomic 

clock never needs batteries, 

has a large LCD display 

(time digits 1 5 /8x2 1 /4”) and gives precision 

accurate time from WWVB. Handsome 

desktop. Alarm. 3Wx4 1 /4Hx1 1 /2D inches. 


$ 59 95 


exclusive 

solar poweredEternity 

Atomic 

ClockTM works for an “eternity”! No need for batteries 

or to set time! Receives WWVB signal. Display 

is a whopping 31 /2Hx61 /4W inches with 

huge 2” time digits. Choose 24 or 12 hour 

time. Has indoor temperature, running seconds, 

month/date and day-of-week displays. 

91 /2Wx61 Ship Code B 

/4Hx1D in. Attractive silver metallic 

looks fantastic on the wall or desk mounted in 

the shack or office! Has power on/off switch 

for when clock is in storage or not in use. 

In/Out Temp/Calendar/Weather Forecast Atomic Clocks 


$ 39 95 

Moonphase 

Ship Code B 

See in 

the 

Dark! 


$ 39 95 

Forecast Icons 

Ship Code B 

They also have various alarm 

settings, calendar display, dayof-week 

and choice of English, 

French, or Spanish languages. 

Mount on the wall or set on 

your desk. Wireless outdoor 

sensor is housed in a compact 

11 /2Wx51 /4Hx1D” durable plastic. 

Hardware included for 

easy mounting anywhere. 

Indoor clocks are 12Wx73 /4H inches in 

a handsome dark wood frame with black 

display and green illuminated backgrounds. 


New!

MFJ Radio-Contro led (Atomic) WristWatches 

For an unbelievable 

$19.95, you get a beautiful 

full-featured 

atomic watch -- rivals 

the one your buddies 

paid $99.95 for! 

MFJ’s Radio Controlled 

Wrist Watch 

automatically receives 

WWVB signal from 

MFJ-186RC the US Atomic Clock 

$ 95 located in Fort Collins, CO. 

19 MFJ-186RC lets you 

Ship Code A switch from 24 hour format or 

Professional Color Weather Station 


$ 149 95 

This brilliant, wideangle, 

large color LCD 

display will look very 

Ship Code C 

impressive in the office or in the shack. 

MFJ-199 has a wireless sensor for displaying 

IN/OUT temps (F/C), wind di-rection, 

speed, gust, and forecast/tendency. 

You get a large color 7” LCD display and 

remote control. Wireless sensors include 

wind/temp/humidity and rain for outside 

mounting. Attractive wall or desk mounting. 

It doubles as a photo viewer, input photos 

of your loved ones or your favorite rig. 

Supports USB flash drive (up to 32GB) or 

SD and MMC cards (up to 32 GB). 

Displays time 12/24 hours with manual 

set time, date and alarm. Calendar display 

has date/month/year. Displays moon phase 

in eight different patterns -- get your howl 

on at the right time! 

MFJ-198RC receives complete weather 

data information from three outdoor sensors. 

Thermo-Hygro sensor transmits a wireless 

433 MHz frequency signal, or can be set up 

using a wired connection to base. 

Included PC Interface; Wind Chill: 

Morse Code Forgotten? No way! MFJ-MC10 

Carry it with you on this beautifully dis- 1” Diameter 

played 18K gold-plated Morse Code $ 95 

Pendant. These coins are made from the 12 Ship Code A 

same gold factory that made the Beijing 

Olympic gold medals! 

The "send" side gives you International Morse characters 

displayed in alphabetical order. 

The "receive" side has characters grouped by their 

dot and dash sounds for rapid decoding. For example, H, S, I, and E 

are all composed of dots arranged in descending order. Add a Dash 

to the end, and you have V, U, and A. 

12 hour format and to different time zones 

(Pacific, Mountain, Central, and Eastern). 

Also has running seconds display and dayof-week 

and date display. 

This MFJ radio-controlled wrist watch 

has an alarm function and also can be used 

as a stopwatch for standard, accumulated, 

split-time, or competitor measurements. A 

backlight will illuminate the LCD display 

for about three seconds in a brilliant blue. 

Year, Month, and Day can be displayed 

in calendar mode. MFJ-186RC is waterresistant 

up to 3 ATM - no more fear of the 

rain as you work hamfest security. 

• 7” Color LCD Display 

• Wireless Outdoor Sensors 

• Remote Controller 

• Rain/Wind/In-Out Temps 

• Calendar/Photo Viewer 

• Forecast Icons, More! 

You get five full-color weather 

icons (sunny, partly cloudy, cloudy, 

rainy and stormy). Temperatures are displayed 

from -4 F to +140 F, and humidity is 

Now with 100% Solar-Powered Wireless Wind Sensor! 

Direction and Speed; Rain Data; Forecast 

w/Tendency; IN/OUT Temp; IN/OUT Humidity; 

Weather Alarms w/Storm Warning. 

Records 175 sets of weather data history 

with "Heavy Weather" PC software. Upload 

weather data to your PC with easy COM port 

connection. Weather forecasting function with 

3 weather icons, weather tendency indicator. 

Wireless outdoor temps (°F or °C), outdoor 

humidity (%RH), Monitors indoor 

temps (°F or °C), Monitors indoor humidity 

(%RH), Records MIN/MAX temps and 

MIN/MAX humidity with time and date of 

recording, Barometric air pressure (inHg or 

hPa), Records MIN/MAX barometric pressure 

with time and date or recording, 

Barometric pressure tendency arrow, Dew 

point (°F or °C), Records MIN/MAX dew 

point with time and date or recording. 

Wind Direction with LCD Compass 

(numerical (e.g. 225°) or abbreviated char- 

54 MFJ...The World Leader in Ham Radio Accessories 

MFJ-189RC has a genuine 

black, leather band 

that is rich looking and 

perfect for office style 

and at the hamfest. It also 

features stylish nonnumerical 

12-hour and 

second notches on the silver-metallic 

face. The 

analog watch face looks 

like a work of modern 

art! Receives the WWVB atomic 

signal so it always stays accurate. 

Super easy to set and read. 

acters (e.g. SW), Wind speed (mph, km/h, 

or m/s, and Beaufort Scale), Records 

MIN/MAX wind speed with time and date 

of recording, Rainfall data (inches or millimeters): 

1 hour, 24 hour, and total, Selfemptying 

Rain Bucket, Weather alarm 

modes for: temperature, humidity, wind 

chill, dew point, rainfall, wind speed & 

direction, air pressure, storm warning. 

Atomic time/date with manual setting, 

Auto updates for Daylight Saving Time 

(on/off option), Perpetual calendar, Time 

zone setting, Alarm, EL backlight. Wall 

hang or free stand, AC adapter included, 

12/24 hour time display, Calendar display 

(weekday, date, month, year), Transmission 

range up to 330 feet (100 meters). 

Dimensions: Receiver: 7 1 /4Wx7 1 /4H 

x 1 /2D inches; Thermo: 3Wx5 1 /4Hx2.5D inches; 

Rain: 5 1 /2Wx7Hx2 3 /4D inches; Wind: 


MFJ Collectible 18K Gold-plated Morse Code Coins 

MFJ-MC15 

1.5” Diameter 

$ 19 95 

Ship Code A 

New! 


$ 19 95 

Ship Code A 

Personalize your Display! 

Weather Only Weather/Photo 

displayed in RH% from 20-99. 

Read relative air pressure, 6-hour pressure 

history graph, wind speed, gust 0-67 mph, 

wind chill, wind speed and direction with 

LCD compass display. Rainfall 0-393.6”, 

total, last 24H, last week, last month. 

Overall size: 91 /4Wx61 /4Hx11 Calendar/Photo Photo Only 

/2D”. More! 

MFJ Atomic Wireless Weather Station 


$ 95 179 

Ship Code D 

Even if you don't know the code, this handy 

pendant gives you an easy way to decode 

repeater call signs and station IDs. It's the perfect 

guide for learning code any time! 

The FCC code "requirement" may be gone, 

but a recent survey shows CW operation is 

increasing. 

MFJ-MC10, $12.95, is 1 inch in diameter. 

MFJ-MC15, $19.95, is 1 1 /2 inches in diameter. 

Each one has the solid heft of precious metal and comes with a 

hole for attaching to a chain or key ring.

MFJ Speaker Mics for Yaesu, Icom, Kenwood and Wouxun HTs! 


(Y, I, K,) 

Fits Yaesu, Icom, Kenwood 

Wouxun and compatibles. 

$ 16 95 

Ship Code A 

Here’s a top quality 

handheld speaker mic 

that fits snugly in your 

hand! It’s perfect for 

new Yaesu, Icom, Radio 

Shack, Kenwood, Alinco, 

ADI and compatible 

handheld transceivers. 

Fits perfectly in your 

hand and gives booming 

receive audio so you can monitor stations 



MFJ Mini HT Speaker/Mic 


(I, K, Y) 

$ 15 95 

This is the “Perfect-size” 

speaker mic for tiny new HT 

radios on the market -- Super 

compact 1 

Identify your speaker/mic model 

MFJ uses the letters I, K, Y and R to 

denote what connector is on the speaker mic. 

I is for Icom, some Yaesu, Radio Shack and 

most Alinco. K is for most Kenwood and Wouxun. 

Y is for Yaesu VX5R series and Icom Q7A. R 

is for the new Yaesu VX7R series. 

3 /8Wx21 /2Hx1 Ship Code A Ship Code A 

/2D”. 

It matches new tiny handheld 

radios and fits perfectly in 

the palm of your hand. Sturdy PTT 

switch, 3.5 mm earphone jack to 

monitor receive audio long, curly cord. 

MFJ- 285I, $15.95, fits Icom, Alinco, 

Radio Shack, older Yaesus and compatibles. MFJ- 

285K, $15.95 fits Kenwood, Wouxun, Alinco and 

other compatibles. MFJ-285Y, $15.95, fits Yaesu 

R-series, Icom Q7A and other compatibles. MFJ- 

285R, $19.95, fits VX7R series handheld radios. 

while the microphone is 

attached to your lapel -no 

more holding the 

speaker up to your ear! 

Compact 2Wx3Hx11 MFJ-295R 

Fits Yaesu VX-7R 

series only 

$ 95 19 /4D 

Ship Code A 


MFJ’s high-quality non-directional 

electret condenser microphone gives your 

handheld crystal clear transmit audio. 

The MFJ-295 Microphone has -53 dB 

sensitivity and 1K Ohm impedance. 

Excellent top quality speaker produces 

83 dB of crystal clear and loud, booming 

receive audio. 8 Ohm impedance. 

Includes a built-in 3.5 mm earphone 

jack lets you continuously monitor receive 

audio and it lets you hear your radio in a 

loud, noisy environment (see MFJ-301, 

New Compact heavy duty MightyMic TM 

MFJ-287 (Y,I,K) 

Fits Yaesu, Icom, 

Kenwood, Wouxun 

and compatibles 

$ 16 95 

Ship Code A 


(I, K, Y) 

$ 21 95 

Ship Code A Ship Code A 

This new, deluxe speaker 

microphone has a volume 

control knob that allows you 

to set it for a super quiet 

room or noisy environment 

like a hamfest or banquet. 

MFJ-296 has a 360 

degree rotating lapel clip, a 

first-rate electret mic element and a fullsize 

speaker that gives you superb receive 

MFJ-285R 

for VX7R 

$ 19 95 

Compact 

MightyMite TM 

heavy duty HT 

speaker mic has 

a 0.9” speaker 

to produce 

crystal clear 

frequency response of 50-18,000 Hz. 

Non-directional electret condenser mic 


for VX7R 

$ 24 95 

has -56 dB sensitivity and 20-20,000 Hz 

frequency response. 

It fits snugly in your hand! Perfect for 

your new Wouxun, Kenwood or Alinco 

handheld radio. 1 3 /4Wx2 1 /2Hx1D inches. 

Built-in 3.5 mm earphone jack, top 

quality PTT thumb switch, 8-position swivel 

lapel clip and 3 1 /2 feet cord. 

MFJ-287R, $18.95. For Yaesu VX7R. 

New deluxe Speaker/Mic has Volume control 

audio. 

It also gives you excellent transmitting 

audio -- no more muffled sounding audio or 

scratchy voice transmissions! 

Also has 3.5 mm earphone jack (see 

MFJ-301/MFJ-302 right), momentary PTT 

switch, and retractable cord. 

MFJ-296I, $21.95, fits Icom, Radio 

Shack, older Yaesus and other compatibles. 

MFJ-296Y, $21.95, for Yaesu FT50R, 

VX5R series rigs. 

MFJ-296K, $21.95, for Kenwood, 

Wouxun, Alinco and other compatibles. 

MFJ-296R, $24.95, fits Yaesu VX7R 

handheld series only. 

MFJ HandyPal TM 

HT Mic Earphone 

This MFJ earpiece is the 

perfect companion for your 

MFJ or other speaker-mic. 

Continuously monitor receive 

MFJ-301 audio, hear your HT in a noisy 

$ 95 environment. Comfortable 

6 

Ship Code foam fits securely in your ear 

and doesn’t hurt. Super lightweight. 

Fits 3.5 mm jack. 

MFJ-302 is similar 

but has a soft earloop 

speaker that wraps 

around your entire ear - 

- gives a more naturalsounding 

audio and cuts 


$ 9 95 

Ship Code A 

out background noise -also 

has more comfort 

and security. 3.5 mm 

jack and cord. 

I K Y R 

$6.95 or MFJ-302, $9.95, below right). 

A top quality PTT thumb switch with 

an eight-position swivel lapel clip rotates 

360 degrees. 3 1 /2 feet of durable, stretchable 

cord. Made of high-impact plastic. 

Water resistant with protective rubber at all 

of the bending points, it won’t break easily. 

Choose your model . . . 

MFJ-295Y, $16.95 is for newer Yaesu 

single prong plugs like Yaesu VX5R and 

Icom single pin plugs like Q7A. 

MFJ-295I, $16.95 is for Icom, Radio 

Shack, Alinco, ADI and compatibles. 

MFJ-295K, $16.95 is for Kenwood, 

Wouxun, Alinco and other compatibles. 

MFJ-295R, $19.95 fits new Yaesu VX- 

7R handheld radios. 

Replacement HF Radio 

Handheld Microphones 

MFJ now offers dynamic 

HF Radio replacement handheld 

microphones! 

Replace your old, beat-up 

Icom, Kenwood, Yaesu, 

Alinco, or TenTec microphones. 

Gives PTT and quality 

mic audio. Heavy-duty construction, 

extra long cord. 

Specify MFJ-290K/Y/I/T for 8-pin 

round mic connector. 

Select MFJ-290MI for 

Icom modular, MFJ- 

290MK for Kenwood 

modular and MFJ- 

290MY for Yaesu 

MFJ-290K/Y/I/T 

MFJ-290MK/MI/MY 

MFJ-290K4/Y4/I4/T4 

$ 19 95 

Ship Code A 

modular. Choose MFJ-290K4/Y4/I4/T4 for 

4-pin round mic connector. 

Wouxun Handheld 

Accessories from MFJ 

MFJ-1717SF, $18.95. 

15 3 /4” in length, 1/2 Wave on 440 MHz, 

2.15 dBi gain. An efficient full-size 1/4 

wave ant. on 2 M. Factory tuned for low 

SWR. High-Q, It’s rugged! Bend, twist, 

flex and tug it, it pops right back up. 

SMA female connector screws into HT. 

MFJ-293K, $24.95. Secure and 

comfortable earbud and boom mic 

is as small and inconspicuous as 

your radio! Rubber flex earloop 

and 5” flexible boom mic adjusts 

perfectly to your mouth. Tiny thumbsized 

PTT switch is built in the 6’ cord. 

MFJ-295K, $16.95. 

Top quality HT mic fits snugly in 

your hand! Booming transmit/ 

receive audio. Built-in 3.5 mm 

earphone jack. PTT thumb switch, 

lapel clip, 3 1 /2 foot cord. 

2Wx3Hx1 1 /4D inches. 

New! MFJ-287K, $15.95. Compact 

MightyMic TM heavy duty HT speaker 

mic has a 0.9” speaker to produce 

crystal clear frequency response of 

50-18,000 Hz. Fits snugly in your 

hand! Perfect for your new Wouxun 

handheld radio. See more information 

above left. 

MFJ-1719SF, $14.95. 

SmallWonder TM Wouxun HT antenna is 

about an inch tall. 144/440 MHz, 

receives on 1200 MHz as well. Great 

for receive/monitoring 2 Meters. 


MFJ Deluxe Headset MicrophoneTM adds professionalism 

MFJ-288 (K, I, Y, R) 

$ 95 24 

This deluxe headset microphone gives hams the 

Ship Code A professional look they deserve -- great for public service 

This 

MFJ Deluxe Headset 

Microphone TM lets you carry 

on a private QSO while in a 

noisy environment. The 

microphone can pick 

up your voice, 

whether booming or 

at a quiet whisper 

Finally 

. . . a 

secure 

and comfortable 

earbud and boom 

microphone that’s as 

small and inconspicuous 

as your radio! 

No more gaudy, oversized 

headsets or 

massive handheld 

speaker microphones! 

when placed appropriately near your 

mouth. 

The earphone gives superb tonal quality 

so even distant stations will come in loud 

and clear. Made of sturdy black plastic and 

strong metal sliders, one size fits all! 

Superb speaker and mic foaming make 

it super comfortable for long ragchews. 

Small PTT switch attaches to your shirt 

This tiny earbud features a secure and 

comfortable rubber flex earloop design and 

5 inch flexible boom microphone that 

adjusts perfectly to your mouth. The earloop 

secures your earbud for a comfortable 

fit so there’s no more worrying about it 

falling out of your ear. 

It’s perfect for monitoring your receive 

audio when you are in a loud environment. 

MFJ-293’s special rubber flex earloop 

design adjusts to fit the right or left ear (big 

or small) very securely and comfortably. 

Made of a sturdy black polyurethane and 


or pants pocket. Six foot cord. 

MFJ-288I fits Icom, Radio Shack, older 

Yaesus, ADI, Alinco, other compatible HTs. 

MFJ-288K fits Kenwood, Wouxun and 

compatible handheld radios. 

MFJ-288Y fits VX-5R series, IC-Q7A 

& compatibles. 

MFJ-288R fits new Yaesu VX-7R 

series handheld transceivers. 

MFJ Featherweight earbud Boom MicrophoneTM Features rubber flex earloop design for security and comfort and 5-inch boom mic 


(K/Y/I/R) 

$ 24 95 

Ship Code A 

comfortable rubber earloop, it’ll give years 

of dependable use. Tiny thumb-sized PTT 

switch is built right into the 6 feet of cord. 

MFJ-293I fits Icom, older Yaesu, Radio 

Shack, ADI, Alinco and compatible HTs. 

MFJ-293K fits Kenwood, Wouxun and 

other compatibles. 

MFJ-293Y fits Yaesu FT10R/40R/ 

50R/VX-1R, Icom IC-Q7A, and other 

radios using single plug-ins. 

MFJ-293R fits Yaesu VX7R series. 

All MFJ speaker microphones have 

MFJ’s one year no matter what warranty. 

MFJ Featherweight Vibration earbud Microphone TM 

Picks up the vibration of your earbone and translates it into a signal through your HT 

Background Noise FREE! 

The speaker and microphone are both 

integrated into the earpiece -- it picks up 

the vibration of your earbone and then 

translates the vibration into a signal 

through your handheld transceiver! 

Super Audio Quality! It only transmits 

the vibrations from your ear -- no background 

noise! 

It’s perfect for high-ambient environments 

like hamfests, traveling through airports, 

on the bus, riding motorcycles, 

ATVs, etc. It truly is amazing! 

Older competitive versions of earbud 

vibration mics sounded terrible -- there was 


(I,K,Y) 

$ 95 17 

Ship Code A 

Be Cool! 


Featherweight 

Earbud/Mic has a tiny 

earphone and thumbsize 

microphone/PTT 

switch built right into 

the cord. 

It’s barely noticeable and so lightweight 

you won’t know it’s there -- people will 

think you are a detective or airport security 

or even a government spy! 

Get crystal clear receive/transmit audio 

out of an ultra-light (30 grams) speaker. 

Non-directional electret condenser mic has 

-64 dB sensitivity, 1.1K Ohm impedance. 

background 

noise 

and 

transmissions 

sounded 

like a robot was on 

the other end. With 

the new MFJ-283 

technology only your 

natural-sounding voice 

is transmitted. 

The PTT switch has 

velcro for attaching to wool 

clothes or your belt. 

MFJ Featherweight Earbud Speaker Microphone 

Tiny earphone and thumbsize microphone/PTT switch is built right into the 

cord! It’s barely noticeable and so lightweight, you won’t know it’s there! 


VX7R series 

$ 95 19 

Ship Code A 


(I,K,Y, R) 

$ 29 95 

Ship Code A 

Has 4 foot cord. 

MFJ-292I fits ICOM, 

older Yaesu, Radio Shack, 

Alinco, other compatibles. 

MFJ-292K for 

Kenwood, Wouxun and compatibles. 

MFJ-292Y for Yaesu FT-10R/40R/50R, 

and VX-1R/VX5R series. 

MFJ-292R, $19.95, fits new Yaesu VX- 

7R series handhelds. 

MFJ Neckset Microphone 

doesn’t mess up your hair! 


Don’t mess up your hair and you can still wear your cap! 

MFJ-282 stays naturally hidden behind your neck. 

Super audio, lightweight and comfortable! 

MFJ-282I fits Icom and older Yaesu; MFJ-282K fits 

Kenwood, Wouxun and compatibles; MFJ-282Y fits Yaesu FT- 

50R, VX5R-series, Icom Q7A; MFJ-282R fits VX7R series. 

Two clips on the cord let you position 

and secure the earpiece/PTT to your body 

comfortably and a 42-inch durable cord lets 

you snake it around your body how you want. 

You can also almost totally conceal your 

cord, PTT and earpiece. You’ll look like a 

detective, airport security or even a government 

spy -- nobody will even realize you 

are on your handheld radio talking. 

MFJ-283I for Icom, Shack, Alinco, ADI 

and older Yaesu transceivers. MFJ-283K 

for Kenwood, Wouxun and compatibles. 

MFJ-283Y for Yaesu VX5R series, Icom 

Q7A, and other single plugs. New! MFJ- 

283R for Yaesu VX-7R and compatibles. 

MFJ BoomMic/FM Scan 

MFJ-284, $29.95, same as MFJ- 

293, but adds an FM broadcast 

scan radio inside the tiny PTT 

switch. Lets you catch up on the 

news or listen to music or sports 

while monitoring a 2-Meter 

operating frequency! Auto 

switches from FM to HT audio when monitoring 

frequency is detected. Batteries included. 

Order MFJ-284I (Icom) and MFJ- 

284Y for Yaesu VX5R series and the Icom 

Q7A handhelds.

A 

B 

MFJ’s handheld “Rubber Duck” antennas 

High Gain Dual Band HT Flexible Duck Antennas 


The World’s best selling HT antenna! When other rubber ducks just give 

you noise, you’ll enjoy dependable QSOs with the MFJ-1717. Only 15 3 /4 

inches in length, it’s a halfwave on 440 MHz that gives you a hearty 2.15 

dBi gain. On 2 Meters, you get an efficient full-size 1/4 wave antenna for 

full size performance. MFJ-1717 is precisely tuned at the factory for low 

SWR. High-Q, low loss construction gives you maximum radiated power! 

BNC connector. It’s rugged! It’ll take all the bending, twisting, flexing and 

tugging you can dish out, and just pop right back up. Radiator is protected 

by a durable synthetic rubber compound and has a hard protective safety 

tip. Strong rigid base protects the matching network from flexing and 

changing frequency. Durable construction. MFJ-1717 has BNC connector. 

MFJ-1717S, $18.95. Similar to MFJ-1717, but has male SMA connector. 

MFJ-1717SF, $18.95. New! Similar to MFJ-1717S, but has female SMA 

connector. Fits the new, popular Wouxun brand of handheld radios. 

B. MFJ-1716, $14.95. Dual band 144/440 MHz Flexible rubber duck 

antenna is similar to MFJ-1717. 7 1 /2 inches length, 1/4 wave on 440 MHz 

and loaded 1/4 wave on 2 Mtrs. Tough, durable construction. MFJ-1716 

has BNC connector. Order MFJ-1716S for SMA connector. 

MFJ Telescopic Handheld Antenna Range Extenders 

A 

B 

C 


For really long range 

this endfed halfwave 2- 

Meter is hard to beat! 

Outperforms a 5/8 wave 

on an HT because the 

5/8 wave needs a ground 

plane. Collapsed (10.5 

inches) it performs like 

a rubber duck. 40 inches 

extended gives you 

LongRanger TM performance! 

MFJ-1714S, 

$16.95. Like MFJ-1714, 

but has SMA connector. 

SmallWonder TM HT Antenna 

MFJ-1719/MFJ-1719S/SF, $14.95. 

This HT Antenna is truly amazing 

for its size! Less than 1” tall, it’s 

greatt for traveling and monitoring 

calls. It doesn’t get in your way! 

Receives and transmits on 2 

Meter/440 MHz. Also re-ceives 

great signals at 1200 MHz. MFJ- 

1719 has BNC, MFJ-1719S has 

SMA male. New! MFJ-1719SF has SMA 

female connector, fits Wouxun Handhelds. 

MFJ 2-Meter Pocket Roll-up 


Roll up this 1/2 wave 

2-Meter antenna and 

stick it in your pocket. 

Vacations, camping, 

etc. Get home 

station performance 

on-the-go! Just 75” 

long. Hang in a tree, plug the BNC into your 

HT and enjoy some great QSOs. Omnidirectional, 

has significant gain over a 1 /4 

wave. Doesn’t need a ground plane so it’s 

convenient for indoors. Handles 200 Watts. 

MFJ 440 MHz Pocket Roll-up 

MFJ-1731, $29.95. 440 

MHz pocket roll-up antenna, 

1/2 wave. 51” roll-up J-pole 

for 440 MHz is like MFJ- 

1730, but shorter. Hang it 

and operate with MFJ roll-up J-pole antennas 

anywhere and everywhere! 200 Watts. 

B. 

MFJ-1712, $14.95. This 

telescopic Dual Band 

(144/440 MHz) is a 1 /4 

wave on 2 Meters, 5/8 

wave with gain on 440 

MHz. Just 7 1 /4 inches 

collapsed. Acts like a 

rubber duck. 19 inches 

extended gives superior 

performance. 

MFJ-1712S, $14.95. 

Like MFJ-1712, but has 

SMA connector. 

C. 


The PocketLinear TM is a 

pen-sized 3/8 wave for 2 

Meters! Carry this 

antenna in your shirt 

pocket like a ball point 

pen with pocket clip. 

When your rubber 

ducky on your HT just 

won’t receive well, pull 

it out, extend it to 24 

inches and carry on your 

QSO. Tiny 5 1 /4 inches 

collapsed. 

MFJ SuperFlex ThinDucks TM 

A. MFJ-1715, $19.95. Tie it in a 

knot . . . when you use it, it’ll bounce 

back in shape -- you can’t break it! 

It’ll take all the bending, twisting, 

flexing and tugging you can dish 

out, and just pop right back up. 

This MFJ-1715 12 1 /2” SuperFLEX TM 

radiator is a 1 /2 wave on 440 MHz -gives 

a hearty 2.15 dBi gain. On 2 

Meters, you get an efficient full size 

1 /4 wave antenna. Safety tip, durable 

synthetic rubber compound. Add 

“S” for SMA connector. 

B. MFJ-1713, $16.95. 5 1 /2” radiator 

is similar to MFJ-1715 except 

for gain on 440 MHz. Quarter wave 

on 440 MHz and an efficient loaded 

Quarter wave on 2 Meters. Add 

“S” for SMA connector. 

MFJ Triple Band FlexiDucks TM 

A. MFJ-1720S, $29.95. MFJ’s Triple 

Band 2M/6M/440 HT FlexiDuck TM 

antenna is 19 inches tall -- It’s a 5/8 

Wave on 440 MHz to give you a hearty 

3.2 dBi gain. On 2 Meters you get a 

1/4 Wave antenna with 2.15 dBi gain. 

On 6 Meters you get an efficient full 

size 1/4 Wave antenna for full-size performance. 

Precision-tuned at the factory 

for low SWR. High-Q, low loss 

construction gives you maximum radiated 

power. 10 Watts. SMA Connector. 

B. MFJ-1718S, $24.95. MFJ Triple 

Band 2M/220/440 MHz HT FlexiDuck TM . 

17 inches tall. SMA connector. 

Foldover Telescopic HT antenna 

MFJ-1812, $19.95. Dual 

band 144/440 MHz HT antenna 

combines telescopic and foldover 

features in a single antenna. 

Extends to improve range plus it 

folds over to get out of the way of 

your gut. MFJ-1812 is just 6” 

retracted and 16” extended. High 

Q low loss construction, super 

durability for years of use. 

MFJ Scanner/Receiver Antenna 

MFJ Compact Magnet Mounts for Handheld Antennas 

Put your flexible HT rubber 

duck on the roof of your 

car! 

Compact but powerful 

magnet is 2 3 /4 inches in diameter 

-- super strong! 

MFJ-332S, $14.95. HT 

Antenna Magnet Mount with 

SMA female connector. 12 


A 

MFJ-1717PL, $24.95. Plug into a 

2 Meter/440 MHz mobile/base rig - 

- not a 10-element yagi but it’ll get 

you out in a hurry! Fold-over, flexiduck, 

PL-259. 2 dBi gain on 440 

MHz, full-size 1/4 wave 2 Meter. 

Hi-Q, low loss construction. 161 Back-of-Radio 144/440 Base 

/2”, 

hard safety tip. Watts PEP. 

MFJ-1717P, $24.95. Like MFJ- 

1717PL, but no fold-over. Has 

straight PL-259. 

MFJ “Long-John” HT Antenna 

MFJ-1818, $24.95. This “Long-John” 

HT antenna gives you a whopping gain on 

2-Meters! You get 2.15 dBi gain in a 1/2 

Wave, super efficient antenna. 9 inches 

collapsed and 38 1 /2 inches fully extended. 

Has a FlexSpring TM base that prevents your 

connector from breaking. It’s tough, 

durable and well-protected for years of 

dependable service. 50 Ohms, BNC connector. 

Handles maximum 10 Watts. 

A. 

SMA 

or 

BNC 

B 

B. 

MFJ-1811, $14.95. This antenna can 

be dedicated to your Scanner or Receiver 

operations. It features both telescopic 

and foldover attributes. It folds-over to 

create a right angle connection to the 

back of a base or mobile, and it telescopes/collapses 

for your handheld. It’s 

24-inches extended and 7-inches collapsed. 

Covers 1.8 to 1800 MHz and 

has 2.15 dB gain. Handles 10 Watts. 50 

Ohms. BNC connector. VSWR is 1.5:1. 

feet of tough, flexible RG- 

58AU coax with SMA male 

end. 

MFJ-332B, $14.95. HT 

Antenna Magnet Mount 

with BNC female. 12 feet 

of tough, flexible RG- 

58AU coaxial line with 

BNC male connector.

MFJ Accessories for FT-817 and Other QRP rigs 

MFJ Walkabout Antenna 

80 through 6 Meters 

MFJ-1899T 

$ 79 95 

Ship Code A 

Work DX 

walking 

about! 


Walkabout 

antenna is designed for the FT- 

817 and other QRP rigs. 

Covers all bands 80 Meters 

through 6 Meters including 

WARC Bands. 

Its ten section telescoping 

whip is 52 inches fully extended 

and is 7 inches when collapsed. 

The whip unscrews from the 

12 inch base loading coil. It is 

ultra-compact for easy traveling. 

Handles 25 Watts. 

You change bands by plugging 

the “wander lead” into the 

appropriate socket on the base 

coil. Fine tuning is done by 

adjusting the telescopic whip. 

Has BNC connector. Use 

adapter for SO-239. 

2-Meter / 440 MHz “Backof-Radio” 

Antenna 

MFJ-1717PL, $24.95. 

Foldover dual band flexduck 

161/2 inch antenna 

with quality PL-259 connector. 

Hearty 2.15 dBi 

gain on 440 MHz and full 

size 1/4 Wave on 2 Meters. 

Single Band Walkabouts 

6/10/12/15/17/20/30/40/80 

Highly efficient single band 

Walkabout antennas for the FT-817 

and other QRP rigs let you work 

exciting DX no matter where you 

are -- hotel, mountain top, etc.! 

Each 10 section telescoping 

whip is 51 inches fully extended 

and collapses to 51 Ship Code A Ship Code A Ship Code A 

/2 inches and 

screws into a base loading coil. 

Handles 25 Watts. Has BNC 

connector. Use adapter for SO- 

239. MFJ-7703, $6.95, below. 

MFJ-1806T (6M) $34.95 









PL-259-to-BNC right angle 

MFJ-7703, $7.95. Sturdy, adapter 

for your FT-817 

and multimode 

HF antennas like 

MFJ-1899T. Reinforced 

elbow 

for less stress on 

radio connector. 

MFJ Pocket Repeater 

Extend range of any radio 2 Meter, 440 MHz, Handhelds, Mobile, Base!! 

When you and 

your buddy are out 

of radio range, the 

MFJ Simplex 

Pocket Repeater TM greatly 

extends your range. You can have 

your own private, portable 

repeater within your neighborhood 

or when hunting, fishing, camping, 

hiking, caravaning on-the-roadside. 

During a disaster, your MFJ-662 can provide emergency communications 

when repeaters are down. You can communicate way beyond the normal 

range of your handheld or mobile. 

Works with virtually any radios in any mode or frequency in any ham 

band or business band. It’s Legal! As a simplex repeater, MFJ-662 with 

another radio digitally records audio from an out-of-range HT/Mobile, then 

retransmits to other HT/Mobiles.Tiny, pocket -size 2 1 /4Wx3 3 /4Hx1D”. 

Repeats up to 32 second messages. LED lights when recording. On/Off 

switch. 5 pin header for radio cable (connector included). Use 9 volt battery, 

9-15 VDC or 110 VAC with optional MFJ-1312D, $15.95. Pre-wired 

cables for most radios, $17.95. See cable column on page 38. 

MFJ’s JimHandy TM CW interface plugs 

into your 144/440 MHz handheld and converts 

it into a modulated CW transceiver -just 

plug in your key. 

Get your ham buddies together on-theair 

and enjoy some fantastic CW fun. Run 

a little code practice on your repeater. Start 

your own FM CW Net. Have fun and 

10,12,15,17,20M 

$ 24 95 


$ 89 95 

Ship Code A 

upgrade! 

A 

transmit/ 

receive 

30/40/80 M 

$ 29 95 

6 Meters 

$ 34 95 

MFJ-4103 Miniature Switching Power 

Supply can deliver up to 40 Watts (13.8 

VDC at 2.89 Amps) of reliable power 

anywhere in the world. 

Incredibly tiny -- 4 1 /8X 2 5 /8X1 3 /8” 

and weighs just 10oz., including 

power cord, connector. Output DC 

cable with a standard coaxial DC power 

connector (2.1mm ID, 5.5mm OD). 

Sturdy adapter cable included for 

Yaesu radios. The MFJ-4103 has excellent 

specs and out performs all other 

switching power supplies made for the 


Tiny 10 oz. Switching Power Supply 

for Yaesu FT-817 and QRP Rigs. 

FT-817. Perfect for QRP rigs needing up to 2.89 Amps. 

Works for input voltages 100-240 VAC and power 

line frequencies 47-63 HZ. Use the MFJ-4103 almost 

anywhere in the world by plugging in an AC power cord 

with an appropriate wall plug for that country (Not incl. 

Laptop computer AC cord recommended). 

Overvoltage, overcurrent and overtemp protected. 

Excellent 1% line and 5% load regulation and 1% peak 

to peak ripple/noise. Op temperature is 0-40 o C. 

Mean time between failure is 100,000 hours at full 

load at 25 o C ambient. Meets FCC part 15 class B, UL 

1950 and CSA 22.2. 

MFJ Miniature Travel Iambic Paddle 


1 3 /4Wx1 3 /4Dx 3 /4H inches. 

Full size feel for 

smooth, easy CW. 

Precision formed from 

resilient phosphorous 

bronze. Stainless steel 

base with rubber feet. 3 

foot cord, 3.5 mm plug. 

MFJ Radio Voice Mail 


$ 139 95 

Ship Code A 

switch automatically 

switches your 

HT to transmit when you send CW and 

returns you to your receive signal when 


$ 49 95 

Ship Code A 

Two way radio voice mail 

lets you and your friends or 

family leave and retrieve voice 

messages for each other. 

When in radio range, stay in 

touch 24-hours-a-day no matter 

where you are. Program custom access 

codes and security codes so you can decide 

who uses your Radio voice mail. It’s your 

own private, portable repeater. MFJ-664 can provide emergency 

communications when repeaters are down. 

Test your own signal quality by repeating your transmission 

thru another radio. Automatically repeat recorded message 

continuously. Great for determining band openings, 

foxhunting and public service announcements. 

Non-volatile memory -- up to 2 full minutes of voice 

messages. Keypad can be used for remote operation with 

Morse code verification of functions. End-of-message beep 

and output level control for clean audio. Use 9V battery or 

9-15 VDC or 110 VAC with MFJ-1312D, $15.95. 4Wx3 1 /2 

Dx1 1 /2H inches. Use any radio. With PTT or mic closure 

sensing. Pre-wired cables for Yaesu. (See page 38). 

MFJ JimHandy TM CW Interface lets you use your HT for on-the-air CW Fun 


$ 99 95 

Ship Code A 

you stop keying. 

Built-in speaker, volume control and 

great sounding true sinewave sidetone -- no 

harsh keyclicks. 4Wx1 1 /4Hx3 3 /4D inches. 

Use 9V battery (not included). 

Pre-wired patch cables, $17.95 for 

your HT on page 38. 

MFJ-550 key only, $14.95.

MFJ VHF/UHF MAGNET MOUNT MOBILE ANTENNAS 

Magnet Mount Dual Band 144/440 MHz Mobile 


$ 24 95 

Ship Code B 

This MFJ-1724B is the world’s best selling 

dual band 2 Meter/440 MHz magnet mount 

mobile antenna! It’s perfect for your dual 

band mobile or HT. Free BNC handheld 

adapter. MFJ’s powerful 3 1 /2 inch magnet base holds your 

antenna firmly even at highway speeds. The base has a 

scratch resistant rubber guard to protect your car. The 

MFJ-1724B black stainless steel whip looks like an attractive 

cellular antenna. Only 19 inches tall, you can park in 

your garage without knocking is over. Low SWR across 

both bands keeps your transceiver safe from overheating. 

Get excellent gain on 440 MHz band and 2 Meters. 

Handles 300 Watts PEP. 15 feet coax, PL-259. 

Power*Gain TM Dual Band 144/440 MHz Mobile 

MFJ’s Power*Gain TM is ham radio’s most 

powerful dual band magnet mount mobile 

antenna! Outstanding gain on 440 MHz and 

2 Meters. Low SWR lets your rig deliver full 

power safely. Get a whopping 2.6 dB gain on 2 Meters 

and 6.3 dB gain on 440 MHz. Perfect for dual band 

mobiles or HTs. Free BNC adapter. Handles 300 Watts 

PEP. MFJ’s exclusive 27 1 /2 inch stainless steel SlimLine 

Radiator TM minimizes wind vibration for less SWR flutter 

giving you longer range and better readability. Inculdes 

12 feet of coax with PL 259 Connector, heavy duty magnet 

mount. MFJ-1723, $39.95. Similar to MFJ-1729, 

covers 220 MHz, 2.6dB gain. 22.5 inch radiator. 

MFJ 5/8 Wave 2/6 Meter Magnet Mount Mobile MFJ Glass Mount Dual Band 144/440 Mobiles 


$ 26 95 

Ship Code B 

MFJ-1728U/M/T 

$ 24 95 

Ship Code B 

MFJ’s 5/8 wave on 2M 

give you the maximum possible 

theoretical gain of any sin- 

gle element mobile antenna, no matter how much others 

cost. On 6M, it is a high performance full quarter wave 

antenna. It’s an excellent companion for your MFJ-9406 or 

other 6 Meter mobile or HT. Gives you great “magic band” 

signals used mobile or as a base station antenna. It’s perfect 

for your mobile or HT. MFJ-1728B comes with a free BNC 

adapter. It’s rated at 300 Watts PEP. Low SWR lets your 

transceiver deliver full power safely. Heavy duty magnet 

mount holds your antenna tight at highway speeds. 12 ft. of 

coax. Stainless steel radiator will endure years of harsh 

mobile use. Handy Allen wrench included. 

NEW! Order the popular MFJ-1728B without a magnet 

mount and mount to your existing mount. Order MFJ- 

1728S for SO-239 connector, MFJ-1728M for NMO con- 

nector, and MFJ-1728T for 3/8-24 threaded connector. 


(left) is an 

UltraLiteTM Mobile magnet 

mount 

antenna. 12 ft. 

RG-174U coax. 

1/4 wave on 2-Meters. 

Weighs less than 2 oz. 1/8” 

rare earth magnet. Thin 20 

inch flexible whip. BNC. 

MFJ-1722, (right) is similar 

to MFJ-1721, but dual 

Band UltraLiteTM MFJ UltraLite 

. 5/8 

Wave on 440 MHz. 1/4 

Wave on 2 Meters. 

MFJ-1722S, similar to 

MFJ-1722 but has SMA. 

TM 

Mag Mounts 

MFJ Mobile Antenna 

Ground Plane Kit 


Two Meters 

$ 95 12 

Ship Code A 

MFJ-1722/S 

Dual Bander 

$ 95 14 

Ship Code A 

MFJ-1401 converts 

most mobile 

antennas into a 

ground plane base 

station antenna. 200 

Watts. Accepts 

VHF/ UHF mobile 

antennas with PL- 

259 connector. 

Includes stainless steel mounting 

hardware, two hose clamps, allen 

wrench, and four 20.5 inch radials. 

Easy installallation: 61 MFJ-1401 

$ 95 29 

/4” tall 

bracket fits on any 2-inch pipe 

MFJ Classic HamGear TM Apparel 


Durable HT pocket with 

elastic cord and velcro 

closure fits on your belt 

-- keeps radio secure. 

MFJ-6200, $19.95. This MFJ 

waistpack is the perfect hamfest, 

DXpedition or field day 

hands-free carry-all. It has an 

amazing 9 spots to put your 

ham radio gear, tools, accessories, 

refreshments, etc. 


$29.95. 


Radio chest 

harness 

holds your 

handheld 

radio or cell 

phone 

snugly for 

no worries, hands-free operation. 

Great for rugged action 

use like DX peditions, field 

day, biking, hiking, hamfests, 

search & rescue, etc. Accessory 

pockets. One size fits all. 

A 


$ 39 95 

Ship Code B 

B 

MFJ-7716, $4.95 

each. SMA female 

to BNC male adaptor. 

A MFJ-1734 

Dual Bander 

$ 44 95 

Ship Code B 

B MFJ-1738 

2-Meters 

$ 95 34 

Ship Code B 

Glass mount dual band 144/440 

MHz mobile. A 6 inch counterpoise 

mounted inside lowers SWR and 

makes tuning easy. 

Excellent gain on 440 MHz and 2 

Meters. Low SWR lets your transceiver 

deliver full power safely. 

MFJ’s Exclusive 26 inch stainless 

steel radiator minimizes wind vibra- 

tion for less SWR flutter. 

Gives you much longer range and better readability. 

Handles 50 Watts. 12 Ft. tough coaxial line, 

cleaning pad and mounting hardware. 

MFJ-1738, $34.95. Similar to MFJ-1734 but 2 

Meter mobile glass mount antenna. 

MFJ-94, $4.95. Remount Kit for Glass Mounts. 

Avoid factory tint placement. 

MFJ Handheld Antenna Window Mount 

MFJ-310/MFJ-310S This Handheld Antenna Window Mount 

$ 95 gets your antenna outside where it can radiate 

19 

Ship Code A 

freely -- takes away the auto shielding effect 

and gives increased signal strength and reception. 

Use 144/440 MHz handheld radio with BNC or 

SMA connector. Includes 10 feet of mini RG-58 

coaxial line. The indoor portion of the mount 

safely rolls up inside your auto’s window. Your 

antenna is mounted outside where it can radiate 

freely and provide you with great performance! 

Order “S” for SMA connector. 

SMA/BNC Cables and Adaptors 

A. B. 

Release strain on your HT’s 

antenna connector! Choose SMA or 

BNC. Flexible, mini coax, 3 foot. 

MFJ-9-102, $3.95. 

Porcelain MFJ Coffee Mug 

with Ameritron, Hygain, 

Cushcraft, Mirage and 

Vectronics on other side. 

Great with your favorite hot 

or cold beverage, but clean it 

out before drinking. 

Warranty doesn’t apply. 


each. SMA male to 

BNC female adaptor. 


each SMA male to 

SO-239 

adaptor. 

MFJ Coffee Mug MFJ Gift Certificates 

One year 

Warranty does 

not apply! 

A. MFJ-5612S, $14.95. 

SMA Male to SO-239 adapter cable. 

B. MFJ-5612B, $14.95. 

BNC Male to SO-239 adapter cable. 

MFJ can make that special day 

for your lovable ham even more 

special! 

MFJ Gift certificates are available 

at any time -- Christmas, 

Valentines Day, Birthdays, just for 

the heckuva it, whenever. 

Call 1-800-647-1800. 

Any gift amount can be purchased 

for your ham loved one or 

buddy. 

Use your credit card, paypal 

account or simply send personal 

check or money order. 


MFJ RuffRiderTM High Gain Mobile Antennas 

RuffRidersTM feature the 

finest quality construction using 

precision machined components. 

RuffRidersTM battle the elements, 

handle rugged rides and day-today 

highway abuse. 

Each has a PL-259 base 

mount for quick installation to 

your heavy duty SO-239 magnet, 

trunk/hatch, gutter or mirror 

mount. A free NMO adapter is 

included for use with an NMO 

mount. MFJ tri-magnet mount is 

recommended for big antennas. 

Choose from several different 

length and gain antennas . . . 

RuffRider 

JuniorTM . 

Premium, short 161 antenna fits in any garage on any 

auto. 

/2” 

1 /4 Wave on 2 Meters, 1 /2 

Wave, 3 dB gain on 440 

MHz.100 Watts. No fold-over. 

MFJ-1402B, $29.95. Black. 

RuffRider High PowerTM . 

Just 40” long handles full 200 

Watts. Great for high 

power mobile amp. 1 /2 

Wave, 3 dB gain on 2 

Meters, 5 /8 Wave, 5.5 

dB gain on 440 MHz. 

MFJ-1412B, $29.95. Black. 

RuffRider High GainTM .411 /2” 

long antenna gives extra gain 

with little height increase. 

150 Watts. 1 /2 wave, 3.2 

dB gain on 2 M, 5 / 8 

Wave, 5.7 dB, 440 MHz. 

MFJ-1422B, $34.95. Black 

RuffRider Hyper GainTM . 

621 /2” brute gives a whopping 5 

dB gain on 7 /8 Wave 2 

Meters, 5 RuffRider Triple Threat 

/8 Wave, and a 

monster 7.6 dB gain on 

440 MHz. Our highest 

gain dual band antenna will work 

wonders. Handles 150 Watts. 

MFJ-1432B, $49.95. Black. 

TM . 

59 inches of stacked elements 

with high-Q phasing 

coils give a whopping 

7.2 dB gain on 440 

MHz, 4.5 dB on 2 

Meters and 2.15 dB on 6 Meters. 

Handles 150 Watts. 

NEW! Covers 220 MHz! 

RuffRider Triple ThreatIITM . 

Slim 38 inches, similar 

to MFJ-1436, but 2.15 

dB on 2-Meters, 3.5 dB 

on 220 MHz, and 6 dB 

gain on 440 MHz. 100 Watts. 

RuffRider QuadBanderTM . 

Covers VHF/UHF & 10 Meters! 

52”, 7.2 dB - 440 MHz, 

4.5 dB - 144 and 2.15 

dB on 6. Go HF with 

10 Meters! 150 Watts. 

RuffRiderTM Use 

E. 

any SO-239 

Most RuffRiders 

or NMO 

mount. 


FREE NMO 

$ 95 

adapter! 

59 Ship Code B 

B. 

MFJ-1412 

$ 95 

F. 

29 

Ship Code A 


$ 95 79 

C. 

Ship Code A 


G. 



$ 95 99 

Ship Code B 

D. 

H. 

40 through 6, 


MFJ-1456 Plus 144/440 MHz! 

$ 95 

$ 95 Covers 40/20/15 

49 149 /10/6/2 Meters & 

Ship Code B 

Ship Code B 440 MHz! Use up 

to 4 coils at one time. See page 

A. B. C. D. E. F. G. H. 

41 for more details. Tri-magnet 

Shown on magnet mounts, not included. 

mount recommended. 

TM come with MFJ’s 

90 degree “fold-over” feature -- lets 

you pull into your garage without 

knocking your antenna over! 

MFJ’s RuffRiderTM High 

Gain multi-banded antenna 

series is for serious mobile 

hams demanding highest 

quality at low prices. 

MFJ-1402 A. 

$ 95 29 

Ship Code A 

New models in Black!!! 

MFJ-844 VHF/UHF SWR 

Mobile Power Meter 

MFJ-844 covers 144 and 440 MHz. 

Insertion loss is 0.3 dB or lower with 50 

Ohm impedance. SO-239 connectors. Tiny 

size lets you put it just about anywhere in 

your operating position. 3 

HT SWR/Power Meters 

MFJ-840 accurately checks the 

power output of your 2-Meter 

HT into a 50-Ohm dummy load. 

Also checks battery charge. 5 

Watts full scale. BNC connector. 

3 /4Wx3H x11 /4D in. 

Handles 200 Watts and measures SWR 

and Power in three power ranges: 15W, 

60W, and 200W. A multi-colored white, 

orange, and black meter face makes for 

easy reading in quick glances. 

Extra large, highly visible meter. Diecast 

metal, quality connectors for years of use. 


$ 29 95 

Ship Code A 



Compact 2Wx21 /4Hx11 /2D inches 

can go with you anywhere. 

MFJ-841, $49.95. Ship Code A. 

This connects directly in-line 

be-tween your HT and antenna. 

Reads SWR up to 6:1 and power 

output to a full 5 watts. A threeposition 

toggle switch selects 

SWR, SWR set, or forward 

power. Compact 2Wx2 1 /4Hx1 1 /2D 


MFJ-916B HF/VHF/UHF 

Duplexer handles 200 Watts 

MFJ-916B This 

$ 95 duplexer 

24 lets you 

Ship Code A use HF or 

2 Meter/440 MHz 

antennas with separate 

HF or 2 Meter and 

440 MHz rigs without 

a built-in duplexer. 

Also use two dual 

band antennas with a 

dual band rig with 

only one RF output. Heavy-duty diecast 

enclosure houses low pass networks that 

separate/combine 144/440 MHz signals. Low 

loss SO-239s. 50 Ohm ports, 200W PEP. 

MFJ-916BN, $29.95. Same as MFJ- 

916B, but has low loss type “N” connectors 

instead of SO-239. 

More duplexers/triplexers on page 36. 

Antenna Mount Adaptors 

3/8-24 to NMO 

3/8-24 

Quick Connect 


$ 6 95 

Ship Code A 


$ 6 95 

Ship Code A 

3/8-24 

to Foldover 


$ 11 95 

Ship Code A 

PL-259 to 3/8-24 


$ 16 95 

Ship Code A 

NMO to 

SO-239 Adaptor 


$ 6 95 

Ship Code A 

More 

Connectors 

on page 66. 


MFJ 5/8 Wave 2/6 Meter 

Mobile Antenna 

3/8-24 Mount 2M/440 MHz 

Dual Band Whip Antenna 

MFJ-1414 is a tall 58 1 /2 inches. It’s a 

3/8-24 Stud-Mount Dual Band Whip 

antenna with 2.15 dB gain on 2-Meters 

(1/2 wave) and 3.5 dB gain on 440 MHz. 

Handles 200 Watts. Sleek, stainless 

steel, heavy duty construction (no plastic 

coils to break). 

Lets you use just one 

mount for all of your 

HF/VHF/UHF antennas. 

MFJ’s 5/8 

wave on 2 

Meters gives you 

the maximum 

possible theoretical 

gain of any 

single element 

mobile antenna, no matter how 

much other fancier antennas 

might cost. 

The MFJ-1728 S/M/T is a 

whopping 53 inches for a superradiating 

performance. It’s built 

for mobile performance too, so 

you’ll get years of dependable 

service. 

On 6 Meters, it is a high performance 

full quarter wave 

antenna that gives you great 

“magic band” signals used 

mobile or as a base station 

antenna. 

It’s rated at 300 Watts PEP. 

Low SWR lets your transceiver 

deliver full power safely. 

A. Order MFJ-1728M for NMO. 

B. Order MFJ-1728S for SO-239. 

C. Order MFJ-1728T for HF-style 

3/8-24 threaded connector. 

A B C 

New! 

MFJ-1728S/M/T 

$ 24 95 

Ship Code B 

MFJ-1414 

$ 95 19 Ship Code C

MFJ Magnet, Mirror & Trunk Lip Mobile Antenna Mounts 

MFJ 5” Magnet w/Coax 

These 5-inch super strong magnet 

mounts have 17 feet of coaxial line terminated 

with PL-259 connector. Choose SO- 

239 (BS) or NMO (BM) for your 

VHF/UHF antennas or 3/8-24 threaded 

(BT) for your HF antennas or other type 

antenna with a 3/8-24 connector. All MFJ 

magnet mounts are jet-black in color. 


SO-239 

$ 34 95 

Ship Code A 

MFJ’s RuffRider TM 

Mounts feature extrawide 

four inch lip and 

large reinforcing tabs on 

each side safely distributes 

load over your 

vehicle’s lip. They each 

can rotate 360 degrees 

to allow you to put your 

antenna in every possible 

configuration. 

Two large set screws 

on each end locks your 

mount into place. A 

scratch proof rubber 

guard protects your 

vehicle’s finish. 

Secures large 

VHF/UHF and medium 

size HF antennas. 

Adjustable angles. 

Perfect for MFJ’s large 

RuffRider TM VHF/UHF Antenna 

series or MFJ’s Hamtenna TM 

HF whips. 

Has 10 feet of low loss 

coaxial line and each is terminated with a 

PL-259 connector. 

Allen wrenches and 

weather protection caps 

are also included. 

MFJ-345S, $34.95. 

Has SO-239 connector. 

MFJ-345T, $39.95. 

MFJ-341S 

SO-239 

$ 19 95 

Ship Code A 

MFJ-335BS 

SO-239 

MFJ-335BM 

NMO 

MFJ-335BT 

3/8 - 24 

For HF sticks 

Has HF style 3/8x24 

threaded connector. 

MFJ-345M, $39.95. Has 

NMO connector. 

MFJ Hard 

mount coaxial line 

is 16.5 feet, terminated 

in either an 

SO-239 or NMO 

connector on antenna 

end. For those 

wanting a permanent 

antenna position. PL-259 to radio. 

Each 

$ 95 15 

Ship Code B 

MFJ-341M 

NMO 

$ 19 95 

Ship Code A 

MFJ Triple Magnet 

Three super-strong 5-Inch Magnets make 

up this MFJ Goliath TM Tri-Magnet Mount. 

MFJ-336 has three super strong 5-inch 

magnets bolted to a 1/4 inch triangular 

mount. 17 feet of coaxial line is terminated 

with a PL-259 connector. Caution: once 

on, it’s difficult to get it back off! Select 

SO-239, NMO or 3/8x24 threaded. 

These Deluxe Trunk/ 

Hatchback Lip Mounts 

are heavy-duty -- each 

has a wide 3.3 inch lip 

and reinforcing tabs on 

each side to safely distribute the 

antenna load. 

The MFJ-348 series have a 

360 degree rotation and a 180 degree leftto-right 

flexibility. A convenient thumb/finger 

lay-over knob lets you lay down your 

antenna to clear garages and low over- 

MFJ-348T hangs -- several posi- 

3/8x24 tion detents in either 

$ 95 direction. 

42 Scratch-proof rub- 

Ship Code A 

ber guard protects your 

vehicles finish. E 

Each has 17 feet of coaxial 

line terminated with a PL-259 

connector. 

The MFJ-348 series will secures large 

VHF/UHF antennas and medium size HF 

antennas including HF sticks. 

MFJ-348M Allen wrenches 

NMO and weather protec- 

$ 95 tion caps are includ- 

42 ed in the packages. 

Ship Code A 

MFJ-348S, $36.95. SO-239. 

MFJ-348T, $42.95. Has HF 

style 3/8-24 threaded connector. 

MFJ-348M, $42.95. NMO connector. 

This tough MFJ GumDrop TM 

3/8-24 antenna hard mount is perfect 

for those looking for a permanent 

position for their HF antennas. 

Made of durable plastic, it 

will give years of use. A rubber 

seal protects your vehicle finish. A 

small hole is drilled to accommodate 

the SO-239 bottom connector. 


$ 9 95 

Ship Code A 

MFJ-333BS 

SO-239 

MFJ-333BM 

NMO 

Each 


These 3-inch black magnet mounts have 

17 feet of coaxial line terminated with a 

PL-259 connector. Choose SO-239(BS) or 

NMO (BM). Perfect for lightweight 

VHF/UHF Antennas like MFJ-1412. 

Get your HT antenna outside of the vehicle! 

MFJ-332S, $14.95. HT Antenna Magnet 

Mount with SMA on each end. 12 ft. 

flexible RG-58AU coax. 

MFJ-332B, $14.95. Same 

as MFJ-332S but has BNC 

connector on each end. 

Trunk/Hatch Lip Mounts MFJ Deluxe Lip Mounts Mirror/Rack/Pipe Mounts 


3/8x24 

$ 39 95 

Ship Code A 


NMO 

$ 39 95 

Ship Code A 

MFJ Hard Mount Coax 

GOLIATH 


SO-239 


NMO 

ULTIMATE 

STRENGTH 

$ 34 95 Each Ship Code C 


SO-239 

$ 36 95 

Ship Code A 


3/8x24 

MFJ-346M NMO mini lip mount, 

$ 95 stainless steel, 17 feet 

24 Ship Code A coaxial cable terminated 

with PL-259 connector. 

Rubber cushion protects surface from scratches. 

GumDrop TM 3/8-24 Mount 

MFJ 3-Inch Magnet Mount 

2 1 /2” HT Antenna Mag Mounts 


$ 9 95 

Ship Code A 

MFJ-342T is a 3/8-24 

threaded HF antenna pipe/mirror 

mount that holds MFJ’s 

HF mobile HamTennas TM or 

any 3/8” style whips steady 

on your automobile’s mirror, 

luggage rack or other pipe. 

Hard aluminum clamps can 

mount to a 1 /4 or 1 /2” pipe. SO- 

239 connector w/lock washer 

feeds coaxial line underneath 3/8 

inch connector. Coax not included 

with this unit. 

New! MFJ-342S is similar 

to MFJ-342T, but has SO-239 

connector and includes 17 

feet of coaxial line terminated 

in a PL-259. 

MFJ-344 is 

similar to 


$ 95 MFJ-342T, but is 

14 a vertical mount 

Ship Code A 

for 3/8-24 threaded 

HF antennas. 


$ 9 95 

Ship Code A 

Deluxe Mirror/Pipe Mount 

MFJ-340S/M 

SO-239 

$ 34 95 


Deluxe 

RuffRiderTM Ship Code A 

S M 

Mirror/ Pipe 

Mount attaches on a support rod of your mirror, 

luggage rack or spare tire carrier of your 

vehicle (up to 5/8” in dia.). 

Secures large VHF/ UHF and medium size 

HF antennas with a PL-259 connector. Two 

axis of rotation position your antenna to any 

desired angle. 

Serrated swivel joint locks secure with 

huge 3/8” set screw. A convenient thumb/finger 

turn knob. 10 foot coax with PL-259. 

Has 17 feet of coaxial line is terminated 

with a PL-259 connector, Allen wrenches and 

weather protection caps are included. 

MFJ-340S has SO-239 connector. 

MFJ-340M has NMO connector. 


MFJ 5/8 Wave 2M Ground Plane 

For an incredible $34.95, you get a 300 Watt 5/8 Wave ground plane 2 Meter home station antenna. 

Other 5/8 wave ground planes can’t work any better -- no matter how much they cost . . . 

Look at all you 

get at an incredible 

$34.95! 

You get a 300 

Watt 5/8 wave ground 

plane base antenna for 2 

Meters that gives you the 

maximum possible cal- 


$ 34 95 

Ship Code B 

culated gain of any single element antenna. 

Other 5 /8 waves can’t work any better -no 

matter how much they cost. 

You get shunt fed matching network for 

Dual Band 144/440 Ground Plane 


$ 39 95 

Ship Code A 

lowest possible SWR over entire 2 Meter 

band. Plus, it bleeds off unwanted static. 

You get MFJ’s RapidTuneRadiator TM for 

quick accurate tuning. 

You get a ceramic insulator for low RF 

loss. Result? Maximum radiated power is 

achieved. 

Easy installation to any 1 to 1 1 /2 inch 

mast, (not included) with a single U-bolt 

(included). 

You get strong lightweight aluminum 

construction that’s protected by MFJ’s 

MFJ’s dual band 144/440 ground 

plane antenna is small, lightweight and 

super easy to mount to any 1 to 1 1 /2 inch 

mast, (not included) with a single includ- 

ed U-bolt -- you’ll have it up and operating anywhere 

in just minutes. Great for backpacking. 

Mount it inside to get on-the-air quickly. You get 

extra long range on 440 MHz with a high gain halfwave over quarter 

wave antenna and solid 1/4 wave performance on 2 Meters. 

Ground plane is sloped to give low SWR across both bands and 

to minimize feedline radiation. This gives you more useful radiated 

power, reduced TVI and noise pickup by the coax shield. 

Improved 1/4 Wave Ground Plane 


$ 29 95 

Ship Code A 

For $29.95, you get an improved 300 

Watt 1/4 Wave Ground Plane for 2 

Meters that’ll bring up repeaters as well 

as or better than any 1/4 wave ground 

plane -- even if it costs twice as much. 

The improved MFJ 1/4 wave ground plane minimizes 

feedline radiation for more useful radiated 

power, reduced TVI and noise pickup by the coax shield. 

You get MFJ’s Fast-Tune-Radiator TM that makes tuning to your 

favorite part of the band a snap. U-bolt and mounting hardware 

included. Easy to install on 1 1 /2” mast. Can be cut for 220 or 440 

MHz. A cutting chart is included. 

Portable 3-element 2-Meter beam 

Unique design lets you set it up or take it down in 

seconds! Elements simply screw into the boom. Easy to 

store and sturdy enough to use as your base antenna. 

Center mount it and use it vertically on FM or horizontally 

for SSB. By rotating it you can minimize 


$ 54 95 

Ship Code B 

QRM. You can also mount it vertically or horizontally 

on the leg of a tower . . . great for Packet and PacketCluster TM . 

Compact 2 3 /4 foot boom gives you calculated gain 

within 1 dB of a four element Yagi with a boom nearly 

twice as long. Extra thick elements maintain high gain 

and directivity over virtually the whole 2-Meter band. Ferrite choke 

balun gives excellent feedline decoupling. Coax coupling is further 

reduced by mounting the SO-239 connector behind the reflector. 

Weighs just 2 lbs. Boom is 30 1 /2x1 3 /4x1 1 /4 in. Mounts easily to 

mast or tower leg with single included U-bolt. Mast not included. 

Stacked 2-Meter 5/8 Wave 

MFJ’s stacked 5/8 wave radiators give you 

more than twice the omni-directional gain of a 

single 5/8 wave radiator! Wide 10 MHz 2:1 

SWR bandwidth . . . excellent ferrite choke 

balun feedline decoupling . . . shunt choke for bleeding off 

unwanted static . . . strong lightweight aluminum. Works as 

an excellent 6 Meter full half-wave centerfed antenna. Great 

for MFJ’s 6 Meter radios! Mounts vertically for FM/packet 

or horizontally for SSB. U-bolt (included) to any 1 to 11 MFJ-1764 

$ 95 59 

Ship Code B 

/2 

inch mast or tower leg. MFJ-1766, $124.95. Gives you four 

times the gain of a single 5/8 wave. 2 MFJ-1764 antennas, phasing 

cables. Double gain on 6M. 

MFJ-1765, $39.95. Includes phasing cables for two MFJ-1764s. 


PermanentMolecularBonding Technology 

TM . This super durable finish actually 

bonds itself to aluminum molecules -- it 

won’t come off unless metal comes off! 

You get MFJ’s famous No Matter 

What TM one year limited warranty. 

Just $34.95 gets you the most incredible 

value in a 5/8 wave base station ground 

plane. Remember, other 5/8 wave ground 

planes can’t work any better. 

MFJ-1750, $34.95. 2 Meter 5 /8 Wave. 

MFJ-1752, $34.95. 220 MHz 5 /8 Wave. 

MFJ Dual Band 144/440 MHz Yagi 


$ 89 95 

Ship Code B 

MFJ-1760 gives a whopping 8 

dBi gain on 2-Meters and 6 dBi 

gain on 440 MHz. Has 3-elements 

on two meters and 5-ele- 

ments on 440 MHz. Requires only one feedline 

for true dual band performance. Point in 

direction of your QSO for more direction of 

your output power. This reduces interference 

and increases signal strength. Has 17 dB 

front-to-back ratio on 2-Meters and 10 dB on 440 MHz. Handles 

500 Watts. The longest element is 40.5 inches and the boom is 45 

inches. Mast diameter is 1.5 inches. Weighs just 2 pounds. 

MFJ 7 element 144/440 MHz Yagi 


$ 99 95 

Ship Code C 

Get 7 elements on 440 MHz 

and 4 elements on 2 Meters. 

Exclusive dual band balanced 

feed with FerriteChoke TM 

decoupling prevents pattern skewing-- gives 

low SWR. 1/4 inch diameter driver elements 

give wide bandwidth. National Bureau of Standards design is optimized 

for maximum gain, high front-to-back, clean symmetrical 

pattern. Mounts vertically for FM/Packet or horizontally for SSB 

with single included U-bolt on 1 to 1 1 /2 inch mast or tower leg. 

Includes a 5 foot, 1 1 /8 inch diameter boom, antenna weighs in 

at 2 pounds. Elements are electrically isolated from boom. 

MFJ 2-Meter wide-band Yagi 

Covers the entire 2-Meter Band from 144-148 MHz 

Our versatile 

new six-element 

MFJ-1852 2- 

Meter Band 

Spanner Yagi 

delivers 10-dBi 

gain, 20-dB 

front-to-back 

ratio, and covers 

144 to 148 MHz 

plus WEFAX 

and MARS with 

rock bottom 


$ 95 69 

Ship Code C 

New! 

SWR. Best of all, there's no power-robbing matching network or 

finicky tuning adjustments because it's CAD optimized for fullband 

operation using the latest advanced algorithms! 

Whether you're working weak-signal CW, SSB, digital, satellites, 

or FM, you'll appreciate the MFJ-1852's compact small size, 

light weight (3.5 lbs.), and stealthy good looks. You’ll love the way 

it performs, with consistently low reflected power, high directivity, 

and superb rejection of unwanted noise/interference. 

MFJ-1852 makes a great antenna for the home QTH, but it is 

also perfect for vacation spots, emergency shelters, field day camp, 

and rover excursions. The boom is 3’ long and the longest element 

is 41”, so it’s easy to pack away on your next trip. Handles 600 

Watts. Has SO-239 feedpoint. If serious about staying in touch, 

why not pick one up to cover all of your "bases". 

It's the perfect plug-and-play solution!

MFJ Pulsar TM 6M/VHF/UHF/1.2 GHz Base Antennas 

New! 

MFJ’s Pulsar TM Base/Repeater 

Antenna series is built to last! 

Heavy duty fiberglass radomes and 

overlapping shells add strength and 

stability. Stainless steel hardware and 

waterproof joints elliminate moisture 

and pollution. Super high wind load 

resistance. 

MFJ-1526 - $149.95. Pulsar 

ULTRA MightyGain TM . Dual Band 

144/440 MHz Base/Repeater 

Antenna. Our highest gain Pulsar TM 

antenna. Great 8.3 dB on 2 Meters 

and 11.7 dB on 440 MHz. 17 ft., 

shipped in two sections. SO-239 

Connector, handles 200W. 

MFJ-1526N - $149.95. Same as 

MFJ-1526, has “N” connector. 

MFJ-1524 - $119.95. Pulsar 

Hyper MightyGain TM . Dual Band 

144/440 MHz Base/Repeater 

Antenna. You get high gain with lit- 

MFJ 6-Meter Moxon Ant 


$ 95 69 Ship code B 


$ 59 95 

Ship code C 

MFJ’s 6- 

Meter 

Moxon 

for limited 

space 

features 

low SWR and a broad cardioid pattern with 

5.5-dBi forward gain, high front-to-back 

ratio. Element span is a compact 7 feet on a 

34” boom with turning radius of under 4’. 

It’s winter-storm tough but extremely lightweight, 

under 5 lbs. Feedpoint is an SO-239 

pigtail. It's the perfect choice for getting on 

the "magic" band as the sun spot count rises 

and legendary band openings return. Also, 

it’s your best choice to take on those exciting 

mountain-topping and rover adventures! 

New! 

MFJ 10-Meter Moxon Ant 

Handles 

1kW 

Handles 

1kW 


$ 95 84 Ship code B 

This rugged close-spaced 2-element Yagi 

has a driven element and reflector with the 

tips folded toward each other to minimize 

turning radius. Spans a mere 12’ on a lightweight 

50” boom. Weighs just 8 lbs., yet 

delivers an amazingly clean cardioid pattern 

with 3.3 dBi forward gain and 30 dB of 

interference killing front-to-back rejection! 

Mount anywhere using lightweight TV 

antenna hardware. SO-239 pigtail feedpoint. 

Ultra wideband 

antenna 

receives 25- 

1300 MHz. 

Perfect for scanners. 

Transmit 50-1300 MHz. 

Handles 200 Watts. Ideal for 

6/2/1 1 /4 Meters, 70/33/23 CM 

ham bands. Excellent for 

testing various transmitters 

on single coax. Includes 

tle weight. Just 10 feet tall. Features 6.5 

dB gain on 2 Meters and 9 dB gain on 

440 MHz. Shipped in two sections. SO- 

239 connector, handles 200 Watts. All 

are ship code C. 

MFJ-1522 - $79.95. Pulsar Economy 

Priced Dual Bander TM Base/Repeater 

Antenna. Only 5.5 ft. tall, but big on 

gain. Get 4.5 dB gain on 2 Meters and 

7.2 dB gain on 440 MHz. Great for 

antenna restricted households and apartments. 

Easy to hide on Balcony or backyard. 

Great Price! SO-239 Connector. 


MFJ-1516 - $99.95. Pulsar VHF 

Base Station TM . The ultimate 2 Meter 

Base/Repeater Station Antenna! Great 

7.8 dB gain is perfect for dedicated 

repeater or home use. 15ft. shipped in 

three sections. SO-239 Connector. 



MFJ 6-Meter Antennas 

MFJ Discone Antenna receives 25-1300 MHz, transmits 50-1300 MHz 

SO-239 connector, 50 feet coax, stainless 

steel elements and mounting hardware. 


$ 95 39 

Ship code C 

Same as 


but transmits 

from 

144 to 

1290 MHz. 

Coax and hardware is 

not included. 

TriBander TM . The Perfect 

Base/Repeater Antenna for VHF work. 

Covers 2 Meters, 6 Meters, and 440 

MHz. You get 2 dB on 6 Meters, 6 dB 

gain on 2 Meters, and 8 dB gain on 

440 MHz. Only 8.2 ft., shipped in two 

sections. SO-239 Connector. Handles 

200Watts. 

Quadbander covers 6 Meters 

and 144/220/440 MHz 


Quad-Bander TM. . Like MFJ-1536, but 

covers 6M/144/220/440 MHz. 

MFJ-1532N - $99.95. Pulsar 

VHF/UHF and 1.2 GHz TriBander TM 

Base /Repeater Antenna. VHF operation 

plus exciting 1.2 GHz!! 4.5 dB gain on 2 

Meters, 8.3 on 440 MHz, and a whopping 

11.7 dB 1.2 GHz. 5 1 /2 ft. Type “N” 

connector. Handles 200 Watts. 

MFJ 6-Meter Yagi MFJ 6-Meter Vertical 

This super lightweight 6 Meter 

Yagi will quadruple your effective 

radiated power over a 1/2 


$ 95 99 Ship code C 

wave dipole. MFJ-1762 has a 6 foot boom 

and three elements. Weighs just 2 pounds. 

Handles 300 Watts PEP SSB. Mounts vertically 

or horizontally. Gives a great front-toback 

ratio. It’s the perfect match for your 

MFJ-9406 6-Meter Adventure Radio TM . 


$ 95 99 Ship code C 


is a omnidirectional 

low-angle 

vertical 

radiator that lets you work plenty of DX in 

all directions, even with low power. 55” 

strong aluminum radiator and four 60 inch 

radials. A rugged adjustable air-insulated 

matching stub lets you obtain a near perfect 

1:1 SWR. Mounts to any 1 to 11/2 inch 

mast with a single U-bolt clamp (included). 

Lightweightand truly portable. 

MFJ 10-Meter Antennas Work the World from 

MFJ 10-Meter Mobile 

New! 

MFJ-1410T 

$ 29 95 

Ship code B 

MFJ-1410T is a superperforming 

10 Meter 

mobile that will give you 

plenty of punch and gain 

for rough-shot mobile 

operation. Explore the exciting world 

of DX from your car or truck with this 

53” stainless-steel radiator. 

It really gets your signal out and 

delivers outstanding received signals. 

Low SWR, handles 300 Watts PEP 

SSB. Has HF-style 3/8-24 threaded 

connector. Use MFJ lip, trunk, mirror 

or magnet mount, see page 61 for your 

choice of mount. 

your Backyard, this 10M 

Vertical is all you need! 

Extremely lightweight 

for portable use . . . 

Low Angle Radiation 

for outstanding DX 

Vertical/Horizontal 

Mounting Bracket . . . 

Ten Meters is Wide 

Open! This 11-foot 

vertical lets you work 

all the DX you can 

handle! Features lightweight 

11-foot radiator 

and two 6-foot radials both made of alu- 


$ 69 95 

Ship Code B 

New! 

minum. Weighs less than 3 lbs., easy to put 

up/take down for DXpeditions or stealth. 

MFJ-1790 has a super low angle of radiation 

to focus your signal where you want it - 

- reduces QRM/Noise and gives great DX! 

Included mast bracket can be turned horizontal 

or vertical -- lets you attach it to an 

existing mast or pole with ease! 

MFJ-1790 covers entire 10-meter band 

(28.0-29.7 MHz), 300 Watts PEP SSB. 

MFJ-9410X, $289.95. Ten Meter 

Adventure Radio with microphone. 


MFJ Ultra-Strong Stainless Steel Telescopic Antennas 

4 models . . . 17, 12, 8 or 4.5 feet Extended 

A B C D 

7/8 Diameter x 2 

Solid Chrome-plated brass 

with 3/8-24 threaded stubs 

The tough, rigid base makes 

the difference, extra durable! 

MFJ’s premium stainless steel 

telescopic whips are the perfect 

choice for building collapsible 

multi-band dipoles, mobiles, 

portable and base antennas. 

They are great for traveling, 

mini DXpeditions, vacations, etc. 

They can also be used to 

replace your current automatic 

screwdriver whip for a more highly 

efficient fixed mobile operation. 

Rigidly collared at the base, 

stronger than plated brass, and 

impervious to rust and corrosion, 

they stand up to the forces of 

nature and the rigors of portable 

operation where others might fail. 

With four models to choose 

from, select the ideal length for 

the frequencies you need to cover. 

The base of each whip features 

a standard 3/8-24 threaded mounting 

stud for installation on mobile 

or fixed antenna mounts like 

MFJ’s lip mounts, magnet 

mounts, tripods and dipole 

mounts. The tough, rigid base 

makes the difference for an extradurable 

antenna system. 

For 1/4 Wave verticals, use 

MFJ-342T or MFJ-344 mounts. 

For dipoles, use two whips with 

the MFJ-347 dipole mount. 

See pg. 61 for 3/8-24 mounts. 

3 /4 long base 

HF Portable/Mobile Manual Screwdriver Antennas 

MFJ's new Manually Tuned Screwdriver 

Antennas let you operate all bands 80-6 M 

continuously including all WARC bands and 

new 60 Meter bands (depends on model). 

An extra long 10 foot (19” collapsed) whip 

lets you really get out and work rare DX! 4½ 

foot (23” collapsed) stainless steel whip is 

included for mobile. Each unit has a highly efficient 

loading inductor. 

For highest Q, the coil is wound with heavy 

gauge wire with wide spaced turns on a mostly-air 

core. A tuning sleeve electrically 

removes turns to eliminate detrimental selfresonance 

effects. The tuning sleeve is on the 

low impedance side of the coil to minimize 

power robbing and detuning stray or hand 

capacitance. Frequency stays put after you 

tune it. A separate movable sleeve adjusts 

frequency. A nylon-tipped thumb-screw locks 

sleeve. Wing nut lets you connect a matching 

capacitor or inductor for 1:1 SWR. 

Use 3/8x24 mount. 200Watts PEP. Add coax, 

connect ground/counterpoise. 

A. MFJ-1979, $ 59 95 

17-foot stainless steel telescopic 

whip is manufactured with a solid 7/8 inch 

diameter by 2 3 /8 inch long chrome-plated 

brass base. 

Has 5/8 inch diameter bottom section 

and .10 inch top section with 5/16 inch 

diameter round ball tip. 

Telescopes for full 1/4 Wave operation on 

20 Meters without loading coil and 

30/40/60/80/160 Meters with loading coil. 

Measures 17 feet fully extended. 10 sections. 

Collapses to 27 inches. 

B. MFJ-1977, $ 44 95 


whip. Replace screwdriver antenna whip 

for highly efficient fixed mobile operation. 

Telescopes to 1/4 Wave to cover FM to 

12/15 Meters. 

Use base loading coil to cover lower 

bands. Solid 3/4 inch diameter by 2 3 /8 inch 

long chrome plated brass base. 5/8 inch 

bottom section, .10 inch top section with 

5/16 inch diameter round ball tip. 

12-feet fully extended. Seven sections. 


C. MFJ-1974, $ 34 95 


whip. Fully extended at 8.2 feet, this whip 

can cover 10 Meters through the FM band 

without loading and lower bands with a 

loading coil. 

Solid 3/4 inch diameter by 2 3 /8 inch long 

chrome plated brass base. 7/16 inch bottom 

section, .10” top section with 5/16 inch 

diameter round ball tip. 

8.2 feet fully extended. 5 sections. 

Collapses to 24 inches for easy travelability. 

Portable Manual Screwdriver Antennas 

Covers 40-2 

Meters with 10 foot 

whip. Covers 

6-20 Meters 


$ 139 95 

Ship Code C 

with 4 ½ foot whip. 12 inches 

long by 2 inches in diameter. 

Weighs one pound. 

PortableVersions 

Uses longer 10 ft. whip for full 

frequency coverage. 


$ 169 95 

Ship Code C 

Covers 80-6 

Meters with 10 foot 

whip. Covers 6-40 

Meters 4½ ft. whip. 

24” long by 2 inches 

in diameter. Weighs just 1.8 pounds. 

MFJ-22, $4.95. Shunt matching 

coil with solder lugs. For use at 

base of mobile/screwdriver antennas 

with high SWR. 

Covers 

80-6 


D. MFJ-1972, $ 1495 4.5-foot stainless steel telescopic 

whip. Great for mobile or base/fixed 

operation. 

Covers 6 Meters, 2 Meters air and FM 

bands. 1/2 inch hex base with 3/8-24 

threaded stud. 9/32” bottom section. 4.5 

feet fully extended. 3 sections. 


10 foot 

telescoping whip 


Telescopic, 10 feet fully extended, 20 

inches collapsed. 7 sections. 

10-Foot whips are durable 1/2 inch 

diameter plated brass. 

Standard 3/8 inch by 24 threaded 

stud for all standard mounts. 

Replace your screwdriver antenna 

whip for a more highly efficient fixed 

mobile operation. 

Telescopes for full 1/4 wave operation 

2 to 12/15 Meters. 

Cover 17, 20, 30, 40, 60, 80, 160 

Meters with loading coil. Use two for 

multi-band dipoles. 

stainless steel 

antenna whips 

Solid stainless steel 108 inch and 72 

inch whips with corona discharge caps. 

Super durable whips for 

mobile screwdriver style antennas. 

Has 3/8x24 threaded stud 

connector. 

B. MFJ-1966, $26.95. 

108 inches. 

C. MFJ-1964, $21.95. 

72 inches. A B/C 

MFJ’s Manually Tuned Screwdriver Antennas let you operate all bands between 80 and 

6 Meters continuously including all WARC bands and the new 60 Meter bands 

(*depends on model). It far outperforms other HF compact antennas! 

Mobile Manual Screwdrivers 


$ 149 95 

Ship Code C 

Covers 

40-2 

Meters 

with 4½ 

foot mobile or 10 foot 

fixed operation telescoping 

whip. Continuously 

adjustable loading coil is 

15 inches long by 2 inches 

in diameter and weighs 

1.3 lbs. 

Mobile Versions 

Get full frequency coverage 

with short 4.5 ft. whip. 

Meters with 4½ foot mobile or 10 foot 

fixed operation telescoping 

whip. 


Continuously $ 95 179 adjustable loading coil Ship Code D 

is 36 inches long by 2 

inches in diameter and weighs 2.6 pounds.

MFJ HF Hi-efficiency Mobile 

Each is ruggedly constructed. A heavy duty 4’, 3/ 8 inch 

diameter fiberglass rod; a nearly indestructible .125 inch 

diameter PH-17-7 stainless steel whip and chrome plated 

brass fittings will give you years of service. It’s sleek, low 

profile construction has low wind loading and its semi-rigid 

fiberglass eliminates the need for springs or guys. 

Black anti-static jacket protects the loading coil and 

blends with any vehicle. Stainless steel whip is adjustable 

for lowest SWR. Push it down to park in the garage or fully 

extend it for maximum efficiency during mobile operation. 

Includes allen wrench and complete tuning and matching 

instructions. MFJ-16XXT HamtennaTM MFJ-1675T - 75 Meters 

MFJ-1660T - 60 Meters 









Whips handle 

250 Watts PEP. Whips are about 7 feet fully extended, and 

collapse to about 4 feet for easy storage. 

Simply screws into any 3/8 x 24 female 

mount for quick band-changing. 

HF mini-Bugcatcher 

Become an “HF Mobileer” 

almost instantly with almost no 

effort! Have tons of fun rag-chewing 

and DXing on the HF bands. 

Turn boring drives into fun-filled 

ham adventures. 

It only takes minutes to attach a 

trunk lip mount (MFJ-345T, 

$39.95), mirror or luggage mount 

(MFJ-342, $9.95) or tri-magnet 

mount (MFJ-336T, $34.95). 

Screw in your MFJ-1624 mini 

bugcatcher HF mobile antenna. 

Throw your rig into your car, 

plug it in the cigarette lighter and 

turn the power down to 20 Watts 

or so (to avoid overloading your 

cigarette lighter; handles 300 

Watts PEP). 

Operate HF mobile and enjoy 

DXing! 

Bugcatcher design uses large 

highly-efficient air-wound inductor 

--it will far out perform other 

compact HF mobile antennas. 

Exclusive built-in inductive 

matching network keeps SWR low. 

5 

MFJ . . . The World Leader in Ham Radio Accessories 65 

1 /2 foot whip collapses to 21 HF/VHF/UHF Mobile 

This new mobile anten- 


na lets you operate all of 

$ 95 89 your favorite 

Ship Code C 

HF/VHF/UHF bands as a 

base station antenna or as 

a mobile. Covers 40/20/ 

15/10/6/2 Meters/440 MHz 

with automatic bandswitching! 

Now you can DX and rag-chew 

just like the big boys with their 

fancy screwdriver antennas at 

almost three times less the 

cost! Use 1 or up to 4 loading 

coils. Adjustable whip for tuning. 

Handles 100 Watts. SO- 

239 connector quickly screws 

onto mirror, luggage or tri-magnet. Antenna 

is 75” with tallest coil mounted vertically. 

Great for Icom-706! Requires Tri-Mag. 

Efficient, base-loaded 

4 

/2 feet 

for easy storage and garages. Base 

loaded for minimum wind load 

and stress. Change bands by moving 

“wander lead”. 3/8 by 24 inch 

mount. 

1 20/40M 4 

/2 foot HF Whip 

Antenna is thin, sleek, 

and low profile with very 

low wind resistance. 

Lightweight. A 3/8x24 

trunk lip or 5-inch magnet mount 

holds it tight and secure. Handles 125 

Watts. Enjoy your road trip on HF! 

Whip collapses to 22 inches for 

easy parking or storage in trunk. 

Easy-on, easy-off 3/8x24 stud. Use 

as center loaded antenna with bottom 

mast to improve efficiency. 

1 /2’ base-loaded 

Telescopic Mobile whips 

41 /2 Foot Extender Mast 

MFJ-1600T, $19.95. 41 MFJ HF Mobile HamTenna Short Mobile HF whips 

Your Choice: Only 25-36”! 



MFJ-2340T - 40 Meters $ 95 

MFJ-2330T - 30 Meters 19 Each 

MFJ-2320T - 20 Meters Ship Code B 


MFJ-2315T - 15 Meters MFJ “Short” HF 


Mobile Whip 


MFJ-2306T - 6 Meters Antennas are designed 

to let you 

mount an HF antenna with just a 5-inch 

$ 95 $ 95 magnet mount. 

14 Each 19 Each 

No need to drill holes or make spe- 

6-40 Meters 60-75 M 

cial hard mounts on your car to get on 

Ship Code B 

HF! Put on a magnet mount or trunk 

lip mount and you are ready to go HF 

mobile! 

These are super low profile and 

makes it easy to go in and out of your 


garage. 

$ 95 

Constructed like the MFJ 

149 “HamTenna” series but stand only 36 

Ship Code C 

inches tall. Collapsible to 25 inches 

Free NMO Adapter! 

for easy storage. Thin, lightweight with 

low wind resistance. Uses 3/8-24 con- 


HF Loading 

nector on a 5-inch magnet or trunk lip 

Coils 

mount. Adjustable stainless-steel whip 

for minimum SWR. Short, mobile HF 

Mount whips handle 250 Watts PEP. 

is not Choose any band 75-Meters through 

included 

6-Meters. Recommended 5” magnet 

mount, MFJ-335BT, $21.95. Trunk lip 

mount, MFJ-345T, $39.95 or the 

MFJ-348T, $42.95. Other 

mounts available on page 61. 


/2 foot long, 3/8 

(20 Meters) 

inch diameter fiberglass/copper conductor 

$ 95 29 

with 3/8x24 male and female mounts on 


ends. Black anti-static jacket. Convert 

(40 Meters) 

base loaded antennas to highly efficient 

center loaded antennas. Use MFJ Bug 

Catcher, MFJ-2620/2640T, MFJ manual 

screwdriver antenna, Hustler or any loading 

coil with 3/8x24 threads. Extend ham 

sticks for efficient fixed station antennas. 

Replacement for broken or bent Hustler 

bottom mast section. Add telescoping 

whip for multi-band vertical. 

TM MFJ 10-band HF/VHF 

Mobile Antenna 

Continuous Wide Band Coverage: 40-2 or 20-2 Meters 

Operate 80, 40, 30, 20, 

MFJ-1699S/T 


MFJ-1654 MFJ-1652. Simply tap a different coil 

17, 15, 12, 10 Meters HF 

$ 95 

$ 95 

$ 95 

area to change the bands quickly. 

mobile and 6 and 2 

79 89 69 

It is super-easy-to-install, both pieces Ship Code C Meters VHF with just one 

20-2 Meters 

40-2 Meters 

screw together and into a 3/8-24 threaded 

amazing antenna! 

Ship Code B 

Ship Code B 

base. Use any standard 3/8-24 threaded MFJ-1699 features low SWR and 200 

This excellent HF Hi-Q Mobile 

mount in lip, trunk, magnet or pipe types. Watts power handling for a super-per- 

Antenna consists of an 8 foot stainless 

See page 61 MFJ mounts. 

forming mobile HF/VHF antenna. 

steel radiator and a Hi-Q air-wound 


Changing bands is super-easy -- just 

loading coil. Handles 1 kW PEP SSB. 

Hi-Q air-wound loading coil change the tap on the “wander-lead” to 

You’ll get outstanding results on both 

only for 20-2 Meters, as used the next band you want to explore. 

transmit and receive. Stainless steel 

on MFJ-1652. 

Maximum height is 65”. 

whip telescopes from 2-8 feet. Easily 

Measures 2 inches 

The PL-259 or 3/8-24 connector 

pack it away when parked to prevent 

diameter by 3” length. 

makes it easy to mount on any type of 

theft or vandalism. 

lip, trunk, magnet or pipe type mount. 

You can use a longer whip, up to 17 MFJ-67, $69.95. 

See page 61 for MFJ mounts. Easily col- 

feet for stationary operation. See pg. 64. Hi-Q air-wound loading 

lapsible for storage. 

It is easily adjustable for 40 Meters coil only for 40-2 Meters, as 

Order MFJ-1699S with PL-259. 

through 2 Meters with the MFJ-1654 or used on MFJ-1654. 2 inches 

Order MFJ-1699T with 3/8-24 stub. 

20 Meters through 2 Meters with the diameter by 6 inches length. 

Whips 

Your Choice: 

New! 12 & 60 Meter Whips! 

New! 

New! 

New!

TarheelAAntennas ntennas 

Little Tarheel . . . 7-54 MHz . . . 200 Watts PEP . . . Dynamite comes in Sma l Packages! 

The Little Tarheel, when properly 

installed on your vehicle, will provide continuous 

coverage from 7.0 to 54 MHz with 

the supplied whip. The Little Tarheel II 

will provide continuous coverage from 3.5 

to 54 MHz with the supplied whip. 

Both antennas, like all of our motorized 

antenna models are built to meet the highest 

standards but in a much smaller size. In this 

case, Dynamite really comes in small packages! 

Sensors are already preinstalled so you 

can add one of the auto controllers below. 

Little Tarheels are designed for the ham who 

wants to enjoy HF mobile but not interested 

in a huge antenna on the car. 

Don’t let the small size fool you, it is 

MFJ Programmable Screwdriver Antenna Controllers 

Programmable Screwdriver Antenna Controller 

10 Memories . . . Super Accurate . . . AutoPark TM . . . StallProtector TM . . . Super bright LEDs 


$ 95 129 

Ship Code A 

Tuning your 

mobile screwdriver 

antenna couldn’t 

be easier! 

Save ten 

favorite screwdriver 

antenna 

positions in memory 

and quickly 

return to any saved position. 

Up/Down buttons let you 

manually move the antenna 

to any desired position. A 

4-digit turns counter gives you precise 

antenna position -- you can see its super 

bright LEDs even in direct sunlight! 

Returning to a position from memory is 

extremely accurate for three reasons . . . 

A. The antenna always moves to its 

desired position from the bottom, insuring 

that the motor is always loaded the same. 

B. MFJ’s exclusive AutoPark TM feature 

automatically bottoms your antenna for 

designed to 

be mounted 

higher on 

the vehicle 

and when 

mounted higher you have much less ground 

losses which equal better performance. It 

also lets you use a more common type of 

mount like the MFJ-336T tri-magnet mount 

or MFJ-345T lip mount. 

You get the same great look as our other 

larger antennas with our Power Coat Paint 

System and our LexanTM TH-1L TH-2L 

$ 95 $ 95 

399 399 7.0 to 54 MHz 3.5 to 54 MHz 

Ship Code C Ship Code C 

Weather Shield -not 

the flimsy stuff that others use. 

Little Tarheel series uses the 

Pittman commercial 12-Volt gear motor. 

parking in your garage and resets and calibrates 

your counter each time to eliminate 

antenna slippage and turns count errors. 

C. The momentum of the moving 

antenna causes it to overshoot its stop 

point. MFJ’s exclusive Dead-OnSTOP TM 

feature automatically reverses the motor 

briefly just before it stops to eliminate 

overshoot and come to a precise stop. 

MFJ’s exclusive StallProtector TM feature 

prevents your expensive motor from burning 

out. Automatically detects motor stall 

and completely shuts off power to motor. 

Motor current can be monitored on 

LEDs for trouble and stall current. 

Compatible with single and dual magnetic 

turns sensors. Requires 12 VDC. 

3 1 /2Wx3 1 /4Hx1 1 /4D inches. Power, motor 

control and sensor lines included. 

Magnetic Sensor Kits for 

MFJ-1922B/1924/1926 

MFJ-82, $29.95. for High Sierra . 

MFJ-83, $9.95. for Hi-Q Antennas. 

66 http://www.mfjenterprises.com • Toll-free 1-800-647-1800 

Without a doubt . . . the best built, best looking, 

best performing screwdriver antennas in the world! 

Screwdriver Antennas and Controllers 

TH-100A-HP . . . 3.4-28 MHz . . . 1.5 KW PEP . . . Pittman 12V Commercial Motor . . . 

TH-100A-HP provides 

continuous coverage 

from 3.4 to 28 

MHz with the 6’ whip. 

This is, without a 

and they will all work the same!). 

Our coil form is 2” diameter and 

made of fiberglass. Other antenna 

builders know fiberglass is better but 

they choose not to use it because of 

doubt, the best built, best looking, expense and difficulty in machining. 

best performing and highest power We use 14 gauge wire for high 

motorized antenna for its size and power capability wound at eight turns 

design on the market. 

an inch for maximum efficiency. The 

Pre-installed sensors lets you add decoupler is CNC machined for tight 

one of the auto controllers below. 

All CNC machined antenna components 

are either aircraft aluminum or 

stainless steel and blue-printed -- (you 

can take 100 antennas apart, mix 

tolerances with custom fingerstock 

designed to contact three turns of coil 

all the time with over 25 pounds of 

combined contact pressure. You can 

run up to 1.5 kW PEP trouble-free. 

them up and then reassemble them TH-100A-HP comes with the 

Pittman 12 Volt commercial grade 

gear motor for the best performance. 

The motor is very durable and 

extremely quiet while receive tuning. 

TH-100A-HP has a LexanTM TH-100AHP 

$ 95 439 3.4 to 28 MHz 

Ship Code D 

stuff used on racecar windshields and 

even used to make bulletproof windows. 

It also uses the Powder Coat 

Paint System -- And folks this is not 

spray paint in a can. You get a finish 

that looks as glossy and will last as 

long as the paint on a new vehicle! 

That’s just some of the effort that 

goes into a Tarheel. You won’t be 

disappointed -- we GUARANTEE it! 

ANTENNA SPECIFICATIONS 

Lower Mast Length 

3 feet 

Whip Length 

6 feet 

Freq.coverage w/6’ whip 3.4-28 MHz 

Power Rating 

1.5 kW PEP 

Get the Package Deal! 

TH-100A-HPKG . . . $549.95 

Includes 100A-HP antenna, 6’ whip, MT-1 bracket 

with whip quick-twist disconnect, 21’ RG8X coax, 

seal, 20’ control cable, manual switch, ferrite decoupling 

core, matching coil, fuseholder/fuse, 3/8-24- 

1 Weather Shield -- this is the same 

Typical SWR 

Total Height w/6’ whip 

(fully collapsed) 

Total Height w/6’ whip 

(fully extended) 

Weight 

1.5:1 or less 

9 feet, 


11 feet 

8 lbs. 

1 /4 stud and silicone dielectric compound. 

Included standard with the screwdriver 

antenna is the whip, 20 feet of plug-n-play 

control cable, manual control box, ferrite 

decoupling core and 3/8-24 threaded stud. 


Lower Mast Size 

Lower Mast Length 

Whip Length 

Total Length (fully collapsed) 

Total Length (fully extended) 

Freq. Coverage (Continuous) 

Power Rating 

Typical SWR 

Weight 

Automatic Screwdriver Antenna 

Controller for Icom TM Radios 

MFJ-1926 is perfect for 

your Icom radio equipped 

with a CI-V interface. 

Connect the controller to 

your Icom radio and the 

MFJ-1924 receives the frequency 

data and will auto- 

matically tune your screwdriver 

antenna. Has all features 

of the MFJ-1924. 


TH-1L 

1.5” 

16” 

32” 

48” 

54” 

7.0-54 MHz 

500W PEP 

1.5 or less 

1.8 lbs. 

TH-2L 

1.5” 

16” 

32” 

48” 

54” 

3.5-54 MHz 

200W PEP 

1.5 or less 

1.9 lbs. 



MFJ Digital Screwdriver Controller 

Tells you exactly where 

your antenna is positioned! 

Re-tune exactly -- fast, no 

more guessing. Super 

bright .40” high-intensity 4digit 

LED display and precision 

micro-controller gives 

digital count range -999 to 

+999. On/off/reset switch for 

easy calibration. 31 /2Wx31 /4H 

x11 MFJ-1922B 

$ 95 109 Ship Code A /4D in. 13.8VDC.

MFJ 10-40 Meters 

Portable Antenna 

DXCC, WAZ, WAC, WAS won with MFJ-1621! 

MFJ-1621 lets you operate anywhere 

-- apartment, campsite, resort hotel, even 

at the beach. Work 40-10 Meters using 

included 54-inch telescoping whip. The 

antenna is mounted on a sturdy, 6x3x6 

inch cabinet. Features a built-in antenna 

tuner, field strength meter, 50’ RG-58 

coax. Handles 200W PEP SSB. 

It’s a complete portable 

multi-band antenna system 


$ 99 95 

Ship Code B 

Portable/Mobile Emergency Communications Center 

Beautifully blend an entire Ham Radio 

Station into your living room! IcomTM 706 

detachable panel and speaker are displayed 

on an attractive compact stand. Put the rig, 

power supply and antenna tuner out-of-sight. 

Hide an unsightly rat’s nest of power cables, 

feedlines and AC cords. Adjustable height 

and tilt for best viewing angle. Optimized 

for highly intelligible speech and CW, the 

MFJ-281 speaker can be tilted for best 

sound. Large soft rubber feet. All hardware 

is included to mount your IC-706 detachable 

front panel (must be mounted on Icom MB- 

63 mounting bracket). 12Wx11 /4Hx41 IC-706 

/8D in. 

TM Presentation Stand MFJ Truck Trailer Hitch 

Antenna Mount 

MFJ-2822 slides into your 

trailer hitch slot and a bolt 

locks it in place. Your trailer 

hitch mount can hold small, 

medium and large HF/VHF/ 

UHF antennas -- you can 

even mount the tiny Tarheel 

Screwdriver HF antenna. 

Heavy-duty aluminum 

construction. Includes large 

nut and bolt. Has SO-239 for 

VHF/UHF antennas and a 3/8-24 

threaded GumDrop 

MFJ Stainless steel License 

Plate Antenna Mount 

Replace your 

license plate with 

the MFJ-2820 and 

remount your 

license plate. This 

gives you a convenient 

no-hassle sturdy antenna 

mount for most 

HF/VHF/UHF antennas -great 

for low garages! Has holes for 3/8-24 

HF mount or SO-239/NMO VHF/UHF 

mount. Braced stainless steel construction. 

Antenna is offset mounted so it does not 

block license plate. Clearance hole for 

lamp. Antenna can be mounted above or 

below license plate. Ground wire holes. 

May not work with all vehicles. 

TM connector 

for HF antennas. 

Removes height restrictions by mounting 

your antenna at the lowest possible point on 

your truck or SUV. 2Wx2Hx101 The MFJ-706/7000 is an Emergency 

Communications (EmComm) box that turns 

your ICOM IC-706 or IC-7000 into an 

instant and foolproof portable/mobile emergency 

communications center. It covers all 

HF, VHF and UHF amaterur radio frequencies 

available on the IC-706 or IC-7000 

popular transceivers. 

It is literally a complete “grab-and-go” 

communications center that can provide a 

full 100 Watts SSB/CW signal simply by 

plugging into any available vehicle cigarette 

lighter socket or light-duty 10 to 15 Amp 12 

VDC power supply. 

An MFJ exclusive PeakPowerBoost 






TM 

circuit delivers instantaneous SSB/CW 

power peaks using several Farads of super 

capacitance. 

A built-in, full range automatic antenna 

tuner turns any random wire or other antenna 

into a highly effective HF antenna. 

Simple foolproof automatic tuning is done 

with a single push of a button. 

A 3/8-24 antenna mount gives you the 

ability to screw on a loaded whip (such as a 

Hamstick) for long range HF communication 

or use a high-gain VHF/UHF antenna 

for local communications. 

The IC-706 and IC-7000 control heads 

can easily be removed and placed in a convenient 

location while the larger MFJ 

EmComm box can be placed in the trunk, or 

on the floor or backseat of your vehicle. It 

is a compact 63 /4Wx41 /2Hx131 NEW! MFJ-7000 for 

ICOM 


$ 95 399 Ship Code D 


$ 95 399 Ship Code D IC-706/mic 

not included. 


When you’re ready to move on, just 

grab the handle and go. The handle is 

positioned so the MFJ EmComm box is 

perfectly balanced for carrying. Tough 

front and back covers secure and fully 

protect all of the enclosed electronic 

gear. 

A convenient compartment stows your 

microphone and other small accessories 

so you are always ready for emergencies. 

The IC-706 and IC-7000 speakers are 

fully exposed so speech audio is always 

loud and clear. 

The transceiver is well ventilated to 

prevent overheating so you can provide 

continuous high-power communications. 

The MFJ-706 and MFJ-7000 can be 

used horizontally, vertically, or at any other 

angle. 

When a sudden emergency arises you literally 

can grab an entire communications 

center, rush to the site, and be in instant 

HF/VHF/UHF communication in minutes! 

Simple, reliable emergency communications 

can easily be provided by any 

untrained personnel. 

TM IC-7000 Rig!!! 



IC-706, mic not included. 

MFJ-1925/I2 

$ 79 95 

Ship Code A 

-- use it in any location. 

3/8x24 threaded connector 

disengages easily and collapses 

to 22” for easy portability. Just 

place in any electrically clear 

location, set the bandswitch, tune the capacitor 

for maximum field strength and operate! 

MFJ lets you use the popular 

Yaesu ATAS series screwdriver anten- 

nas with popular Icom, Kenwood, Alinco, 

and other transceivers. MFJ-1925 I2 

plugs directly into the popular Icom IC- 

New! 

Use any rig with Yaesu ATAS Screwdriver Antenna 

706 transceiver. An Up/Down switch puts the Icom 706 in low 

power and tunes the antenna. MFJ-1925/I2 is simple to install. No 

modification to radio/antenna is needed. SO-239 connectors. 

Order MFJ-1925 I2 for Icom 706. Order MFJ-1925 for 

Kenwood, Alinco and compatibles. 

Whip Tuner/Artificial Ground gives 

instant 80-10M, 150 Watt Antenna 



Just add short whip 

and counterpoise 

wire and 

instantly get an 

effective portable 

150 Watt all band 3.5-30 MHz antenna. 

It's effective, compact and simple to use 

for portable, fixed station and emergencies. 

High power, hi-Q 3-core variable loading 

coil efficiently resonates short whip or 

random wire. Identical inductor tunes 

counterpoise. Operates 30-10 Meters 

with included 4½ foot telescoping whip 

antenna and counterpoise assembly. 

Add longer whip/random wire and 

external loading coil for more efficient 

operation especially on 80- 

30M. 12 foot whip, hamstick, Hustler 

antennas all work great. 

Tune for low SWR with built-in 

reversible L-network. Current balun 

decouples radiating elements. 

Tune for maximum current on RF 

Current Meter to give you maximum radiated 

power and minimum SWR. Sensitivity 

control lets you use QRP to 150W QRO. 

Ultra low capacitance fiberglass antenna/counterpoise 

insulator minimizes 

shunting antenna current to ground for 

maximum radiated power. 

Standard 3/8x24 female connector for 

whip antennas and wing-nut for counterpoise. 

SO-239. 7¼Wx2¼HX2½D inches. 


Like MFJ-1644 but less RF 

Current Meter. 


MFJ Hang & Play TM Collinear Array Antennas 

2-elements, 2 dB gain . . . 4-elements, 4.5 dB gain . . . Handle 1500 Watts . . . Very Quiet . . . 

When Radio was King . . . 

MFJ reached back into time when 

radio was king and brought back to life 

some of the most popular, classic antennas 

that gave the most powerful signals. 

These classic high-performance antennas 

give you a powerful, booming signal 

and needs just two trees to hang and play! 

We have updated them with stronger, 

more durable modern materials, adapted 

some to simple, direct coax feed and made 

them hang and play. 

Two and Four Element Arrays 

These MFJ-62XX single band two halfwave 

element collinear array gives you 

nearly 2 dB gain -- about 150% power gain 

-- and twice the receiving capture area of a 

half-wave dipole. They have direct coax 

feed and low SWR across the entire band. 

The MFJ-64XX four half-wave element 

½ ë ½ ë 

½ ½ 

¼ ë 

SO-239 

for your 

coax to 

transceiver 

COAX TO 

XCVR OR 

SWITCH 

2-Element Collinear Array, 4 models 

MFJ-6215, $44.95. 15 Meter, 46’ hor., 10’ vert. stub. 

MFJ-6217, $49.95. 17-Meter, 54’ hor., 12’ vert. stub. 




Coax feedline is not included. All are Ship Code B. 

collinear array gives you a whopping 4.5 

dB gain -- about 300% power gain. You get 

four times the receiving capture area of a 

half-wave dipole -- you’ll hear DX you’ve 

never heard before! They require a balanced 

line tuner or a tuner with balun. 

Hang and Play TM ! 

You can virtually hang and play TM when 

you receive them. No cutting, soldering, 

tuning, or trimming is required. Just follow 

the easy installation instructions and you’ll 

be up and running in no time! 

They are completely assembled and 

include super strong custom fiberglass center 

insulators, authentic glazed ceramic end 

insulators, heavy duty 7-strand, 14 gauge 

hard copper element wire and extremely 

strong, solderless, crimped construction. 

With larger capture area and power gain, 

you’ll hear & work more DX than ever before! 

68 http://www.mfjenterprises.com • Toll-free 1-800-647-1800 

A pair of these antennas at right angles 

can provide worldwide coverage. These 

arrays radiate bi-directional perpendicular 

to the wire and handle full 1500 Watts. 

Several single band antennas can provide 

excellent frequency coverage and 

gain without towers and rotary beams. 

Their directional properties and polarization 

reduce noise up to two to three Sunits 

below verticals and inverted vees. 

These antennas work well even at a 1/4 

wavelength above ground, but perform best 

at 1/2 to 3/4 wavelength above ground. They 

should be mounted horizontally and pulled 

tight. Lengths are 55 to 136 feet horizontally. 

The feedline and stub simply hangs from 

the antenna and can be bent at the bottom 

or pulled away at an angle to make installation 

convenient. Some twisting of the feedline 

or stub is okay. 

½ ë 

½ ë 

½ ë 

½ ½ ½ ½ ë ½ 

¼ ¼ë ¼ ¼ 

Hang & Play! 

When an end-fed antenna is desirable or when a center-fed antenna is not possible 

or convenient, these hang and play TM end-fed Zepp antennas provide excellent no-compromise 

performance. The MFJ end-fed Zepp is a completely assembled single band 

half-wave antenna. It’s designed for direct coax feed and handles a full 1500 Watts 

legal limit with low SWR. Hang and Play! Just follow the easy installation instructions 

-- no cutting, soldering, tuning, or trimming. They radiate in a wide broadside 

pattern. Feedline/stub can be "bent" at the bottom, pulled away at an angle. Superstrong 

fiberglass feed point insulator, glazed ceramic insulator, heavy-duty 7-strand, 14 

gauge hard copper wire, extremely strong solderless crimped-construction. Superstrong 

custom fiberglass SO-239 mount provides stress-relief for the ladder line. 

1/2 Wave End-Fed Zepp Antenna, 5 models: MFJ-6115, $36.95. 15-Meter, 

¼ë ¼ ë 

Line 

stub stub Use Balanced 

BALANCED 

Balanced LINE TO 

TUNER Line to 

Tuner 

Tuner or Tuner/Balun 

4-Element Collinear Array, 3 models 

MFJ-6415, $99.95. 15-Meter, 92 feet horizontal, 10 feet vertical stub. 

MFJ-6417, $104.95. 17-Meter, 108 feet horizontal, 12 feet vertical stub. 

MFJ-6420, $114.95. 20-Meter, 140 feet horizontal, 16 feet vertical stub. 

Each includes 100 feet of 450 Ohm ladder line for connection to your 

tuner. All are Ship Code B. 

MFJ Hang & Play TM End-Fed Zepp Antennas 

½ 

½ ë 

All are 

Ship Code 

B. 

SO-239 COAX for your TO 

coax XCVR to OR 

SWITCH 

transceiver 

23’ hor., 10’ vert. stub; MFJ-6117, $38.95. 17-Meter, 27’ hor., 12’ vert. stub; MFJ-6120, $39.95. 20-Meter, 35’ hor., 16’ vert. stub; 

MFJ-6130, $44.95. 30-Meter, 48’ hor., 22’ vert. stub; MFJ-6140, $49.95. 40-Meter, 68’ hor., 30’ vert. stub. Coax feedline not included. 

Yagi Boom-Mounted Balun 

This 1:1 current-choke 

style 

balun mounts 

on the boom of your HF 

or 6-Meter Yagi to transition 

from unbalanced 

feedline (coax) to the 

balanced driven element. Prevents unwanted 

pattern distortion from feedpoint imbalance, 

radiation from outer surface of coax shield, 

element de-tuning, RFI to consumer electronics 

and noise transfer to the radio’s 

receiver. MFJ uses a toroid style transmission 

line choke that is rated for max legal 

power on SSB/CW and that delivers an 

impressive 35 dB of through-transmission 

(S21) common-mode isolation. Molded 

case, SO-239 connector. 51 MFJ Wall-Mounted Balun 

Mounts on 

the exterior 

wall of your 

shack to keep 

RF out of your operating 

position and away from 

internal house wiring. Also 

prevents electrical noise generated in your 

location from migrating up to the antenna 

feedpoint and raising your receiver’s noise 

floor. Toroid-style transmission-line choke 

is rated for maximum legal power on 

SSB/CW. Delivers an impressive 30+dB of 

through-transmission (S21) common-mode 

isolation on 80-10 Meters. Convenient disconnect 

point for lightning protection. Allstainless 

hardware and rugged components. 

/2Wx2Hx3D in. SO-239 connector. 4Wx21 /8Hx23 MatchMaker 


TM Feed Network 

Raise 

your HF 

dipoles 

high above 

ground for better DX 

without losing that perfect 1:1 match! This 

center block transforms 75 Ohm loads down 

to 50 Ohms. Has a superbly effective 1:1 

current balun for transition from balanced 

element to coaxial line. 1.5kW PEP 

SSB/CW. 4Wx11 /2Hx23 MFJ-2911 

$ 95 39 

Ship Code A 


$ 95 39 

Ship Code A 


$ 95 39 

Ship Code A 


MFJ-29100H, $39.95. Transform 100 

Ohms to 50 Ohms. MFJ-29100H has the 

same features as the MFJ-2975H. 

The following have the same features as 

the above models but handle 300 Watts. 

MFJ-2975, $34.95. For 75 Ohms. 

MFJ-29100, $34.95. For 100 Ohms. 

1.5 kW 

1.5 kW 

¼

MFJ UltraLite TM and PowerLite TM OCFD Wire Antennas 

Delivers Amateur Radio’s most-interesting DX bands -- 40, 20, 10 & 6 Meters -- to your fingertips! 

40/20/10/6M 

300 Watts 


$ 59 95 

Ship Code B 

MFJ-2010 Ultra-Lite TM for 

40,20,10 and 6 Meters, handles 

300 Watts PEP SSB/CW. 

Perfect for low-profile 

portable and QRP operation. 

Weighs less than two pounds 

and pulls high in the air with 

lightweight cord. 

Virtually invisible 66-foot 

jacketed wire element. Delivers 

up to 6-dBi gain on 40 Meters, 

9-dBi on 20 Meters, and a 

whopping 11.5-dBi gain on 10 

and 6 Meters! 

Day or night, there’s always 

DX on one of these bands. If 

you hear it, you’ll work it -even 

on QRP! 

New! MFJ-2013, $79.95. 

Ultra-LiteTM for 60/30 Meters, 

handles 300 Watts PEP SSB. 

Get 1/2 wave dipole ERP on 60- 

Meters plus up to 9-dBi of 

globe-spanning gain on 30M. 

Brings a whole new meaning to 

30-Meter QRP. 86 feet long. 

1.5:1 

Engineered from the ground up, innovative 

new antennas by K1BQT break traditional 

OCFD design barriers to deliver 

wider bandwidth, lower SWR, solid gain, 

and full-frequency agility without a tuner! 

How good are they? W4ILV bought an 

MFJ-2012 and wrote EHAM, “. . . the best 

wire antenna I’ve ever used!” We think 

you’ll agree, and here’s why: 

Highest Efficiency. Full-sized radiator with 

Matchmaker TM feed block that tests over 

98-percent efficient. All your power gets 

radiated! 

Best Match. NEC-modeled element delivers 

the same feed-point impedance on every 

band. Innovative new transformer designs 

2:1 

2:1 

1.5:1 

40/20/10/6M 

1.5 kW 


$ 79 95 

Ship Code B 

MFJ-2012 Power-Lite TM for 

40, 20, 10 and 6 Meters, handles 

maximum legal limit 1500 Watts 

PEP CW/SSB. 

This is the robust high-power 

version of the MFJ-2010 with 

14-guage stranded-copper wire 

and porcelain end insulators. 

Pull-tested to 200 pounds. 

1:1 

7.0 7.1 7. 2 

7.3 

1:1 

14.0 14.1 14.2 14.3 14.35 

1 

75/40 Meters 

1.5 kW 

MFJ-2014 Power-Lite TM for 

75 and 40 Meters, handles maximum 

legal limit 1500 Watts PEP 

CW/SSB. Replaces your old 75- 

Meter dipole and adds 40 Meter 

coverage with up to 9-dBi of 

powerhouse gain! Rugged 122’ 

long. Foreign broadcast and 7- 

MHz has never been better! 

yield exact ratio needed for a great match. 

Super Balun. OCFDs need good baluns to 

block feedline radiation. Built-in bifilarwound 

Guanella current-choke has over 30dB 

of common-mode rejection on all bands. 

Kills pattern irregularities, RFI, noise. 

Real Gain. Delivers a 6-dBi ground-reinforced 

dipole pattern on the fundamental 

and a 9-dBi full-wave cloverleaf on the second 

harmonic. You get an amazing (up to) 

11.5 dBi peak gain on higher bands. 

Height Compensation. Element feedpoints 

are compensated for typical mounting 

height, so you always get the lowest 

possible SWR on all bands! 


$ 99 95 

Ship Code B 

MFJ-2010/2012 VSWR Graphs 

40 Meters 

10 Meters 

20 Meters 

2:1 

1. 5:1 

2:1 

.5:1 

1:1 

28.0 28.2 28.4 28.6 28. 7 

6 Meters 

1: 1 

50.0 50.2 50.4 50.6 

New! MFJ-2016, $129.95. 

Power-Lite TM for 160 and 75 and 

40 Meters, handles maximum 

legal limit 1500 Watts PEP 

CW/SSB. Covers the low end of 

160 Meters plus delivers 9-dBi 

gain in the 75 Meter SSB DX 

window. Heavy-duty components, 

rugged construction. 240’. 

Frequency Compensation. Normally, a 

OCFD cut for 3.85 MHz resonates on 7.7 

MHz. Our unique OCFD element design 

resonates at mid-band on both 75 and 40! 

Built to Last. UV-resistant marine-ABS 

feedblocks, stainless hardware, and Teflon (R) 

SO-239 connector ensure maximum protection 

from the environment. 

Easy-to-Install. Installs in flat-top or 

inverted-V set-up, feedblock has attachment 

points for tower or tree support. Suggested 

installation height is 35-70 feet. 

Low Cost. Outperforms multi-band vertical 

antennas by a wide margin for an unbelievable 

fraction of the cost! 

MFJ Apartment Antennas . . . Mount indoor or outdoor, windows, balconies . . . 


$ 99 95 

Ship Code C 

MFJ-1622 lets you 

operate 40-10 Meters 

on HF, 6/2 Meters on 

VHF with a single 

antenna! Universal 

mount/clamp lets you 

attach it to window 

frames, balconies and 

railings. Works great 

indoors mounted to a table or bookshelf. It’s 

not a 5-element yagi, but you’ll work your 

share of exciting DX! Highly efficient air 

wound “bug catcher” coil, telescoping 5 1 /2’ 

radiator lets you really get out! Radiator collapses 

to 2 1 /2 ft. for easy storage and carrying. 

Includes coax, choke balun, counterpoise wire 

and safety rope. Operating frequency adjusted 

by moving the “wander lead” on the coil 

and adjusting the counterpoise for best SWR. 

Complete antenna system mounts on 

window frames, balconies, and railings. 

Perfect for apartment dwellers. 

Covers 80-6 Meters. Includes universal 

mount/clamp, built-in antenna tuner with 

RF isolator, long 12 foot telescoping 

whip (22.5 inches collapsed), high 

efficiency loading coil for 40/80 

Meters, counterpoise wires, 

and safety rope. 



Like MFJ-1625, but covers 

6 through 30 M. 


$ 199 95 

MFJ-63, $39.95. Highefficiency 

air-wound 80/40 

Meter loading coil with 3/8x24 male and 

Ship Code C 

female connectors. For whips and verticals. 

The 

ultimate 

portable HF 

vertical 

antenna! 

In this kit, you 

get a 2.5” dia., 5inch 

length coil; a 

ten foot telescopic 

whip; six special 

silver plated coil 

40-Meter Pattern, MFJ-2014 

20-M Pattern, MFJ-2010/12 

Outer Ring 9.1 dBi 

75-Meter Pattern, MFJ-2014 

40-Meter Pattern, MFJ-2010/12 

Outer Ring 6.5 dBi 


0 dB 

-5 

-10 

-15 

-20 

0 dB 

-5 

-10 

-15 

-20 

Mention AD5X when you 

order for a 

pleasant 

surprise. 


$ 54 95 

Ship Code B 

clips, and a chassis mount SO-239 connector. 

The rest of the parts needed to build this 

antenna are in Phil Salas, AD5X’ article from 

QST Magazine, 2005. The antenna is a full 

quarter-wave on 20-10 Meters, and also 

works 60, 40 and 30 Meters. Have fun!

MFJ All-Band G5RV Antennas 

Operate all bands through 10 Meters, even 160 Meters, with a single wire antenna! 

The 

famous 

G5RV 

antenna is the most 

popular ham radio 

antenna in the world! 

You hear strong signals 

from G5RVs 

day and night, 24/7. 

And it’s no wonder . . . it’s an efficient, 

all band antenna that’s only 102 feet long - 

- shorter than an 80 Meter dipole. Has 32.5 

foot ladder line matching section ending in 

SO-239 connector for your coax feedline. 

Use as Inverted Vee or Sloper, and it’s even 

more compact and needs just one support. 

With an antenna tuner, you can operate 

all bands 80 Meters through 10 Meters and 

even 160 Meters with an antenna tuner and 

a ground. 

MFJ’s fully assembled G5RV handles 

1500 Watts. Hang and Play 

Folded Dipole Portable Antennas 

MFJ-1779A MFJ-1779B MFJ-1779C 

$ 95 $ 95 $ 95 

69 49 29 

265 ft., 160M 135 ft.,80-40M 35 ft., 20-6M 

Ship Code C Ship Code C Ship Code C 

Ultra high quality center fed dipoles will 

give you trouble-free operation for years. 

Custom injection-molded UV-resistant center 

insulator, built-in connector, hang hole. 

Heavy duty 7-strand, 14-gauge hard copper 

wire. Extremely strong solderless crimped 

construction. Authentic glazed ceramic end 

insulators. Use as horizontal, sloping dipole 

or inverted vee. 1.5 kW. Cut to length for 

your favorite frequency with cutting chart. 

80/40 Meter 

Dipole Antenna 

MFJ-17758 MFJ-17754 

$ 95 $ 95 

89 59 

Ship Code C Ship Code C 

40/20 Meter Dipole Antenna 

MFJ-17754, $59.95. Like MFJ-17758, 

42’ dual band 40/20M dipole. Full-size 20 

Meters, ultra-efficient end-loading on 40M. 

TM MFJ-1778 


-- add coax, 

some rope to hang and you’re on the air! 

MFJ-1778M, $39.95. Half-size, 52 

foot G5RV JUNIOR covers 40-10 Meters 

with tuner. Handles 1500 Watts. 

MFJ All Band Doublet 

MFJ-1777 is a 102 

foot all band doublet 

antenna that 

covers 160 through 

6 Meters with a 

balanced line tuner. MFJ-1777 

$ 95 

Super strong cus- 59 

Ship Code B 

tom fiberglass center 

insulator provides 

stress relief for ladder line (100 ft. 

included). Authentic glazed ceramic end 

insulators. Handles 1500 Watts. 

Single band, lightweight, 

portable 

MFJ Single Band Dipole Antennas Dual Band HF Dipole Antennas 

folded dipoles. 

Low SWR, direct 

coax feed, 200 W. 

Perfect for MFJ Rigs! MFJ-1774B (40M); 




20 Meter Extended Double Zepp 

90 foot long, 20 Meter 

Extended Double 

Zepp. Whopping 

3 dB gain doubles 

your power! 80-10 


Short 85 foot long dual band 80/40 

Meter dipole antenna is full-size 40 M and 

ultra-efficient end-loading on 80M. 1.5kW. 

Super-strong injection-molded center insulator, 

built-in SO-239, hang hole.Solderless, 

crimped construction. 7-strand, #14 

ga. hard copper antenna wire. Connect 

coax feedline directly, no tuner needed. 

80 Meter End-Fed Zepp 

High per- MFJ-1748 

formance, $ 95 79 no Ship Code B 

compromise 

End-fed 

Meters with tuner. 

Zepp. Use when center 

100 feet ladder line, 

glazed ceramic end insulators, 

ladder line stress relieving fiberglass 

center insulator, 7-strand, 

MFJ-1742 feed is not possible or desir- 

$ 95 able. 125 feet long, includes 100 feet ladder 

79 line. Strong fiberglass insulator provides 

Ship Code B 

ladder line stress relief. Glazed ceramic end 

#14 gauge hard copper wire. 1500 Watts. insulator. 1500 Watts. Requires balanced 

Requires balanced line tuner or tuner/balun. line antenna tuner or tuner/balun. 

MFJ Compression 

Aluminum or Fiberglass 

Ceramic Insulators 

Mast Guy Rings 

Designed to fit standard aluminum and 

MFJ-17A01 MFJ-17B01 

$ 05 $ 19 fiberglass tubing from 3/4”, 1” or up to 

2 each 4 each 

1 

MFJ-17C01 

$ 25 6 each 

Model Wire Hole Length Diam. 

17AO1 3/16” 5/16” 2-5/16” 1-3/8” 

17B01 1/4” 5/8” 31/2” 2-1/2” 

17C01 5/16” 3/4” 41/2” 2-7/8” 

1 /4” diameter OD. Strong aircraft grade 

aluminum 1/8” thick and 21 /2” OD. New! 

Fiberglass rings made from 1/8” thick 

FR4. Five 3/8” holes are properly arranged for 3 or 4 

point guy line configurations. Holes are chamfered 

which provides for a smooth surface for guy line connection. 

Buy aluminum-type, MFJ-2830A, B or C, 

$2.49 each or a set-of-three, MFJ-2830X, $6.95. Buy 

fiberglass-type, MFJ-2840A, B or C, $2.99 each or a 

set-of-three, MFJ-2840X, $8.25. 

Model# Price Description 

MFJ-2830A $2.49 For 3/4 inch aluminum guy ring. 

MFJ-2830B $2.49 For 1 inch aluminum guy ring. 

MFJ-2830C $2.49 For 11 /4 inch aluminum guy ring. 

MFJ-2830X $6.95 Set of 3 alum. guy rings, has all 3 above. 

MFJ-2840A $2.99 For 3/4 inch fiberglass guy ring. 

MFJ-2840B $2.99 For 1 inch fiberglass guy ring. 

MFJ-2840C $2.99 For 11 MFJ BASIC DIpole Antenna Kit 

Everything 

you need to 

make one 80- 

10M dipole 

antenna or up 

to three different 

dipoles for 

40 Meters and 

MFJ-2772K up. You get 142 feet of 14- 

$ 95 39 gauge stranded copper antenna 

Ship Code A wire, 9 ceramic “dog-bone” 

insulators, and 6 aluminum wire clamps 

with stainless steel nuts and screws. The 

special wire clamps allow you to adjust 

wire length easily and also hold it in place 

before you make that final cut decision. 

DELUXE Dipole Antenna Kit 


$ 95 59 

MFJ-2774K has everything Ship Code A 

that is in the MFJ-2772K plus 3 multi-purpose 

center insulators, 100 feet of 1/8” 

nylon rope, 2 PL259s, 2 RG-58 reducers, 

SO-239, stainless steel screws/nuts,. Has 6 

ceramic insulators. Make a G5RV, doublet 

or dipole. Multi-purpose center plates have 

pre-punched holes designed to secure and 

relieve stress of feedline weight. Use ladder 

or coax. Pre-punched hole for SO-239. 

Optional feedlines available below. 

MFJ-18H50, $19.95. 50’ 450 Ohm line. 

MFJ-18H100, $34.95. 100’ 450 Ohm line. 

MFJ-5850, $24.95. 50’ RG-58 w/PL259s. 

MFJ-58100, $39.95. 100’RG58 w/PL259s. 

Other Coax, Lengths available, see pg. 10. 

Dipole Center Insulators 

A. MFJ-16D01, $6.95. Super 

strong custom fiberglass stress 

relieving center insulator for 

. . . Continued from left 

B. MFJ-16D02, $8.95. Multi-purpose 

feed line stress relieving center insulator. 

Center plate has pre-punched 

holes designed to secure and relieve 

stress of your antenna’s feedline 

weight. Can be used with 450 Ohm 

/4 inch fiberglass guy ring. 

ladder line or coax feedline. Pre- MFJ-2840X $8.25 Set of 3 fiber guy rings, has all 3 above. 

punched holes for SO-239 connector. 

80- 

10M 

80-10M 

New! 

New! 

$ 39 95 

Each 

70 www.mfjenterprises.com

MFJ Telescopic Fiberglass & Aluminum Masts 

Fiberglass pole extends to 

33 ft . . . weighs 3.3 lbs. 

64 Feet, 11-Section 

Telescopic Aluminum Mast 

This 11-section multi-purpose aluminum 

telescopic pole can be used for 

vertical antennas or as a mast, pictured 

left. Great for portable, temporary use 

and permanent use -- traveling, camping, etc. 

Includes one size of each slitted tube listed above and 

ten hose clamps. MFJ-1965 is 64 feet fully 

extended and 6 feet collapsed without clamps. 

Guying is required if mast is extended 

beyond 30’. Top section is .625” OD. Bottom 

is 2 inches OD x .120 wall. Weighs 24 lbs. 

Base Mount for Fiberglas 

and Aluminum Masts 

MFJ-1900, $69.95. Complete base assembly 

kit with mounting plate, insulators, 

hardware, SO-239, etc. for fiberglass and 

aluminum masts. Fit up to 2.0” OD masts. 

True 1:1 Current 

Balun/Center Insulator 


Balun/ Center Insulator 

forces equal 

antenna currents 

in dipoles 

for superior 

performance. Reduces 

coax feedline radiation 

and field pattern distortion 

-- your signal goes where you want it. 

Reduces TVI, RFI and RF hot spots in your 

shack. Don’t build a dipole without one! 50 

hi-permeability ferrite beads on high quality 

RG-303 Teflon (R) coax and Teflon (R) MFJ-918 

$ 95 24 

Ship Code A 

coax 

connector. Handles full 1.5kW 1.8-30 MHz. 

Stainless steel hardware with direct 14 

gauge stranded copper wire connection to 

antenna. 5x2 inch heavy duty weather protected 

PVC housing. 

MFJ W9INN Balun Box 

Converts unbalanced 

coax line to 

balanced ladder transmission 

line. Giant 2core 

4:1 balun wound 

with Teflon (R) wire. 

31 /4x21 /4x7 in. Heavy 

duty ceramic feedthru 

insulators. 1500 


Watts full legal limit. SO-239. $ 95 

Ground post, mounting holes. 69 

Ship Code B 

MFJ-915 RF Isolator 

Stops RF from traveling on coax lines 


$ 29 95 

Ship Code A 

including small yagis, verticals, loops, full-size dipoles, more. 

Standard models aand H models have 2-inch OD bottom 

sections and a 3/4” top section. 

HD models are extra heavy-duty, they have 2 1 /2” OD bottom 

and 1” OD top sections. Standard model is supplied with 

stainless steel hose clamps. H and HD models come with 

military quality UV protected QuickClamps TM . 

MFJ-1906, $139.95/MFJ-1906H, $189.95 are 33 feet 

extended, 6 feet collapsed, six 6-ft. sections, 13 lbs. 

MFJ-1908, $179.95/MFJ-1908H, $229.95 are 43 feet 

extended, 8 feet collapsed, six 8-ft. sections, 16 lbs. 

MFJ-1908HD, $259.95 is 50’ ext., 8’ collapsed, has 

2 1 /2” OD bottom, 1” OD top, seven 8-foot sections, 24 lbs. 


2 1 /2” OD bottom, 1” OD top, seven 6’ sections, 24 lbs. 


2 1 /2” OD bottom, 1” OD top, seven 4 ft. sections, 14 lbs. 

MFJ-1904H, $139.95. 22’ ext., 5’ collapsed, 9 lbs. 

MFJ-1902H, $119.95 is 10’ extended, 38” collapsed, 

weighs just 5 lbs., true portability -- fits in suitcase! 

MFJ-1900, $69.95. Mast base mount. See left. 

MFJ-14, $59.95. Extra set of 5 Military quality UV 

protected QuickClamps TM . Fits 3/4” to 2” OD masts. 

MFJ-14HD, $69.95. Extra set clamps, 1- 2 1 /2” masts. 

MFJ-915 RF 

Isolator prevents 

unwanted RF from 

traveling on the outside 

of your coax shield into your transceiver. 

This unwanted stray RF can 

cause painful RF “bites” when you 

touch your microphone or volume 

control, cause your display or settings 

to go crazy, lock up your transceiver 

or turn off your power supply. In mobile 

installations, stray RF can be even more 

drastic -- it could cause your car to do funny 

things or even blow your automobile’s 

computer. Clear up these problems, plug 

an MFJ-915 between your antenna and 

transceiver and relax. 5x2 inches heavy 

duty weather protected PVC housing. 

Handles 1.5 kW. Covers 1.8-30 MHz. 

Switchable 1:1 or 4:1 

Current Balun/Unun 

Switchable. 1:1 or 

4:1 current balun/unun. 

Transmission line 

transformer uses low- 


$ 34 95 

Ship Code A 

permeability ferrite cores to give 

amazingly flat response 1.8-30 

MHz. Transforms 200 or 50 ohm balanced 

or unbalanced loads to 50 ohms. Change 

balanced to unbalanced with ground post. 

300 Watts. 2 1 /2Wx4 3 /4Hx1D inches. 

Super-Strong Fiberglass Mast 

-- Select 10, 22, 33 or 43 

Just pull out each section and twist to lock. 

It extends to a whopping 33 feet - - a full quarter 

wave on 40 Meters! It collapses to just 3.8 

feet and weighs a light 3.3 pounds for true portability. 

Bottom section is large 13 MFJ-1910 

$ 95 79 MFJ-1904H MFJ-1904HD MFJ-1906H MFJ-1906HD MFJ-1908H MFJ-1908HD 

Ship Code D 

22 Feet 25 Feet 33 Feet 38 Feet 43 Feet 50 Feet 

$ 95 $ 95 $ 95 $ 95 $ 95 $ 95 

139 159 189 219 229 219 

Ship Code C Ship Code C Ship Code E Ship Code E Ship Code E Ship Code E 

/4-inch diameter. Super-strong 

fiberglass is also super lightweight. 

Great for portable, temporary use and semi-permanent 

use - - traveling, camping, from hotels, hamfests, field 

day, DX-peditions. 

Put up a full size inverted Vee, dipole or vertical antenna 

in minutes and get full size performance. 

Use to construct other types of antennas like loops, 

quads, rotatable dipoles even beams. 

This is a super-strong heavy 

duty telescoping MAST, not a 

flimsy pole! Super-strong 

masts are made of .125 inch 

thick wall fiberglass tubing. 

Support “real” weight 

Left: Stainless Steel 

Hose Clamps (use 

nut/screwdriver). 

Fiberglass is slotted. 

Right: Military quality 

UV protected 

QuickClamps. Guy 

2 levels fully 

extended. 


$ 199 95 

Ship Code D 

Antenna Balun/Unun, Center Insulators & RF Isolators 


Balun/Center Insulators 

MFJ-913/MFJ-919 are true current 

baluns/ antenna center insulators 

that transform 200 ohms to 

50 ohms. Transmission Line 

Transformer construction using 

100 ohm characteristic impedance 

transmission line gives flat 160- 

10 Meter response. Low perme- 

ability ferrite cores, SO-239, stainless 

steel hardware with direct 14 

gauge stranded copper wire connection to 

antenna. Heavy duty weather housing. 

MFJ-913 handles 300 Watts 

and is 41 /2”Hx2” diameter. 

MFJ-919 handles 1500 

Watts. Sturdy cube 

shape housing, 31 /2W 

x31 /2H x21 MFJ-913 

$ 95 29 

Ship Code A 

/2D in. 


Balun/Unun 

True 4:1 current balun/unun 

transforms 200 ohm balanced 

and unbalanced loads to 50 

ohms. True transmission line 

transformer gives an amazingly 

flat response 1.8-30 

MHz. Two low-permeability 

ferrite cores easily handles 300 

watts. Change balanced to unbalanced with 

ground post. 21 /2Wx43 MFJ-919 

$ 95 59 

Ship Code A 





BigEAR TM 8-Band Portable Dipole 

Discover the BigEAR TM Advantage . . . BIG Signal, Best Bang for the BUCK! Backpack 

portable, fast set-up and tune, Continuous Coverage 7.0-55.0 MHz, Very Low SWR, 

Highly Efficient 34’ Element, 1 kW PEP SSB/CW, Long-Lasting Construction . . . 

If 

you’re 

headed for the 

hills or off to the 

shore, MFJ’s 

BigEAR TM portable HF 

antenna sets a new standard 

for toughness, simplicity 

and QSO grabbing! 

Efficiency is the key to launching 

a big signal in remote areas and 

BigEAR TM does it so well you might 

20M to FM Broadcast Multiband Portable 

Telescopic Dipole Antenna 

MFJ-2299 is a rugged continuously 

adjustable stainless-steel dipole that covers 

the FM broadcast band through 20 

Meters. It sets up quickly and makes a 

great temporary antenna for apartments, 

motel balconies, RVs, mountain topping, 

and boating. Great for field day also! 

Best-of-all, its full-size 1/2 Wave element 

delivers the high-efficiency you 

need to work QRP DX or monitor distant 

shortwave broadcasts from virtually any 

location. Frequency coverage is continuous. 

Optimum length may deviate slightly 

depending upon factors such as height 

MFJ “HF Stick” mini-Dipole Mount 

Build your own 80-6 Meter mini-dipole using two HF mobile 

whips! Mounts on mast up to 1 1 /4” OD. Super heavy-duty solid 

aluminum construction. Only MFJ has exclusive, isolated 

dipole elements that let you insert balun or coil up coax 

to isolate feedline. Gives you a true balanced dipole MFJ-347 

$ 95 

that prevents RF on coax shield, eliminates pattern dis- 19 

tortion, reduces noise pickup and RFI radiation from Ship Code A 

coax and provides deep dipole end-nulls for nulling out interference. 

Single-band Rotatable mini-Dipoles 

Use these inexpensive, lightweight, 

isolated mini-dipoles when space is limited 

for temporary or permanent 

installations. Rotate to null 

QRM/noise and to focus your signal. 

Includes two HF sticks of your choice 

and MFJ-347 mini-dipole mount. 

34’ of Radiating Elements! 

The secret lies in MFJ’s incredibly 

strong and weather-resistant stainlesssteel 

telescopic whips -- stretches to a 

whopping 34’ span, twice the length of 

other portables. 

Add a robust 45-degree center block 

and our unique Hi-Q matching system and 

you have a “pair of ears” that digs out the 

weak ones that the other guys miss. 

MFJ-2289 does it all with fewer parts 

to assemble and a much faster tune-up 

procedure. In fact, you’ll be on-the-air 

with rock bottom SWR while your buddies 

are still reading their instruction manuals! 

The MFJ-2289 is truly a “general coverage” 

antenna because you can tune it up 

with exceptionally low SWR on any frequency 

between 7.0 and 55 MHz. 

With 34’ of signal-radiating element 

available, you won’t be handicapped by 

power-robbing losses of big loading coils. 

You get consistent performance and 

maximum RFI protection because our lab- 

7.0-55.0MHz!!! 


$ 179 95 

Ship Code C 

forget you left home! New! 

rated Guanella Balun is built right into the 

feed assembly. It’s proven to be highly 

effective across the full tuning range. 

When you’re out in the field, safety is 

important. BigEAR TM is specially designed 

to minimize risks of portable operation. 

Heavy-duty components keep the MFJ- 

2289 up. Also the 1kW PEP power rating 

assures a wide margin of electrical safety. 

And perhaps the greatest safety feature 

of all is a distinctive V-shaped element that 

keeps element tips high in the air to protect 

yourself and those around you from inadvertent 

contact. Your sight will be safe and 

so will your investment. Sturdy aluminum 

and stainless-steel construction. 

Includes U-bolt for up to 1 3 /4” masts. 

MFJ-1919EX, $139.95. Optional 

Tripod includes telescopic fiberglass mast 

with QuickClamps TM Maximum height to 

18 feet. Collapses to 5 feet. 

MFJ-1918EX, $89.95. Max height to 

10’. Collapses to 3.8’. See more below. 

above ground, 

proximity to 

nearby 

objects, etc. 

BigEAR TM closeup 

Coax not 

included. 


$ 95 129 

Ship code C 

You simply adjust for the lowest SWR. 

MFJ-2299 includes MFJ-347 dipole 

mount and two 17’ MFJ-1979 stainlesssteel 

telescopic whips with 3/8x24 studs, 

collapsible to 27 inches. 

Super quick and easy to put together. 

Just screw the bracket onto your mounting 

pole, screw in the whips and add your 

coax! Save $10! Purchase the complete 

MFJ-2299 kit instead of individual parts. 

Your Choice: 

MFJ-2275 - 75M, 

$ 95 44 

per 

band. 

Coax Choke Balun 

Not Included. 

$ 4995 MFJ-2260 - 60M, $ 4995 MFJ-2240 - 40M 

MFJ-2230 - 30M 



except MFJ-2215 - 15M 

as noted 




Quick “no 

tool” thumb 

screw mount 


Big Stick 8-Band 

Vertical Antenna 

For Top Portable Performance, 

Carry a "Big Stick"! Like 

our Big Ear, this portable monopole 

features MFJ's rugged 17’ 

stainless-steel collapsible whip paired with 

an adjustable high-Q air-wound coil. 

Efficiency matters, so it's not 

surprising this winning combination 

stands head and shoulders above 

shorter backpack antennas. 

Consider these features: 

True Backpack 

Portability: Antenna is over 

18 feet long fully extended, but disassembles 

and collapses to 28” in seconds. 

Fits into most any size packs! 

Light Weight: Just over 2 lbs., 

you'll hardly know your packing it!!! 

Versatile: Includes MFJ-342T pipe 

mount -- quickly and easily mounts to 

a 1/4 or 1/2 inch pipe or mast. SO- 

239 with lock washer feeds coax 

underneath the 3/8-24 connector. 

General Coverage: Tapped loading 

coil covers 7.0-55.0 MHz without gaps. 

Great for Ham Bands and outstanding 

for image-free shortwave broadcast! 

Rugged Construction: All 

aluminum, stainless steel construction 

ensures years of excellent 

performance. One Killowatt rated 

components guarantee electrical safety. 

Counterpoise kit included: 

Ensures low SWR, high 

efficiency, maximum site 

safety. 

BigStickTM is for the Ham 

radio operator on the move 

and on-the-go and hungry 

for the next great QSO anywhere 

or anytime! 

Portable Tripods 

MFJ-1919EX 

$ 139 95 

w/18’ ext. mast 


$ 95 89 

Ship Code D 

Each have 

black steel 

base forms 

with strong 

braced equilateraltriangles 

on a side. 

Non-skid feet 

and strong base and mast locks. 

MFJ-1919, $89.95, holds 100 lbs of 

antenna steady.Extends a whopping 

7.8 feet. Base extends up to 4.8 sq. ft. 

1.4” dia. mast accepts most U-bolts. 

Collapses to 54” by 6” dia. 9 3 /4 lbs. 

MFJ-1919EX, $139.95. Base of 

MFJ-1919 plus telescopic fiberglass 

mast with QuickClamps TM . 18’ 

extended. 5’ Collapsed. Strong 

1/8” wall fiberglass, 3/4” dia. 

top, 1 1 /2” dia. bottom. 15 lbs. 

MFJ-1918, $49.95, holds 

66 lbs. of antenna steady. 

6’extended. 1” dia. 38” 

collapsed, 4”dia.6 3 /4 lbs. 

MFJ-1918EX, $89.95. 

Like MFJ-1918 plus 

9.5’ telescopic fiberglass 

mast with 

QuickClamps TM . 

3.8 ft. collapsed. 

3 /4”top, 1” bottom. 

6.5 lbs. 


$ 99 95 

Ship Code C 

New! 

MFJ-1 918EX 

$ 95 89 w/9.5’ ext. mast 


$ 95 49 

Ship Code C

½ Wave, 6-Band Rotatable Mini-Dipole 

Low profile 14 feet . . .7 ft. turning radius . . . 40, 20, 15, 10, 6, 2 Meters 

. . . 1500 Watts . . . Directivity focuses signal, reduces QRM/noise . . . 


$ 249 95 

WARC Band Version 

Now Available! 

You can hardly see this mini 14 

foot rotatable dipole across the street! 

Its tiny 7-foot turning radius fits 

on the smallest roof -- it’s perfect for 

town houses, apartments and condos. 

The MFJ-1775 is inconspicuous 

and low profile -- not much bigger 

than a TV antenna and can easily be 

turned by a lightweight TV rotator 

(see AR-303/AR-500, page 119). 

It’s no Wimp! Its directivity reduces 

QRM/noise and lets you focus your 

signal in the direction that you want 

-- so you can work some real DX. 

You can operate 6 bands -- 40, 20, 

15, 10, 6 and 2 meters -- and run full 

1500 Watts SSB/CW on all HF bands! 

Features automatic band switching 

Coax Center Insulator 

MFJ-16B01, $19.95. 

Built-in SO-239 connector, 

super strong, UV resistant, custom 

injection molded, hang hole for inverted 

vees, wire tie points, light-weight. 

Center Insulator for 

Dipole Antennas 

MFJ-16G01, $29.95. 

Super strong, UV resistant, 

custom injection 

molded, hang hole for 

multi-band dipole ends. Accepts 1/4 or 3/8 

inch diameter coaxial line. 

End Insulator for Multi-Band 

Dipole Antennas 

MFJ-16H02, $6.95. Set of two. 

Super strong End Insulator for 

multiband doublet antennas. 7 inches, 

(178 mm). Heavily serrated end 

insulators. Aluminum tube inserts 

are in end holes for maximum loads. 

Ladder Line Center Insulator 

MFJ-16D01, $6.95. 

Super strong fiberglass, 

450 Ohm ladder line center 

insulator. Double 

weave ladder line stressrelief. 

Strong wire tie 

points. Hang hole for inverted vees. 

Ship Code D 

and uses highly efficient 

end-loading with its 

entire length always radiating. 

With 6 and 2 

Meters thrown-in, you have 

ham radio’s most versatile rotatable 

dipole! 

Each HF band uses a separate, 

efficient end-loading coil wound on 

fiberglass forms with Teflon TM wire, 

and capacitance hats at each end (no 

lossy traps). 6 and 2 meters are fulllength 

halfwave dipoles. 

Built-to-last -- incredibly strong 

solid rod fiberglass center insulator 

and 6063 T-6 aircraft strength aluminum 

tubing radiator. Assembles in 

an afternoon. Adjusting one band has 

little effect on other bands. 

MFJ-1775W, $249.95. WARC band 

version for 12, 17, 30, 60 Meters only. 

MFJ 20/15/10/6 Meter Rotatable Dipole 

MFJ-1769 is a full-size high-effiency 26’, 

20-15-10-6 Meter full legal limit rotatable 

dipole that is super low-profile -- almost 

invisible from across the street! With a 13foot 

turning radius and tiny 9 lb. weight, it 

fits on small roofs, apartments and condos -easily 

turned by a lightweight TV rotator like Hy-Gain’s (R) AR-303/500. MFJ-1769 

$ 95 

Mount in the attic for antenna restricted neighborhoods. It’s no wimp! 279 

Ship Code D 

Its bidirectional pattern can help reduce QRM and/or noise while maximizing 

your signal in the directions that you want -- so you can work some real 

DX. Handles up to a full 1500 Watts SSB/CW on all HF bands and Six Meters. 

MFJ Glazed Ceramic 

Center/End Insulator 

MFJ-16C01, $0.79 each. 

MFJ-16C06, $4.56. Six Pack. 

Authentic glazed ceramic antenna 

insulator. Extra-strong -- will not 

break with long antennas and will 

not arc over or melt even under full 

legal power. Molded ridges give extralong 

path to prevent high-voltage breakdown. 

Smooth wire holes prevent wire 

damage. Use as center or end insulator for 

dipoles, doublets, G5RVs, guy wires, vees. 

A. 450 Ohm ladder line. Two 18 gauge solid 

copper covered steel. Insulated and spaced by 

heavy duty black polyethylene. Uniform spacing 

between conductors insures proper balance, ideal 

for balanced line and dipole antenna projects. 

MFJ-18H050, 50 Ft., $19.95. 



A. B. 

B. 300 Ohm TV twin-lead. Two 20 gauge 

stranded copper wire. Insulated and spaced by 

black polyethylene. Best for dipole, j-pole and for 

most other low power uses. 

MFJ-18T050, 50 Ft., $22.95. 



MFJ 80/40/20 Meter 

Rotatable Dipole 

A full legal limit efficient 80, 40, and 20-meter 

antenna that is shorter than a 20-meter dipole… 


$ 369 95 

Now you can 

operate the low bands on 80, 40, and 20 Meters with a 

true rotatable dipole that’ll blend in with the sky! 

Take advantage of the excellent propagation of the 

low bands during the low sunspot cycle. 

This rotatable dipole lets you focus your signal in the 

direction you want so you can work some real DX! 

Small, low profile, inconspicuous. 

The entire antenna length is used on all three bands. 

The MFJ-1785 is constructed of 6063 T-6 aircraft 

strength aluminum tubing with a solid center fiberglass 

insulator and handles 1500 Watts SSB/CW. 

The 80 and 40 meter end-loading coils are wound on 

fiberglass forms with TeflonTM Ship Code E 

wire, and resonated with 

capacitance hats to ensure an extremely low-loss structure. 

Balun included! 33 feet wide. 

Requires a medium-duty rotator such as Hy-gain’s 

AR-40 -- See page 119 for more details. 

MFJ 6 Meter Add-On Dipole Kit 

Adds 6-Meter capability to 

most yagis or rotatable dipoles. 

Can be mounted to driven element 

of most rotatable dipoles or singleband/multiband 

beams without affecting 

antenna’s performance. Handles 1.5 

kW. Adds less than 1 lb. weight and essentially no 

increase in wind-loading to the existing antenna. HF 

beam must be direct-fed with coax, or a 1:1 balun that 

handles 1.5 kW. Power may be limited by the 

power handling of the installed balun on HF beam. 

Build your own wire antenna with these special MFJ parts . . . 


$ 29 95 

Ship Code A 

Ladder Line Feedpoint End Insulator 

MFJ-16E01, $9.95. Super strong 

fiberglass, 450 Ohm ladder line end 

insulator. Double weave ladder line 

stress relief. Built-in SO-239. 

Ladder Line Feedpoint 

Middle Insulator 

MFJ-16F01, $8.95. 

Super-strong fiberglass ladder 

line middle insulator. High-strength 

coax connection at midpoint. SO- 

239 connector, quadruple weavethrough 

ladder line stress relief. 

Ladder Line, Twin Lead, Copper Wire, Rope 

C. Copper Antenna wire. Flexible, 7-strand, 14 

gauge, hard solid-copper wire. Strong/long-lasting. 

MFJ-18G100, 100 Ft., $24.95. 

MFJ-18G250, 250 Ft., $59.95. 

C. 

D. 

D. 3/32 Dacron Wire Rope. Fine copper wire is 

webbed into Dacron rope. Makes it extremely flexible 

but super strong/light. Ideal for wire/dipoles. 

MFJ-18D120, 120 Ft., $49.95. 

E. Wire Antenna Installation Rope. Select MFJ 

Nylon or Polyester dacron rope for your wire 

antenna installations. Black, UV resistant. 

MFJ-19A100, $9.95. 100 feet, 3/32” nylon rope. 

MFJ-19A250, $18.95. 250 feet, 3/32” nylon rope. 

MFJ-19C100, $12.95. 100 ft, 3 /16” polyester rope. 

MFJ-19C250, $29.95. 250 ft., 3 E. (nylon) E. (polyester) 

/16” polyester rope. 


MFJ Antennas for Restricted Areas 


tiny 36 inch 

diameter 

loop antenna 

lets you 

operate 10 

through 30 

MHz continuously-including 

the 

WARC bands! 

Ideal for limited space -- apartments, 

small lots, motor homes, attics, or mobile 

homes. Enjoy both DX and local contacts 

mounted vertically. Get both low angle 

radiation for excellent DX and high angle 

radiation for local, close-in contacts. 

Handles 150 watts. 

Super easy-to-use! Only MFJ’s super 

remote control has Auto Band Selection TM . 

It auto tunes to desired band, then beeps to 

let you know. No control cable is needed. 

Fast/slow tune buttons and built-in two 

range Cross-Needle SWR/Wattmeter lets 

you quickly tune to your exact frequency. 

MFJ Vertical 

for Antenna 

Restricted Areas 

40, 20, 15, 10 Meters, 

Automatic BandSwitching 

WARC 

Band 

Version 

Now 

Available! 


$ 419 95 

Ship Code F 


$ 95 169 

Ship Code E 

Perfect for permanent 

or portable 

operation in antenna 

restricted areas. 

Hide behind trees, 

fences, buildings, 

in bushes -- only 7 

to 10 feet tall 

(adjustable). 

Low angle of 

radiation for 

DXing, omnidirectional,handles 

1500 watts 

PEP. 

Highly efficient 

end-loading. 

Entire length radiates. 

Low SWR. 

Ground mounts 

with suitable 

ground such as 


Ground-Coupled 

Antenna Base, 

radials or ground rods. Roof mount 

with radials. 

MFJ-1795W, $169.95. WARC band 

version for 12, 17, 30, 60 Meters only. 

MFJ-1901 P95, $239.00. MFJ-1901 

with MFJ-1795 Combination. Saves $30.90! 

MFJ-1901HG18, $194.90. MFJ-1901 

with AV-18VS. Saves $15! See pg. 125. 

MFJ Super High-Q Loop TM Antennas 

All welded construction, no mechanical 

joints, welded butterfly capacitor with no 

rotating contacts, large 1.050 inch diameter 

round radiator -- not a lossy thin flat-strip 

-- gives you highest possible efficiency. 

Each plate in MFJ’s tuning capacitor is 

welded for low loss and polished to prevent 

high voltage arcing. Welded to the 

radiator, has nylon bearing, anti-backlash 

mechanism, limit switches, continuous nostep 

DC motor -- smooth precision tuning. 

Heavy duty thick ABS plastic housing 

has ultraviolet inhibitor protection. 

MFJ-1788, $469.95. Same as MFJ- 

1786 but covers 40 - 15 Meters continuous. 

Includes super remote control. 

MFJ-1782, $379.95. Like 

MFJ-1786 but has fast, slow 

tune button control box. 

MFJ-1780, $299.95. Box 

Fan Portable Loop is about 

the size (2x2’) of a box fan, 

complete with handle. Covers 

14-30 MHz. Remote Control 

box has fast/slow tunes. 

Portable Antenna Base 


$ 109 95 

Ship Code E 

Shown with 

multi-band 

Hy-Gain 

antenna and 

mount, 

(not incl.). 

The MFJ Ground- 

Coupled Portable 

Antenna Base TM gives 

you a stable way to 

mount your vertical 

antenna and provides 

an effective ground 

by just plopping 

down the base and 

standing on it to push 

the legs firmly into 

the ground. It’ll sup- 

port many multi-band verticals. 

It’s perfect for traveling or for semi-permanent 

summer/winter homes. You can easily 

set it up and take down your vertical 

antenna for stealth operation if you live in an 

antenna-restricted area. 

The MFJ-1901 Ground-Coupled Portable 

Antenna Base TM is a 2x2 foot stainless steel 

square with reinforcing bends that greatly 

strengthens it. There is a folded and tapered 

six-inch stainless steel leg on each corner. 

Two antenna mounts let you use a variety 

of vertical antennas. 

Two handles make carrying and removing 

the base fast and easy. You can also attach 

radials for improved performance. 

Stainless steel construction means you’ll 

get trouble-free service for years. 

The base is anchored into the ground by 

stepping on each corner and forcing each leg 

into the ground. Each stainless steel leg is 

designed to keep the base from tilting. 

The base can support a lightweight multiband 

vertical antenna -- like the all-band Hy- 

Gain AV-18VS and the bandswitching MFJ- 

1795 -- and provide a semi-permanent installation. 

Hide the base by covering it with 

grass, leaves and dirt. 

Built-in antenna mount with SO-239 coax 

connector and two U-bolts lets you mount 

most standard and homebrew vertical antennas. 

Standard 3/8-inch x 24 mobile antenna 

mount built-in for MFJ Mobile Whips, bug 

catchers, Hustlers and screwdriver antennas. 


31’ Feather-Lite TM 

80-6M Vertical Antenna 

No trees, no problem! 31’self-supporting 

vertical sets up in minutes, 

collapses to only 

3.8’ -- perfect for RVs, 

vacations, field day, or 

as grab-and-go kit. 

More than a simple 

"flagpole", this complete 

antenna system 

includes adjustable 

base-loading coil, Guanella balun, 

and counterpoise. 

Why it stands out above others: 

Rugged Vertical Element: stout 

13 /4"base supports twist-lock fiberglass 

sections--telescopeS to 31’in seconds. 

Despite its length, it’s so light one 

person can raise/lower it easily, even 

in wind. Special lightweight wire reduces 

weight in top sections for 

improved rigidity and reduced sway. 

Base Loading Network: Airwound 

high-efficiency loading coil is 

continuously tapped to provide full 

coverage 3.5-7 MHz. On 17M, the 

inductor configures as a 5/8-wave for 

added gain. On 20M, adding inductance 

improves the load to your tuner. 

RF-isolated base tuning unit can be 

attached to any supporting structure. 

Portable Counterpoise: No guess 

work or ground rods needed, just 

connect 4 insulated 12’ radial wires 

to tuning unit and lay on ground. 

Guanella Balun: Lab rated with up 

to 30-dB common-mode suppression, 

balun prevents feedline, radio & you 

from becoming part of the antenna! 

Easy Wire Handling: Detachable 

wire spooler makes handling/storing 

wire easy during setup/takedown. 

Attaches to antenna body for storage. 

Add Wire: Use conductive eyebolt 

at antenna top to install wires for 

an inverted "L" or a "T" to enhance 

low frequency coverage. 

Corrosion Resistant: All hardware 

is aluminum, stainless steel, or corrosion 

protected to ensure long life. 

Low SWR: No tuner is needed for 

80/75/60/40/17 Meters, 

radiator length is fixed 

at 31’. Operation on 

30/20/15/12/10/6M 

requires an ATU. 

Power Rating: MFJ- 

2982 components are 

safety-rated for 600 

Watts PEP on SSB/CW. 


(Left). Like MFJ- 

2982, but covers 40 

Meters through 6 Meters. 

Optional Tripod 

Mounting: 


portable heavy-duty 

tripod specially set up 

for supporting/mounting 

your Feather-LiteTM MFJ-2980 

$ 95 99 40-6 Meters 

Ship Code C 


$ 95 149 

80-6 Meters 

vertical antenna and base 

loading unit. Extrawide 

base gives full, 

steady support.

MFJ 160-6 Meter Antenna 

Self-supporting 43 foot vertical -- no guy wires required . . . 1500 Watts . . . exceptional performance . 

. . low-profile . . . includes base mount and legal limit balun . . . assembles in an hour . . . 


$ 95 359 

Ship Code E 

Operate all bands 160-6 Meters at full 1500 

Watt with this self-supporting, 43 feet high performance 

vertical! It assembles in less than an 

hour and its low-profile blends in with the sky and 

trees -- you can barely see it from across the street. 

Exceptional Performance 

The entire length radiates to provide exceptional 

low angle DX performance on 160-20 meters and 

very good performance on 17 through 6 Meters. 

You can shorten it by telescoping it down for more 

effective low angle radiation on higher bands if 

desired. 

With an automatic antenna tuner there’s no fuss -just 

talk! 

A wide-range automatic or manual antenna tuner 

at your rig easily matches this antenna for all bands 

160-6 Meters. No physical tuning adjustments on 

antenna -- simply put it up! 

Optimized balun design allows direct coax feed 

with negligible coax loss (typically less than 1 /2 dB 

60-6 Meters and less than 1 dB 160-80 M with 

good quality, low-loss coax). 

Fully self-supporting, Extremely low wind loading, 

Very low visibility . . . 

With just 2 square feet wind load, the fully selfsupporting 

MFJ-2990 -- no guy wires needed -- has 

the lowest wind-loading and lowest visibility of any 

vertical antenna! Its 2-inch O.D. and .120 inch 

thick walled tubing bottom section makes it incredibly 

strong -- it’ll stay up! 

1.5kW 80/160M high-efficiency Matching Network 

MFJ-2910 improves efficiency on 160 and 

80 Meters for the popular new 43-foot all 

band vertical antennas by eliminating SWRrelated 

coax and unun mismatch losses. When fed 

with a 1:4 unun, the 43’ antenna has a reasonable 

compromise SWR on 60-10 Meters. However, at 

New! 


$ 299 95 

Ship Code B 

160/80 Meters it is virtually impossible to match this antenna 

because of the low radiation resistance. If you are using low 

loss coax, you will lose much power in the coax and unun due 

to bad antenna mismatches. Installed at the base of the 43’ 

vertical, MFJ-2910 will significantly eliminate these losses and 

put 160 and 80 Meters back within the tuning range of the 

tuner inside the shack. Includes high-voltage insulated base 

tube, remote power injector with switch for 160, 80 Meters and 

off positions. Handles 1.5kW. Matching box mounted in a 

rugged, weather-resistant PVC housing, 3Wx16Hx3D inches. 

New! 600 Watts 80/160 Meter Matching Network 

MFJ-2908, $249.95. Has all features of MFJ-2910, but handles 

600 Watts on 80 and 300 Watts on 160M. 3Wx11Hx3D”. 

160 Meter Tuner Range Extender for 43’ Verticals 


$ 79 95 

Ship Code B 

Forty-three foot vertical antennas have become very 

popular in recent years. However, on 160 Meters, these 

antennas have a very high reactance and high voltage at 

the antenna feedpoint. Tuning with a tuner results in maximum efficiency 

80-10 Meters, but conditions at 160M present a major challenge 

for most tuners. To get around this problem, add the range extender to 

the base of the antenna to increase 160M matching capabilities. Reduces 

reactance and puts the antenna in range of the automatic or 

manual tuner. Potentially damaging high-voltage currents are reduced -- preventing 

damage to the tuner. 1.5 kW. Weather-resistant PVC, ceramic feedthru connectors for 

input/output. Shorting jumper connection when 160 Meters is not in use. 3 1 /2Wx3 1 /2 

Hx11D”. Use with MFJ-998RT/MFJ-994BRT or other automatic/manual tuners. 

MFJ-2902, $59.95. Like MFJ-2904, 300 Watts, 5-way binding posts for in/out. 

3 1 /2W x3 1 /2Hx7D”. Use with MFJ-926B/927/993BRT auto tuners or manual tuners. 

Weighs just 20 pounds -- you can easily put it up 

by yourself because its corrosion resistant 6063 aircraft 

aluminum tubing and stainless steel construction 

make it light and super-strong. 

Assembles in an hour 

You can easily assemble it in an hour! Ground 

mounting lets you completely hide its antenna base 

in shrubbery. Includes MFJ-1900 high-strength 

antenna mount. 

Requires ground system -- at least one radial. 

More extensive ground system will give much better 

performance. Optional all-band ground radial kit, 

MFJ-1932, $34.95, see bottom right. 

Great for Stealth Operation in 

antenna restricted areas 

This very low-profile antenna 

is perfect for stealth operation 

in antenna restricted areas. 

Hide it behind trees, fences, 

buildings, bushes. Use it as a 

flagpole. 

Telescope it down during the 

day. Put it up at night and take 

it down in the morning before 

the neighbors even notice! 

Quick and easy installation 

makes it great for portable and 

temporary operations: field 

day, camping, DXpeditions, 

vacations, hiking trips, etc. 


includes this base 

mount and legal 

limit balun!!! 

Universal Vertical Tilt Base 


80/160 Meter 

Matching 

Network New! 

A unique 

design allows 

this tilt base to 

fit most vertical antennas 

with or without a base 

bracket. Pre-punched hole 

makes it easy to mount many dif- 

ferent type of verticals. Fits Hygain’s 

AV18VS/14VS/18AVQ/640/620/ AV-6160, and 

MFJ-1796/1798/2990 and others with tube bases 

or mast pipes up to 2 1 /4” OD. Mount one side of 

the tilt base to the mast and the other to the antenna 

base. No climbing a ladder -- raise your 

antenna up and down easily before severe weather 

and by yourself -- just walk it up or walk it 

down. Makes any antenna system easy to work 

on by yourself! Ground radial holes also provided. 

1/8” thick aluminum. Includes (4) 2 1 /4” Ubolts, 

mast saddles and stainless steel nuts/bolts. 

All-band Ground Radials 

All-band ground 

radial system for 

the MFJ-2990 


$ 69 95 

Ship Code B 


$ 34 95 

Ship Code A 

and other verticals requiring 

a radial system. Convenient 

and effective, it provides 

the necessary return path for ground currents to 

reduce ground losses. Consists of 2 sets of 4 radial 

wire assemblies giving a total of eight 14’ radial 

wires. Each 1/4” ring lug for attaching to the 

antenna ground point. Each end of the radial 

wires has a solder lug for staking the wire end. 

www.mfjenterprises.com 75

10 Bands -- One MFJ Antenna! 

Full size performance . . . No ground system or radials 

Operate 10 bands: 75/80, 40, 30, 20, 17, 15, 12, 10, 6 and 2 Meters with one antenna 

Separate full size radiators . . . End loading . . . Elevated top feed . . . Low Radiation 

Angle . . . Very wide bandwidth . . . Highest performance no ground vertical ever . . . 

Operate 10 bands -- 75/80, 40, 30, 20, 17, 

15, 12, 10, 6 and 2 Meters with this MFJ-1798 

vertical antenna and get full size performance 

with no ground or radials! 

Full size performance gives high efficiency for 

more power radiated. Results? Stronger signals 

and more Q-5 QSOs. 

Full size performance also gives you exceptionally 

wide bandwidths so you can use more of your 

hard earned frequencies. 

Full size performance is achieved using separate 

full size radiators for 2-20 Meters and highly efficient 

end loading for 30, 40, 75/80 Meters. 

Handles full 1500 watts PEP 

Get very low radiation angle for exciting DX, 

automatic bandswitching, omni-directional coverage, 

low SWR. Handles 1500 Watts PEP SSB. 

MFJ’s unique Elevated Top Feed TM elevates the 

feedpoint all the way to the top of the antenna. It 

puts the maximum radiation point high up in the 

clear where it does the most good -- your signal 

gets out even if you’re ground mounted. It’s easy to 

tune because adjusting one band has minimum 

effect on the resonant frequencies of other bands. 

Self-supporting and just 20 feet tall, the MFJ- 

1798 mounts easily from ground level to tower top 

-- small lots, backyards, apartments, condos, roofs, 

tower mounts. 

Separate Full Size Radiators 

Separate full size quarter wave radiators are 

used on 20, 17, 15, 12, 10 and 2 Meters. On 6 M, 

the 17M radiator becomes a 3/4 wave radiator. 

The active radiator works as a stub to decouple 

everything beyond it. In phase antenna current 

1/2-wave, 6-Band 

No-radials Vertical 

12 feet tall, Mounts 

Anywhere, 40 to 6 Meters 

Only 12 feet high with a 

tiny 24 inch footprint! 

Mount anywhere -- ground 

level to tower top -- apart- 

MFJ-1796 ments and small lots. 

$ 95 Perfect for vaca- 

229 

Ship Code F tions, field day, 

DXpeditions, camping. 

Efficient end-loading, no 

lossy traps. Entire length 

always radiating. Full size 

halfwave on 2/6 Meters. 

High power air-wound 

choke balun eliminates feedline 

radiation. Adjusting one 

band has minimum effect on 

others. 40-20-15-10-6-2 M. 

Automatic bandswitching, 

low radiation angle, 

omni-directional, handles 

1500 watts PEP. Goes 

together in an afternoon. 

MFJ-1796W, $229.95. 

WARC band version for 12, 

17, 30, 60 Meters. 


$ 95 349 

Ship Code F 

Verticals for 

80/40/20 Meters 

80/40 Meter Vertical 


$ 95 189 

Ship Code F 

MFJ-1792 is a high-performance 

80/40 Meter vertical. 

Full size quarter wave 

radiator for 40 Meters -that’s 

33 feet of radiating 

power. 

End-loading, unique 

built-in L-network for lowest 

SWR, low-loss fiberglass 

form, high strength 

6061-T6 aluminum tubing, 

handles 1500 watts PEP. 

Requires guying and 

radials, counterpoise, or 

ground screen. 

80/40/20 Meter Vertical 

MFJ-1793, $209.95, 

like MFJ-1792 but has full 

size 20 Meter 1 /4 wave radiator 

also. 


flows in all parallel radiators. 

This forms a very large equivalent radiator 

and gives you incredible bandwidths. 

Radiator stubs provide automatic 

bandswitching -- absolutely no loss due to loading 

coils or traps. 

End Loading 

On 30, 40, 75/80 Meters, end loading -- the 

most efficient form of loading -- gives you highly 

efficient performance, excellent bandwidth, low 

angle radiation and automatic bandswitching. 

MFJ’s unique Frequency Adaptive L- 

Network TM provides automatic impedance matching 

for lowest SWR on these low bands. 

Tuning to your favorite part of these bands is 

simple and is done at the bottom of the antenna. 

No Ground or Radials Needed 

You don’t need a ground or radials because 

an effective counterpoise that’s 12 feet across 

gives you excellent ground isolation. 

You can mount it from ground level to roof 

top and get awesome performance. 

The feedline is decoupled and isolated from 

the antenna with MFJ’s exclusive AirCore TM high 

power current balun. Wound with Teflon R coax 

and can’t saturate, no matter how high the power. 

Built to Last 

Incredibly strong solid fiberglass rod and 

large diameter 6063 T-6 aircraft strength aluminum 

tubing is in the main structure. 

Efficient high-Q coils are wound on tough 

low loss fiberglass forms using highly weather 

resistant Teflon R covered wire. 

11-foot 10-Meter 


10 METERS IS 

WIDE OPEN! 

This 11-foot 

vertical lets you 

work all the DX 

you can handle! 

Features lightweight 

11-foot 

radiator and two 6foot 

radials both 

made of aluminum. 

Weighs less than 3 

lbs., easy to put 

up/take down for 

DXpeditions or 

stealth. 

MFJ-1790 has a 

super low angle of 

radiation to focus 

New! 


$ 95 69 

Ship Code C 

your signal where you want it -- reduces 

QRM/Noise and gives great DX! 

Included mast bracket can be turned horizontal 

or vertical -- lets you attach it to an 

existing mast or pole with ease! Mast size 

1.5-2.0” with included u-bolts. 

MFJ-1790 covers entire 10-meter band 

(28.0-29.7 MHz), 300 Watts PEP SSB. 

Techs! Join in on the world of HF DXing!!!

MFJ Antenna Window Feedthrough Panels 

Weather-proof window feedthrough panels bring HF/VHF/UHF antennas, balanced lines, 

random wire antennas, ground, DC/AC power and Rotator/Antenna Switch Cables into your 

hamshack without drilling through walls! 

Inside View Outside View 

MFJ-4603,$89.95 






MFJ Weather-Proof Antenna Feedthrough Panels mounts 

in your window sill. Lets you bring all your antenna connections 

into your hamshack without drilling holes through walls. 

Simply place in window sill and close window. One cut customizes 

it for any window up to 48 inches. Use horizontally or 

MFJ AdaptiveCable TM Wall Plates 

6.95Wx12.1H inches 

MFJ’s exclusive 

weather-sealed 

AdaptiveCableTM Wall Plates let you bring nearly any 

cable -- rotator, antenna switch, coax, etc. -- through 

walls without removing connectors. 

Pass cable connectors up to 11 /4x15 Ship Code A 

/8 inches. Sliding plate 

adjusts hole size to weather-seal virtually any size cable. Rubber 

grommet seals out rain, snow, other adverse weather. 

Complete kit includes 18 gauge stainless steel plates for each 

side of wall, sliding plates, rubber grommets, weather stripping and 

mounting screws. Models for one, two and four cables. 


6.95Wx6H inches 

3.25Wx 

6H in. 

MFJ-4614 (Four Holes) 

$ 95 34 

Ship Code A 

MFJ-4612 (Two Holes) 

$ 95 24 

Ship Code A 

MFJ-4611 (Single Hole) 

$ 95 14 

vertically. High-quality pressure-treated ¾ inch thick wood has 

excellent insulating properties. Painted with a heavy coat of longlasting 

white outdoor enamel paint. Edges sealed by weatherstripping. 

Seals and insulates against all weather conditions. 

Gives years of trouble-free service. All are 3 /4Dx31 /2Hx48W inches, 

except for MFJ-4605, which is 3 /4Dx7Hx48W inches. 

Inside/outside stainless steel plates bond all coax shields 

together to ground connection. Stainless steel ground post brings 

outside ground connection inside. 

Six models to choose from: 

MFJ-4603, $89.95. MFJ Universal Window Feedthru Panel. 

Four 50 Ohm Teflon (R) SO-239 coax connectors lets you feed 

HF/VHF/UHF antennas at full legal power limit. 

A 50 Ohm Teflon (R) coax N-connector lets you use any antenna 

up to 11 GHz, including 450 MHz, UHF, satellite, moon bounce 

and 2.4/5.8 GHz Wi-Fi antennas. 

A 75 Ohm, 1 GHz F-connector makes it easy to bring in television, 

Satellite, HD, cable TV and FM radio signals. 

A pair of high-voltage ceramic feedthru insulators lets you bring 

in 450/300 Ohm balanced lines directly to your antenna tuner. 

Has random/longwire antenna ceramic feedthru insulator. 

5-way binding posts lets you supply 50 Volts/15 Amps DC/AC 

power to your outside antenna tuners/relays/switches. 

Stainless ground post brings in ground connection, bonds inside/ 

outside stainless steel panels together and drains away static charges. 

MFJ's exclusive Adaptive Cable FeedthruTM lets you bring in rotator/antenna switch cable, 

etc. without re-moving connectors (up to 

11 /4X15 /8 in). Adapts to virtually any cable 

size. Seals out rain, snow, adverse weather. 

MFJ-4602, $69.95. Our most popular model. Three SO-239 

Teflon (R) coax connectors let you feed HF/VHF/UHF antennas. High 

voltage ceramic feed-thru insulators bring 450/300 Ohm balanced 

lines into your hamshack. Ceramic feed-thru insulator for longwire 

or random wire, Stainless steel ground post brings ground in. 

MFJ-4601, $59.95. For coax fed antennas. Has six high quality 

Teflon (R) SO-239 connectors for HF/VHF/UHF coax fed antennas 

and a stainless steel ground post. Handles full 1500 Watt legal limit. 

MFJ-4600, $79.95. Balanced Line/Coax Feedthru Panel. Four 

sets of ceramic feedthrough insulators and two SO-239 connectors. 

MFJ-4604, $99.95. MFJ Weather-Sealed CableThruTM Window 

Panel. Five Adaptive Cable FeedthrusTM , two for connectors up to 

11 /4x15 /8 inches and three for UHF/N size coax connectors. Adapts 

to virtually all cables used in ham radio. Seals out weather. 

MFJ-4605, $159.95. All-Purpose FeedThru/CableThruTM Window 

Panel. Combines MFJ-4603 and MFJ-4604! Gives you every connection 

you’ll ever need and more -- without drilling holes in wall! 

Bring cables thru eave of your house 


shown with vent (not 

included) it replaces. 

Six Holes 

$ 95 26 

Ship Code A 


shown with vent (not 

included) it replaces. 

Three Holes 

$ 95 14 

Replace your standard house eave/sofitt air vents with these 

MFJ AdaptiveCableTM Air Vent Plates. 

Bring in coax, rotator, antenna switch, power cables, etc. of 

nearly any size up to 11 /4x15 Ship Code A 


Sliding plates and rubber grommets adjust for virtually any 

cable size to seal out adverse weather, insects and varmints. Use 

existing vent hole, mounting screws and screw holes. 

MFJ-4616, $26.95. Full-size. For six cables. 

MFJ-4613, $14.95. Half-size. For three cables. 


MFJ QuickStudy TM Ham Radio License Guide 

New Question Pools! 


$19.95. Volume 1 

is a practical level 

antenna from the 

ground up book 

by L.B. Cebik, 

W4RNL. Concise, 

clear chapters. 


Ladder Crystal Filters. 

Generous references, 

John Pivnichny, N2DCH. 


$19.95. The 

late Doug 

DeMaw, 

W1FB, gives 

a wealth of 

info on circuits,including 

transmitter 

and receiver 

fundamentals, 

mixers, more. 


$19.95. Volume 2 

of L.B. Cebik’s 

Antennas from the 

Ground Up picks 

up where volume 1 

left off. All new 

antenna projects! 


“73 Verticals, Beams, 

Triangle Antennas”. By 

Ed Noll, W3FQJ. 

MFJ Publishing guarantees that you’ll pass your written exam 

on your first try . . . if you don’t pass we’ll refund your money 

in full* . . . you can’t lose! *Send copy of receipt, proof of failure to MFJ within 30 days of failing and we 

will refund the purchase price of your MFJ QuickStudy TM . Limit 1 per license class. 

MFJ-3211-Technician MFJ-3213-General MFJ-3215-Extra 

Use 


QuickStudyTM License 

Guide and 

MFJ guarantees 

that 

you’ll pass 

the written 

exam on your 

very first try 

or you get 

your money 

back*. See above. 

What is MFJ’s 

QuickStudyTM MFJ-3211 



$ 95 12 

each 

Technician, 

General, or 

Extra Class 

Ship Code A 

concept? The 

objective is to pass the exam 


$19.95. 

Legendary 

textbook from 

the late Doug 

DeMaw, 

W1FB, 

emphasizes 

the practical 

aspect of ferromagnetic 

core material. 


Easy-Up Antennas 

by Ed Noll, 

W3FQJ. For hams 

and SWL. How to 

build and how to 

put up. Fully tested 

designs. 


Everything you need to 

know about mobile! By 

Dave Ingram, K4TWJ. 

and get your license with a minimum amount of study time so you 

can start enjoying the hobby right away. 

Each MFJ license guide has all of the exact questions given on 

the written exam. Each question on the exam has a multiple 

choice answer. But why take the extra time to study the wrong 

answers? It’ll just add to the confusion and doesn’t help you pass 

the exam. MFJ gives you only the correct answers. When you 

take the exam the answer jumps out at you -- no confusion, nothing 

to clutter the mind. It’s an instant correct answer because you 

only studied the right answer. 

Study the material thoroughly a few times, pass the test and 

enjoy the friendship of ham radio -- it couldn’t be simpler. 

MFJ QuickStudy TM License Guides are available for all classes 

Technician, General and Extra Classes. These books only cover the 

written part of the test, not the five word-per-minute code exam. 

MFJ-3211, Technician, MFJ-3213 General Class, MFJ-3215 

Extra Class, $12.95 each. 


$19.95. By 

avid CW enthusiast 

David 

Finley, N1IRZ. 

First book to 

detail the Koch 

method and 

training techniques 

for 

fastest code 

proficiency. 


320 pages, 37 short 

concise chapters. 

Underlying theory, 

powerful antennamaking 

techniques, 

special antenna 

projects and more! 


30 different electronic kit 

projects, schematics, part 

placement. ham toys, etc. 


MORE GREAT MFJ SELECTIONS 

MFJ-3302, $14.95. 73 Dipole & 

Long Wire Antennas. By Ed 

Noll, W3FQJ. Classic antenna 

projects for a weekend! 

MFJ-3502, $12.95. Solid State 

QRP Projects. By Ed Noll,W3FQJ. 

MFJ-36, $12.95. Shortwave 

Listener’s Guide for Apt./Condo 

dwellers. Receivers, antennas, 

other equipment. 

MFJ-3301, $14.95. Troubleshooting 

Antennas and Feedlines. Search it 

out! By Ralph Tyrell, W1TF. 

MFJ-3504, $16.95. FET 

Principles, Experiments and 

Projects. By Ed Noll, W3FQJ. 

MFJ-3510, $19.95. QRP Projects 

from Down Under. Paddyboard 

circuit construction, air wound coils. 

MFJ-37, $12.95. Ham Radio 

Communications Circuit Files. By 

Ed Noll, W3FQJ. Many fun items! 

MFJ-3036, $14.95. PROH: Packet 

Radio Operators Handbook. By 

Buck Rogers, K4ABT. 

MFJ-35, $9.95. Wonderful 

World of Ham Radio! An excellent 

introduction to ham radio for kids, 

classrooms. Great start! 

MFJ-32, $12.95. Packet Radio is 

Made Easy. By Buck Rogers, K4ABT. 

Packet radio for beginners! 

MFJ-31, $9.95. Oscar Satellite 

Review. By Dave Ingram, 

K4TWJ. An anthology of CQ articles 

about oscar stations. 

MFJ-3101, $9.95. Fox Hunt 

Adventure. Relive a sense of mystery 

as young Ben discovers amateur 

radio and emergency services. 

Great gift for a young lad.

ARRL License Study Guides & Books 

ARRL-0977, $29.95. 

ALLyou need to 

become an Amateur 

Radio Operator! 

Every page presents 

information you will 

need to pass the 

exam and become an 

effective operator. 

Easy-to-understand 

“bite-sized” sections. 

Use this book to pass 

the 35 question 

Technician license test. Includes the latest 

question pool with answer key, for use 

through June 30, 2014. Software included 

featuring the ARRL Exam Review CD- 

ROM. Designed for self-study and classroom 

use. Intended for all newcomers and 

instructors, and school teachers. 

ARRL 2012-2013 Repeater Directory Get on the air with HF Digital! 

ARRL-5347, $10.95. 

The best directory of frequencies for the thousands 

of repeaters around the country. 

Includes popular D-Star and APCO-25 

repeaters. Also has handy references for operating 

practices, emergency handling and more. 

Pocket-sized (3.75Wx5.25 inches) directory 

lets you take it with you on the run, in the 

field or on a business trip or vacation. Don’t 

forget to throw it in the briefcase or place it in 

your glove compartment when you travel! 

ARRL-8119, $29.95. 

Upgrade to General 

and enjoy the thrill of 

the world-wide HF 

bands! All you need to 

pass your General 

class exam! All the 

exam questions with 

answer key, for use to 

June 30, 2015. 

Software included featuring 

the ARRL Exam 

Review CD-ROM. 

Detailed explanations 

for all questions, including FCC rules fo 

when you upgrade and get on-the-air. Pass 

the 35-question General Class exam -- The 

exciting world of HF, DX and meeting new 

friends all around the world awaits you! 

ARRL-5170, $29.95. 

Achieve the highest 

level in Amateur 

Radio! Pass the 50question 

Extra Class 

exam and be the toast 

of your ham club! All 

the exam questions 

with answer key are 

contained in this book 

for use through June, 

2016. Software is 

included featuring the 

ARRL Exam Review CD-ROM. Detailed 

explanations for all questions including FCC 

rules. Being “EXTRA” takes you to the 

final pinnacle of Amateur Radio and affords 

you more operating privileges, plus you get 

the distinction of being one of the top dogs! 

ARRL HANDBOOK ARRL ANTENNA BOOK OPERATING MANUAL 

ARRL-6634, $59.95. 

The ARRL Handbook is 

the most comprehensive 

guide to radio electronics 

and experimentation. 

This book is part reference 

and part applied 

theory. It is filled with 

practical treatments of 

basic electronic fundamentals, 

RF design, digital 

and software radio technology, and 

antenna construction. A fully searchable 

CD-ROM is included. You get fundamental 

theory, practical design and principles, 

antenna systems and radio propagation, 

equipment construction and maintenance 

and most importantly, station assembly and 

management of your ham station. A handy 

equipment testing and troubleshooting 

maintenance guide is also included. 

ARRL-6948, $49.95. 

The ultimate reference for 

Amateur Radio antennas, 

transmission lines and propagation. 

The ARRL 

Antenna Book is THE 

SOURCE for current antenna 

theory and a wealth of 

practical, how-to construction 

projects. Features 

antenna designs enhanced 

by the latest advances in computer modeling. 

Design, build and install any imaginable 

type of antenna -- from the most simple 

wire varieties to specialized or highly optimized 

arrays. Fully searchable CD-ROM 

included and contains additional utility programs 

including YW, TLW, HFTA, Range- 

Bearing, ArrayFeed1 and EZNEC-ARRL 

antenna modeling for Windows. Requires 

Microsoft Windows 98 or later for PCs. 

ARRL-6016, $22.95. 

By Steve Ford, WB8IMY. Everything you 

need to get started in digital radio applications. 

You’ll understand how to set up and operate 

your equipment and software, and make the 

best use of your HF digital station. It’s your 

guide to understanding the most active HF digital 

modes in use today. Expanded setup information, 

varieties of PSK, Packet radio, APRS, 

D-STAR, digital applications in public service 

and emergency operations and much more! 

ARRL-1093, $29.95. 

The ARRL Operating 

Manual is the most complete 

book about Amateur 

Radio operating. It was 

written to help guide you 

through the dozens of ways 

hams communicate with 

each other. It contains 

information that every ham 

needs to explore new activities, 

find new references and more. 

Contains information about Amateur Radio, 

VHF/UHF-FM Repeaters, Emergency 

Communications, Traffic Handling, DXing, 

Contesting, HF Digital Communications, 

Image Communications, Amateur Satellites, 

FCC Rules and You, Operating Legally, 

Safely and Appropriately, Operating Awards 

and Callsign Prefix Listings, Antenna 

Bearing Maps, Abbreviations and more. 

ARRL Log Book ARRL Peridodicals CD Small Antennas Emergency Power 

ARRL-1250, 

$7.95. 

You need this 

for your operating 

station! 

Keep it close 

nearby to log 

all of those 

contacts you’re 

going to make 

in ham radio! 52 log pages with 

room for 25 contacts per page. 

You get 1,300 total log entries. 

The perfect sprial bound ARRL 

log book is 8.5x11 inches. 

ARRL-5651, 

$24.95. 

Fully-searchable 

collections of 

popular ARRL 

Journals. Every 

word and photo published 

throughout the year is included! 

Search the full text of every 

article by entering titles, call 

signs, names, drawings and 

tables -- almost any word. 

Features, columns and product 

reviews, plus all advertisements. 

Print what you see! 

for Small 

Spaces 

ARRL-8393, 

$22.95. by 

Steve Ford, 

WB8IMY. A 

resource for 

radio amateurs 

who live in 

apartments, 

condos or on 

small lots. Filled with practical 

advice to find the right antenna 

design to fit your space. Get on 

air despite your environment. 

for Radio 

Communications 

ARRL-6153, 

$24.95. by 

Michael Bryce, 

WB8VGE. 

Explore the various 

means of 

electric power 

generation, from 

charging batteries, 

to keeping the lights on. 

This book covers the foundation 

of any communications installation 

-- the power source. 

MFJ . . . the World Leader in Amateur Radio Accessories! 79

• INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • 

• INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX 

43’ Vertical Antennas . . . Pages 75, 127 

43’ Vertical Range Extender . . . 75, 127 

AC 

In-Rush Current Protection…Pg. 119 

Line Monitor … Pg. 18 

Multiple RFI filter outlets…Pg 22, 50 

Accessories 

6-Meter Radio…Pg. 49 

FT-817…Pg. 55 

HT…Pg. 55-60 

QRP transceiver…Pg. 47-49 

TNC (Packet Radio)…Pg. 51 

Active Antenna…Pg. 34, 45, 134 

Adapters 

Audio cable…Pg. 33, 34, 51 

Cable ...Pg. 83 

Cigarette Lighter… Pg. 15 

Connectors…Pg. 14, 58-59 

Parallel printer to USB…Pg. 51 

RS-232 to USB…Pg. 51 

Adventure Radio…Pg. 49 

Air Coils (Inductors)…Pg. 82 

Alarm Clocks…Pg. 52-54 

Aluminum Tubes…Pg. 128 

Ameritron… Pg. 87-102, 136 

Amplified Speaker . . . Pg. 42 

Amplifier 

6-Meter…Pg. 48, 130 

Amateur TV (ATV)… Pg. 46, 130-132 

Commercial…Pg. 132 

Dual band (VHF/UHF)…Pg 131 

Headphone Volume…Pg 51 

HF …Pg. 87-95, 136 

HT…Pg 129-131 

Marine…Pg 130 

Repeater…Pg 132 

Solid State Pgs. 93-95, 129, 132, 136 

VHF…Pg 129-132 

UHF…Pg 129-131 

AmplifierSaver…Pg 19, 96 

Amtor Reader … Pg 44 

Analyzers Battery Holder . . . Page 84 

Commercial .. Pg 14 

Custom … Pg 14 

Current Balun … Pg 15 

UHF…Pg 14, 16, 17 

VHF…Pg 14-16 

Analyzer Accessories 

Dip Coil …Pg 15 

Filter … Pg 15 

FM Signal… Pg 18 

Pouch … Pg 15, 17 

Anderson Powerpoles… Pg 30-33 

Antennas 

6-M Pg 57-59, 62-63, 109, 111-113, 123 

Active/receiving… Pg 45, 134 

Analyzers…Pg 14-18 

Apartment…Pg 67, 69 

Automatic Rotator Controller . . . 118 

Balanced Line … Pg 12, 68, 70 

Band Module . . . Page 47 

Battery Holder . . . Page 84 

Big Ear Portable Dipole . . . Pg. 75 

Big Stick Vertical Antenna . . . Pg. 75 

Books…Pg 78-79 

Boomer . . . Pg. 114 

Bridge … Pg 18 

Chimney Mount . . . Page 128 

Coin, Morse . . . Page 47 

Coupler, shaft . . . Page 82 

Cushcraft . . . Pgs 103-115 

DC Power Cords . . . Page 31 

Dipoles…Pg 46, 48, 70,73,110,124, 126 

Dipole Mount . . . Page 72 

Dual Band (VHF/UHF)…62-63, 109, 

111-113, 123, 

End Fed Zepp . . . pg. 68 

Eve Mount . . . Page 128 

FeatherLiteTM . . . Page 74 

Folded Dipole… Pg 48, 70 

HF Beams/Mono 107-108,110,115,121- 

122, 124 

HF Mobile…Pg 60, 64-69 

HF Portable…pg 58, 65, 67, 69 

HF Vertical.P74-77,105-107,117,124-127 

HT…Pg 55, 57 

Humidities in/out . . . Page 52 

Hy-Gain . . . Pgs 121-128 

Hy-Tower…Pg 124-125 

Kit, Wire Antennas . . . Page 70 

Little Tarheel Antenna . . . Page 66 

Long John . . . Pages 122, 124 

Loop… Pg 13, 74 

Mobile(VHF/UHF)…Pg 59-60 

Moxon . . . Page 63 

Penetrator . . . Page 124 

Phase Meter . . . Page 16 

Ringo . . . Pgs. 111-112 

Roll-up…Pg 57 

Rotatable Dipole . . .Pg. 73, 110, 124 

Satellite…Pg 123 

Scanner…Pg 57, 62 

ScrewDriver…Pg 64, 66, 97 

Shortwave…Pg 124, 145 

Squalo . . . Page 115 

Switches . . . Pg. 23-25, 101-102 

Tarheel . . . Page 66 

Telescopic…Pg 58, 64, 65 

Tilt Base Mount . . . Page 75, 127 

Tri-Bander . . . P 60,62,65108,110,121 

Tripods . . . Page 75, 126 

Verticals…P.74-76,105-107,117,124-127 

VHF/UHF base…Pg 64-65, 123, 

VHF/UHF Beam…Pg 62, 113-114, 123 

WiFi Antenna . . . Pg. 86 

Window Mount…Pg 69 

Wire…68-70 

Antenna Anchor…Pg 128 

Antenna Base…Pg 71, 74-75, 127 

Antenna Bridge…Pg 14 

Antenna Feedthrough Panel…Pg 77 

Antenna hardware…Pg 128 

Antenna Insulator…Pg 70, 126, 128 

Antenna Mast…Pg 71-73, 75, 127-128 

Antenna Mounts 

Adaptors . . . Pg. 74 


Dipole Mount . . . Pg. 72 

Eve Mount . . . Page 128 

Fold-over Adaptor . . . Pg. 61, 85 

License Plate…Pg. 67 

Mobile…Pg 61 

Magnetic Mount…Pg 61, 63 

NMO…Pg 61 

Portable base…Pg 74 

Quick Connect Adaptor . . . Pg. 61, 85 

Stands…Pg 75 

Tilt Vertical Mount . . . Pages 75, 127 

Trailer Hitch . . . 67 

Vertical…Pg 71, 74-75, 127 

Wall Mount . . . Page 128 

Antenna Noise Bridge…Pg 18 

Antenna Rope…Pg. 73 

Antenna Rotator…Pg. 118-120 

Antenna Switch 

2-Position… Pg. 23-25 

3-Position . . Pg. 23 

4-Position… Pg. 26-27, 101 

5-Position…Pg. 101 

6-Position… Pg. 24-25 

8-Position…Pg. 101 

Antenna/Transceiver…Pg 24-25 

Automatic…Pg. 28, 102 

Balanced Line … Pg. 25 

Coax Patch Cable …Pg 10, 25 

Desktop … Pg. 24, 101-102 

HF … Pg. 23-25, 101-102 

Radio Control…Pg. 93, 95 

Remote … Pg. 24, 101-102 

Antenna Tester…See Analyzer 

Antenna Tuners 

2-Meter (VHF)… Pg 11 

220 Mhz… Pg 11 

440 Mhz (UHF)… Pg 11 

200 Watts ... Pg. 4, 10-11 

300 Watts…Pg 2, 9-10, 12, 135 

6-Meter… Pg 11 

Artificial Ground…Pg 8, 70 

Automatic …Pg, 2-5 

AutoTuner Extender … Pg 13 

Balanced Line… Pg 12 

C-Matcher (HF) …Pg 13 

Differental T... Pg 7, 133-134 

Dual band . . . Page 10 

Kilowatts (KW) …Pg. 6-8, 100, 123 

L-Matcher (HF) … Pg 13 

Loop … Pg 13 

Matcher … Pg 13 

Mobile…Pg 8, 133-134 

Mobile Matcher … Pg 13 

PowerLite…Pg. 69 

QRP… Pg. 10, 47-49 

Random Wire…Pg. 10 

Remote . . . Pg. 2, 5 

Roller … Pg 6-9, 100, 133 

Shortwave (SWL)…Pg 45 

UltraLite…Pg. 69 

Wire Antennas…Pg. 68-70 

Travel… Pg 11, 47 

Artificial Ground/Tuner…Pg 8 

ARRL Books . . . Page 79 

ASCII Decoder/Reader… Pg 44 

Atomic Clocks/Watches…Pages 52-54 

Atomic Weather Station…Pg 52-54 

Attenuator…Pg 19 

ATV Tramsmitter…Pg 46 

Audio 

Amplifier…Pg 42, 57 

Filters…Pg. 43 

HamProAudio…Pg 40-41 

Microphone Conditioner…Pg 40-41 

Microphone Equalizer…Pg 40-41 

Microphone…39, 49, 52, 55, 56, 

Headphone Selector/Mixer -Pg 40-41 

Signal Generator…Pg 19 

Transmit Processor…Pg 40-41 

SO2R Switches…Pg 40 

Balanced Line 

Analyzer Adapter…Pg. 15 

Antenna Tuners… Pg. 12 

Cable/Wire … Pg. 12, 73 

Dipole Anternna … Pg. 12, 70 

Insulators … Pg. 12, 73 

Balun 

Analyzer …Pg 15, 68, 70-71 

Box…Pg 71 

Current…Pg. 47, 68, 71 

Hy-gain Balun…Pg 126 

Unbalun…Pg 71 

Banana Plug…Pg 51, 85 

Band Module . . . Page 47 

Batteries 

Battery Holder . . . Pg. 84 

Booster…Pg 30 

18650 . . . Page 16 

Charger…Pg 16, 59 

Conditioner(voltage)…Pg 30 

Rechargable (Ni-Mh)… Pg 16 

Beacon Monitor (DX)…Pg 46 

Bencher Paddle…Pg 34 

Bias, Amp auto…Pg. 119 

Bias-T Power Injector … Pg 22 

BigEar TM Dipole . . . Page 72 

BigStick TM Vertical . . . Page 72 

Books…Pg 78, 79 

Bulbs, light/Lamp…Pg 84 

Booster… See amplifier, batteries 

Bug Catcher . . . Page 65 

Capacitors…Pg 13, 82, 84 

Cables…see Wires & Cables 

Cable Adapter…Pg.83 

Cable Crimper…Pg 31 

Cable Gripper . . . Pg. 128 

Cases Analyzer pouch…Pg 15-17 

Carrying, Form-Padded … Pg 14 

Hand Held Radio (HT)…Pg 59 

Code reader…Pg 38 

Code tutor… Pg 37 

Equipment…Pg 18 

Lap Top Computer…Pg 14 

Cat-5 Cable . . . Pg. 24 

Chargers, Batteries…Pg 17, 59 

Chimneys, Glass…Pg 83 


Chokes…Pg 28, 83 

Cigarette Lighter Adtr Cable . . . 30, 51 

Clamps Antenna . . . Pg. 128 

Hose . . . Pg. 128 

Mast . . . Pg. 128 

Classroom Morse Code Tutor…Pg 37 

ClearTone Speakers…Pg 42 

Clips, Coil...Pg 82 

Clips, Dummy Load…Pg 83 

Coaxial Patch Cables… Pg 10 

Coaxial Patch Panel . . . Pg. 27 

Code Practice Oscillator…Pg 37 

Code Tutor… Pg 37 

Code Reader… Pg 35-36, 38, 44 

Coffee Mug…Pg 59 

Coin, Morse . . . Page 47 

Commercial Amplifier…Pg 130 

Communication Headphone…Pg 44 

Components…Pg 82-85, 116, 128 

Computer Cables . . . Pg. 51 

Computer Keyboard…Pg 36 

Computer Interface . . . 44, 50, 51 

Computers Interface Cable See Wire 

USB printer converter…Pg 51 

USB to serial adapters…Pg 51 

Computer Controller SO2R…Pg 40 

Computer Software…Pg 51 

Connectors…Pg 31, 61, 85 

Controller Scrw Drvr Antenna...66, 97 

Cords…See Wire and Cables 

Counters Frequency…Pg 18 

Turn Counter …Pg 82, 84 

Crank knobs . . . Pg. 82 

Coupler, shaft . . . Page 82 

Coupler, 3/8-24 . . . Page 85 

Cross Needle Meters…19-23, 93, 133 

Cross Needle Panel Meter…Pg 84 

Crystal Radio Kit…Page 135 

Curtis Keyers…Pg 34-35, 134-135 

Curtis Keyer Chip…Pg 34 

Cushcraft Antennas…Pg. 103-115 

CW (also see Morse Code) 

Filter…Pg 43, 134-135 

Keyer/Keyboard/Paddle…35-36 

Reader…Pg 36, 38 

CW Keyer…See Keyer 

CyberEar…Pg 42 

DC Battery Booster…Pg 30 

Battery Voltage Conditioner…Pg 30 

Power Injector … Pg 22, 26 

Power Outlet Strips…Pg 31 

Power Supply . . . Pg 31-33 

Decoders/Readers…Pg 36, 38 

Desk Mic…Pg 39 

Digi-X…Pg.49 

Dip Coil … Pg 15 

Dip Meter…Pg 16 

Dipoles, Antenna 68-70,72-73,110,124, 126 

DSP Filter…Pg 43, 51 

Dual Band Amplifier…Pg 121 

Dual Band Antenna (VHF/UHF) 

HT…Pg 57 

Mobile…Pg 59-60 

VHF/UHF Base…62-63,111-112,114,123 

Dual Band Antenna Tuner . . . Page 10 

Dual Channel Intelligibility . . . Pg. 42 

Duplexer…Pg. 29, 60 

DX Beacon Monitor…Pg. 46 

Dummy Loads 

Dry Load…Pg. 26-27, 100, 134 

Load W/Wattmeter… Pg. 27 

Fan Cooled … Pg. 27, 100, 134 

Handheld Radio…Pg. 60 

HF … Pg. 26-27, 100, 134 

Handy … Pg. 26 

QRP . . . Page 47 

Wet (oil) load … Pg. 27, 100 

Earphones 

Earbud, EarSpeaker…Pg. 55 

Electronics Kits…Pg. 135 

Element Insluators…Pg. 128 

Element Clamps…Pg. 128 

EmComm, box…Pg. 67 

Equalizer,Transmit Audio…Pg. 40-41 

Equalizer/Conditioner…Pg. 40-41 

Fans, Fan Guides…Pg. 83 

FeatherLiteTM . . . Page 74 

Feedthrough Connectors. . .Pg. 83-85 

Ferrite Toroidal Cores…Pg. 84 

Ferrite Rod…Pg. 83 

FET Amplifier…Pg. 93-95 

Field Strength Meters…Pg. 20-21 

Electronics Amplifier Bias…Pg. 94 

Fiberglass Tube/Pole . . . Pg. 71-72, 75 

Filters AC line…Pg. 26 

Active . . . Pg. 43, 135 

Analyzer… Pg. 15 

Audio…Pg. 43, 135 

Automotive Noise...Pg 29-31 

DSP…Pg. 43, 51 

EMI… Pg. 28 

Hi-Pass…Pg. 29, 134 

Inter Mod…Pg. 60 

Low-Pass…Pg. 28, 134 

Multimode DSP…Pg. 43, 51 

Noise Canceling…Pg. 43 

QRP Transceiver…Pg. 48 

RFI …Pg. 28 

Telephone RFI…Pg. 28 

Tunable… Pg. 15, 43, 135 

TV Interference…Pg. 28, 134 

FM Modulation Meter…Pg. 28 

Folded Dipole Antenna…Pg. 48, 70 

Foot Operated Switch…Pg. 39 

Foam Insert for case …Pg. 14 

Frequency Counter…Pg. 18 

FT-817 Accessories…Pg. 58 

Function Generator…Pg. 18 

Fuses, Automatic…Pg. 29 

Fuse, holder, block…Pg. 29, 97 

Giant Wattmeter . . . Pg. 20, 36 

Glass Chimneys…Pg. 83 

Gold Coin, Morse . . . Page 54 

Graphic Weather Station . . . Page 54 

Grid-Dip Meter… Pg. 14 

Ground 

Anchor point…Pg. 128 

Artificial Ground Tuner …Pg. 8, 70 

Braided Ground Strip…Pg. 97 

Rod…Pg. 8 

Vertical Ground Plane…Pg. 59 

Grab-and-Go…Pg. 67 

Ground Radials…Pg. 75, 125, 127 

Ground Strips . . . Pg. 97 

Guardian Angel … Pg. 29 

Guy Ring…Pg. 70 

Guy Wire Gripper . . . Pg. 128 

Ham Stick . . . Page . . . 65 

Handheld Radio 

(HT) Amp…Pg. 131 

Antenna…Pg. 57 

Battery Charger…Pg. 59 

Carry Pouch…Pg. 59 

Chest Harness…Pg. 59 

Earbud/Mic…Pg. 56 

Earbud Boom/Mic…Pg. 56 

Earphone/Earspeaker…Pg. 55 

Headset/Microphone…Pg. 56 

Intermod Filter…Pg. 60 

Neckset/Microphone…Pg. 56 

Speaker/Mic…Pg. 55 

SWR Wattmeter…Pg. 60 

Vibration Earbud/Mic…Pg. 56 

Waistpack…Pg. 59 

Handle, QRP Transceiver…Pg. 48 

Hardware, Antenna…Pg. 128 

Hardware, mobile Installation…61, 97 

HearingAmplifiers/Enhancer…Pg. 42 

Headphone…Pg. 44 

Headset, HT Mic…Pg. 56 

Heat sinks, tube cap…Pg. 83 

HF Amplifier…Pg. 88-95 

HF Power Cords . . . Page 31 

High Pass Filter… Pg. 29, 134 

Hose Clamps . . . Pg. 128 

Humidity Meter . . . Page 52 

Hy-Gain… pages. 116-128 

Hybrid Phone Patch…Pg 39 

Hy-Tower/Jr….Pg. 124-125 

Hypersil Transformer . . . Pg. 83 

Iambic Keyer…Pg. 34-37, 134-135 

Iambic Paddles. . . Pg. 34-36, 134 

Icom Accessories . . . Page 55-57 

Inductors, Roller…Pg. 7, 9, 82 

InrushCurrent protection…Pg. 94 

Insulators… 

Antenna ends…Pg. 73, 126 

Binding posts…Pg. 52 

Ceramic…Pg. 73 

Compression…Pg. 70 

Feedthru . . . Pg. 83 

Ladder line…Pg. 73 

Standoffs (Spacer)…Pg. 83, 85 

IntelliTuners…Pg. 2-5 

See Antenna Tuners 

Interface, Amp to Radio…Pg. 96 

Interface Cables See Wires and Cables 

Interface, computer . . . 

Soundcard . . . Page 51 

Multimode . . . Page 44 

TNC . . . Page 50 

Jacks…Pg 78 

Kenwood Accessories . . . Page 55-57 

Key, telegraph, CW, Morse Code 

…Pg. 34-38, 134-135 

Keyboard…Pg. 35-36 

Continued on page 81 

80 



• INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • I



Continued from page 80 

Keyer... Pg 34-36, 134-135 

Keyer, Cable . . . Page 34-35 

Keyer, Chip (IC)…Pg 34 

Keyer, Memory…Pg 35-36 

Keyer, Voice…Pg 39 

Kits…Pg 44, 64, 135 

Knobs…Pg 82 

Communication…Pg 38 

Compact…Pg 38 


Lamps, meter…Pg 84 

License Guide (Quick Study) . . . Pg. 78 

License Plate Mount…Pg. 67 

Lightning Arrestors…Pg 23, 28 

Lightning Prtctd Swtchs…23-25, 101-102 

Lip Mount …Pg. 61 

Low Pass Filters…Pg 28, 133-134 

Magnet Mount…Pg 57, 61 

Magnetic switch…Pg 66, 95 

Marine Amplifier…Pg 131-132 

Marine Antenna Tuners…Pg 2 

Mast, Antenna . . . Page 71, 72, 128 

Match Maker…Pg 18 

Memory Keyer…Pg 58 

Memory Keyer Accessories…Pg 36 

Expansion memory…Pg 35 

Mem Keyer/Bencher Combo ...pg 34 

Menu Driver…Pg 58 

Serial Computer cable…Pg 36 

SlimLine…Pg 35 

Menu Driven Memory Keyer…Pg 35 

Meters…also see Wattmeters 

AC Line Monitor… Pg 18 

Cross Needle…Pg. 19-23, 84, 95,133 

Digital Wattmeter …Pg 20 

Dip Meter (grip)…Pg 14 

Direction Finder… Pg 20 

Field Strength…Pg 20-21 

FM Modulation…Pg 18 

Panel…Pg 84 

Phase . . . Page 16 

Power Line Noise…Pg 20 

RF Currents…Pg 19 

SWR…See Wattmeters 

Microphones 

Adaptor cable..Pg 39 

Boom Mic…Pg 39 

Controller Center… Pg 38 

Converter . . . Pg. 38 

Handheld (HT)…Pg 55 

Stands/Holder… Pg 39 

Switch…Pg 38, 51 

MightyLite…Page 32-33 

Millenium Memory Keyer…Pg. 35 

Mini Screwdriver Antenna Pg. 64, 66 

Mirage …Pg. 129-131 

Mobile 

Amplifier HF…Pg. 95 

Amplifier VHF/UHF…Pg. 129-131 

Antenna…See Antenna 

Antenna Mount…Pg. 61 

Power Supply…Pg. 32-33, 95 

Speaker…Pg. 42 

Transceiver Protector . . . Page 30 

Tuner…Pg. 5, 10, 133 

Monitor, Beacon…Pg.46 

Morse Code 

Classroom Tutor…Pg 37 

Decoder/Reader… Pg 36, 38 

HT CW interface…Pg 58 

Iambic keyer… Pg 34-36, 134-135 

Iambic Paddle…Pg 34-36, 134-135 

Key…Pg 34, 36-37 

Keyers…Pg 34-36 

Oscillator… Pg 34, 37 

Sender… See keyer/keyboard 

Tutor …Pg 37 

Morse Coin . . . Page 54 

Mounts, See Antenna Mount 

Moxon Antennas . . . Page 63 

MultiReader…Pg. 36, 38, 44 

Multi-band Dipole . . . Page 73 

MultiMode Computer Interface ... 44 

Nano-size Keyer/Paddle Combo... 34 

N connector…Pg. 85 

NMO Mount . . . 61 

Noise Bridge…Pg. 14 

Noise Canceling Filter…Pg. 43 

Noise Finder . . . Pg. 19 

OCFD Wire Antenna…Pg. 69 

On/Off Remote Switch . . . Pg. 97 

Order form…Pg. 86 

Packet Data Radio…Pg. 50-51 

Packet Radio Accessories…Pg. 51 

Packet Mic/Radio Switches . . . Pg. 51 

Packet Modem…Pg. 50, 51 

Paddle, keyer…Pg. 34-36, 134 

Panel Meters…Pg. 84 

Parts…Pg. 82-85, 116, 128 

Patch Cords…See Wires and Cables 

Penetrator, Super . . . Page 124 

Phase Meter . . . Page 16 

Phone Patch…Pg. 39 

Pin Diode T/R Switch…Pg. 96 

Pipe Clamp . . . Page 126 

Plugs…Pg. 85 

Pocket size Morse Reader . . . Pg. 38 

Pocket Travel Keyer…Pg. 34 

Pointers…Pg. 82 

Pole, Antenna 

Aluminum . . . Pg. 71, 128 

Clamps . . . Pg. 71, 128 

Fiberglass . . . Pg. 71, 72 

Steel . . . Page 128 

Potentiometers, Rotator…Pg 116 

Pouches 

Analyzers … Pg 15-17 

Code Reader…Pg 38 

Code Tutor…Pg 37 

Power Cords . . . Page 31 

Power Injector . . . Page 26 

Power Line Noise Finder …Pg 20 

Power Outlet Strips, DC…Pg 29 

Power Outlet Strip, AC…Pg 26, 50 

PowerLite TM Antenna . . . Page 69 

Power Supply 

FT-817…Pg. 58 

Linear…Pg. 32 

Portable…Pg. 18, 32-33 

QRP…Pg. 48 

QRP SWR/Wattmeter…Pg. 20, 95 

Switching…Pg. 31-33 

Variable … Pg. 19, 31-33, 95 

Power Tubes…Pg. 83, 102 

Pre-amplifier, RF…Pg. 132 

Pre-amplifier, shortwave Pg. 45, 136 

Pre-selective(Passive/Active) P.45, 136 

Protector, Transceiver . . . Page 30 

Push-to-Talk (PTT) Foot switch ... 39 

QRP band module . . . Page 47 

QRP Dummy Load . . . Page 47 

QRP Pocket Transceiver . . . Page 47 

QRP Radio . . . Page 47-49 

QRP Tuner . . . Page 47-48 

QRP Wattmeter . . . Page 47 

Quick Clamp . . . Pg. 71 

Radials, Ground P 75,117,119,125,127 

Radio 

Crystal…Pg. 135 

CW…Pg. 47-48, 135 

Data…Pg. 50 

QRP…Pg. 47-49, 135 

Shortwave…Pg. 44, 135 

SSB…Pg. 49 

Radio Cntrl'd Clocks/watches 52-54 

Radio Interface for Amp…Pg. 96 

Radio/Mic Switches…Pg. 38 

Radio Teletype (RTTY) Reader… 44 

Radio Voice Mail…Pg. 58 

Rain Gauge (Weather Station)… P54 

RAK, rotators…Pg. 120 

Range Extender . . . Page 75, 127 

RAS, rotators…Pg. 120 

REAL, rotators…Pg. 120 

Receivers 

2-Meter FM…Pg. 135 

Shortwave…Pg. 44, 135 

Regenerative Receiver…Pg. 44, 135 

Relays…Pg 84 

Relay, Remote Switches…28, 101-102 

Remote Control Auto Tuner…2-5 

Remote Pad Auto Tuner…Pg. 3 

Remote Pad for Amplifier…Pg. 95 

Remote Control Rotator . . . Pg. 119 

Remote Auto Tuner . . . Pages 2-5 

Repeater 

Amplifier (VHF/UHF)… 130 

HT…Pg 58 

Resistors, Dummy Load…Pg 83 

Resistor Clips…Pg 83 

RF 

Amp Meter…Pg. 20 

Bypass Switch…Pg. 13 

Clamp-on Amp…Pg. 20 

Connectors…Pg. 85 

Harmonic Filter…15, 60 

Isolator…Pg. 71 

Transformer… Pg. 13 

Safety Switch … Pg. 24 

Sense (T/R) … Pg. 24 

RFI Chokes… Pg 28 

RFI Filter AC Outlets … Pg. 23, 50 

RFI Meter/Sniffer…Pg 19 

Ring, Guy…Pg. 70 

Ringo, Ringo II . . . Pgs. 111-112 

Rod, Ground…Pg 8 

Rohn Steel Masts . . . Page 128 

Roller Inductors… Pg 78, 82 

Rotator… Pg. 118-120 

Rotator Brake Delay…Pg. 116 

Rotator Controller . . . Page 118 

Rotator Parts . . . Pg. 116 

Rotator Potentiometer…Pg. 116 

Rotatable dipole…Pg. 72-73,104, 124 

RS-232 to USB adapter . . . Pg. 52 

Scanner, Antenna…Pg. 57, 62 

Screwdriver Antenna…Pg. 66, 97 

Screwdriver Antenna Controller 66,97 

Service Information…Pg. 85 

Shaft Coupler . . . Page 82 

Shipping & handling…Pg. 85 

Shortwave Antenna…Pg. 45, 134 

Shortwave Receiver…Pg. 44, 135 

Shortwave Converter…Pg. 44 

Shortwave Pre-amplifier…Pg. 45 

Signal Injector/Tracer…Pg. 18 

Signal Generator Audio…Pg 18 

Sine/squre/triangular . . . Pg 18 

Slimline Keyer/Memory Keyer...Pg.35 

Software, Soundcard Interface . . . 51 

Solar Power Clock…Pg 52-53 

Soldering Kit…Pg 135 

Solid State Amplifier 93-95,129-132,136 

Soundcard Extension box…Pg 51 

Soundcard Interface…Pg 51 

Spacers…Pg 83 

Speakers 

Amplified…Pg 42 

Bookshelf…Pg 42 

CB…Pg 42 

ClearTone…Pg 42 

Communication…Pg 42 

Compact…Pg 42 


Speech Articulator…Pg. 40 

Speech Intelligibility Enhancer ... P42 

Spike Protector, AC…Pg. 26, 50 

Spike Protector, Lightning…Pg. 26, 50 

Spindle knob . . . Pg. 82 

Squalo Antenna . . . Page 115 

SSB Filter…Pg 43 

SSB Transceiver…Pg 49 

Stand, Antenna…Pg 72 

Stand, Microphone…Pg. 39 

Straight Key…Pg. 37 

Switches See Antenna Switch 

Foot…Pg. 39 

Microphones…Pg. 38, 40 

QSK …Pg. 96 

Receiver Audio…Pg. 40 

RF Bypass… Pg. 13, 28 

RF Sense T/R. Pg. 28 

Rhinos TM . . . Page 23 

Rotary…Pg. 82 

SO2R Switches…Pg. 40 

TNC to Radio Switch…Pg. 51 

Transmitter…Pg. 27 

Switching Power Supply…P 32-33, 95 

SWR 

Analyzer…Pg. 14-17 

SWR meter…See meter 

SWL…See Shortwave 

Surge Protector, AC…P 26, 50 

Surge Protector, Lghtng P23, 25,28-29 

Tarheel Antenna . . . Page 66 

Telegraph Key…Pg. 37 

Telephones, Radio Patch…Pg. 39 

Telescopic 

Aluminum pole…Pg. 71, 127-128 

Antenna…Pg 57-58, 64, 75, 127 

Fiberglass . . . Page 71-72 

Steel . . . . Page 128 

Temperature In/Out . . . Page 52-53 

Test Equipment 

AC Line monitor…Pg. 19 

AC Power Outlets…Pg. 20, 50 

Antenna Analyzer . . . Pg. 14-17 

Attenuator…Pg. 18 

DC Power Outlets…Pg. 32 

Dummy Load…Pg. 27 

Field strength meter…Pg. 20, 21 

FM Signal Analyzer… Pg. 18 

Frequency Counter…Pg. 18 

Function Generator…Pg... 18 

Power supplies…Pg. 19, 32-33 

RF Current Meter (Ammeters)... 19 

Signal generator, Audio…Pg. 18 

SWR/Antenna Analyzers…14-17 

Wattmeters/SWR…See wattmeters 

Thermometers (Wthr Stn)…Pg 52-54 

Tilt Vertical Base Mount . . . 75, 127 

Timers, ID (clocks)…Pg. 52-53 

TNC Accessories…Pg. 51 

TNC …Pg. 50 

TNC-X…Pg. 50 

Tool, PowerPole Crimper…Pg. 29 

Tool, Guy Wire Gripper . . . Pg. 128 

Tower Base…Pg. 125 

Trailer Hitch Mount . . . Page 67 

Transceivers 

2-Meter…Pg. 49-50, 135 

6-Meter FM….Pg. 49, 135 

Accessories…Pg. 47-49 

CW…Pg. 47-48 

Data Radio…Pg. 50 

Packet Radio Data…Pg. 50 

QRP…Pg. 47-49 

SSB…Pg. 49 

Voltage Conditioner…Pg. 30 

Transformers…Pg. 83 

Transceiver, Protector . . . Page 30 

Transmit Audio Equalizer… 40-41 

Transmit Audio Conditioner…40-41 

Transmitter, ATV…Pg. 46 

Transmitter, Kits…Pg. 135 

Transmitting Tubes…Pg. 83 

Travel Keyer …Pg. 34 

Travel Radio…Pg. 49 

Tri-band Antenna . . . P 57, 60, 63, 123 

Tri-plexer . . . Page 28 

Tripods, Antenna . . . Page 72 

Tunable Filter… Pg. 43, 135 

Tuner Range Extender . . . 75, 127 

T/R switch…Pg. 24 

Tube, Aluminum…Pg. 71, 127-128 

Tube, Fiberglass . . . Pg. 71 

Tubes 

Ceramic…Pg. 83 

Chimney…Pg. 83 

Glass…Pg. 83 

Sockets…Pg. 83 

Transmitting…Pg. 83 

Vacuum…Pg. 83 

Tuner…See Antenna Tuners 

Tuning Aid 

Amplifier…Pg. 18, 96 

Antenna Tuner…Pg. 18 

Tuning Stick…Pg. 84, 92 

TVI Chokes…Pg. 28, 134 

TVI Filters… Pg. 28, 134 

UHF Amplifier…Pg. 130-132 

UltraLite TM Antenna . . . Page 69 

Universal Mic-Interface…Pg. 38 

Universal SO2R Switch…Pg. 40 

Universal Vertical Tilt Base 75, 127 

USB Adaptor . . . Pg. 51 

USB Cable . . . . 51 

Vacuum Relay . . . Pg. 84 

Variable Capacitors…Pg. 13, 82 

Variable Power Supply…Pg. 18, 32-33 

Vectronics…Pg. 133-135 

Vertical Tilt Base Mount . . . 75, 127 

VHF Amplifier…Pg. 129-132 

Vibration Earbud Mic…Pg. 56 

Voice Keyer… Pg. 39 

Voice Mail, Radio…Pg. 58 

Voltage Conditioner . . . Pg. 30 

Waistpack…Pg. 59 

Wall Mount . . . Page 128 

Warranty Information…Pg. 85, 102 

Warranty, Extended…Pg. 102 

Watches, Atomic…Pg. 54 

Wattmeters 

6-Meter…Pg. 21-23, 132-133 

Automatic…Pg. 20, 22 

Balanced line…Pg. 19 

Cross Needles…19-23, 25-26,93,133 

Digital… Pg. 22 

Dual Band 

(VHF/UHF) Pg. 21-23, 133 

Field strength…Pg. 20-21 

Flat Panel Meter . . . Pg. 22, 93 

Giant…Pg. 20, 23 

Grandmaster … Pg. 21-22 

HF/VHF/UHF…20-23,132-133. 

Handheld Radio… Pg. 60 

Mobile…Pg. 22, 60 

Peak Reading 20-23, 93, 132-133 

QRP…Pg. 20, 49 

Removable Sensor…Pg. 93, 132 

RF Ammeter…Pg. 19 

SWR… 20-23, 60, 93, 100, 132-133 

Weather Forecast Station . . . Pg. 53 

Weather Stations…Pg. 52-54 

WeFax Decoders…Pg 44 

Whip Ferrules . . . Pg. 85 

WiFi Desktop . . . Pg. 86 

Wi-FI Antenna…Pg. 86 

Wi-Fi Extension Cables…Pg. 86 

Wi-Fi Flexible Antenna . . . Pg. 86 

Wi-Fi Remote Antenna . . . Pg. 86 

Window HT antenna mount… Pg. 59 

Window Feedthrough Panel… Pg. 77 

Wire Anatennas . . . Pages 68-69, 70 

Wire Antenna Kits . . . Page 70 

Wire Antenna Insulators . . .70,73, 128 

Wires and Cables 

Amplifier to Radio…Pg. 93, 95-96 

ALS-500M DC Harness…Pg. 97 

Audio cable adaptors…Pg. 51 

Automatic Tuner Interface…Pg. 2-4 

Braided Ground Strips…Pg. 97 

Cat-5 Cable . . . Pg. 28 

Cigarette Lighter Adapter…31, 51 

Coaxial Patch cable…Pg. 10 

Coaxial Pigtail…Pg. 123, 126 

Copper Antenna …Pg. 73 

DC Power…Pg. 31, 51, 97 

DSP Filter…Pg. 43 

Feedpoint . . . Pg. 114, 123, 126 

HT Cables…Pg. 51 

Keyer Patch cable… Pg. 34-35 

Ladder line…Pg. 73 

Microphone…Pg. 39 

Modem cable…Pg. 51 

Morse Code Reader… Pg. 38 

Open End Audio cables…Pg. 51 

Packet Radio Cable…Pg. 51 

Power Cord . . . Pg. 31, 51, 97 

Printer Cable…Pg. 51 

Radio to Computer Interface…Pg. 51 

Rotator Cable…Pg. 116 

RS-232 to USB Adaptor . . . Pg. 51 

Serial Cable…Pg. 51 

Serial Y-cable…Pg. 51 

TNC Pre-wired Cable…Pg. 51 

TV twin lead…Pg. 73 

USB . . . 51 

VHF Power Cable . . . Page 31 

WiFi Extension Cable . . . Pg. 86 

Wire Clips…Pg. 82 

Wire Rope…Pg. 73 

World Time Clock . . . Pg. 52 

Wouxun Accessories . . . Page 55 

X-Digi…Pg. 50 

Yaesu Accessories . . . Page 55-60 

Yagi Antenna 

HF/VHF/UHF/Wi-Fi. . . Pg. 62, 86, 108- 

111, 113-115, 121-124 

81 


• INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX • INDEX •

Select MFJ hard-to-find Components for your Homebrew Projects 

Air Variable Capacitors 

A. B. C. D. 

Figure Part No. # 

A 282-2005 

A 282-8700 

BBBCD* 282-2010 

282-2012 

282-2150 

282-2006 

282-5050-1 

D* 282-5160 

Price 

$23.85 

$14.95 

$17.25 

$16.02 

$18.90 

$18.51 

$19.62 

$17.97 

Cap. pF 

16-208 

10-26 

2-10 

5-51 

6-154 

12-313 

5-67 

6-180 

VRMS 

1000 


640 

1000 

640 

640 

1200 

350 

Gap Plates Dimensions 

.032” 50 1.4Wx1Hx3D in. 

.080” 18 1.4Wx1Hx2.8D in. 

.016” 2 1.4Wx1Hx1.7D in. 

.032” 13 1.4Wx1Hx1.1D in. 

.016” 20 1.4Wx1Hx1.3D in. 

.016” 40 1.4Wx1Hx1.7D in. 

.045” 15 1.2Wx1.3Hx1.3D in. 

.010” 15 1.2Wx1.3Hx1.3D in. 

* Items D are broadcast style variables and are used in MFJ Analyzers and 

Transceivers. A 8:1 Vernier drive is built into the capacitor. 

High Voltage Air Variable Capacitors 

A. B. C. D. E. 

Figure Part No. # Price Cap. pF VRMS Gap Plates Dimensions 

A 282-2007-1 $30.94 10-125 3.5 kV .120” 27 2.5Wx3.6Hx6D” 

A 282-2018-1 $35.68 10-250 1.5 kV .045” 37 2.5Wx3.6Hx6D” 

A 282-2008-1 $53.68 10-250 3 kV .120” 53 2.5wx3.6hx10.8d” 

B 282-2009-1 $61.64 75-500 1.5 kV .075” 75 2.5wx2.6hx10.8d” 

C* 282-2015 $53.52 10-300 3.5 kV .120” 79 2.5wx2.6hx10.8d” 

D* 282-2020 $70.56 40-493 1.5 kV .045” 35 3.5Wx4.5Hx6D” 

D* 282-2028 $100.08 50-996 1.5 kV .045” 72 3.5Wx4.5Hx9.6D” 

E* 282-2016 $69.95 12-67 1.5 kV .045” 56 2.5wx3.5hx6D” 

E* 282-2017 $89.95 18-136 1.5 kV .045” 112 2.5wx3.5hx10.8d” 

D* 282-2026 $100.08 50-916 1.5 kV .045” 72 insulated rotor sections 

Item C is a differential capacitor, as used in the MFJ-986 antenna tuner. Items D are 

dual-gang capacitors, capacitance specified is total capacitance. Items E are butterfly 

tuning capacitors. Used in MFJ loop tuners, have no rotating contacts, super low losses. 

Amplifier high-voltage Variable Caps 

A. B. C. D. 

Figure Part No. # Price Cap. pF VRMS Gap Plates Dimensions 

A 282-2113 $26.19 20-823 800 V .017” 23 x 3 1.8Wx1.8Hx3.3D” 

B 282-2112-1 $36.52 20-250 2.5 kV .075” 37 2.8Wx2.6Hx5D” 

B 282-2572-1 $46.18 20-405 1.5 kV .045” 37 2.8Wx2.6Hx4D” 

B 282-2573-1 $57.34 25-800 1.1 kV .030” 53 2.8Wx2.6Hx4.5D” 

C 282-2570 $51.68 20-171 3.5 kV .120” 37 2.8Wx2.6Hx7D” 

C 282-5200 $44.95 20-801 1.3 kV .037” 59 2.8Wx2.6Hx4.5D” 

D 282-3700 $39.95 15-176 

7-23 

2.5 kV .075” 31 2.8Wx2.6Hx6D” 

Used in Ameritron high power linear amplifiers. Items B have delrin insulated shaft. 

Item D has two capacitance sections. 

Shaft coupler for rollers, caps, switches 

725-3105-1, $0.95. 

3/4 Diameter by 1 1 /4” length, Nickel plated brass Shaft Coupler 

for 1/4 inch diameter shaft has two 10-32 hex socket set screws. 

MFJ Knobs, Pointers and Ball Drives 

A. B. C. D. 

E. F. G. H. 

I. J. K. L. M. 

Fig. 

Price Pointer/skirt diam. 

ABC 

$1.25 1 inch 

$2.80 1 

$3.50 

D $3.00 

EF 

$9.95 

$2.35 

G 

$1.95 

H $1.95 

IJKL 

$4.95 

$1.95 

$1.78 

$1.25 

M 

$1.25 

MFJ Knobs are made of the highest quality heat and impact-resistant phenolic resin. Shaft holes fit 1/4” round shaft. 

Knobs have metal inserts. Supplied with set screws. 

1 /2 inches 





7 

/8 inches 

7 




13 Knob dia. 

11 

/16 inch 

1 


13/16 inches 

1 inch 






3 


13 


3 


11 


11 Height 

9 


3 


7 


3 


1 


7/16 inch 




11 


5 


11 Part No. # 

760-0035 

760-0125 

760-2281-1 

760-0550 

760-0275B 

760-0277 

760-0278 

760-0276 

760-2409 


3 760-0176 


7 760-0177A 


5 760-0033 


5 760-1233 


Ameritron Edge-wound 

AirRoller Inductor 

404-1032, $140.00. Flat wire, edge-wound, 

high power air roller inductor. Silver plated 

Cu coil, silver plate contact discs and contact 

shaft. Heavy duty 1/4” thick fiberglass frame. 

16 uH, 31 turns, 2 1 /2” coil dia., 1/4” round 

shaft, 3” shaft length. 2 3 /4Wx3 1 /8Hx8D”. 

Used by Ameritron ATR-30, 3kW PEP SSB. 

MFJ AirCore TM Roller Inductors 

MFJ’s exclusive super heavy duty AirCore TM Roller Inductor has an air 

core that can’t burn up! You get ultra high-Q, the lowest loss, highest efficiency 

and highest power handling of any roller inductor in ham radio. 

MFJ’s exclusive Self-Resonance Killer TM keeps potentially damaging selfresonances 

away from your operating frequency. Large, self-cleaning wiping 

contact gives excellent low-resistance connection without contact arcing 

or burning. A solid 1/4 inch brass shaft with self-align bearings gives 

smooth non-binding rotation. 12 gauge tin-plated copper wire. Silver plated 

contact wheels and shaft. Fiberglass frame. 

A. B. C. 


A 404-1052 

B 404-1056 

C* 404-1060 

Price 

shaft size 

$59.00 

3 

$62.65 

$53.60 

1 /2” 

3” 

21 /2” 

Dimensions 

3Wx3Hx71 /2D” 

3Wx3Hx91 /4D” 

3Wx41 /2Hx71 L. uH Turns Coil Dia. 

33 43 2” 

44 57 2” 

22 31 2” 

/2D” 

*C item has 1/4” round phenolic tuning shaft, has no “self-resonancekiller”. 

A and B have 1/4” round brass tuning shaft. 

Part No. Price: Inductance Coil 

length 

404-0811 $22.95 70 uH 9 

404-0600 $37.95 44 uH 

404-0669 $37.95 79 uH 

404-0700 $37.95 77 uH 

404-0008 $22.95 159 uH 

404-0024 $37.95 35 uH 

404-0009 $22.95 230 uH 

1 Coil 

Diameter 

/2 in. 1 

12 in. 

12 in. 

12 in. 

10 in. 

11 in. 

10.5 in. 

3 /4 in. 

2 in. 

2 in. 

2 in. 

21 MFJ Air-Wound Coils 

MFJ air-wound coils are constructed 

with a solid rigid round acrylic rod and tinplated 

solid copper wires embedded into the 

acrylic rod. They are super strong and superbly crafted. MFJ winds them 

tough so they stay wound. Select a special MFJ air-wound coil for your 

mobile and portable antennas, antenna tuners, amplifiers and other projects. 

Turns 

per Inch 

Wire size 

(AWG) 

10 14 

6 10 

8 12 

8 10 

/2 in. 10 16 

3 in. 4 10 

3 in. 10 16 

755-4001 

MFJ high power RF rotary switches 

82 MFJ . . . the World Leader in Amateur Radio Accessories! 

$3.00 

Silver Plated! 

Edge-Wound! 

Designed to clip on air-wound coil for wire size up 

to AWG 12. 1/4” wide silver plated contact has set 

screw to secure. Contact socket for banana plug. 

A. B. C. D. E. F. 

Fig. Part No. # Price Pos’s Pole Sect. index deg Contact dielectric VAC material dia. 

ABC 500-2026 $24.48 12 1 1 30 9 Amps 1500 glass epoxy 1.44” 

500-2038 $43.68 666666 1 1 30 9 Amps 1500 ceramic 1.88” 

500-2027 $58.32 2 2 60 9 Amps 1500 ceramic 1.88” 

D* 500-2811 $45.60 2 1 30 9 Amps 1500 ceramic 1.88” 

E* 500-2135 $85.40 4 3 30 9 Amps 1500 ceramic 1.88” 

F* 500-3557-1B $147.58 4 2 20 17 Amps 3000 ceramic 2.81” 

B 500-2017 $61.95 2 1 30 9 Amps 2000 ceramic 1.88” 

MFJ high-voltage switches have 3/8-32 bushing and 1/4 inch round shaft. *D, E, and F 

are switches that are specially designed for amplifier band switching. 

Vernier Reduction 

Ball Drive 

729-0142-1, $11.92 

6:1 Tuning Ratio. 

Used in 

Ameritron 

amplifiers 

and tuners. Dial 

plate mounting flange. Two 

pre-tap pointer mounting 

holes, mates with 1/4” shaft, 

has pre-tap set screw holes. 

1 1 /4” shaft, 3 /4”Length. 

Knob Pointers 

726-0227R, $1.55 

Red, 11 /4” Length, 

matches 2” tuning 

knob. 

726-0230R, 

$1.25 

Red 1” Length, 

matches 11 /2” tuning 

knob. 

Both pointers are 

made to fit 729-0142, 

6:1 reduction drive. 

Turn Counter Set 

MFJ-TC11, 

$14.95 

Set includes 

counter 

module, 2 

gears and 

mounting 

bracket. 

Driving gear 

fits 1/4” round shaft. Counter 

ratio is 3:1. Reset button, 3digits, 

counts up to 333 turns.

Select MFJ hard-to-find Components for your Homebrew Projects 

Power Supply, Amplifier Transformers Ameritron sells Eimac (R) Tubes 

These transformers are for building power supplies 

and amplifiers. 406-3800 is designed for 

linear power supplies, that is capable of delivering 

current up to 30 Amps at 13.6 VDC. 406- 

1109-2C is designed for a single 3-500Z tube, 

1000 Watts HF Amplifier. Has buck/boost 

winding. Can be used as a replacement transformer 

for Heathkit SB-1000, AL-80A. 

Fig. 

A 

B 

Part No. # 

406-3800 

406-1109- 

2C 

Price 

$34.95 

$180.00 

Pri. Voltage 

120V 

90-140, 205- 

250 w/buck 

boost winding 

Non-Inductive Resistors 

HT Adapter Cables 

SEC Voltg 

18V 

1. 1047Vac 

2. 22 Vac CT 

3. 5.2Vac CT 

Current 

30A 

.1 Adc 

1.5 Adc 

15 Aac 

Dimensions 

4Wx4Lx3 3 /4H” 

6Wx6Lx5 1 /4H” 

Fig. Part No. # 

A 406-1532 

B 406-1572 

Price 

$105.50 

$142.60 

Dim./Applications 

5Wx4 

B 406-1248-1 $247.00 

1 /4Hx61 /4D 

811A 4-tube 

amplifier 

6Wx51 /4Hx51 A. B. C. D. 

Pri. (Volt) Sec. (Volt) 

110/220 w/ 1500V@.5A 

buck-boost 12V@1A 

6.5V@16A 

110/220 w/ 900V@.5A 

buck-boost 12V CT@1A 

/4D 

572B,4-tube amp 

2250V@.5A 

C 

D 

D 

D 

406-1418-1D 

Hypersil (R) 

406-1419-1J 



$403.00 

$74.00 

$74.00 

$74.00 

110/220 w/ 

buck-boost 

22VCT@1.5A 

12.8V@5A 

110/220 V 2570 Vac@.8A 

110/220 V 

110/220 V 

110/220 V 

5.6V@30A 

14V@2A 

7.7V@21A 

14V@2A 

5.6V@15A 

14V@2A 

A. B. 

Weight 

11 lbs. 

26 lbs. 

Amplifier Power & Filament Transformers 

Specially designed for our most popular HF amplifiers. Has unique buck-boost winding 

to adapt to low or high line voltage conditions. 

Use of electrical silicone steel lamination makes these transformers highly efficient, 

resulting in low loss and producing less heat. Well constructed for low noise and coated 

with varnish. 110/220 VAC. Usable for 50 or 60 Hz. 

6Wx7 1 /2Hx5 1 /4D 

3CX800A7 

2-tube amp 

8Wx7Hx7D 

3CX1500A7 

3CX1200A7/Z7 

2x3-500G amps 

2 1 /2Wx3Hx3 3 /4D 

3-500Z filament 

2 1 /2Wx3Hx3 3 /4D 

3CX1200A7 Filam 

2 1 /2Wx3Hx3 3 /4D 

3CX1500A7 Filam 

These spacers are used to properly 

isolate your dummy load resistor 

from the chassis. Withstands high 

power and high frequencies. 

A. 719C-0500C, $0.50 

A. Ceramic spacer, 1/4” 

diameter by 1/2” long, 6- 

32 threaded holes on 

both ends. 

B. 718D-1000, $1.71 

Delrin spacer, 1/2” 

diameter by 1” long, 8- 

32 threaded holes on 

both ends. 

B. 

Weight 

17 lbs. 

23 lbs. 

33 lbs. 

32 lbs. 

5 lbs. 

5 lbs. 

5 lbs. 

A. B. 

Fig. Part No. # Price 

C. 

Resistance 

D. 

Rating Diameter 

E. 

Length 

A 113-1220 $22.50 22 Ohm 35W cont. 3/4 inches 2.5 inches 




B 

D 

115-1500 

119-1500 

$20.16 

$32.31 

50 Ohm 

50 Ohm 

90W cont. 

200W cont. 

3/4 inches 




D 755-3080 .75 Terminal clip for 3/4” dummy load resistor, requires 2 per resistor. 

E 755-4100 2.76 Terminal clip for 1” dummy load resistor, requires 2 per resistor. 

Feedthru Insulators 

606-1006, $3.95 

Ceramic Feedthroughinsulator 

comes complete 

with hardware. 3/4” diameter 

x11 /4”. Fits 7 /16” dia. chassis hole. 

Release the strain on your HT antenna 

connector with these adapter cables. 

Choose SMA or BNC. Flexible, mini 

coax, 3 ft. 

A. B. 





Insulating Spacers 

Ameritron sells Eimac (R) tubes for 

amateur radio, broadcast and 

industrial uses. Call for a quote! 

A. 3CX800A7 

B. 3CX1200D7 

C. 3CX1500A7 

811A, 572B, 3-500Zs . . . 

Don’t just buy any untested tube that can damage 

your amp. Buy Ameritron fully tested and 

A. 380-0811A, $24.95, 811A tube. warranteed tubes. 

B. 380-0572B, $49.95, 572B tube Match pairs are 

C. 380-0500GT, $219.95, Taylor also available. 

3-500ZG tube 

Fig. 

ABC 

D E 

Part No. # 

50-0080-1 

625-8199 

625-8731-1 

625-8800 

625-8811 

Tube Sockets 

Price 

$32.20 

$2.49 

$35.00 

$50.40 

$3.20 

Fit Tube Type 

3-500Z, 3CX1200A7 

6LQ6 or equivalent 

3CX1500A7/8877 

3CX800A7 

811A, 572B or equiv. 

Tube Plate Caps & Heatsinks 

Tube Glass Chimneys 

#pin 

5 

9 

7 

11 4 

AmplifierPlates and Filament Chokes 

Cooling Fans and Blowers 

A. B. C. 

Manufacturer PN/Description 

custom made glass epoxy socket 

PCB mount pins 

Ceramic 

EF Johnson 124-0311-100 

4-pin ceramic 

A. 

Fig. Part No. # 

A 750-1800 

B. C. D. 

Price Description 

$5.95 Plate cap for 3-500Ztubes. Finned aluminum heat sink 

with set screw. 

B 750-0323 $7.98 

C 

D 

755-3626 

755-6811 

$8.28 

$2.50 

3 /4” dia. by 9 /16” thick. 

Plate cap for 3-500Z tubes. Finned aluminum heat sink 

with set screw. 11 /4” dia. by 5 /16” thick. 

Plate clip for 3CX1500A7/8877 tube. 

Ceramic plate cap for 811A, 572B tubes. 

A. 391-1500, $25.62 

Chimney for 3CX1500A7/8877 tube 

B. 391-3500, $35.47 

Chimney for 3CX1200A7 and 3-500Z tubes. 

A. B. 

Fig. Part No. # Price Description 

A 10-15197 $20.00 Complete plate choke covers 1.8-30 MHz, includes WARC 

bands, 225 uH, handles 1.5A, 4 kV. Wound on 1”dia. x 

5 

B 719F-7380C $7.95 

C 10-15115-1 $19.95 

D 412-0109 $9.00 

5 C. D. 

/8” long glazed ceramic form. Used in Ameritron amps. 

Glazed ceramic plate choke form. 1” dia. by 5” long. 

Both ends tap for 1/4”-20 screw. 

Complete broadband filament choke. Use for 3-500Z, 

3CX800A7, 3CX1200A7 and 3CX1500A7 tubes. 

Handles 30A, covers 1.8-30 MHz. 12 gauge enamel 

wire, bifilar wound on .5” dia. by 4” long ferrite rod. 

Filament choke ferrite rod. 5” dia. by 4” long. Used in 

10-15115-1. 

High output box fans and blowers 

are ideal for cooling amplifiers. 

A. 410-3583, $18.85. 80x80x38.5 

mm, 1800 RPM, 28 CFM, 30 dBA 

noise level, sleeve bearing, 120 

VAC, 60 Hz, w/ 14” wire lead. 

B. 410-4584, $.90. Fan guide. 

C. 410-3138, $43.06, high 

quality box fan by EBM, metal 

housing with metal impeller, 

extremely quite 120x120x38.5 

mm, 61 CFM, 28 dBA noise 

level, sleeve bear-ing, 

120 VAC, 60 Hz, wire 

terminals. 

D. 410-4600, $3.34, 

Metal Fan Guards. 

E. 410-4586, $.99, plastic. 

A. B. C. 

A. B. C. D. E. 

A. B. 

A. 

C. 

B. 

D. E. 


F. 

F. 410-1200, 

$64.95. 

EBM Blower, 

G2S097- 

DB61-08, 110 

VAC, 37 CFM, 45 

dBA noise level. 

Wire leads. 

5 1 /2Wx5 1 /2Hx1 1 /2D 


G. 

G. 410-1100, 

$39.95. 

Interfan Blower, 

PMB24-115-4B, 

110 VAC, 

4 3 /4Wx4 3 /4Hx1 1 /4D 

inches.

Select MFJ hard-to-find Components for Repair/Homebrew Projects 

Precision DC Cross-Needle Meters 

Amplifier Power Supply Electrolytic Caps 

High capacitance, computer grade aluminum can electrolytic capacitors. Unique, two-meters-in-one Cross-Needle design makes these meters ideal for use in 

Long life, low ESR and can handle high ripple currents. Themal-Pak amps and SWR/Wattmeters. Rugged construction with removeable clear plastic cover. 

extended cathode foil construction assures cool operation. Great choice for Plug-in 12 VDC meter lamp, front panel “zero” adjustment. NEW! “L” models have 

high-capacitor amplfiier, power supply and energy storage application. 10- super bright LED backlight!!!! Raised window for recessed front panel mounting. 

32 screw terminals. 

Solder lug terminals for meter movement, lamp. Linear moving coil movement. 

Part No. # Price Value (uF) WVDC Ripple (I) Size (DxL) inches 

270-6210-7 $13.53 270 uF 450V 1.5A 1 

270-6380-7 $21.60 470 uF 450V 2.4A 

270-8270-2 $33.50 27000 uF 75V 9.0A 

3 /8x21 /8 

13 /8x31 /8 

2x45 /8 

Electrolytic Capacitors 

Can-type electrolytic capacitors ideal for amplifiers and power 

supply applications. 

They have 

snap-in PCB terminals. 

Part No. # 

270-6220-7B 

270-7100-5A 

270-8680-2 

Price 

$5.44 

$9.95 

$2.21 

Cap uF 

220 

1000 

6800 

WVDC 

400 V 

250 V 

50V 

RF Ceramic Doorknob Capacitors 

D x L (in.) 

1 3 /16x1 5 /8 

1 3 /8x2 

1 3 /16x2 

P/N: 290-0500-7, $22.25. 

P/N: 290-0170-7, $22.95. 

P/N 290-0500-7 is 500 pF, 20%, 7.5 kV. P/N: 290-0170-7 is 

170 pF, 20%, 7.5 kV. Both are HT50, RF Ceramic Doorknob 

Capacitors manufactured by High Energy. These RF transmitting 

capacitor are ideal for use in RF amplifiers. Threaded 

6-32 ends for easy connection. 3 /4” diameter x .625” long. 

High-Voltage Vacuum Relays 

These vacuum relays are 

ideal for amplifier QSK 

switches. Contacts are capable 

of carrying 10 Amps and 

break down voltage is 5 kV. 

A. 

Pre-wound 200 Watts and 1.5kW Baluns 

A. 


Figure 

A 

B 

C 

D 

A. B. C. D. 

Part No. # Price Sens./Resist./Size Scale Description 

400-3580L $26.80 1mA/120 Ohm 10-250 mA grid current & 0- 

LED Light 2.8Wx2.8Hx1.4D” 750 mA plate current 

400-3581L $26.80 1mA/120 Ohm 0-2.0 KW Fwd power, 0-500W 

LED Light 2.8Wx2.8Hx1.4D” ref power, 0-35 ALC/ HV, SWR 

400-3084A $21.60 200uA/750 Ohm 0-300W fwd power, 0-60W ref 

400-3084L $26.80 2.8Wx2.8Hx1.4D” power, SWR. 

LED Light 

“L”model is LED backlit. 

400-3083A $17.82 200uA/750 Ohm 0-300 fwd power, 0-60 ref 

400-3083Y $19.10 2.1Wx1.8x1.4D” power, SWR curves 

LED Light 

“Y” model is LED backlit. 

Miniature DC Panel Meters 

Quality, compact and inexpensive panel meters. Clear, removeable cover, raised window 

for recessed mounting. Solder lug terminals, moving coil movement. 100 uA 

movement, 750 Ohm resistance. Size is 1.6Wx1.6Hx1D inches. 

Power Relays 


A 400-0014A 

Price 

Scale Description 

$9.39 0-300 Pwr, 0-30 Pwr, SWR, red/black dual color 

scale, used in tuners and wattmeters 

Special relays designed for 

B 400-0035 $6.84 SWR, red/black scale used in analyzers 

amplifier TR switching, 

C 400-0047 $6.84 0-400 Ohm resistance, red/black scale used in analyzers 

in-rush current protection 

D 400-0027 $7.92 -20+3dB, 0-100% VU modulation scale, red/black 

and other high current 

dual color for line audio monitor 

applications. 

E 400-0090 $7.92 0-25 DC Volts, red/black scale for DC volt monitors 

A. B. C. 

F 400-0026A $7.92 0-100 general purpose scale 

Fig. Part No. # Price Coil Volts Contacts/Rating Description 

A 408-6140 $20.34 12 VDC 3PDT -- 10A PCB terminals, 80B/600/500 T/R 

A 408-6148 $15.30 12 VAC 5PDT -- 10A Solder lugs, In-Rush, 80B/600 Rugged construction with removeable clear plastic cover. Built-in 12 VDC lamp, front 

A 408-6240 $18.24 240 VDC SPST -- 10A PCB terminals, amplifier in-rush panel “zero” adjustment. Raised window for recessed front panel mounting. Solder lug 

A 408-6145 $15.54 120 VDC SPDT -- 10A PCB terminals, amplifier in-rush terminals for meter movement/lamp. Linear moving coil movement. 2.7Wx2.7Hx1.4D” 

A 408-6077 $15.99 120 VAC SPDT -- 10A Solder lugs, stub mount, general 

purposes P&B KA5AG 

B 408-4700 $17.64 12 VDC SPDT -- 15A Chassis mount, QC terminals, in-rush 

C 408-7110 $15.75 12 VDC DPDT -- 20A QC Terminals, dust cover, flange 

mount, Sigma 45R2C112-12 VDC 

C 408-6230 $12.95 24 VDC 3 PDT -- 10A Midtex relays 157-33C200, silver contacts, 

.187” quick connect terminals 

965-6204, $3.00. Plastic tuning stick for adjusting slug cores. Has .1 inch 

hex end, 7 

Figure Part No. # Price Sensitivity/Resistance Scale Description 

A 400-2600A $16.92 1mA/120 Ohm 0-200 mA Grid Current 

BC 400-2601A $16.92 1mA/120 Ohm 0-2.0 kV plate V, 0-750 mA plate I 

400-2026 $16.92 1mA/120 Ohm 0-100 general purpose scale 

D 355-0320 $1.80 

E 730-2342 $1.50 

each 

1 B. 

A. 408-8100, $19.95. Kilovac S05FJA238, DPST-NO, contact form, 2A, 

5kV rating between contacts, current is 10A DC or 5A RF, 12 VDC coil 

voltage and 500 Ohm coil resistance. 

B. 408-8500, $14.95. Wabash 1017-20-1, DPST, one pole normally open, 

one pole normally closed. 12 VDC coil voltage. 

Slug Core Tuning Tool 

/4” long. Fits all Ameritron tube amplifier input coils. 

Precision mechanical Deluxe Turns Counter 

MFJ-TC12, $69.95. This Precision 

designed mechanical deluxe turns counter is 

for use with roller inductors, vacuum capacitors, 

air variable capacitors, etc. 

Precision 5-digit counter is enclosed in a 

Replacement bulb for 400-2XXX meters, above. 

Replacement battery holder for MFJ-259/B. Holds 

four AA batteries. Requires two per analyzer. 

Ferrite and Iron Powder 

Toroidal Cores 

dust-free plastic casing. Counts to 9999.9 

turns. Counter is coupled to a 1/4” shaft at 

right angles with bevel gears. 

1/8 inch thick aluminum mounting plate is 

coated with texture powder paint. 

Has #4 counter sink mounting holes. Mount 

in 1x3” cutout hole. Unit is 2 

Get RFI out of television, telephone and 

other electronic devices. 

Use for baluns, chokes, RF coils, transformers, 

filters and more. 

1 /4Wx31 /2H in. 

Assembly includes 1/4 inch shaft coupler and a 13 A. B. C. D. E. F. 

Precision DC Panel Meters 

A. B. C. D. E. 

/4” fast-turned crank knob. 

A. 10-10002B, $9.95. Bifiliar wound balun, 1” 

diameter, ferrite toroid core, 200 Watts, 1.8-30 

MHz. Used in 200/300 Watts antenna tuners. 

B. 10-10989D, $29.95. Bifiliar wound balun, 2-stack 

2 1 /2” ferrite toroid cores wound with high-voltage 

wire. 1.5 kW, 1.8-30 MHz. Used in MFJ-989D tuner. B. 

LED/Incandescent Replacement Light Bulbs 

A. B. C. 

Part No. # 

420-6102 

420-6103 

420-6114 

420-7510 

420-6138 

421-02037 

421-02050 

421-02068 

421-02094 

421-02106 

421-02157 

421-02200 

420-7800 

Figure 

A 

B 

C 

Price 

.33 

.72 

$1.08 

$2.80 

$10.23 

.40 

.80 

.98 

$1.08 

$1.36 

$3.32 

$6.96 

$1.86 

Part # Price 

Description 

355-2299 $1.80 Incandescent replacement bulb for small and 

large Cross-Needle Meters, (2.1”W or 2.8”W) 

355-3200 $3.99 LED light replacement for large (2.8”W) 

Cross-Needle Meter 

355-3201 $3.99 LED light replacement for small (2.1”W) XMeter 

Size: ODxIDxTH inches 

.375x.187x.125 

.500x.281x.188 

1.00x.610x.320 

1.00x.610x.320 

2.40x1.40x.500 

.375x.205x.128 

.5x.303x.90 

.69x.370x.190 

.942x.560x.312 

1.00x.57x.437 

1.57x.950x.570 

2x1.25x.530 

1.00x.50x.410 

Description 

#61 Ferrite 

#61 Ferrite 

#61 Ferrite 

#75 Ferrite 

#61 Ferrite 

T-37-2 Iron Powder Mix 2 







Iron Powder Mix 2

A1 

Fig. 

A1 

B1 

A 

B 

C 

D 

E 

F 

G 

H 

I 

J 

K 

L 

M 

Fig. 

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

10 

11 

12 

13 

14 

Select MFJ hard-to-find Connectors, Plugs, Adaptors... 

B1 

V G 

Y X 

U 

Part No. 
















Part No. 










MFJ-7741 






Price 

Description 

$6.95 ea. New! N Male Reverse to N Female Adaptor 

$6.95 ea. New! 3/8-24 Female Coupler, 1 

$5.95 ea. 

$5.95 ea. 

$5.95 ea. 

$3.95 ea. 

$7.95 ea 

$6.95 ea 

$4.95 ea 

$3.95 ea. 

$5.95 ea. 

$5.95 ea. 

$5.95 ea. 

$5.95 ea. 

$4.95 ea. 

1 /4 inch length 

N-Male to SO-239 Adaptor 

N-Male to SMA Female Adaptor 

N-Male to BNC Female Adaptor 

PL-259 to PL-259 Adaptor 

PL-259 to BNC Female, Right Angle Adaptor 

PL-259 to “T” SO-239 (2) Adaptor 

PL-259 Right Angle Adaptor 

PL-259 to RCA Phono Jack 

PL-259 to SMA Female Adaptor 

PL-259 to SMA Male Adaptor 

PL-259 to BNC Female Adaptor 

F Female to F Female Coupler, 1.75” length 

SO-239 to SO-239 Coupler, 1.75” long. 

Price 

Description 

$6.95 ea. NMO to 3/8x24 threaded Adaptor 

$16.95 ea. 3/8-24 to PL-259 Adaptor 

$6.95 ea. 3/8x24 Antenna Mount Quick Connect Adaptor 

$11.95 ea. 3/8x24 Antenna Mount Fold-Over Adaptor 

$4.95 ea. 3/8x24 Chassis Mount with insulating washer 

$5.95 ea. SO-239 to 3/8x24 Male or Female adaptor 

$4.95 ea. 3/8x24 to .10 inch hole whip ferrules 

$4.95 ea. 3/8x24 to .20 inch hole whip ferrules 

$1.95 ea. PL-259, Teflon 

.55 ea. 

.55 ea. 

$1.49 ea. 

$1.49 ea. 

$1.95 ea. 

$1.95 ea. 

(R) , nickel plated 

Coax Reducer for RG-58 

Coax Reducer for RG-8X 

SO-239 4-hole Chassis Mount TeflonTM SO-239 screw-on Protector cover 

N-Female 4-Hole Chassis Mount, TeflonTM SO-239 Single Hole Mount, TeflonR PAYMENT INFORMATION / SALES TAX 

Personal checks will be held 10 working days upon receipt of order. FOREIGN ORDERS: US Funds ONLY. See ship chart for details. 

Write for quote. Credit Cards: We accept Mastercard, Visa, American Express and Discover, government and debit cards. Please write 

your CC#, expiration date, three-digit security CVV2 code on the back of your card and other information clearly or call 1-800-647-1800; 

advise if billing address for said card is different than address above. C.O.D. Fee: Add additional $9.00 for sending products C.O.D., above 

and beyond normal shipping charges. Bank Transfer: Wire transfers should be directed to: Regions Bank, Birmingham, Alabama, ABA: 

062000019, SWIFT: UPNBUS44; For further credit to: Regions Bank, Starkville, Mississippi; For Account of: MFJ Enterprises, Inc., 

Account Number: 0080558542. Add bank fee of $25.00 for each $500 amount. Sales Tax: Mississippi, Florida and Ohio must add sales tax 

from countythey reside in. Prices and specifications subject to change without notice or obligation. MFJ will not be held responsible for printing errors. 

NO RISK ORDERING 

NO RISK ORDERING: Order any product “directly” from MFJ 

Enterprises, Inc., Starkville, MS and try it for 30 days. If not satisfied, we’ll 

cheerfully refund your purchase price (less shipping). No books or software. 

MFJ WARRANTY 

H J 

A B C D E F I 

9 26 

WARRANTY INFORMATION: All MFJ products (except as noted) 

come with MFJ’s famous No Matter What TM one year limited warranty. 

The warranty does not include kits, books or software. MFJ will repair 

or replace (at our option) your MFJ product No Matter What TM for one 

complete year. Customer MUST retain dated proof-of-purchase. 

REPAIRS / TECH SUPPORT 

REPAIRS/TECH Support: Send unit with copy of purchase receipt to 

MFJ Enterprises, Inc., 300 Industrial Park Road, Starkville, MS 39759. 

TECH: (662)323-0549 • E-Mail: mfjcustserv@mfjenterprises.com 

K 

Fig. 

C1 

D1 

N 

O 

P 

Q 

R 

S 

T 

U 

V 

W 

X 

Y 

Z 

11 13 15 

M W N O P Q R S T 

Fig. 

15 

16 

17 

18 

19 

20 

21 

22 

23 

24 

25 

26 

27 

Part No. 
















Part No. 






MFJ-7700P 

606-0014 

606-0013 

606-0004 

606-0003 

606-1006 


MFJ-11C06 

*Code F items cannot be sent by USPS/mail. Foreign orders must call for quote. 

Ship Code 

A 

B 

C 

D 

E 

F 

Price 

Description 

$7.95 ea. New! Nx3 Female T Coupler 

$6.95 ea. New! SO-239x3 T Coupler 

$4.95 ea. SO-239 to SMA Male Adaptor 

$4.95 ea. SO-239 to SMA Female Adaptor 

$3.95 ea. SO-239 to BNC Male Adaptor 

$4.95 ea. BNC Male to SMA Female Adaptor 

$4.95 ea. BNC Male to SMA Male Adaptor 

$4.95 ea. BNC Female to SMA Male Adaptor 

$4.95 ea. BNC Female to SMA Female Adaptor 

$6.95 ea. NMO to SO-239 Adaptor 

$5.95 ea. SO-239 to RCA Male or Motorola made plug 

$5.95 ea. N-female to N-female Barrel Coupler, 1.75” long. 

$4.95 ea. SMA Female to SMA Female Coupler, 5/8” length 

$3.95 ea. SO-239 to SO-239 Coupler, 1 inch length. 

$5.95 ea. Right Angle N Male to N female Adaptor 

1 2 3 4 5 6 7 8 10 12 14 16 17 18 19 20 27 

L 

Price 

Description 

$1.49 ea. BNC Female, Chassis Mount 

$2.49 ea. N-Female Single hole Mount, Teflon 

$7.95 ea. 

$6.95 ea. 

$5.95 ea. 

$6.95 pk. 

$2.50 ea. 

$2.50 ea. 

1.25 ea. 

1.25 ea. 

$3.95 ea. 

$0.99 ea. 

$6.95 ea. 

TM 

BNC to dual Binding Posts 

Dual Banana Plugs, High Current 

1 Red, 1 Black High Current Banana Plugs 

6 Red, 6 Black Banana Plugs / Pack 

5-Way Binding Post, Black, 30 Amps, insulated 

5-Way Binding Post, Red, 30A, insulated 

5-Way Binding Post, Black 

5-Way Binding Post, Red 

Feed-through Ceramic Insulator with hardware 

Black PVC Protect Cap for SO-239 w/retaining strap 

35A Anderson PowerPolesTM (6prs) Pg. 29, more info 

UPS / MAIL SHIPPING CHART 

UPS 

$12.00 

14.00 

16.00 

18.00 

21.00 

30.00 

USPS/MAIL 

$12.00 

20.00 

25.00 

30.00 

35.00 

* 

21 22 23 24 25 

Canada 

$25.00 

30.00 

35.00 

40.00 

50.00 

55.00 

Foreign 

$100.00 

150.00 

200.00 

250.00 

300.00 

* 

All packages 1 lb. and under will be shipped by US MAIL for $12.00 

minimum charge unless otherwise specified. 

Shipping Charges: We ship via best ground method at a 

flat rate shown above. For faster service, call for quote. We 

can ship United parcel Service, Priority Mail, Federal 

Express, Airborne, DHL, etc. 1-800-647-1800. Please follow 

the shipping chart shown above; any excess shipping 

charges calculated will be refunded to you upon your order 

being received. Catalog #080712. (c) MFJ, 2013. 


C1 

D1 

Z

MFJ 2.4 GHz WiFi Antennas 

MFJ 2.4 GHz, 15 dBi, 

16-element WiFi Yagi Antenna 

15 dB, 16- Unique mount has builtelement 

WiFi in standard N-type female 

Yagi antenna connector and screw mount 

greatly extends for standard tripod. 

range of 802.11b/g WiFi Has rear holes for wall 

signals 32 times over an mounting and bottom holes 

isotopic radiator. 

for desk or shelf mounting. 

Turns unusable or slow Use it vertically or hori- 

WiFi into solid, fast conneczontally. Precision 

tion. Highly directional -- punched aluminum antenna 

minimizes interfering sig- measures just 18Wx 2 

nals. Works with any 

802.11b/g or 2.4 GHz device. 

3 /4H 

x11 MFJ-1800 

$ 95 29 

Ship Code A 

/4D inches, weighs only 

2.9 ounces. 

Weather-proof 2.4 GHz, 15 dBi Yagi 


(see above) 2.4 

GHz, 15 dBi, 16 

element WiFi 

Yagi antenna is 

housed in a good 

looking, ruggedized weather-proofed enclosure. MFJ-1801 

withstands harsh weather -- wind, thunderstorms, ice, sleet, 

snow, high heat and humidity. Mounts indoor or outdoor 

on any mast up to 11 /4” OD. N connector. Compact 

20Wx31 /2Dx31 /2H inches, weighs just 21 MFJ-1801 

$ 95 69 

Ship Code A 

/2 lbs. 

------------------------------------------------------------------------- 

MFJ Order Form 

High gain, Wide Area 2.4 GHz WiFi Antennas 


$ 49 95 

Ship Code A 

Extends range and coverage of 

wireless routers and access points 

by providing focused signals. 

Place one of these high gain, 

wide coverage directional antennas 

in an upper corner of a large area 

or on the ceiling and drive strong 

signals into distant corners and 

hard-to-reach places -- large rooms, 

houses, offices, stores, warehouses. 

Gives faster speed by reducing 

re-transmissions due to weak-signals. 

2 dBi Dipole Antenna 


Replacement for wireless 

access points, routers, 

adapters. Mount on base and 

place high in open for extended 

range. Swivels for maximum 

signal pickup. 5 1 /2 in. 

Reverse SMA male connector. 

Ship Code A. 


$ 59 95 

Ship Code 

Mail order to: MFJ Enterprises, Inc., 300 Industrial Park Road, Starkville, MS 39759 USA 

Phone: 662-323-5869 Fax: 662-323-6551 Email: mfjoffice@mfjenterprises.com Web: www.mfjenterprises.com 

Date: ____________________ Callsign: _______________ Name: ___________________________________________ 

Bill to: 

Name: ___________________________________________ Address: _________________________________________ 

Address: _________________________________________ _________________________________________________ 

_________________________________________________ _________________________________________________ 

Email Address: ____________________________________ Payment: ( ) Visa ( ) MC ( ) Am Exp ( ) Disc ( ) Other__ 

Phone (home): ____________________________________ Card No: _________________________________________ 

Phone (day): ______________________________________ 

Ship to: 

Exp. Date: _________ Three-Digit Security Code: _______ 

Qty Company Model No. / Part No. Description 

Price Total 

Sales tax where applicable (MS, OH, FL must be added) 

Sub Total 

Shipping & Handling 

Order Total 


Swivel mount style. Female Ntype 

connector. 

MFJ-1802 full-size air dielectric 

patch antenna provides 8 dBi 

gain. Extra-wide 150 degree beamwidth, 

just point in general direction. 

MFJ-1804 bi-quad antenna gives 

you 12 dBi gain and 45 degree beamwidth 

when you need extra high 

gain and a more focused signal. 

Covered by MFJ one year No 

Matter What TM limited Warranty. 

WiFi Antenna-to- 

Computer Cable 

MFJ-5606SR, $24.95. 

Connects MFJ-1800 and 

other WiFi antennas to computer, 

reverse SMA male to Nmale, 

6 ft. RG-174. 

MFJ-5606TR, $24.95. Same 

as MFJ-5606SR but reverse 

TNC male to N-male. Ship A

2013 Amateur Radio Catalog 

High Power Vacuum Tube Amplifiers, 600 Watts to Legal Limit! 

AL-811, $799 

600 Watts . . . Page 88 

AL-572, $1795 

1300 Watts . . . Page 91 

AL-811H, $949 

800 Watts . . . Page 89 

AL-800H, $3895 

1500 Watts . . . Page 91 

AL-80B, $1495 

AL-1500, $3795 

1500 Watts . . . Page 92 

Solid State No Tune Amplifiers, 500 Watts to 1200 Watts! 

ALS-500M, $899 

500 Watt Mobile . . . Page 95 

ALS-600, 

$1499 

600 Watts 

Page 94 

ALS-1300, $2899 

1200 Watts . . . Page 93 

High Power Accessories for Your High Power Station! 

Remote Switches SWR/Wattmeters Antenna Tuners Dummy Loads Power Supplies 

Page 

101 

Page 93 

Page 100 

Page 100 

1000Watts...Page90 

Page 95 

. . . the World’s High Power Leader! 

www.ameritron.com 87

AL-811 . . . 600 WATTS . . . $799! 

More hams use Ameritron AL-811 amplifiers than any other amplifier in the world 

. . . The AL-811 has earned a worldwide reputation for legendary quality, 

flawless performance, proven reliability and superb customer service . . . 

Ameritron’s AL-811 linear 

amplifier gives you plenty of 

power to bust through QRM! 

You get a quiet desktop linear 

that’s so compact it’ll slide 

right into your operating position 

-- you’ll hardly know it’s 

there . . . until QRM sets in. And 

you can conveniently plug it 

into your nearest 120 VAC outlet 

-- no special wiring needed. 

You get three tough 811A 

transmitting tubes, extra heavy 

duty power supply, all HF band 

coverage, pressurized ventilation, 

tuned input, dual illuminated 

meters, adjustable ALC and much 

more for an incredible $799! 

The First 600 Watts 

makes the difference 

The AL-811 gives you 600 

Watts PEP output -- that’s nearly 

2 full S-units over your barefoot 

rig. That could mean the 

difference between hearing, 

“You’re Q-5 armchair copy” 

and “Sorry, can’t copy you, too 

much QRM.” 

Now you won’t have to 

stand aside while the big guns 

steal your DX. You’ll log some 

of those stations first. 

All band, all mode Coverage 

AL-811 covers all HF 

bands. No compromise on 

WARC and most MARS bands 

-- you get a 100% rated output. 

Operate AL-811 on all 

modes. Get 600 Watts output 

PEP SSB and 500 Watts output 

CW. You even get 300 Watts 

on continuous carrier modes 

like RTTY, SSTV, and FM. 

The low cost 811A tubes 

resists failure because . . . 

First, they’re constructed with 

widely spaced elements that 

minimize the chance of elements 

touching and causing a 

short -- even if the plate gets 

hot enough to melt. 

Second, they use a directly 

heated thoriated 

tungsten filament 

cathode that prevents 

the electron 

emitting 

layer from 

instantly stripping off -- even if 

mistuning causes a sudden, 

severe current overload. 

The Ameritron AL-811 is 

excellent for the newcomer 

AL-811 

$ 799 

Suggested Retail 

because it’s tough enough to 

withstand momentary mistuning. 

And the tubes are so inexpensive 

that you can replace 

one for mere pocket change. 

Extra heavy duty power supply 

gives you peak performance 

year after year 

The heart of the AL-811 

power supply is its heavy duty 

power transformer with a high 

silicon steel core weighing a 

hefty 17 pounds. 

A full wave bridge using 

67.5 mfd of total capacitance 

(four 270 ufd, 450 volt capacitors) 

produces 1500 Volts under 

full load and 1700 Volts no 

load. That’s excellent 

high voltage regulation! 

Rectifier diodes are 

rated for a massive surge 

current of 200 amps-won’t 

blow even if you 

accidentally short the 

high voltage supply. 

Wire wound, 7 Watt, 

50 K Ohm equalizing 

resistors safely protect 

each filter capacitor -- not 

2 Watt, 100 K Ohm carbon 

composition resistors 

that can open and cause 

filter capacitors to 

explode or fail. 

Ameritron’s AL-811 

power supply is built 

tough so you get peak 

performance year after 

year. 

Tuned input provides 

excellent load for any rig 

A Pi-Network tuned input 

provides a 50 Ohm load for 

your rig. Even fussy solid state 

rigs can deliver their full drive 

to the AL-811. 

An 

Inside 

view 

of the 

AL-811 

Low loss slug tuned coils -tunable 

from the rear panel -let 

you optimize performance. 

High quality low drift silver 

mica capacitors maintain proper 

tuning. Output tank: 

Optimum Q on each band 

The low loss pi-network 

output tank has been carefully 

designed for optimum Q on 

each band and built with top 

quality RF components. 

The result is peak performance 

over each band, wide 

impedance matching range and 

exceptionally smooth tuning 

88 AMERITRON...the world’s high power leader! 

with efficiencies close to 70%. 

Even a 3:1 SWR load won’t 

damage tubes/tank components. 

A ball bearing vernier 

reduction drive makes plate 

tuning safe, precise and easy. 

A quiet blower pressurizes 

the cabinet with a large volume 

of air flow. It keeps the 811A 

tube temperature well below the 

tube manufacturer’s rating -even 

with a key down carrier at 

400 Watts output -- without the 

overwhelming noise of oversized 

fans. 

Two illuminated meters 

Two illuminated meters 

give you a clear picture of your 

AL-811 operating conditions so 

you can tell right away if something 

is wrong. 

The Grid Current meter 

continuously checks for 

improper loading. The other 

meter switches be-tween high 

voltage and plate current to 

warn of abnormal conditions. 

Exclusive Adapt-A-Volt TM 

power transformer 

Too high of line voltage 

stresses components and causes 

them to wear out and fail. Too 

low line voltage causes a “soft 

tube” effect -- low output and 

signal distortion. 

Ameritron’s exclusive 

Adapt-A-Volt TM power transformer 

has a special buck-boost 

winding that lets you compensate 

for stressful high line voltage 

and performance robbing 

low line voltage. Your components 

last longer and gives you 

peak performance -- regardless 

of your line voltage. 

Plus much, much more . . . 

An Operate/Standby switch 

lets you run barefoot, but you 

can in-stantly switch to full 

power if needed. A transmit 

LED tells you when your rig is 

keying your AL-811. A 12 

VDC keying relay makes it 

compatible with all solid state 

and tube rigs. 

Back-pulse cancelling diode 

protects the rig keying circuit. 

Shielded RF compartment. 

One year limited warranty. 

Compact 16Dx13 3 /4Wx8 H”. 

30 lbs. UPS shippable, has 

transformer installed and wired 

for 120 VAC. Draws 8 amps at 

120 VAC. Export model is AL- 

811X wired for 240 VAC. 

AMERITRON 

116 Willow Road, Starkville, MS 39759 

Tech: 662-323-8211•Fax: 662-323-6551 

www.ameritron.com

800 WATTS OUT . . . $ AL-811H 

949! 

AL-811H 

$ 949 


Only the AMER- 

ITRON AL-811H 

gives you four fully 

neutralized 811A transmitting 

tubes. You get 

absolute stability and 

superb performance on higher bands that 

can’t be matched by un-neutralized tubes. 

AMERITRON mounts the 811A tubes 

vertically -- not horizontally -- to prevent 

hot tube elements from sagging and shorting 

out. Others, using potentially damaging 

horizontal mounting, require hard-tofind 

811A tubes to retard harmful sagging 

and shorting. 

Powerful 20 CFM computer grade fan -not 

an open frame phonograph motor -draws 

in cool air to pressurize the cabinet 

and efficiently cool your 811A tubes for an 

extra long life. 

You also get efficient full-size heavy 

duty tank coils, computer grade capacitors, 

heavy duty high silicon core power transformer, 

slug tuned input coils, 

operate/standby switch, transmit LED, 

ALC, dual meters, QSK compatibility with 

QSK-5 option and much more! 


• Output power: 800 Watts PEP, 600 

Watts CW. 

• All Band Operation: Covers 160-15 

Meters including WARC bands. Can be 

user modified for 12 and 10 Meters. 

• Four 811A Tubes: Uses four rugged, 

fully neutralized low cost 811A PA tubes. 

• Vertical Tube Mounting: Prevents shorting 

of tube filament/grid, prolongs tube life. 

• Fully Neutralized: 

Improves stability and performance on 

higher bands. 

• Input Tune Circuit: Adjustable rear 

panel slug tuned input circuit. 

• ALC Control: Built-in adjustable ALC 

control. 

• Vernier Reduction Drives: Tuning and 

loading reduction drives make tuning 

smooth and easy. 

• Dual Illuminated Meters: Monitor vital 

operating functions. 

• Heavy Duty Power Supply: 17 pounds, 

high silicone steel core transformer and 

computer grade filter capacitor gives 1700 

Volts high voltage at no load and 1500 

Volts at full load. 

Multi-Voltage Operation: User selectable 

for 100/110/120/210/220/230 VAC operation. 

Shipped with transformer installed 

and wired for 120 VAC for domestic model 

or 240 VAC for export model. 

• Air-Cooled: Quiet pressurized ventilation 

keeps tubes safely cooled. 

QSK Compatible: Optional external electronic 

pin diode Transmit/Receive switch. 

QSK-5, $359.95. See page 96 for details. 

• Attractive Lexan front decal 

• One Year AMERITRON warranty. 

• Dimensions: 8 1 /4Hx13 3 /4Wx15 1 /2D inches. 

• Operating Weight: 32 lbs. • Made in USA 

A look inside AMERITRON’s AL-811H 

Pi-Network Tuned input 

provides 50 Ohm 

load for your rig. 

Four fully neutralized and 

rugged 811A transmitting 

tubes vertically 

mounted. 

Output tank circuit with 

optimum “Q” 

for each band 

New! Get the AL-811HD 

with 572B tubes . . . $1249 

AL-811HD gives you the AL-811H with 

four 572B tubes installed. Get a higher 

power tank circuit and grid overload protection. 

Grid Overload Protection protects the 

tubes from excessive grid current due to mistuning 

and it protects against excessive drive 

power. Four 572B tubes give you more plate 

dissipation than a single 3-500Z tube. AL- 

811HD gives you 800 Watts output in SSB 

and 600 Watts for continuous duty in CW, 

RTTY, SSTV and AM operation. 

Heavy duty power supply: 

17 lb. high silicone 

steel transformer and 

computer grade capacitors. 

Heavy duty band switch 

Pi-network gives smooth 

tuning and excellent 

harmonic suppression. 


AMERITRON Doubles Average SSB Power 

AL-80B kilowatt output desktop linear can double your average SSB power output with high-level 

RF processing...runs cooler because its 3-500 tube completely turns off between words 

Ameritron’s AL-80B 

kilowatt output desktop 

linear can double your 

average SSB power output 

with high-level RF 

processing using 

AL-80B 

$ 1495 

Suggested 

Retail 

Ameritron’s exclusive Dynamic ALC TM . 

You get cooler operation because the 

AL-80B’s exclusive Instantaneous RF 

Bias TM completely turns off the classic 3- 

500 tube between words. It saves hundreds 

of watts wasted as heat. 

You get a full kilowatt PEP output 

from a whisper quiet desktop linear. It’s 

a compact 8 1 /2Hx14Dx15 1 /2 inches and 

plugs into your nearest 120 VAC outlet. 

Covers all bands 160-15 Meters, including 

WARC and MARS (10/12 Meters 

modifiable; FCC license required). 

You get 800 watts output on CW, 500 watts 

output on RTTY, an extra heavy duty power 

supply, genuine 3-500 tube, nearly 70% efficiency, 

tuned input, Pi/Pi-L output, inrush current 

protection, multi-voltage transformer, dual 

cross-needle meters, QSK compatability, twoyear 

warranty, made in the USA, plus much 

more! 

Dynamic ALC TM doubles average SSB power 

The AL-80B’s exclusive Dynamic ALC TM 

gives you high-level low-distortion RF processing. 

It can more than double your average 

SSB power for up to 6 dB improvement in 

intelligibility, maximizing talk power without 

distortion/splatter. 

A convenient front panel control lets you 

adjust output power level. 

The AL-80B’s exclusive Instantaneous RF 

Bias TM turns off the classic 3-500 tube (except 

filaments) between words and dots and dashes, 

elininating hundreds of watts wasted as heat 

for cooler operation and longer component life. 

The guts of the AL-80B is its heavy duty 

power supply. A 26 pound transformer using a 

high silicone steel core, computer grade capacitors, 

heavy duty bleeders and ten 3 amp, 1000 

volt power rectifiers give you a stiff 2700 volts 

fully loaded. Many amps using two 3-500s use 

such small power supplies they don’t deliver 

much more power output than the AL-80B. 

The AL-80B is built on a rugged steel 

chassis with a separate fully-shielded RF compartment 

to minimize RFI and TVI. 

A whisper quiet internal fan draws in cool 

air over power supply components and pressurizes 

the classic 3-500 tube compartment to 

remove heat for longest life. 

Tuned input lets your rig deliver full output 

50 Ohm broadband Pi-Network tuned input 

is used. Even fussy solid state transmitters 

will deliver full power! 

A carefully designed Pi/Pi-L output network 

using the optimum Q for each band gives 

exceptionally smooth tuning, extremely wide 

matching range, full band coverage, and peak 

90 www.ameritron.com • Toll-free 1-800-713-3550 

performance at all power levels. 

Step-Start Inrush 

Protection TM stops damaging 

inrush current with a start up 

sequence that’s easy on your 

tube and power supply components. 

Our exclusive Multi-Voltage 

Power Transformer TM lets you 

optimize for 14 different primary 

line voltages. The high 

voltage secondary can be wired 

to reduce plate voltage for efficient 

operation below 400 watts 

for use outside the USA. 

AMERITRON’s dual LED 

illuminated cross-needle meters 

give you four separate meters to 

monitor your operating conditions -- you can 

tell right away if something is wrong. Grid and 

plate current and forward output power are 

monitored for improper loading and abnormal 

conditions. 

The fourth meter can be switched to monitor 

your 3-500 tube DC plate voltage, reflected 

PEP power, antenna system SWR, ALC voltage 

to your rig, and the grid current that starts 

ALC action -- get a clear picture of your AL- 

80B. 

The T/R (transmit/ receive) relay in the 

AL-80B switches nearly as fast as some vacuum 

relay QSK T/R switches. 

Operate/Standby switch lets you run barefoot, 

but can instantly switch to full power if 

needed. 

Has transmit LED; 12 VDC, 200 mA 

accessory jack; 12 VDC keying relay for solid 

state and tube rigs; tough Lexan over-aluminum 

front panel. Two-year waranty. 

Weighs 48 lb. Power required: 120 VAC, 

12A. Made in the U.S.A. 

An inside look at AMERITRON’S AL-80B 

Dual LED illuminated cross-needle meters 

give you four separate indicators that monitor 

your operating conditions -- PEP forward 

power, PEP reflected power, SWR, Grid 

Current, Plate Current, Plate Voltage 

and ALC. 

Heavy Duty 

Bandswitch. 

Tank coils spaced 

away 

from chassis for 

optimum “Q”. 

Pi-Network gives smooth 

tuning and full band 

coverage, even on 

160 and 80 Meters. 


Frequency Coverage: 1.8, 3.5,7, 14, 21 MHz and WARC bands. 

Export/User modified models include 10/12 Meters. 

Input Circuit: Adjustable Pi-Network, VSWR 1.3:1 or less at resonance. 

Output Circuit: Pi-L/Pi-Network. 

Input Bandwidth: 20% for 2:1 VSWR or better. 

Heavy duty power supply: 

26 lb. high silicone 

steel transformer and 

computer grade 

capacitors. 

Drive Requirement: 85 Watts for 800 Watt CW output. 

10 dB gain. 

Shipping Weight: Amplifier, 54 lbs.; tube, 3 lb. 

Operating Weight: 48 pounds. 

Efficiency: CW/SSB better than 66%. 

Dimensions: 15 1 /4Dx14Wx8 1 /2H inches. 

Rear panel 

adjustable input 

Pi-Network. 

Genuine 

classic 

3-500 Tube. 

AMERITRON’S AL-80B Kilowatt Desktop Linear

AMERITRON’S four 572B tubes . . . 1300 Watts . . . $1795! 

AMERITRON creates a new class of Near Legal LimitTM amplifiers with the AL-572 . . . 

you get nearly full legal SSB power output for 65% of the price of a full legal limit amplifier . . . 

You get 1300 Watts PEP SSB nominal 

power out on amateur bands 160 through 

15 Meters! 

Four rugged 572B tubes give you near 

legal limit power and instant 3-second 

warm-up time. 

This whisper quiet, desktop linear 

plugs into your nearest 120 VAC outlet -no 

special wiring needed. 

You get . . . Ameritron’s exclusive 

Instantaneous RF Bias TM , Dynamic 

ALC TM , ParasiticKiller TM , Step-Start TM 

Inrush Protection, heavy duty power supply, 

fully neutralized tubes, Pi/Pi-L network, 

tuned input, pressurized ventilation, 

dual LED lighted Cross-Needle meters, 

multi-voltage power transformer, front 

panel ALC control, 6:1 vernier reduction 

drives, and much more! 

The AMERITRON AL-572 gives you 

1300 Watts PEP SSB nominal power output 

on 160 through 15 Meters, using four 

rugged 572B tubes with 3 second warm-up 

time. This whisper quiet, desktop linear 

plugs into your 120 VAC outlet - no spe- 

cial wiring needed. 

You get heavy duty 

power supply; fully neutralized 

tubes; pressurized venti- 

lation; multi-voltage power transformer; 

front panel ALC control; 6:1 vernier drives 

... and more! 

You'll typically get 1300 Watts PEP 

SSB, 1000 Watts CW continuous, on all 

amateur bands from 160 through 15 Meters 

AMERITRON's exclusive 

Instantaneous RF Bias TM completely turns 

off the 572B tubes between words and dots 

and dashes, for cooler operation and longer 

component life, while Dynamic ALC TM can 

more than double your average SSB power. 

AMERITRON's Step-Start TM Inrush 

Protection limits inrush current to your 

power supply and tube filament, greatly 

extending tube life and amplifier components. 

A heavy duty power supply using a 

high silicon steel transformer delivers 2500 

Volts at 0.7 Amps with good regulation. 

A Pi-Network tuned input using slug 

tuned coils provides a good 50 ohm load 

for your rig. A quiet internal fan draws in 

cool air over power supply components and 

pressurizes the tube compartment. 

Grid current, plate current and forward 

PEP output power are continuously monitored 

by dual, lighted cross-needle meters. 

A fourth scale switches among peak 

reflected power (and SWR), high voltage, 

ALC threshold, and ALC output voltage. 

at 240 VAC and weighs just 51 lbs. 

For more power and headroom, the AL- 

800H uses a pair of 3CX800A7 tubes to 

easily provide 1500 Watts PEP/CW with a 

typical drive level of just 55 Watts. 

The AL-800H draws 14 Amps peak current 

at 240 VAC (1500 Watts CW output) 

and weighs just 52 lbs. 

Other than power differences, these 

amplifiers are very similar in features and 

operation. Both cover 160-15 Meters, and 

are modifiable to cover 12/10 M with proof 

of your FCC license. 

Both include a Step-Start TM input power 

circuit, a time delay circuit to allow for tube 

warm-up, thermal overload protection, grid 

current limiting to protect your tube(s), a 

DynamicBias TM circuit and a built-in multivoltage 

(14 user-selectable AC line voltages 

from 90-140; 200-250 VAC) heavy duty 

power transformer. Hefty 32 lb. grain orientated 

silicone steel core transformer. 

Front panel monitoring and tuning functions 

are also virtually identical. Both 

amplifiers include a Standby/Operate switch 

for barefoot or full power operation, an ALC 

SET control, Transmit and Fault LEDs. 

Dual LED illuminated Cross-Needle 

Ameritron’s multi-voltage power transformer 

has a unique buck-boost winding. 

It lets you select from 14 primary voltages 

centered on 115 and 230 VAC. 

You can match your AL-572 to your 

AC line voltage so you’ll get peak performance 

and long component life -- regardless 

of your line voltage. 

An Operate/Standby switch lets you run 

barefoot, but you can instantly switch to 

full power if you need it. Transmit LED: 

12 VDC. 200 mA accessory jackp; 12 

VDC keying relay for solid state/tube rigs; 

tough, nearly indestructable Lexan-overaluminum 

front panel. Shipped with transformer 

installed. Draws 16 A at 120 VAC. 

For lightning fast QSK operation use 

the optional Ameritron electronic PIN 

diode QSK switch. Shipped wired for 120 

VAC. Weighs 40 lb. Power required: 120 

VAC, 16 amps. Made in the USA. 

AMERITRON AL-800/AL-800H HF Linear Amplifiers: 

High POWER in a Compact, Desktop Package 

Select the 1250 Watt PEP AL-800 single 3CX800A7 near-legal-limit amplifier, or the 1500 Watt PEP 

dual 3CX800A7 amplifier that loafs along at full legal limit -- and don’t worry about desk space. 

AL-800F Ameritron’s compact 

$ 1995 AL-800 /AL-800H amps 

Single Import tube are both desktop linears 

AL-800 with plenty of muscle! 

$ 2595 At 14.25Wx8.5H 

One Eimac x14.5D inches, the more 

compact AL-800 uses a 

single 3CX800A7 to provide 

1250 Watts PEP SSB 

and 850 Watts CW with 85 

Watts typical drive level. 

And the AL-800 will 

even run from a 20-Amp 

120 VAC line source if 

desired. AL-800 typically 

draws 17 Amps peak current 

at 120VAC, or 8 Amps 

(R) tube 

AL-800HF 

$ 2745 

Two Import tubes 

AL-800H 

$ 3895 

Two Eimac (R) 


tubes 

AL-572 

$ 1795 

Suggested 

Retail 

No one will ever know the difference! 

Inside 

view 

of 

AL-572 

meters provide detailed monitoring of 

amplifier performance. The left meter continuously 

measures grid and plate currents, 

and the right meter continuously measures 

peak RF output power on one scale, and 

plate voltage, Reflected power and SWR, 

ALC voltage, and ALC adjustment set. 

Quiet pressurized ventilation keeps tubes 

safely cooled. A Pi/Pi-L output network 

gives you smooth tuning and wide matching 

range. Vernier reduction drives make tuning 

and loading adjustments smooth and easy. 

Inside view of AL-800H 

www.ameritron.com • Toll-free 1-800-713-3550 91

AMERITRON super legal limit amplifiers 

These three rugged linears all use a super heavy 

duty Hypersil (R) power supply capable of 2500 Watts! 

Ameritron’s AL-1500 Amplifier with Eimac (R) 3CX1500A7 

AL-1500F 

$ 3295 

Import tube 


AL-1500 

$ 4195 

Eimac (R) tube 

Feel the need for maximum 

legal HF output 

power? AMERITRON’s 

AL-1500 will give it to you. 

Using the Herculean 

3CX1500A/ 8877 ceramic 

tube with its high power 

gain, the AL-1500 needs 

only 65 watts of drive from your exciter to 

deliver the goods-- transceivers and other 

exciters just loaf at 1500 watts out. 

Cool, efficient operation is provided by a 

forced-air system with tube chimney, using 

a commercial grade die-cast ball bearing 

blower for maximum tube life. The tube is 

further protected by time delay starting and 

automatic over-current shutoff to remove 

drive power if the amplifier is mis-tuned. 

You get full legal power output from a 

whisper quiet desktop linear. Measures 

18 1 /2D x17Wx10H inches, and covers all 

bands, 160-15 Meters, including WARC and 

MARS (80% of full output set to nearest 

amateur band). 10/12 Meters 

modifiable. 

You get 1500 watts output 

(1/2 hour continuous 

carrier) and 2500 watts 

(30 second continuous 

carrier and 2500 

watts- plus 30 

minute PEP twotone 

test). You get 

all this power, plus, 65% efficiency, pi-network 

tuned input, Pi/Pi-L output, inrush current 

protection, multi-voltage transformer, 

QSK compatability, and a one-year warranty. 

The guts of the AL-1500 is its heavy duty 

power supply, with a 32 lb. Hypersil (R) 

transformer using a high silicone steel core, 

computer grade capacitors (33 mfd total), 

heavy duty bleeders and twenty 3 amp, 

1000 volt power rectifiers give you a stiff 

3300 volts fully loaded. 

The AL-1500 is built on a rugged steel 

chassis with a separate RF compartment 

fully shielded to keep RF from leaking out, 

keeping RFI and TVI to a minimum. 

New LED Meters! 

An inside look at the AMERITRON AL-1500 

Superb RF design and layout, Hi-Q tank 

circuit and commercially rated RF power 

components give you 65% plate efficiency 

over the entire operating range. Power goes 

into the antenna instead of into heat. 

50-ohm broadband Pi-Network tuned input 

with slug-tuned coils is used. Even fussy 

solid state transmitters deliver full power! 

A carefully designed Pi/Pi-L output network 

using the optimum Q for each band 

with vernier ball drives gives smooth tuning, 

wide matching range, full band coverage, 

and peak performance at all power levels. 

The AL-1500’s grid overload circuit pro- 

92 www.ameritron.com • Toll-free 1-800-713-3550 

tects the tube from excessive grid current; if 

175 mA of peak gric current is reached, the 

“OPR” LED will no longer light and the 

amplifier will go into a bypass condition 

until reset by the operator. 

Transformer provides many options 

Since excessive line voltage stresses 

components (low line voltage causes a “soft 

tube” effect, for example), Ameritron’s 

exclusive Multi-Voltage Power 

Transformer TM lets you optimize for different 

line voltages. Select from 4 different primary 

voltage ranges, from 205-219 VAC to 252 to 

265 VAC. The amplifier comes wired from 

the factory for 240 VAC. 

The AL-1500 has two illuminated panel 

meters. Grid Current meter provides continuous 

reading of the critical grid current and 

indicates proper, safe amplifier operation. 

The other meter can be selected to read 

Plate Voltage, Plate Current, Peak RF 

Watts, or ALC. A SSB/CW selector switch 

chooses bias voltage for best linearity on 

SSB or lowest dissipation on CW. 

The Operate/Standby switch, in Standby, 

maintains the tube’s filament and plate voltages 

while allowing “barefoot” operation. 

Includes 12 volt DC auxiliary jack and 

an “XMT” LED to provide indication of 

proper amplifier keying by the exciter. 

Power required: 240 VAC, 15 amps. 

Frequency coverage: 

1.8,3.5,7,14, 21 MHz 

& Warc bands. Usermodifiable 

for 28 MHz 

(FCC license required). 

Size:18 1 /2Dx17Wx10H”. 

77 pounds. UPS shippable, 

3 boxes. 

Ameritron’s 3CX1200Z7 Amplifier Ameritron’s Dual 3-500Z Amplifier 

AL-1200 

$ 3795 


AL-1500 amplifier that 

loafs at full power. A 

3CX1200Z7 has the 

lowest quantity history 

of field replacement of any modern 

transmitting tube that we use. It has 

the ruggedness and power handling of 

ceramic tubes combined with the longlife 

of thoriated tungsten filaments. 

Ham Radio’s toughest 

tube -- the Eimac (R) 

3CX1200Z7 is in ham 

radio’s toughest amplifier! It 

has a 50-Watt control grid 

dissipation. It also has the 

same super heavy duty 

power supply that’s in our 

AL-82 

$ 2745 


This classic linear gives you 

full legal output using a pair of 

3-500Z graphite tubes. Examine 

the features and component ratings 

of the AL-82 and compare 

it to any competing amplifier 

using two 3-500Zs. Most competingamplifiers 

using 3-500Zs can’t 

give you 1500 Watts because 

their lightweight power supplies 

can’t use these tubes to 

their full potential. Our AL-82 amplifier 

uses the same Hypersil (R) power transformer 

and used in the AL-1500 and AL- 

1200 amplifiers -- powerful stuff, just 

loafs at full power! 

Hypersil (R) Transformer weighs 32 lbs. 

Slug Core Tuning 

Tool 965-6204, $3.00. Plastic tuning stick for 

adjusting slug cores. .1 inch hex end, 7 1 /4” long. 

Fits Ameritron tube amplifier input coils.

Ameritron1200W Output Solid State Amplifier 

1200 Watts PEP Output, Instant bandswitching, no tuning, no warm-up, SWR protected, 1.5- 

22 MHz . . . Quiet Variable-Speed Cooling System . . . PEP Forward/Reflected Metering . . . 

PA Balance /ALC Metering and LED Indicator . . . Front Panel Band and Error LEDs . . . 

ALS-1300 

$ 2899 


Call Your Dealer for Your Best Price! 

AMERITRON ALS-1300 is a solid state 

near legal limitTM FET no-tune Amplifier. 

Get instant bandswitching, no tuning, no 

warm-up, no tubes to baby and no fuss! 

Reliability of the ALS-1300 is insured 

by using eight rugged MRF-150 power 

FETs. Ameritron’s eight FETs are mounted 

on the dual heavy duty heat sink. They are 

properly arranged to spread out the heat 

over a large surface, something that other 

amplifiers using a single power device cannot 

do. Some FETs actually are a package 

of several transistors in one large case. 

This concentrates all of the heat in one 

small package. They not only are more difficult 

to cool, if one transistor fails they all 

have to be replaced. 

The Ameritron ARI-500 Amplifier 

Radio Interface reads band data from your 

Icom, Yaesu, Kenwood* or Alinco transceiver 

so they can remotely and automatically 

band switch your Ameritron Solid 

State Amps (ALS-500M, ALS-600, and 

ALS-1300). 

Now you can mount your amp out-ofthe-way 

in your trunk, at the back of your 

motorhome or elsewhere and operate with 

just this tiny box at your station control. 

The ALS-1300 RF deck operates from 

50 Volts for efficient, low distortion linear 

RF power service. It’s cooled by a whisper 

quiet cooling fan. Fan speed is regulated 

by temperature sensors, assuring minimum 

noise for adequate cooling. 

ALS-1300 runs up to 1200 Watts of 

clean SSB output power (just 100 Watts 

drive gives you the full rated 1200 Watts 

output) for continuous coverage between 

1.5-22 MHz. 10/12 Meters available to 

licensed amateurs with an optional kit 

(MOD-10MK, $39.95). Must present FCC 

license at time of sale. 

The operator-friendly layout fits nearly 

any station configuration. The attractive 

desktop amplifier unit weighs only 22 

pounds. Compact 10Wx 6 1 /2Hx18D inches. 

SWR Protection prevents amplifier damage 

if you switch to the wrong band, use the 

wrong antenna or have a high SWR. Overpower 

protection enables if output forward 

power or reflected power exceeds a safe level. 

Output power is automatically reduced 

to prevent amplifier damage by controlling 

ALC to exciter. 

LED illuminated Cross-Needle SWR/ 

Wattmeter lets you read SWR, forward and 

reflected peak power simultaneously. You 

also get ALC, SWR, PA balance and transmit 

meter and LED indicators. An Operate/ 

Standby switch lets you run “barefoot”, but 

you can instantly switch to full power if needed. 

Front-panel ALC control! This exclusive 

Ameritron feature lets you adjust output 

power on the convenient front panel display. 

You also get front panel Operation, Band, 

Let your rig auto bandswitch your Solid-State Ameritron Amps 

ARI-500 

$ 119 95 


Works with serial numbers above 13049 

(below 13049 requires the ARF-500K, see 

above). You can add the ALS-500RC for 

manual bandswitching and data monitoring, 

etc, see page 95 for description. 

*Not compatible with Kenwood TS-480, 

2000 rigs. 

AMERITRON precision peak-reading SWR Wattmeters 

Flat Mount Mobile SWR/Wattmeter Base Station 1500 Watt SWR/Wattmeter 

Just 15 /8” thick - 

- easily mounts on 

your dashboard for 

easy viewing. Flat 

mount on wall or shelf in your ham 

shack for best viewing angle. Remote 

sensor with 25 feet thin, flexible cable 

lets you place sensor and coax out-ofthe-way. 

Handles full 1500 Watts, 1.8-30 MHz. LED 

lighted Cross-Needle meter. Active electronics lets 

you read true peak or average power in two power 

ranges. Has “High SWR” LED. Flat-Mount watt-meter 

measures 5Wx31 /4H x15 /8D”; remote sensor is tiny 

31 /2Wx23 /4H x23 AWM-35/H 

$ 95 159 Suggested Retail 

/4D”. Use 9V battery or 12 VDC. 

AWM-35 has 300 Watt low, 3 kW high meter scale. 

AWM-35H has 100W low, 1000W high meter scale. 

Model # 

RJ-13D 

RJ-7DI 

RJ-DB97DK 

RJ-DB8MK 

RJ-DB9Y 

RJ-8MY 

RJ-8MY2 

RJ-8DY 

We painstakingly designed 

the AWM- 30 to make accurate, 

precise power measurements. 

Designed-in-accuracy is the 

result of a carefully designed 

and error LED indicators like reflected power 

and bandswitch errors. 

Enjoy 1200 Watts of no tune Solid State 

power with the Ameritron ALS-1300 amp. 

But it gets even better than this! Do you 

want to place even the main ALS-1300 

amplifier out of the way? Do you want the 

ALS-1300 to change bands automatically 

when you change bands on your radio? 

You now have these options. 

A pair of RJ45 remote control interface 

jacks on the amplifier permits ALS-1300 to 

be controlled either manually by the optional 

ALS-500RC (see page 95) Remote Control 

Head, or automatically by the optional ARI- 

500 (see below) Auto Band Switch. 

The Automatic Band Switch reads band 

data from your transceiver and automatically 

changes the ALS-1300 bands as you 

change bands on your transceiver. A superclean 

layout with easy-service modular 

construction will give you years of operation. 

ALS-1300SPS Power Supply 

The ALS-1300 is 

powered by a 50 VDC 

switching power supply. 

Comes with pre-wired 

cable to plug into the 

ALS-1300. This hash-free 

fully-regulated switching 

power supply is only 12 lbs. and measures a 

compact 10Wx6 1 /2Hx9 1 /2D in. It can be 

placed conveniently out-of-the-way at your 

operating station. Output is 50 VDC at 50 

Amps to the ALS-1300. Wired for 220 

VAC, selectable to 110 VAC. Draws less than 

25 Amps at 110 VAC; 12A at 220 VAC. 

ARI-500 Cables . . . $24.95 

AWM-30 

$ 149 95 


Transceiver 

Icom 706, 7000, 718 

Icom ACC2, 7 pin 

TS-2000, 570, 870 

Kenwood and compatibles 

FT-847 CAT 

FT-847 Tuner Port 

FT-857D, 897D, 1000MP 

Yaesu with 8 pin Data 

directional coupler, an accurate active peak reading 

circuit and a precision d’Arsonval meter 

movement. Ameritron’s AWM-30 reads true-peak 

or average power on a large LED lighted three inch Cross-Needle 

meter. Handles 1500 Watts, 1.8 to 30 MHz. Has 3000/300 Watt 

ranges. Reads forward and reflected power and SWR on highly 

visible dual cross-needle meter movement. 

Remote sensor with cable lets you conveniently place sensor. 

Battery saver turns unit off with no RF applied. Uses 12 VDC or 9 

volt battery (not included). Beautiful wrap-around custom metal 

cabinet looks great in your shack. Compact 4 1 /2Wx4 1 /2Hx5 1 /2D in. 


AMERITRON no tune Solid State FET Amplifier 

No tuning, no fuss, no worries -- just turn on and operate . . . Incredibly low $1499 includes 

AC power supply, 600 Watts output, continuous 1.5-22 MHz coverage, instant bandswitching, 

no warm-up, no tubes to baby, fully SWR protected, extremely quiet, very compact . . . 

• Made in U.S.A. 

ALS-600 

$ 1499 


(Includes AC Power Supply, ALS-600PS) 

AMERITRON’s revolutionary 

ALS-600 is amateur radio’s only linear 

amplifier that uses four rugged 

TMOS RF power FETs -- gives 

unequaled no tune solid state performance. 

$1499 includes our no 

tune FET Amplifier and a 120/220 

VAC, 50/60 Hz AC power supply 

for home operation. 

You get instant bandswitching, no tuning, no warm-up, no fuss! 

ALS-600 gives 600 Watts PEP Output power and 500 Watts CW 

with continuous coverage 1.5 to 22 MHz; 10/12 Meters with easyto-install 

optional kit, $29.95 plus shipping. Must present FCC 

license at time of sale. 

SWR Protection prevents amplifier damage if you switch to the 

wrong band, use the wrong antenna or have a high SWR. Overpower 

protection enables if output forward power or reflected 

power exceeds a safe level. Output power is automatically reduced 

to prevent amplifier damage by controlling ALC to exciter. 

The ALS-600 is extremely quiet. A low speed, low volume fan 

is so quiet you’ll hardly know it’s there, unlike noisey blowers 

used in other amplifiers. The ALS-600 is a compact 6x9 1 /2x12 

inches -- takes up less space than your rig! Weighs just 12 1 /2 lbs. 

An LED illuminated Cross-Needle SWR/Wattmeter lets you 

read SWR, forward and reflected peak power simultaneously. An 

Operate/Standby switch lets you run “barefoot”, but you can 

instantly switch to full power if you need it. 

You get a front-panel ALC control! This exclusive AMER- 

ITRON feature lets you adjust your output power on the convenient 

front panel display. You also get front panel Transmit, ALC, 

and SWR LED indicators. A 12 VDC output jack lets you power 

low current accessories. Enjoy 600 Watts of no tune Solid State 

power. Call your favorite dealer for your best price. 

But it gets even better than this! Do you want to place even the 

main ALS-600 amplifier out of the way? Do you want the ALS- 

600 to change bands automatically when you change bands on 

your transceiver? You now have these options. A pair of RJ45 

remote control interface jacks on the amplifier permits ALS-600 to 

be controlled either manually by the compact ALS-500RC Remote 

Control Head, or automatically by the ARI-500 Automatic Band 

ARF-1000 RF Filter 

reduces harmonics 

Use with rigs or amps that are producing 

unwanted harmonics. 

Frequency select switches to one of 

six different ranges from 1.5 to 30 

MHz. Handles 1000 W SSB input 

power, 600 W CW or 400 W RTTY. 

SWR is less than 1.3:1 on all ham 

ARF-1000 

$ 159 95 

Suggested 

Retail 

bands. SO-239 connectors. 5 1 / 2Wx3 1 / 2Hx9 1 / 2D in. 

94 www.ameritron.com 

Switch. The Automatic Band Switch reads band data from your 

transceiver and automatically changes the ALS-600 bands as you 

change bands on your transceiver. See more details on page 6. 

ALS-600PS Heavy Duty Power Supply 

•Massive choke input filter greatly improves voltage regulation 

and reduces peak AC line current • AMERITRON’s exclusive 

Multi-Voltage Power Transformer lets you compensate for stressful 

high line voltage and performance robbing low line voltage • Step- 

Start Inrush ProtectionTM stops damaging inrush currents and 

extends the life of your power supply components • Illuminated 

Cross-Needle Meter monitors voltage and current of 50 VDC line. 

• Extremely quiet fan • Very compact 6x91 /2x12 inches -- can be 

placed conveniently out of the way • Wired for 120 VAC, supplies 

50 VDC at 25 Amps to ALS-600 amplifier • Also use on 100-130 

VAC and 220-250 VAC, 50/60 Hz • Draws less than 12 Amps at 

100 VAC and less than 6 Amps at 230 VAC • Includes prewired 

cable to plug into ALS-600 amplifier. 

New! ARI-500, $119.95. Amplifier Radio Interface reads band 

data from your transceiver so you can automatically bandswitch 

your ALS-600 amplifier. See Page 9. 

Switching Power 

Supply for ALS-600 

Works with all ALS-600 amplifiers. 

Extremely lightweight, just 

Add-on Electronic Bias 

for AL-82/1200/1500 

EBS-1 pc board reduces heat 

by reducing quiescent current 

to low values during periods 

when exciter output falls below 

100 mW. Remote detector 

board. EBS-1H, $49.95, other 

amps. 662-323-8211 details. 

ALS-600SPS 

$ 699 

Suggested 

Retail 

10 lbs. Superb regulation, very low radiated noise. 

Measures a compact 9Wx6Hx14 1 /2D inches. Great for portability! 

ALS-600 Amp with Switching Power Supply 

ALS-600S, $1599. ALS-600 amplifier with 10 lb. 

ALS-600SPS switching power supply combo. 

Just don’t take it from us . . . here’s what “they” 

say about our solid state base station amplifier: 

From QST Magazine, March, 2005 

“. . . the ampifier faulted only when it was supposed to. It protected 

itself from our boneheaded, sleep-deprived band changing manuevers . . .” 

“I found myself not worrying about damaging this amplifier. It 

seems quite capable of looking out for itself. . . . Kudos to Ameritron.” 

“I couldn’t hear any noise at all from the SPS (switching power supply) 

on the vertical or quad . . .” 

“I came to greatly appreciate the size, weight, reliability and simplicity 

of this amplifier.” 

“The ALS-600S makes it possible to pack a transceiver and a 

600 Watt amplifier, that together weigh less than 30 pounds.” 

AMERITRON Inrush Current Protector stops damaging inrush current 

Protects your amplifier, tubes and power supply components . . . 

ICP-120 

or ICP-240 

$ 79 95 

Suggested 

Retail 

When you first turn 

on your amplifier, a 

massive inrush current 

gushes in. House 

lights flicker as you 

hear a loud “thump” 

from your amp. This terrible 

inrush current stresses all your 

power supply components to their 

limits. Your cold tube filament suffers 

abusive thermal shock. 

Eventually, this massive inrush current will damage 

your amplifier. 

Ameritron’s Step-Start Inrush Current 

ProtectorTM stops damaging inrush current. 

Momentary high-voltage “spikes” in the AC 

line can also cause damage to your amp. The 

ICP-120/240 has built-in varistors to absorb 

these spikes before they can cause damage. 

Works with nearly all linear amplifiers. 

By starting your linear amplifier through a 

high power current limiting resistor and then 

EBS-1 

$ 39 95 


shorting the resistor with a relay, the start-up 

sequence is easier on tube and power supply 

components. All Ameritron kilowatt amplifiers 

have this critical protection -- now you can add 

this protection to your amp without complicated 

wiring -- you don’t even have to remove the cover! 

Ameritron ICP-120, $79.95 for 120 Volt 

wired amplifiers. Limits current to 12 Amperes 

during heavy draw inrush period, 20 Amperes 

during continuous operating current. ICP-240, 

$79.95 for 240 Volt wired amps. 

GOP-100 Grid Overload 

Protection Module - $ 39 95 

Grid Overload Protection 

module protects your amp’s 

tube from excessive grid 

current. Fast-acting electronic 

circuit rapidly disables the 

amp if excessive grid current condition occurs. 

Easy to install in your Ameritron amp. Factory 

installation available, 662-323-8211 for details.

AMERITRON mobile no tune Solid State Amp 

500 Watts, Instant bandswitching, no tuning, no warm-up, SWR protected, 1.5-22 MHz . . . 

NEW! ARI-500 Amplifier Radio Interface reads transceiver band data -- automatically band- 

switches ALS-500M amp . . . NEW! ALS-500RC Remote Head gives total remote control! 

ALS-500M 

$ 899 


Just turn on and operate -- no warm-up, no 

tuning, instant bandswitching. Compact. 

Ameritron's ALS-500M solid state mobile 

amp gives you 500 Watts PEP SSB or 400 

Watts CW output! Covers 1.5-22 MHz, 

(10/12 Meters with MOD-10M, $29.95 kit, requires FCC license). 

Mail with order to Ameritron. 

Virtually indestructible! Load Fault Protection eliminates 

amplifier damage due to operator error, antenna hitting tree 

branches, 18-wheeler passing by. Thermal Overload Protection 

disables/bypasses amp if temperature is excessively high. Auto resets. 

Typically 60-70 watts in gives full output. ON/OFF switch 

bypasses amplifier for "barefoot" operation. Extremely quiet fan 

comes on as needed. Excellent harmonic suppression, push-pull 

output, DC current meter. 13.8 VDC/80 Amps. Super-compact 

3 1 /2x9x15 inches. 7 pounds. 

ALS-500M, $899, 500 Watt mobile amp. 

ALS-500MR, $929, ALS-500M mobile amp plus ALS-500RC Remote 

Head for full manual remote control. 

ARF-500K, $179.95, Remote kit for older ALS- 500M mobile 

amps with serial # below 13049. Includes filter/relay board for 

ALS-500M, AL-500RC Remote Head, cables, hardware, instructions. 

ARF-500K2, $289.95. Includes ARF-500K Remote kit for older 

ALS-500Ms plus ARI-500 Amplifier Radio Interface below. 

New ARI-500, $119.95, Amplifier Radio Interface reads band 

data from your transceiver so you can automatically bandswitch 

your ALS-500M amplifier. See below left. 

Choose ARI-500 for fully automatic bandswitching or ALS-500RC 

for manual remote control. New ALS-500RC, $49.95, Remote Head 

lets you place your ALS-500M or ALS-600 

amplifier out-of-the-way and gives you full 

manual remote control. Select desired band, 

turn on/standby and monitor current draw on 

its DC Current Meter. Power, transmit and 

overload LEDs. RJ-45 cables plug into 

Amplifier/ Remote Head. Works with serial 

numbers above 13049 (below 13049 requires the ARF-500K, 

above). Compact 4Wx2 3 /4Hx1D inches. 

Let your rig auto bandswitch your Solid-State Ameritron Amps 

The Ameritron ARI-500 Amplifier 

Radio Interface reads band data from your 

Icom, Yaesu, Kenwood* or Alinco transceiver 

so they can remotely and automatically 

bandswitch yourAmeritron Solid 

State Amps (ALS-500M, ALS-600, ALS- 

1300). 

Now you can mount your amp out-ofthe-way 

in your trunk, at the back of your 

motorhome or elsewhere and operate with 

just this tiny box at your station control. 

Works with serial numbers above 13049 

(below 13049 requires the ARF-500K, see 

above). You can add the ALS-500RC for 

Base Operation Power Supply for your ALS-500M Amplifier 

Ameritron’s heavy duty 75 Amp switching power supply is 

excellent for powering your HF mobile amplifier or your HF and 

VHF/UHF rigs and accessories. 

It’s great for Ameritron’s ALS-500M Solid State Mobile HF 

Amplifier and others with a power requirement of up to 75 Amps. 

SPS-75MV delivers 75 amps maximum and 70 amps continuously 

without even flexing its muscles. Plugs into any 110 VAC 

wall outlet. 

It’s highly regulated with load regulation better than 1%. 

Ripple voltage is less than 12 mV peak-to-peak at rated load. 

No RF hash! Ameritron’s exclusive HashSQUASH TM Filtering 

manual bandswitching ARI-500 

and data monitoring, etc, $ 95 

see page A-6 for 119 

description. 


*Not compatible with 

Kenwood TS-480, 2000 rigs. 

SPS-75MV 

$ 259 95 


Has 

Anderson 

PowerPoles TM ! 

ARI-500 Cables . . . $24.95 

Model # 

RJ-13D 

RJ-7DI 

RJ-DB97DK 

RJ-DB98MK 

RJ-DB9Y 

RJ-8MY 

RJ-8MY2 

RJ-8DY 

Transceiver 

Icom 706, 7000, 718 

Icom ACC2, 7 pin 

TS-2000, 570, 870 

Kenwood and compatibles 

FT-847 CAT 

FT-847 Tuner Port, 450/950 

FT-857D, 897D, 10000 

Yaesu with 8 pin Data 

AMERITRON’s Exclusive HashSQUASH TM 

Filtering System eliminates RF hash 

that plagues other manufacturer’s 


System eliminates RF hash that plagues other manufacturer’s 


Fully protected -- your SPS-75MV has Short-Circuit, Over-load 

and Over-Temperature protection systems. Also has an auto restart 

after a fault. Has power on and Fault LED indicators. 

You get front panel adjustable voltage from 4.0 to 16 VDC. 

Front-panel meters with backlight let you monitor voltage and current 

simultaneously. 

Attractive front panel features several options for connecting 

your gear: One pair of 5-way binding posts, two pair of Anderson 

PowerPoles TM one pair of high-current 5-way binding posts, a cigarette 

socket for mobile accessories, and two pairs of quick connects. 

Whisper quiet fan speed increases as load current increases -keeps 

components cool and protected. Battery charging feature. 

Measures 9 3 /4Wx5 1 /2Hx9 1 /2D inches. Weighs just 10.5 lbs., so 

it’s still light enough to carry on DXpeditions, camping trips and 

vacations. No more hauling around big, bulky conventional power 

supplies that can give you a hernia! 


ARB-704 will work 

with almost any transceiver 

without the need of the 

plug-and-play pre-wired 

cable. 

The ARB-704 

advanced interface is compatible 

with all common 

radios and amplifiers even 

though radios and amplifiers 

do not have standardized 

voltages, accessory plugs, or wiring. It’s 

designed to work with any amplifier/radio combination. 

The input is designed to be compatible with 

any transmitter or transceiver, and the output is 

compatible with AC control lines or DC positive 

or negative amplifier control lines having up to 

200 Volts peak open circuit voltage and 300 mA 

of operating current. 

Why you need the ARB-704 

Amplifiers can damage radios if the amplifier 

has too much relay control voltage, voltage 

spikes, or excessive current on the relay control 

line. Such damage often appears as “stuck” or 

“sticky” transmit relays in exciters or shorted 

transistors on transmit control lines. In most 

cases where the radio is damaged, the system 

transmits normally but the external amplifier 

AMERITRON QSK-5 High Power Transmit/Receive Switch 

This self-contained AMERITRON 

QSK-5 Transmit/Receive Switch uses 

electronic PIN diode switching to give 

you lightning fast QSK operation 

from nearly any HF linear amplifier. 

It lets you use your linear amplifier for high 

power QSK CW, for packet, AMTOR and any 

mode requiring extremely fast switching 

between transmit and receive. 

Installation is simple. Just plug in a few 

cables to start enjoying QSK -- there’s no complicated 

internal wiring. 

The world’s most advanced QSK switch has 

new technology that’ll make your amplifier last 

longer and prevent TVI, RFI and key clicks. 

AMERITRON’s exclusive AmpSaver TM 

(available in QSK-5PC) completely turns off 

your power amplifier tube current between dots, 

dashes and words! This new QSK technology 

gets rid of unwanted power dissipation that causes 

damaging heat. Your expensive amplifier 

Tune-up your linear amplifier perfectly without overheating, 

tube damage, power supply stress, arc over . . . 

ATP-100 

$ 95 69 


AMERITRON Amplifier-to-Transceiver Interface 

Protects expensive radio from damage by keying line transients and steady state current and voltages 

QSK-5 

$ 399 95 


The ATP-100 Amplifier Saver TM lets you safely 

tune up your linear amp-lifier perfectly for full 

power output and best linearity. 

It protects your expensive amplifier from 

overheating, tube damage, power supply stress 

and arc-over during tune-up. It prevents premature 

failure and costly component replacements. 

AMERITRON’s innovative pulse tuning 

technology lets you tune your amplifier at full 

peak output power for best linearity. It keeps 

stays locked in a 

“transmit” mode. 

This prevents receive 

signals from coming 

through the amplifier with normal levels whenever 

the amplifier is in the “ON” or “OPER- 

ATE” position. 

The ARB-704 has many electrical advantages 

over conventional relay buffer systems. The 

ARB-704 has no moving parts, switches almost 

instantaneously. It is noiseless, has very long 

life, and will not develop dirty contacts. It operates 

with negative, AC, or positive amplifier 

relay control lines. 

It works with any relay voltage (AC, positive, 

or negative) up to 200 peak volts and any relay 

current up to 300 mA. The ARB-704 is fully 

compatible with conventional amplifier relay 

systems. It is especially suited for buffering 

vacuum relay QSK amplifiers, since the ARB- 

704 does not affect attack or release times in a 

deleterious manner. 

runs cooler so every component in your amplifier 

lasts longer. 

Our exclusive SureSwitch TM handshaking prevents 

“hot switching” RF power. Prevents TVI, 

RFI, key clicks and possible damage to your 

amp. 

The QSK-5 is six times faster than a typical 

mechanical vacuum relay “QSK” switch that can 

just barely keep up with QSK transceivers. As 

radios get faster and better, mechanical switching 

just won’t be able to switch fast enough. Unlike 

average power to a low safe level to prevent 

overheating and power supply stress. 

“Why can’t I just tune up at low power to 

reduce overheating and component stress?” you 

ask yourself. Well you can . . . but if you don’t 

re-tune at high power (which causes overheating) 

you can create severe splatter and abuse your 

tube grids because of excessive grid current. 

If your linear uses tubes that are easily damaged 

by normal tune-up, the ATP-100 could 

extend tube life. 

“Sniff-out” RFI or TVI caused by rusty guy 

wires, rain gutters, clotheslines and others by 

generating full peak power without amplifier 

damage. Also use to evaluate wattmeters and 

QSK systems. 

Set and forget internal trimpots let you tailor 

duty cycle and pulse rate precisely for your rig 

and amplifier. Plugs into your rig’s CW key 

jack. Simply press Pulse Tune button and tune 

your amplifier normally for maximum power 

output. 

Locking Pulse Tune and momentary Carrier 

Tune buttons. Fully shielded all metal case. 


ARB-704 

INTERFACE BUFFER 

$ 59 95 

ARB-704I2 

for IC-706 series radios 

(Includes PNP-13D) 

The ARB-704 operates with transmitters or 

transceivers that pull amplifier control lines to 

ground, or output a wide range of positive or 

negative control voltages. The transmitter only 

switches currents under 0.35 milliamperes and 

very low voltages when using the ARB-704. 

Measures a super compact 4 1 /4Wx1 3 /4Hx2 3 /4D 


PLUG-AND-PLAY CABLES 

Cables are $17.95 each. 

ARB-704 is supplied with the following: 1. 

One power connector cord and plug with red 

wire (+12 Volts) and black wire (negative and 

ground). 

2. Three phono (RCA) cord with connectors 

on each end. These cables are for relay, ALC 

and amplifier control lines. 

Model# Transceivers 

PNP-8D FT-1000/2000,(MP), 767GX,920,990,747GX 

PNP-8M FT-890, 840, 817, 857, 897, FT450, 950, 900 

PNP-35 FT-100, (D) 

PNP-5M FT-847 

PNP-7D TS-440, 690, 450, 180, 140, 950, 130, 870, 2000, 

50, 120, 530, 430, 830, 850, 940, 570 

PNP-13D All models of the IC-706 series, 718, 7000 

PNP-7DK TS-930 (serial numbers lower than 309) 

PNP-8MK 

PNP-5D 

TS-480 

FT-980 

A plug-and-play cable is not 

needed if your radio is not listed. 

PNP-8DI ICOM ACC JACK 

PNP-7DI ICOM ACC 2 JACK 

noisy mechanical vacuum relays, the QSK- 5 is 

extremely quiet -- there’s no relay chatter keeping 

you from enjoying QSK. 

You won’t have to pay for QSK again if you 

buy another amplifier. Unplug the QSK-5 and 

use it with your new amp. 

Handles 2500 Watts PEP and 2000 Watts CW 

in normal amateur service when SWR is below 

1.5:1. Handles 750 Watts on continuous carrier 

modes such as RTTY, SSTV, and FM. Optional 

cooling fan (CF-5, $39.95) allows sustained 

operation at 1500 Watts in any mode. Use with 

positive voltage keying up to +25 Volts. 

6Dx4Hx91/2W”. 

Internal QSK Available for the following 

AMERITRON models: AL-80B, AL-1500, AL- 

1200, AL-82, AL-800, and AL-800H. 

Contact Ameritron for installation details on 

the QSK-5PC internal switch. 

3 1 /4Wx1 1 /4Hx4D inches. Uses 9 Volt battery. 

Order ATP-100, $69.95. 

Deluxe Amplifier Saver 

. . . with External Duty Cycle and 

Pulse Rate Controls 

ATP-102, $79.95. Deluxe version 

has Duty Cycle and Pulse Rate 

Controls on front panel for easy performance 

testing of wattmeters, QSK 

systems and other equipment.

AMERITRON HF Mobile “Screwdriver” Antenna Programmable 10-Memory 

1.2 kW... 3.5-30 MHz continuous ...1.5:1 VSWR...more! 

SDA-100 

$ 95 439 

Suggested 

Retail 

AMERITRON's SDA-100 is the best 

built, best looking, best performing HF 

mobile screwdriver antenna in the world! 

Properly installed on your vehicle this 

antenna covers 80-10 Meters with a 6 foot 

whip. Remove the whip for 40-6 Meters. 

What makes our antennas stand above 

all the rest is that our CNC machined components 

are from aircraft aluminum or stainless 

steel and blueprinted, meaning you can 

take the antennas apart and mix them up, 

then reassemble and they work the same. 

Our fiberglass coil form is approximately 

2 inches in diameter. Other antenna 

builders know fiberglass is better but they 

choose not to use it because of the expense 

and difficulty in machining. We use 14 

gauge wire for high power capability, 

wound at eight turns an inch for maximum 

efficiency. We machine groove our coils so 

they will not loosen up or jam -- they won't 

wear out, for years of trouble free service! 

ALS-500M DC Power Wire Harness 

MIA-6, $69.95. Get an 

extra DC power harness 

for your ALS-500M 

amplifier. Saves you from 

the hassle of moving your 

amp cable assembly. Fully assembled 8 

foot cable, fuse holders and fuses included. 

New Lexan cover is super durable and 

protects your Ameritron screwdriver for 

years of trouble-free service. 

The decoupler we use is CNC machined 

for tight tolerances with custom fingerstock 

designed to contact 3 turns of coil all 

the time with over 25 pounds of combined 

contact pressure. With this design you can 

run up to 1.2 kilowatts PEP, trouble free. 

It's so superior to anything else on the market 

that we put our outstanding AMER- 

ITRON warranty behind it. 

We use a new heavy duty Pittman commercial 

12 volt gear motor, which is very 

durable and quiet while receive tuning. 

This motor is super heavy duty for years of 

trouble-free service. Antennas come with 

sensors already installed so if you add an 

auto controller, everything is ready. 

The AMERITRON SDA-100 includes: 

Up/Down switch; 5 feet of motor DC 

cable with detachable weather sealed connector; 

decoupling toroid matching coils. 

SDA-100 comes in a handsome black, 

using Dupont Basecoat/Clearcoat system. 

Optional accessories: 

SDM-100, $99.95. Stainless steel 

flange mount base bracket , with multiple 

pre-punched holes. The SDA-100 

mounting rod is a 1-in. pipe thread 

14-inches long. Ship Code B. 

SWP-100, $24.95. 6-ft stainless 

steel whip. 

SMC-100, $4.95. Shunt matching 

coil with solder lugs. For use at base of 

mobile/screwdriver antennas with high SWR. 

Combination Prices 

SDA-110, $539.95. Combination SDA- 

100 mobile screwdriver antenna, SDC- 

100B auto-controller, and SWP-100 whip. 

SDA-112, $569.95. Combination of 

SDA-100, SDC-102 and SWP-100. 

SDA-113, $589.95. Combination of 

SDA-100 screwdriver antenna, SDC-103 

auto-controller, and SWP-100 whip. 

Ameritron Mobile Installation Accessories 

In-Line Fuse Holder/Distribution Block 

MIA-1, $6.95. 

AGU in-line fuse 

holder; heavy 

duty, waterproof, 

handles to 80A, 

4-10 gauge wire, 

built-in mounting bracket. 

MIA-2, 

$14.95. 

AGU in-line 

fused power 

distribution 

block; 1 

input for 4 

gauge wire, 2 outputs for up to 8-gauge 

wire, plastic cover with mounting ears. 

Remote Power ON/OFF for Amplifier 

MIA-3, $59.95. 12 

VDC Bosch relay. Turns 

amplifier high current DC 

supply line ON/OFF 

remotely with vehicle 

ignition switch. SPST, 

heavy duty dual contacts. Handles 75 Amps. 

Battery Post Break-out Block 

MIA-4, $14.95. Don’t damage 

your amp because of poor 

battery connections. Replace old 

clamps with this gold metal 

battery break-out block. Has 4 

AWG terminal for your auto battery and 

two 8 AWG connections for your amplifier. 

Braided Ground Strips 

MIA-5, $9.95. Makes 

solid grounding for your 

mobile radio or screwdriver 

antenna installtion. 

Made from ultra-fine tinned 

copper braid. Extremely flexible. 7/8-inch 

width, 13” long. 3/8” holes on each end. 

Screwdriver Controller 

The SDC-102 lets you 

save 10 screwdriver antenna 

positions in memory. 

With a push of a button, 

you can quickly return to 

any saved position. 

Up/Down buttons let 

you manually move the 

antenna to any desired position. 

A 4-digit turns counter 

with bright see-in-the-sun 

LEDs gives you precise antenna position. 

The antenna always moves to its desired 

position from the bottom, insuring that the 

motor is always loaded the same. 

Ameritron’s AutoPark TM feature automatically 

bottoms your antenna for parking in 

your garage and resets and calibrates your 

counter each time to eliminate antenna slippage 

and turns count errors. 

Ameritron’s Dead-OnSTOP TM feature 

eliminates overshoot for dead-on stops. 

Ameritron’s StallProtector TM feature shuts 

off stalled motors to prevent motor burnout. 

Motor current can be monitored for signs 

of trouble and to determine stall current. 

Motor direction can be reversed so the UP 

button is always up. Compatible with single/ 

dual magnetic sensors. 3 1 /2Wx3 1 /4Hx1 1 /4D in. 

Automatic Screwdriver Antenna 

Controller for Icom Transceivers 

Ameritron’s SDC-103 

is perfect for your Icom 

radio equipped with a CI- 

V interface. Connect the 

controller to your Icom rig 

and the SDC-103 receives 

the frequency data and 

will automatically tune 

your screwdriver antenna. Has 

all features of the SDC-102. 

31 /2Wx31 /4Hx11 /4D inches. 

SRS-100, $29.95. Magnetic sensor kit for 

High Sierra to use SDC-100/102/103. Not 

compatible with SidekickTM Ship Code A 

. 


Hi-Q antennas to use SDC-100/102/103. 

Ameritron Digital 

Screwdriver Controller 

4-digit super bright LEDs tell 

you exactly where your antenna 

is postioned! Re-tune exactly -fast, 

no guessing. Digital count 

range -999 to +999. On/ off/ 

reset switch for easy calibration. 

4Wx1 1 /2H x2D”. Use 13.8VDC. 

SRS-100, $29.95. Magnetic 

sensor kit for High Sierra. Not 

compatible with Sidekick TM . 

SDC-102 

$ 129 95 

Ship Code A 

SDC-103 

$ 149 95 

SDC-100B 

$ 109 95 

Ship Code A 


Hi-Q Antennas. 

High Current Amplifier Power Cable 

Highly flexible, 

105 degrees celsius, 

600 Volts, tinned copper PVC cable. PVC 

jacket is resistant to oil, fuel, acids, grease and 

abrasion. Intended for mobile installation. 

Part# Red Part# Blk Cost/Ft Description 

871-1022 871-1000 .49 10AWG, 19/23, .176” OD 

871-0822 871-0800 $1.32 8 AWG, 19/21, .217” OD 

871-0622 871-0600 $1.84 6AWG, 49/22.5, .330” OD 

871-0422 871-0400 $2.36 4AWG, 70/22.5, .380” OD 

AMERITRON . . . the World’s High Power Leader! 97 

SDC-103

AL-811/AL-811H 

Specifications: 

Input: 

Circuit type: Pi-network, slug 

tuned coils. 

Maximum VSWR at resonance: 

1.3:1 

Minimum 2:1 VSWR bandwidth: 

15%. 

Max. drive power permissable: 

AL-811: 80 Watts; AL- 

811H: 100 Watts. 

Typical drive rated output: 

AL-811: 60 Watts; AL-811H: 

75 Watts 

Output: 

Typical SSB PEP voice operation: 

AL-811: 600 Watts, 

AL-811H: 800 Watts. 

Typical CW operation: AL- 

811: 400 Watts; AL-811H: 600 

Watts. 

1/2 hour PEP two tone test: 

AL-811: 500 Watts; AL-811H: 

650 Watts. 

1/2 hour continuous carrier 

(RTTY): AL-811: 300 Watts 

input; AL-811H: 400 Watts 

input. 

Power Supply: 

Circuit type: full wave 

bridge. 

No load voltage: 1700 Volts. 

Full load voltage: 1500 Volts. 

Full load current: AL-811: 

550 mA; AL-811H: 650 mA. 

Regulation: 10%. 

Maximum draw at rated 

output: AL-811: 8 A; AL- 

811H: 10A. 

AC Input: 120 V, 50/60 Hz 

(AL-811/H) 240 V, 50/60 Hz 

(AL-811X/AL-811HX). 

Tubes: 

Type: (AL-811: 3) 

(AL-811H: 4) 811A vertically 

mounted. 

Continuous dissipation: 65 

Watts per tube. 

Warm-up time: 

5 seconds 

Metering: 

Multimeter: reads HV and 

plate current. 

Grid Meter: Reads PA grid 

current 

ALC: 

Negative going, 0-20 V, 

adjustable, phono jack 

*Efficiency SSB (envelope 

crest): greater than 70% 

MARS/WARC: 

Yes, set to the nearest band. 

Connectors: 

Relay: engages amplifier 

when grounded. +12 VDC 

open circuit and supplies 100 

mA when grounded. A builtin 

back-pulse cancelling diode 

protects the exciter. 

RF input: 

SO-239, 50 Ohm input. 

RF Out: 

50 Ohms with full power into 

any SWR below 3:1. 

Power: 

NEMA 5-15P, 120 Volts. 

Dimensions: 

15 1 /2Dx13 3 /4Wx8 1 /4H inches. 

Operating Weight: 

32 pounds. 

Shipping Weight: 

41 pounds. 


Domestic model: 160, 80, 40, 

30, 20, 17, 15 Meters. 10/12 

Meters with modification. 

Must present FCC license at 

time of sale to obtain modification 

details. 

Third Order IMD at Rated 

Output: -33 dB. 

AL-80B 


Input: 


tuned coils. 


1.3:1 or less. 


20% of center frequency. 


100 Watts. 

Typical drive for full power 

output: 85 W. 

Output: 


1000 Watts. 

Typical CW operation: 800 

Watts. 


800 Watts. 


(RTTY): 500 Watts. 

Power Supply: 

Circuit type: Full wave voltage 

doubler. 


Full load voltage: 2700 Volts. 

Full load current: .450 Amp. 

Regulation: 10%. 

Transformer: 26 pounds. 

Capacitors: 33 uFd total, 

computer grade. 


output: 12 Amps. 

AC Input: 120 V, 50/60 Hz. 

Tubes: 

Type: Classic 3-500. 


Watts. 

Warm-up time: 5 seconds. 

Metering: 

Multimeter: reads HV, forward 

power, reflected power, 

SWR, ALC, ALC set. 

Current Meter: Reads plate 

and grid current. 

ALC: 

True ALC 0-10V negative, 

front panel adjustable. 

Efficiency CW: Typically 

66% or greater. 


crest): Approximately 66% or 

greater. 

MARS/WARC: 


Connectors: 

Keying: Supplies 100 mA 

when grounded, built-in backpulse 

cancelling diode, protects 

the exciter. 12 VDC 

open circuit. 

RF input: 


RF Out: 



Power: 


Dimensions: 



48 pounds. 


Unit, 54 lbs.; Tube, 3 lbs. 



30, 20, 17, 15 Meters. 10/12 




details. 



AL-572 


Input: 


tuned coils. 






100 Watts. 


output: 70 Watts. 

Output: 


1300 Watts nominal (7 

MHz). 

Typical CW operation: 

900 Watts nominal. 


1000 Watts. 


(RTTY): 650 Watts. 

Power Supply: 

Circuit type: Full wave voltage 

doubler. 




Regulation: 14% or less. 

Transformer: 21 pounds. 

Capacitors: 33 mFd total, 




AC Input: 120 V, 50/60 Hz. 

Tubes: Type: 572B (x4). 


Watts. 


Metering: 

Multimeter: reads HV, forward 

power, reflected power, 

SWR, ALC, ALC set. 



ALC: 

True ALC 0-10V negative, 

front panel adjustable. 

Efficiency CW: Typically 

60% or greater. 


crest): Typically 60% or 

greater. 

MARS/WARC: 


Connectors: 

Keying: Supplies 100 mA 

when grounded, built-in backpulse 

cancelling diode, protects 

the exciter. 12 VDC 

open circuit. 

RF input: 


RF Out: 



Power: 


Dimensions: 



40 pounds. 


48 lbs. 



30, 20, 17, 15 Meters. 10/12 



time of sale to obtain details. 


Output: -34 dB (below PEP 

rated output). 


AL-800/AL-800H 


Input: 

Circuit type: Pi-network, 

resistor attenuated/slug tuned 

coils. 




within +20% or -40% 

of selected band/ within 20% 

of center frequency. 


100 Watts. 


output: 70/55Watts. 

Output: Circuit type Pi/Pinetwork 

output. 


1250/1500+W 

Typical CW continuous 

operation: 1000/1500 W. 


1000/1500 Watts. 


(RTTY): 750/1000 W. 

Power Supply: Circuit type: 

Full wave voltage doubler. 


Full load voltage: 

2300/2250 V. 

Full load current: 1/1.2 A. 

Regulation: 12% or less/15%. 

Transformer: 32 lbs grain 

oriented El lamination. 

Capacitors: 78/63 uFd total, 

high current computer grade. 


output:12/13A@240 VAC. 

Typical line current at 1500 

Watt PEP output. 9A at 240 

VAC. Power line current in 

standby: .5 A at 240 VAC. 

AC Input: 120V, 50/60 Hz. 

Tubes: Eimac R 3CX800A7. 

Continuous dissipation: 

800W per tube, 1600W total. 


Estimated life: 6,000-8,000 

hours ICAS. 

Metering: Multimeter: reads 

Peak forward power, Peak 

reflected power, SWR, ALC 

threshold output voltage, and 

high voltage. 



ALC: Negative going, 0-10 V, 

phono jack output, front panel 

adjustments. 

Efficiency CW: Approximately 

65-66% or greater. 

Eff. SSB (envelope crest): 

Approx. 66% or greater. 

MARS/WARC: Yes, set to 

the nearest band. 

Connectors: 

Keying: Requires contact closure 

or sink of +12 VDC at 

100 mA, back pulse protected, 

phono jack. 

RF input: 


RF Out: 



Power: NEMA 5-15P, 

120/240 Volts. 

Dimensions: 

17 1 /4Dx14 1 /2Wx8 1 /2H in. 

Operating Weight: 51/52 lbs. 

Shipping Weight: Unit, 59/60 

lbs,; Tubes, 3/5 lbs. 



30, 20, 17, 15 Meters. 10/12 


Must present FCC license. 



AL-82 


Input: 


tuned coils. Maximum 

VSWR at resonance: 1.2:1 


20%. 


130 Watts. Typical 

drive rated output: 100 

Watts 

Output: 


1500 Watts. 

Typical CW continuous 

operation: 1500 Watts. 

30 second PEP two tone 

test:1800 Watts plus. 

1/2 hour PEP two-tone test: 

1800 Watts. 

Power Supply: 

Circuit type: full wave 

bridge, capacitor input. 




Regulation: 10% or better. 

Transformer: 32 lb HypersilR, 

capacitors: 26 uFd total, computer 

grade. Maximum draw 

at rated output: 13 Amps. 

AC Input: 240 V, 50/60 Hz. 

Tubes: 

Type: 3-500 Classic (2). 


Watts. 


Metering: 

Multimeter: Plate current, 

plate voltage, drive/ALC, 

power output (PEP Watts). 

Grid Meter: Reads PA grid 

current 

ALC: 

Negative going, 0-20 V, phono 

jack 

Efficiency CW: 65% typical. 


crest): 62% typical. 

MARS/WARC: 


Connectors: 

Keying: engages amplifier 

when grounded. +12 VDC 


mA when grounded. A builtin 



RF input: 


Power: 


Dimensions: 

18 1 /2Dx17Wx10H inches. 


76 pounds. 


Unit, 50 lbs.; Tubes, 6 lbs.; 

Transformer, 35 lbs. 



30, 20, 17, 15 Meters. 10/12 




details. 


Output: 

-34 dB at 1500 Watts Output. 

* Exact performance measurements may vary due to the accuracy of 

test equipment and the measurement methods used. (Prices and specifications 

subject to change without notice or obligation).

AL-1200 


Input: 


tuned coils. 






130 Watts. 


output: 130 W. 

Output: 

Circuit type: Pi-L. 


1800 Watts. 

30 second PEP two tone test: 

1800 Watts plus. 

Power Supply: 

Circuit type: Full wave 





Regulation: 10% or better. 

Transformer: 32 lb. 

Hypersil R . 

Capacitors: 26 uFd total, 




AC Input: 240 V, 50/60 Hz. 

Tubes: 

Type: Eimac R 3CX1200Z7. 


Watts. 

Warm-up time: 5 sec. 

Metering: 

Multimeter: Reads plate current, 



Grid Meter: Reads grid current. 

ALC: 

Negative going, 0-20 Volts, 

adjustable, phono jack. 

Efficiency CW: 65%. 


crest): 62%. 

MARS/WARC: Yes, set to 

the nearest band. 

Connectors: 

Keying: Engages amplifier 

when grounded, +12 VDC 


mA when grounded, built-in 



RF input: 


Power: 


Dimensions: 

18 1 /2Dx17Wx10H in. 


77 pounds. 


Unit, 50 lb., Tube, 5 lb., 

Transformer 35 lb. 



30, 20, 17, 15 Meters. 10/12 





Output: -34 dB at 1500 Watts 

output. 

AL-1500 


Input: Circuit type: Pi-network, 

slug tuned coils. 






100 Watts. 


output: 65 Watts. 

Output: 

Circuit type: Pi-L. 

1/2 hour continuous carrier: 

1500 Watts. 

30 second continuous carrier: 




30 second PEP two tone test: 


Power Supply: 

Circuit type: Full wave 




Full load current: 1 Amp. 

Regulation: 10% typical. 

Transformer: 32 lb. 

Hypersil R . Capacitors: 26 

uFd total, computer grade. 



AC Input: 240 V, 50/60 Hz. 

Tubes: 

Type: Eimac R 3CX1500/8877. 

Continuous dissipation: 1500 

Watts. 

Warm-up time: 180 sec. 

Metering: 

Multimeter: Reads plate current, 



Grid Meter: Reads grid current. 

ALC: Negative going, 0-20 

Volts, adjustable, phono jack. 



crest): 62%. 

MARS/WARC: 

Yes, set to the nearest amateur 

band. 

Connectors: 

Keying: Engages amplifier 

when grounded, +12 VDC. 

100 mA when grounded, builtin 



RF input: 


Power: 


Dimensions: 

18 1 /2Dx17Wx10H in. 


77 pounds. 


Unit, 50 lb., Tube, 3 lb., 

Transformer 35 lb. 



30, 20, 17, 15 Meters. 10/12 






* Exact performance measurements may vary due to the accuracy of 

test equipment and the measurement methods used. (Prices and specifications 

subject to change without notice or obligation). 

ALS-500M 



(US) 1.5 to 22 MHz continuous; 

(Export) 1.5-30 MHz 

continuous. 

Input: Circuit type: 

Broadband, resistor swamped. 


1.5:1. 

Bandwidth: Broadband. 

Maximum drive power permissible: 

100 Watts. 

Typical drive for rated output: 

60 Watts. 

Output: Circuit: Broadband, 

low pass. 


500 Watts PEP. 


Watts. 

Power requirement for 

amplifier: 

14-16 VDC, 80A (peak). 

Output devices: 

Transistor, (4) 2SC2879. 

Metering: 

Current meter, 0-100 A. 

ALC: None. 


Efficiency SSB: (envelope 

crest) 45%. 

MARS/WARC: Yes, continuous 

coverage. 

Keying: Relay closure or 

sinking to ground of +12 VDC 

at 100 mA, RCA phono jack. 

Power Supply connector: 

Beau multi-contact male chassis 

mount. 

Power Supply Cable: 8 foot 

pre-wired with Beau connector 

on one end; other end with 

5/8 inch ring lugs, 10 gauge 

wire (x2), in line fuse holders, 

fuses included. 

RF Connectors: 

SO-239 for input and output. 

Dimensions: 

15 1 /2Dx8 7 /8Wx3 3 /4H in. 


7.5 lbs. 


12 lbs. 

Third Order IMD at rated 

Output: 

-35 dB PEP or better. 

ALS-600SPS 


Specs: 

Line Input: 

120 VAC/240 VAC. 

Output: 50 VDC, 25 Amps, 

+/-14 VDC, 1 A. 

Metering: 

Cross-needle for volt/amp. 

Output Cable: 

6 foot prewired cable with 

Beau multi-contact connector 

to mate with ALS-600 amplifier. 

Dimensions: 

12Dx91 /2Wx6H inches. 


9 lbs.* 


15 lbs.* 

AC Line Connector: 

NEMA-5-15P. 

Note: 

* Total Shipping weight for 

ALS-600 Amplifier and ALS- 

600SPS power supply is 33 

lbs., shipped together. 

ALS-600 





continuous. 




1.5:1. 



100 Watts. 


100 Watts. 


low pass. 




Watts. 


amplifier: 

50 VDC, 25 Amps, +/-14 

VDC, 1 Amp. 


Power MOSFET (4) MRF- 

150. 

Metering: 

Amplifier-Cross-needle meter 

for VSWR, FWD, reflected 

true peak indicating wattmeter. 

ALC: 

Negative going 12 VDC, 

adjustable, RCA phono jack. 



crest) 55%. 


coverage. 

Keying: 

Relay closure or sinking to 

ground of +12 VDC at 100 

mA, RCA phono jack. 



mount. 



Dimensions: 

12Dx91 /2Wx71 /8H inches. 


12.5 lbs. 


18 lbs. (amp only). 


Output: 


ALS-600PS 

Power Supply 


Line Input: 

120 VAC/240 VAC. 


+/-14 VDC, 1 Amp. 

Metering: 

Cross-needle for volt/amp. 

Output Cable: 




Dimensions: 

12Dx91 /2Wx6H inches. 


32 lbs.* 


37 lbs.* 


NEMA-5-15P. 

Note: 


ALS-600 Amplifier and ALS- 

600PS power supply is 57 

lbs., shipped together. 

ALS-1300 





continuous. 




1.5:1. 



100 Watts. 


100 Watts. 


low pass. 



Typical CW operation: 

1000 Watts. 


amplifier: 

50 VDC, 50 Amps, +/- 14 

VDC, 2 Amps. 


Power MOSFET 

(8) MRF-150. 

Metering: 

Two Cross-Needle Meters for 

VSWR, FWD, REF true peak 

indicating wattmeter, ALC, 

high voltage PA1 and PA2. 

Constant current monitor PA1 

and PA2. 

ALC: Negative going 12 

VDC, adjustable RCA phono 

jack. 



crest) 55%. 


coverage. 

Keying: Relay closure or 

sinking to ground of +12 VDC 

at 100 mA, RCA phono jack. 



mount. 



Dimensions: 

18Dx10Wx6 1 /2H inches. 


22 lbs. 


27 lbs. 


Output: 


ALS-1300SPS 


Specs: 

Line Input: 

120 VAC@30 Amps 

220 VAC@14 Amps 


+/-14 VDC, 2 A. 

Output Cable: 




Dimensions: 

91 /2Dx10Wx61 /2H inches. 


15 lbs.* 


20 lbs.* 


NEMA-6-15P. 

Note: 


ALS-1300 Amplifier and 

ALS-1300SPS power supply 

is 49 lbs., shipped together. 


AMERITRON True Legal Limit TM Tuner 

Easily handles 1500 Watts continuous carrier even on 160 Meters . . . High-current edge-wound silver 

plated Roller Inductor . . . Two 500 pf high capacitance tuning capacitors with 6:1 vernier reduction 

drives . . . 3 core choke balun . . . Six position antenna switch . . . True peak reading Cross-Needle 

SWR/Wattmeter . . . 

• Handles well over 1.5 kW carrier 

• Super High Current edge-wound 

silver plated Roller Inductor 

• 500 pf tuning capacitors with 6:1 

vernier reduction drives 

• 3 core choke balun 

• 6 position antenna switch 

• True peak reading meter with 

LED Meter Light 

AMERITRON’s ATR-30 True Legal 

Limit TM roller inductor antenna tuner is ham 

radio’s toughest! It’ll handle 1500 Watts 

continuous carrier output on all modes and 

all HF bands into most antennas -- even on 

160 Meters where most antenna tuners fail. 

It’s perfect for Ameritron’s most powerful 

amplifiers where the ATR-30 just loafs. 

All band coverage lets you operate 1.8-30 

MHz including all MARS and WARC 

bands. 

Super High Current Roller Inductor 

You’ll see Ameritron’s new super high 

current air core roller inductor. It’s edge 

wound from a thick solid copper strip and 

silver plated. 

This produces a large surface area and a 

massive conductor. It can carry huge circulating 

RF currents and withstand tremendous 

heat that’ll melt or burn ordinary roller 

inductors. 

A gear driven turns counter and crank 

knob gives you precise inductance control. 

Two 500 pf Tuning Capacitors 

These precision, compact 

meters feature peak 

and average, forward and 

reflected power reading 

and SWR. 

Each model has different selectable 

power ranges. 

A highly visible black and red meter 

scale on a bright, white background makes 

it quick and easy to read SWR, Forward or 

Reflected power at-a-glance. 

Large 2 5 /8x1 1 /4” lighted meter Lamp 

requires 13.8 VDC or 110 VAC operation. 

SO-239 connectors with gold-plated center 

pins, all metal cabinet with rubber feet. 

Compact 6Wx2 1 /2H x4D inches. 

Choose from 3 models. 

Model 

AWM-20 

AWM-22 

AWM-24 

Precision Single Needle 

SWR/Wattmeters 

AWM-20 

$ 89 95 


Price 

$ 89 95 

$ 89 95 

$ 119 95 

Frequency 

1.6-60 MHz 

1.8-200 MHz 

1.8-525 MHz 

Power 

kW 

200 W 

200 W 

Power Ranges 

20/300/3kW 

5/20/200W 

5/20/200W 

ATR-30 

$ 599 95 


Two 500 pf -the 

highest of 

any antenna 

tuner -- variable 

transmitting 

capacitors give 

you no-arc wide 

range impedance 

matching for true 

high power performance. 

6:1 vernier reduction drives makes capacitor 

tuning smooth and easy. 

Super Balun, 6 position Antenna Switch 

Super heavy duty three core choke balun 

lets you match virtually any balanced feedline 

antenna without core saturation. 

A 6 position antenna switch lets you 

select your desired operating antenna. 

Read true Peak Power 

Ameritron’s active electronic true peak 

reading meter accurately reads forward and 

reflected power and SWR simultaneously on 

a super-bright LED lighted Cross-Needle 

meter. 

Roomy Cabinet maintains High-Q 

Roomy extra-strong .080 inch thick aluminum 

cabinet gives highest efficiency and 

lowest loss. 13 1 /4Wx5 5 /8 Hx17 1 /2 D inches. 

Legendary After-Sale Service 

Has Ameritron’s superb one year limited 

Fan Cooled 

Dry Dummy Load 

AMERITRON’s 2500 Watt fan cooled 

dummy load handles any legal limit amplifier, 

and lets you tune-up your expensive 

amplifier fast and super easy. Works with 

all amplifiers, transceivers and transmitters 

from DC through 6 Meters. 

It can dissipate 2500 Watts average 

power for one minute on, ten minutes off. 

Handles 300 Watts continuous. SWR is 

less than 1.25 to 1 below 30 MHz and less 

than 1.4 from 30 to 60 MHz. 

Four 50 Ohm non-inductive super high 

energy density resistors are used. Each has 

an incredibly high energy density of 7000 

joules per cubic inch per second with a 

voltage gradient of 10 kV per inch! 

Detailed specifications/power curve are 

permanently silk-screened on the cabinet 

for easy reference. Uses 12 VDC. 91 /2Dx81 ADL-2500 

$ 95 219 


/4 

Wx4H in. Has SO-239 connectors. 5 lbs. 

100 AMERITRON . . . The World’s High Power Leader 

warranty with legendary customer service. 

ATR-20 Antenna Tuner . . . 

ATR-20, $459.95. 

Handles 1.2 kW PEP SSB. Slightly less 

on 160 Meters. 13 1 /2W x5 1 /2H x13 1 /4D in. 

Roller inductor T-network, peak reading 

SWR/Wattmeter with super-bright LED. 

Covers 1.8-30 MHz, 6 position antenna 

switch, balun. 

Great for Ameritron’s widely popular one 

killowatt AL-80B Amplifier! 

Legal Limit Oil-filled 

Dummy Load 

ADL-1500X 

$ 54 95 

Without Oil. 


ADL-1500 

$ 95 74 

Oil included. 

AMERITRON’s Legal Limit oil filled 

dummy load lets you run the maximum 

legal limit of 1500 Watts for a full five 

minutes. 

ADL-1500 has high quality industrial 

grade transformer oil (no PCB) and heavy 

duty 50 Ohm resistor. 

AMERITRON’s Legal Limit oil filled 

dummy load gives you SWR under 1.2 to 

30 mHz and low SWR to 400 MHz. 

Durable, sturdy gallon can measures 

7 1 /2Hx6 5 /8D inches. Detailed specifications 

and power curve. 

Order ADL-1500 with industrial grade 

transformer oil. Order ADL-1500X without 

oil. 

ADL-21, $29.95. 1 Gallon Industrial 

Grade Transformer oil.

AMERITRON RCS-4 Remote Coax Switch 

Now covers 6 Meters . . . improved relays . . . Greater Power Handling! 

RCS-8V HF to VHF/UHF Remote Coax Switch 

Ameritron’s Remote Coax Switch lets 

you remotely switch up to five separate 

antennas using one inexpensive small control 

line (like standard telephone wire) -- 

Ameritron RCS-4 is a remote 

controlled coax switch that selects 

1 of 4 outputs by supplying all 

control voltages through the coax. 

Elimination of control cables gives you a 

fast, neat and inexpensive installation -- only 1 

coax line for 4 antennas. 

You get two units -- the switching box 

(53 /8Dx7Wx3H inches.) that can be tower, mast 

or wall mounted and the control console 

(61 /8Dx51 /4Wx 33 /8H inches.) that is located at 

your operating station. 

The attractive indoor console has bright LED 

antenna selector indicators. 

A steel enclosure provides 100% shielding to 

prevent RFI and TVI. 

Switching time is 50 milliseconds. Teflon (R) 

RCS-4 


SO-239 connectors provide reliable connections. 

The weatherproof switching box uses three 

RCS-8V 

$ 169 95 


Eliminate a tangle of troublesome 

coax and have a simple and neat 

installation -- with just a single feedline. 

The RCS-8V consists of two units -- the 

weatherproof switching box that mounts on 

your tower or mast and the control unit 

that’s placed at your operating station. 

VSWR is less than 1.2 from DC to 250 

MHz and less than 0.1 dB loss at 150 MHz -great 

for the HF/VHF/UHF operator. 

It handles over 5 kW below 30 MHz and 

1 kW at 150 MHz. You can ground unused 

positions or leave them open. 

The indoor control unit is all metal to prevent 

RFI and TVI. It also has LEDs to indicate 

the antenna you’ve selected. 

A Lexan scratch-proof panel has a markable 

surface for labeling your antenna positions. 

RCS-8V operates from a 120 VAC power 

source or RCS-8VX for 220/240 VAC. Use 

any 6 conductor control line (not supplied) 

and allows safe operation with 14V control 

voltage. 

RCS-8VN, $179.95. Same as RCS-8V but 

has N- type connectors instead of SO-239. 


Number of antenna positions: 5. 

Loss at 150 MHz: less than 0.1 dB. 

VSWR: under 1.2:1 from DC to 250 MHz. 

Impedance: 50 Ohms. Power Capability: 

>5 kW below 30 MHz, 1 kW at 150 MHz. 

Power requirements: 12 VDC @ 100 mA. 

AC adapter supplied. Connectors: Teflon (R) 

SO-239 for RCS-8V; “N” for RCS-8VN. 

Control Box: 6Dx6 1 /8W x2 1 /4H inches. 

Switch Box: 5 3 /8Dx7Wx3H inches. 

RCS-10 Remote Coax Switch with 8 positions 

RCS-10 with just a single coax feedline. 

$ 95 The RCS-10 consists of two 

179 units -- the weatherproof switch- 


ing box that mounts on your tower 

or mast and the control unit that’s placed at 

your operating station. 

Outdoor Unit Features: 

Inexpensive and simple wiring: selects 

up to eight antennas using one four conductor 

telephone type control line. 

High Power Capability: The RCS-10 

relay box will handle over 5 kW into 

matched loads below 30 MHz. 


Long Relay Life: UL/CSA/VDE 

approved sealed relays with 16 ampere 

switching current rating. Tested to withstand 

1200V RMS. Flexible Mounting: 

RCS-10 hardware accepts mast sizes from 

Ameritron’s RCS-10 remote coax 1 inch to 2 inches. Reliable Connectors: 

switch selects one of eight antennas using Teflon UHF-style SO-239 females, internal 

an inexpensive three or four conductor con- barrier strip for control lines. Low Voltage: 

trol line (such as standard telephone wire). Requires 10-15 Volts at less than 300 mA. 

Eliminate a tangle of troublesome coax Number of Antenna Positions: 8. 

and have a simple and neat installation -- Frequency Coverage: DC to 100 MHz. 

Lightning Protected 

model RCS-4L, 

heavy duty 16 ampere hermetically sealed relays 

on a rugged G-10 fiberglass circuit board. 

Quality components are used throughout the 

entire unit to ensure maximum life for the sometimes 

difficult-to-reach switching box. 

RCS-4 operates 120 VAC. RCS-4X for 

220/240 VAC. RCS-4 allows safe operation with 

14 Volts control voltage. 

Frequencies 1.5 - 100 MHz are covered by 

this excellent station accessory. Handles over 

2.5 kW. 


4 positions; Loss at 30 MHz less than 0.1 

dB; VSWR is under 1.25:1, 1.5-60 MHz; 

Impedance: 50 Ohms; Power: >2.5 kW average 

continuous. 

$ 19995 Lightning Protected 

model RCS-8VL, $ 209 95 

VSWR: Under 1.25:1 below 30 MHz; 

Under 1.3:1 below 60 MHz; Under 1.8:1 

below 150 MHz. 

Impedance: 50 Ohms. 

Power Capability: >5 kW into 50 Ohms 

below 30 MHz. 

Power Requirement: RCS-10, 10-15 VDC 

or 120 VAC with AC adaptor supplied. 

RCS-10X, 10-15 VDC or 230 VAC with 

AC adaptor supplied. Relay Switch 

Control Line: 4 conductors telephone-type 

cable, not supplied. Relay Control Line 

Voltage: 10-15 VDC at less than 300 mA. 

Flexible Control Box with External 

Interface: Accepts and outputs one-ofeight 

and outputs three-line BCD data to 

remote relay unit. Highly Weather 

Resistant: Sealed relays, stainless hardware, 

and U-V resistant cover. Easy-to- 

Read Antenna Indicators: Eight widespaced 

LED’s indicate the selected antenna. 

Size: Control Box:61 /4Wx31 /4Hx45 Lightning Protected 

model RCS-10L, 

/8D in. 

$ 219.95 

AMERITRON . . . The World’s High Power Leader 101

The RCS-12 is 

an automatic 

remote antenna 

switch. It reads 

AMERITRON Automatic Remote Antenna Coax Switch 

Automatically reads data from your transceiver and selects up to 8 pre-programmed antennas . . . 

RCS-12C 

$ 239 95 


information from the transceiver and 

selects the pre-programmed antenna 

automatically. Pro-gramming is as 

easy as a push of a button. It works 

with most Icom,Yaesu, Kenwood 

and other rigs that have a band data 

output line. It has a manual/automatic 

switch that will allow manual selection of 

antennas as well. It has eight LEDs to indicate 

which antenna is selected. 

RCS-12 stops expensive antenna switching 

damage. No HOT switching with the 

RCS-12! It's late at night, there's a run of 

stations going, and the operator pushes a 

button. SWR shoots up! Even if the SWR 

Watch Protection kicks in, you still lose 

your run frequency while you look to see 

what happened, if you notice at all! At best 

you only lose your run frequency; at worse 

you lose an amplifier or antenna switch. 

You've learned a painful lesson! The cost 

of a blown bandswitch or antenna relay 

pales in comparison to the price of a contest. 

You'll never know if this was your year 

because a split-second error turned you from 

a winner to a loser. It's another year before 

you can try again. 

With a properly connected and programmed 

RCS-12 it is impossible to pick 

the wrong antenna. It is impossible to damage 

equipment by switching antennas while 

transmitting. 

You no longer have to hover over guest 

AMERITRON EXTENDED WARRANTY PLAN 

Ameritron’s extended warranty plan is the 

same as the original warranty, just extended 

for the amount of months described on your 

purchase invoice. The extended warranty 

warrants to the purchaser that if the product 

should fail during the agreed term, Ameritron 

has the option to repair or replace part (s) 

except tube and output transistors) and provide 

necessary labor free of charge. 

Warranty repair can only be done at the 

Ameritron facility. 

Purchaser must return defective product 

to Ameritron prepaid in its original packing or 

equivalent. Ameritron is not re-sponsible for 

loss or damage due to shipping. 

WHAT IS COVERED 

Necessary labor done at Ameritron to 

repair the product back to specifications. 

Return shipping (within the United States at 

Ameritron’s choice of shipping) with insurance 

at replacement cost. 

WHAT IS NOT COVERED 

Repairs done by unauthorized Ameritron 

operators like a mother hen; RCS-12 will 

not let them make an antenna switching 

mistake. Ameritron’s RCS-12 is compatible 

with virtually any antenna switching system. 

It works with BCD or one-of-eight outputs, 

and is fully compatible with 12 or 24 volt 

relay systems. 

RCS-12 can handle directional control of 

two four-squares, or one four-square along 

with an assortment of other antennas. It can 

handle up to eight individual antennas. Any 

single position or combination of positions 

can be programmed for any particular band. 

The operator pushes an antenna selector button 

and the RCS-12 takes over. 

The RCS 12 monitors the amplifier keying 

line. It prohibits antenna relay transfers 

while your amplifier is active. Simultaneously, 

it remembers what antenna function the 

operator called for. It switches at the first 

amplifier drop. It holds the amp off until 

switching is complete and relays are settled. 

It monitors the band data from radios. 

The internal band decoder knows which 

groups of switch positions are allowed on 

each band. It prevents a distracted operator 

facility. Returning of product to Ameritron 

facility. Shipping and labor to replace light 

bulbs and fuses accessible by the owner. 

Parts damaged due to shipping damage. 

Parts damaged due to misuse, neglect, intentional, 

accidental or improper installation. 

Cosmetic defects, dents, scratches, peeling, 

rusting, corrosion and chips. Maintenance 

and cleaning. Flood, fire, lightning and any 

other act of nature. PA tubes and RF Output 

Transistors (shipping and labor are covered). 

Unauthorized modifications made to the 

product. Returning of product with no problem 

detected. 

Return shipping is NOT covered on 

products sent in for services listed under 

“What is NOT covered”. 

HOW TO ORDER 

If your Ameritron product is still within 

its original warranty, contact Ameritron by 

phone, fax, mail or email with model of 

product, serial number, date of purchase and 

dealer purchased from. 

For your nearest AMERITRON dealer: Call 1-800-713-3550 

For Technical Information or parts order: Call (662) 323-8211 

For service, return amplifier with letter of explanation to: AMERITRON, 116 Willow Road, Starkville, MS 39759, USA. 

All products manufactured by AMERITRON have a one year limited warranty. Ameritron’s AL-80B amplifier carries a two year limited warranty. *All transmitter 

tubes are warranted by the tube manufacturers. Prices and specifications subject to change without notice or obligation. *Except as noted. (c) 2013 AMERITRON. 

102 AMERITRON . . . The World’s High Power Leader 

from picking the wrong switch 

position. When the radio changes 

bands the RCS-12 goes to the last 

antenna used for that band. 

RCS-12 makes it impossible to 

put the radio on the wrong antenna. 

It’s impossible to switch 

relays while the amplifier is on, 

whether you are switching stacks, 

directions, or antenna arrays or 

any combination of the three. 

RCS-12 works with four-squares, stacking 

systems, directional arrays and other combos 

of up to 8 antenna selections. 

Measures 8 1 /4Wx2 1 /4Hx7D”. 1.5 lbs. 

RCS-12, $309.95 includes automatic controller 

and 8 position relay box. Covers DC 

to 100 Mhz and handles over 5KW @ 50 

ohm below 30 MHZ. Powered with 10- 

15VDC or with 120VAC adaptor, included. 

Order RCS-12X for 220VAC operation. 

RCS-12L, $349.95 RCS-12 with lightning 

surge protection. 

RCS-12C, $239.95. Automatic 

Controller only. 110VAC, compatable with 

RCS-8V/RCS-10 outdoor relay boxes. 

*Not compatible with Kenwood TS-480, 

or TS-2000 transceivers. 

RCS-12 to Rig pre-wired Cables . . . $24.95 

DB-13D 

DB-7DI 

DB-7DK 

DB-DB8MK 

DB-DBY 

DB-8MY 

DB-8MY2 

DB-8DY 

If your Ameritron product was purchased 

used or is out of its original warranty, the 

product will need to be sent to Amer-itron 

production facility prepaid shipping for 

evaluation. 

Call 1-800-713-3550. Use the chart 

(right) to order a one year or two year 

extended warranty plan. 

For full details of the warranty plan, contact 

Ameritron direct, 1-662-323-8211. 

Customer must 

contact the 

Ameritron fac- 

tory before shipping. 

Ship to 

address: 

Ameritron, 116 

Willow Road, 

Starkville, MS 

39759. 

For Icom 706, 7000, 718 rigs 

For Icom ACC 2 

For Kenwood TS-2000, 570, 870 

For Kenwood TS-480 

For Yaesu FT-847 CAT Port 

For Yaesu FT-847 Tune Port 

For Yaesu FT-897/857/100/817/840/890/990 

For ALL Yaesu rigs with 8 Pin CAT 

Amp 1 Year ext. 2 Year ext. 

Model # Warranty Warranty 

AL-1500 $129.00 $250.00 

AL-1200 $129.00 $250.00 

AL-82 $124.00 $240.00 

AL-572 $89.00 $160.00 

AL-80B $89.00 $160.00 

AL-800 $89.00 $160.00 

AL-800H $129.00 $249.00 

AL-811 $69.00 $129.00 

AL-811H $79.00 $149.00 

ALS-600 $69.00 $129.00 

ALS-500M $49.00 $95.00 

ATR-30 $29.00 $55.00 

AMERITRON is an authorized Eimac (R) Tube Distributor . . . 

•Taylor 3-500G - $219 • Eimac R 3CX1200A7 - $1995 • Eimac R 3CX1200Z7, $1595 • Eimac R 3CX1500A7/8877 - $1650 

• Eimac R 3CX800A7 - $998 • 811A - (1) - $24.95; (2 match) - $54.95; (3M) - $79.95; (4M)- $109.95 • 572B (1) - $59.95

Cushcraft 

Amateur Radio Antennas 

2013 Ham Catalog 

Peak Performance 

Beams,Verticals, 

Ringos and Yagis 

around the globe! 

www.cushcraftamateur.com 103

Cusshcraft 

Cushcraft R-6000 Multiband HF Vertical 

The Shape of Things to Come 

The R-6000 is a 6 through 20 meter, no ground radial antenna. It includes many 

of the features of the R8, R7 and R5 antennas. R-6000 means excellent performance, 

easy installation and use, slim silhouette and high reliability. There 

are no traps used on 6, 10 and 15 meters for maximum efficiency and power 

handling. 

• EASY INSTALLATION 

For typical use, tuning is not required 

• INSTANT BAND CHANGING 

To any band 6 through 20 Meters 

• SLIM SILHOUETTE 

Gain favor of family and neighbors with the 

slim, low profile of the R6000 

• 6 METER OPERATION 

Join the fun of the “Magic Band” and take 

advantage of the new HF/50 MHz transceivers 

• AFFORDABLE PRICE 

Cushcraft delivers the best quality and 

performance at a price no one else can match 

, 

R-6000 

The R-6000 employs quarter wavelength stubs on 10 and 15 Meters to replace 

standard trap coils. The result is lower loss and wider bandwidth. The R-6000 

covers all bands 6 through 15 meters at a VSWR under 2:1. On 20 meters you 

can select the top 300 KHz or bottom 300 KHz of the band. 

The R-6000 weighs only 12-1/2 pounds (5.6 kg). It is lightweight and easy to 

mount for portable or permanent installations. Machined aluminum clamps and 

UV stable insulators guarantee years of reliable service. The R-6000 comes 

with the standard warranty of one year from purchase - plus the industry’s leading 

technical support team stands behind each antenna. 

The R-6000 makes an excellent diversity antenna to complement even the most 

complete stations, or pack up the R-6000 for a trip to the DX location of your 

dreams. 

104 Cushcraft Amateur Radio Antennas 

R-6000 

$ 429 95 

6-20 Meters

Cushcraft R-8 Multiband HF Vertical 

, 

, 

R-8 

$ 539 95 

R-8 

6-40 Meters 

HF Multiband Vertical Antenna 

6, 10, 12, 15, 17, 20, 30, and 40 Meter 

This multiband vertical design provides 8 band coverage encompassing the 

6, 10, 12, 15, 17, 20, 30 and 40 meter bands. Cushcraft achieved a major 

breakthrough in the development of an HF multiband vertical antenna that 

has been specifically designed for use with a tuner and amplifier. As a 

result, the antenna more accurately addresses the needs of the contemporary 

ham shack. 

Multiband vertical antennas have always been complicated designs with 

components as likely to be damaged by high levels of mismatched transmit 

power as the rigs they are attached to. Before the use of tuners became 

widespread, the antenna was protected by the same safety mechanisms that 

protected the rig. Now, the automatic power reduction circuits of the past 

have actually become a second layer of protective circuitry. Although the 

auto-tuner provides the ham with a more versatile device as well as protecting 

the rig’s components, the antenna is more vulnerable than ever. With 

the press of a button, very high loads can be imposed on the antenna. The 

result to theantenna can be catastrophic failure in some instances. 

The R-8 is the first multiband vertical designed for the rigors of contemporary 

operating conditions. Although the antenna is best operated within it’s 

2.0:1 VSWR bandwidth,it can sustain a 3.0:1 VSWR mismatch at full 

power for typical operating intervals. Now radio amateurs can take full 

advantage of the versatility that a tuner used in conjunction with a multiband 

HF vertical antenna can give them. For high wind environments, add 

the R-8GK, $56.95 Guy kit-three point non-conductive guy system. 

• RUGGED CONSTRUCTION 

• INSTANT BAND CHANGING 

• SLIM, LOW PROFILE SILHOUETTE 

The R-8 provides 360 degree 

(omni) coverage on the horizon and 

a low radiation angle in the vertical 

plane for a better DX. 

www.cushcraftamateur.com 105 

- 

- 

CCusshcraft

CCusshcraft 

Cushcraft Restricted-Space HF Verticals 

MA-5VA Five-Band Restricted-Space 


The MA-5VA delivers superb HF multi-band performance while maintaining 

a neighbor-friendly low profile. Perfect for roof-mounts, patios, small 

backyards, condos, and motor homes, this 6.5-pound bantam-weight 

installs quickly without the “heavy lifting” required of larger antennas. 

Whether you install it permanently or take it down between operating 

sessions, you’ll appreciate special features like the MA-5VA’s gust-absorbing 

fiberglass base, resin-sealed resonator coils, aluminum mast blocks, and 

all-stainless hardware. Best of all, the MA-5VA is solidly engineered-its 

“no-radial” OCFD design delivers low SWR and high performance without 

using exotic matching networks or tuners. Simply connect a radio and 

you’re ready to work the world! The MA-5VA is the perfect restrictedspace 

DX solution for 20, 17, 15, 12, and 10 meters! 

• Light-weight rugged construction 

• Rapid breakdown for storage or transport 

• No exotic matching networks or tuners 

• Advanced “no radial” OCFD design 

MA5V6M, $49.95. Six Meter Add-on Kit for MA5VA. 

, 

- - 

MA-6VA Six-Band Restricted-Space 


Made for today’s expanded-coverage radios, Cushcraft’s MA-6AV provides 

the same great versatility and performance of the MA5VA- with the addition 

of 6 Meters. Enjoy congestion-free FM-repeater operation and explore 

the world of exotic seasonal band openings on 50 MHz CW and SSB. It’s a 

great way to add amateur radio’s “magic band” to your operating repertoire! 

• Neighbor-friendly low profile 

• Rugged light-weight construction 

• Air-baggage transportable 

(longest tube is 54”) 

• Robust mounting hardware 

included 

• New bandwidth enhancing 

8-rod counterpoise 

• New low loss balun 

106 www.cushcraftamateur.com 

MA-5VA 

$ 299 95 

MA-6VA 

$ 339 95 

6-20 Meters

Cushcraft Compact HF Multi-Band Beam 

The MA-5B, Compact HF Multi-Band Beam 

Small Footprint -- Big Signal 

MA-5B, Cushcraft’s multiband HF antenna provides 5-Band operation in a package 

small enough to mount to a tripod. The MA-5B is a design that does not sacrifice 

ruggedness, performance and power handling for size and ease of installation. 

, 

Cushcraft Low Frequency Verticals 

MA-8040V 3.5-7.3 MHz Vertical Antenna 

MA-8040V, is a compact self-supporting HF vertical that delivers excellent 

DX-hunting performance on 80 and 40 Meters. Only 27 feet tall and weighing in at 

less than nine pounds, it is small and light enough for one person to handle easily 

without assistance. Once installed, the MA-8040V virtually disappears against a 

backdrop of trees and foliage. Parallel resonators use a combination of inductive 

and capacitive top loading to deliver automatic band switching, high efficiency, and 

rock-bottom SWR on both bands. Designed to handle maximum legal power and 

built to last year after year, it’s the perfect DX solution when the sunspots silence 

the higher bands. Radial kit included. 

MA-160V 160-Meter Vertical Monopole Antenna 

MA-160V is a compact efficient vertical especially designed for working top-band 

DX from an average-size house lot. A low launch angle and deep overhead null 

combine to pull in distant stations while rejecting local QRM. The MA-160V 

features a heavy-duty high-Q copper loading coil plus a wide 100-inch diameter 

stainless capacitive hat for high efficiency, resiliency and 1500-Watt power handling. 

An adjustable stinger provides coverage on any 40-kHz segment across the 1.8 2.0 

MHz band. Weighing only 12-pounds, the MA-160V installs easily and blends in with 

backyard trees and vegetation. Each antenna comes with a 400-foot spool of 

ground-radial wire plus a Danscord insulated guying kit. 

- - 

- 

MA-5B 

$ 499 95 

10-20 Meters 

High Front to 

Back Ratio on 

10/15/20 M 

160 and 80/40 Meters 

MA-8040V 

$ 319 95 

MA-160V 

$ 299 95 


Cushcraft

Cusshcraft 

Cushcraft HF Yagis and Log Periodics 

X-7 BIG THUNDER TRIBANDER YAGI 

The X-7 Triband Yagi is geared to set new standards in both radiating 

performance and mechanical reliability. The product development team 

has employed the latest computer modeling technology to achieve a superior 

electrical design as well as elegant new mechanical hardware and 

assembly techniques. Each mechanical component was designed to 100+ 

MPH wind survival with a 1.25 safety factor. Traps were eliminated from 

the high current driven elements and reflectors using the new 4L Log Cell 

design, which yields virtual monoband performance and maximum power 

handling capability. Traps are employed only in the lower current directors 

for increased gain and sharper pattern. The result is a truly high performance 

antenna which will easily handle the legal limit. 

• New High Efficiency Computer Optimized Design for 

Maximum Gain and Ultra Clean Radiating Pattern 

• 100+ MPH Construction for Best Reliability and Long Life 

• NEW 4L Log Cell Driven Elements for better 

VSWR Bandwidth 

• Trapless Driven Elements and Reflectors for 

Reliable Power Handling 

, 

X-740 

40 Meters 

1 

2 

30 

100 KHz 

41 (12.5) 

20.0’ (6.09) 

18’ (5.48) 

9.9 (.92) 

1500W 

80 (36.3) 

- - 

LOG PERIODIC Skylog ASL-2010, 13 - 32 MHz 

The ASL-2010 log periodic antenna is the most cost effective, 

high gain, five band antenna solution on the market today. 

Skylog offers continuous operation from 13.5 to 32 MHz. 

Antenna gain and beamwidth are constant for uniform coverage 

from 10 through 20 meters. The ASL-2010 is rated for 

continuous duty at full legal power. Skylog is designed for 

maximum gain on a manageable 18 foot boom with only 10.1 

square feet of wind surface area. All stainless steel hardware 

and rugged element design are only some of the many features 

that provide years of superior antenna performance. Skylog 

ASL-2010 is the smart choice for multiband HF operation. 

• Continuous five band coverage 13.5-32 MHz 

• Constant over entire frequency range 

• 6.4 dBi gain, 65 degree beamwidth 

• 18 foot boom and 19.5 foot turning radius 

• High efficiency design, antenna stays cool and VSWR steady 


10-20 Meters 

X-7 

$ 1099 95 

40-Meter Add-On Kit 

for X-7 Antenna 

X-740 

$ 369 95 

Add this X-740 kit to 

your X-7 antenna to get 

40-Meter coverage. Stepby-step 

instructions, quick 

and easy modification for 

more band coverage. 

ASL-2010 

$ 999 95

Cushcraft VHF/UHF Yagis Cushcraft HF Monobander 

6-2 Meters, 440 MHz 40 Meters 

A6270-13S 

$ 279 95 

A6270-13S 6 Meter / 2 Meter / 70 CM 

Cushcraft’s multiband directional yagi is designed to provide 

hobbyists who have limited tower or mast space with 

directional antenna performance on three of the most popular 

bands. The A6270-13S combines 6 meters, 2 meters and 

70 centimeters on one boom. The 2m and 70cm interlaced 

Yagis are designed to share a common feed line. An indepedent 

feed line drives the 6m portion. 

• Outstanding performance thanks to 

Cushcraft’s unmatched multiband design 

technology and experience. 

• Rugged stainless steel mounting hardware 

is easy to install and maintain. 

, 

New! 

Cushcraft’s SQUALO is a full 

half-wave, horizontally polarized omnidirectional 

antenna. Outstanding allaround 

performance is achieved 

through a 360 degree pattern with no 

deep nulls. The square shape allows 

full electrical length in compact dimensions. 

Direct 52 Ohm Reddi-Match 

XM-240 

$ 999 95 

XM-240 Big Thunder Monobander 

Cushcraft’s XM-240 monobander utilizes rugged Big 

Thunder hardware that combined with high strength aluminum 

tubing affords the antenna outstanding wind survivability. 

Phillystran boom trusses are used in the XM-240 

design for extra boom stability. The unique feed system 

is a 50 ohm direct feed VSWR is flat across the band. A high 

power 1:1 balun is included. The XM-240 is field-proven or 

reliability and performance. Excellent front-to-back ratio and 

gain makes the XM-240 the right choice for DX and for 

stacking as well. 

Element Hardware 

Boom-to-Mast 

Cushcraft 6-Meter & HF“SQUALO”Antennas 

Cushcraft 

ASQ-6 

$ 139 95 

feed provides ease of tuning and 

broad band coverage. Squalo is well 

suited for horizontally polarized 

mobile or fixed operation on SSB, CW, 

and legacy AM. The omni-directional 

pattern is great for DX beacons and 

spotting, and elements may be stacked 

for added gain. Squalo is completely 

universal for mounting anywhere. 

Packaged with rubber suction cups and 

magnets for vehicle top mounting for 2 

and 6 Meters and a horizontal center 

support for mast 

or tower mounting. 

The 10, 15, Mast-mounted Squalo 

and 20 Meter models are designed for 

mast/tower mounting Squalos are ideal 

for net-control, monitoring or as a general 

coverage antenna. Minimum SWR. 

Handles 200 Watts PEP CW/SSB. 

Model # 

ASQ-2 

ASQ-6 

ASQ-10 

ASQ-15 

ASQ-20 

Band 

2-Meter 

6-Meter 

10-Meter 

15-Meter 

20-Meter 

Size (LxW) 

10x10 inches 




100x100 in. 

Price 

$119.95 

$139.95 

$159.95 

$189.95 

$229.95 


Cushcraft

CCusshcraft 

Cushcraft Multiband HF Yagis 

A-4S Four Element Beam - 10, 15 & 20 Meters 

A-4S is the true, high performance tribander. Precisely tuned high-power 

traps, carefully selected element lengths, and proper spacing combine to 

make the A-4S the preferred antenna for your HF work! This is the premium 

antenna with all the features that you want. High gain, low SWR, 

and wide bandwidth keep the contacts coming in. All U-bolts, clamps and 

hardware are stainless steel. A-4S has pinned boom sections and formed 

aluminum brackets to keep elements straight in all conditions. Our solid 

construction keeps the A-4S on the tower! Add 40 meters with A744 kit. 

A-3S Three Element Beam - 10, 15 & 20 Meters 

A-3 World Ranger, our top selling tribander, has become the A-3S with 

all stainless steel hardware. It’s a real power-house in a small 

space and lets you work the pile-ups with confidence. All you 

need is a lightweight tower and rotator to enjoy the benefits of 

the A-3S. It’s a proven performer in DX-peditions and contests. 

Handles full power from your amp.Construction features 

include pinned boom sections, heavy duty element 

clamps with backing plates plus all stainless steel hardware. 

When space is a premium, but you want benefits of a full-size 

tribander, A-3S is right for you! Add 40M with A743 kit. 

A-3WS WARC Bands 3 Element, 12 & 17M 

Enjoy the excitement of the WARC bands with this popular 

beam. A-3WS gives full performance on 12/17 meters. 

With the addition of our easy-to-use A-103 add on kit, it 

will also cover 30 meters. A-3WS needs only a lightweight 

tower and rotator or mount it above an existing tribander. 

Construction features include pinned boom sections, heavy 

duty element clamps with backing plates plus all stainless 

steel hardware. 

30/40M Add Kits for A-3S/A-4S/A-3WS 

40 meters will come alive by adding one of these kits to the 

dipole of your A-3S or A-4S. Kits include high power traps with 

heavy wall fiberglass insulator and all hardware. A simple adjustment 

allows 30 meter operation. For our newest beam, the A3WS, 

we have a 30 meter add on kit, the A-103. 

A-743, $199.95. 7 MHz/10 MHz kit for A-3S; 

A-744, $199.95. 7 MHz/10 MHz kit for A-4S; 

A-103, $199.95. 10 MHz kit for A-3WS. 


10 - 40 Meters 

A-4S 

$ 699 95 

A-3S 

$ 599 95 

A-3WS 

$ 499 95 

Rotatable Dipoles The World Ranger Dipoles give bi-directional patterns and rotatable convenience. You can 

mount them high and away from the trees for better performance than a wire dipole. These single and multi-band dipoles 

feature high-performance traps, heavy wall tubing, and 

$ $ $ $ rugged hardware for years of enjoyment. 

399.95 419.95 369.95 369.95 

D-3W 

$ 369 95

Cushcraft Dual Band Ringos & Yagis 

AR-270B 5.5/7.5 dB Dual Band Ringo 

This model gives very high gain with a low angle of radiation 

and it is only 7.7 feet (2.35 m) high. The AR-270B is computer 

optimized with two 5/8 wavelength collinear elements on 2 

meters and four 5/8 wavelength elements on 70 cm. It is broadbanded 

for minimum SWR on both bands. It is easy to assemble 

with three rugged aluminum tubing sections, a durable mast 

mount and factory sealed coils for best performance. 

AR-270 3.0/ 5.5 dB Dual Band Ringo 

The “Dual Wonder”AR-270 is only 3.75 feet(1.1 meters) high. 

It has great performance for its size, making it the most popular 

2m/70 cm base antenna. 

A270-10S and A270-6S 

10 and 7.8 dB Dual Band Yagis 

Increase your range by selecting one of the new Cushcraft dual band Yagis 

on 2 meters and 70 cm. You can point the antenna at stations while you 

are in QSO with them. This will direct more of your output power when 

transmitting at the same time reducing interference and increasing signal 

strength when receiving. These antennas are perfect for packet applications. 

Assembly is a snap with our fully illustrated assembly manuals. 

AR-270B 

$ 189 95 

A270-10S 

$ 169 95 

2M/440 MHz 

A270-6S 

$ 129 95 

AR-270 

$ 129 95 


CCusshcraft

CCusshcraft 

Cushcraft Ringo Ranger 

Ringo Ranger II, Ringo Ranger, Ringo 

Ringo Ranger II 

The Ringo Ranger II has more gain, less windload, and more 

mechanical integrity than other two meter antennas. You’ll 

quickly appreciate the benefits of this amazing antenna! Based 

on the original W1BX Ringo, the Ringo Ranger II is the latest 

design featuring three 5/8 wave radiating elements and an 

adjustable 1/8 wave phasing stub. The result is a very low 

angle of radiation over your coverage area. The Ringo Ranger 

II has built-in lightning protection, UV-stabilized insulators, 

heavy wall tubing, improved decoupling radials to eliminate 

feedline radiation, and all-weather performance. 

135-160 

>6 

5.5 

1000 

16 

360 

5 (12.7) 

12.5 (3.8) 

1-1.25 

(2.54-3.2) 

.33 (.03) 

4 (1.8) 

13.1 (33.7) 

Ringo 

These are the original W1BX F M Ringos. If you want a combination 

of compact size, wide bandwidth, a low radiation angle, these economical 

antennas are just for you. Since radials are not needed, you 

can even use our Ringos indoors. Our Ringos are 1/2 wave and 

include built-in lightning protection. Put up one of these easily 

installed antennas and start enjoying FM! 


2 Meters, 220/440 MHz 

.2 (.02) 

ARX-450B 

$ 99 95 

ARX-220B 

$ 114 95 

AR-450 

$ 47 95 

ARX-2 

$ 79 95 

AR-2 

$ 64 95 

AR-6 

$ 99 95 

ARX-2B 

$ 109 95 

AR-10 

$ 109 95

Cushcraft VHF/UHF Yagis 2 Meters, 220/440 MHz 

A148-20T 

2 Meter Hi-Lo Cross Yagi 

Here’s the antenna that solves multi-mode problems! 

Ten vertically polarized and ten horizontally polarized 

elements provide 11.1 dBi gain covering 144- 

148 MHz. The horizontal elements handle your CW 

and SSB needs, while the vertical elements cover 

FM. Hardware is stainless steel. Separate coax feeds 

allow polarization changes. 

A224WB 

220 MHz Widebands 

This 222 MHz 4 element beam is perfect for 

Packet, FM repeaters, or sideband/CW. It can 

be mounted for vertical or horizontal polarization. 

A 

A-224WB 

$ 99 95 

A449-6S/A449-11S 

440 MHz Beams 

Use one of these 440 MHz 

beams for yourFM/Packet 

needs. Both work great for vertical 

or horizontal polarization. 

A449-11S 

$ 119 95 

A $ 249 95 $ 119 95 $ 79 95 $ 119 95 

A148-20T 

$ 219 95 

A449-6S 

$ 79 95 

A-719B 

$ 249 95 

A719B 

FM, CW and 

SSB 15.5 dBi 

Looking for an antenna to enhance 

performance on all modes of the 70 

CM band? The 13.5 foot long 719B 

is the right choice. Mount it vertical 

for FM or horizontal for CW and 

Sideband. The A-719B joins the 2 

meter A-13B2 as a classic for 

improved performance. 


Cushcraft

Cusshcraft 

Cushcraft Boomer Sideband VHF/UHF Yagis 2 Meters 

A13B2 -13 Element Wideband Boomer 

The A13B2 is as versatile as the A-17B2 is specialized. A13B2 will be your choice 

for high performance across the entire 2 meter band. New and experienced hams 

will enjoy 15.8 dBi gain on FM, packet, CW, or sideband across the 4 MHz operating 

range. The A13B2 is easily mounted vertically or horizontally for maximum 

performance on your favorite mode. Its optimum boom length makes it a popular 

antenna that fits just about anywhere. The new UltraMatch balanced feed on the 

A13B2 provides a 50 Ohm match via a standard SO-239 UHF female connector. 

Model A13B2N has N connector. 

A17B2 - 17 Element CW/SSB Boomer 

The serious two meter operator who is interested in EME, aurora, scatter, SSB, CW, 

tropo etc, will choose the A17B2. It has 17 elements on a 4.5 wavelength boom. 

Our computer-aided design supported by precise test range data and the latest manufacturing 

technology gives you a cleaner pattern and 18 dBi gain in this long 

boom design. Significant enhancement is provided by the new UltraMatch balanced 

feed system with N-connector. 

The UltraMatch is a modified T-match system that provides a 

balanced current distribution on your Boomer. It uses UltraLink 

TeflonR dielectric cable allowing for low loss high power applications. 

UltraMatch is completely enclosed for weather proofing. 

UltraMatch features an N-connector on the A17B2 and UHF 

SO239 on the A13B2. When all-weather performance is important, 

you will choose the new UltraMatched Boomers everytime. 

A26B2 - 26 Element Wideband Boomer 

This antenna offers the highest gain of any 2 meter FM antenna in the world. The 

A26B2 includes 2 complete A-13B2 antennas, stacking boom and phasing harnesses. 

A124WB - 4 Element Wideband Boomer 

A124WB 

This is the right choice for packet systems and other appli- $ 95 109 cations requiring a dedicated directional antenna. 

A148-10S & A148-3S 2M Yagis 

These antennas are the newest computer optimized models 

of our 2 meter Yagis. We have improved both the pattern 

and gain to give you better FM coverage. The A148-3S is 

the low priced quality leader for Packet, FM or even portable use. It is easily rear 

mounted. A148-10S is one of our best value designs with excellent gain and frontto-back 

ratio. Use it for long range FM or full band 2 meter operation. 

A 

Power Divider Harness for Boomers 

Our power dividers make it a snap to stack Cushcraft Boomers. Just 

add equal lengths of 50-Ohm coax to each 

PD-4 

of the antenna feed points. 

PD-2, $69.95. For two A13B2 beams. 

PD-4, $89.95. For four A13B2 beams. 

PD-2 

PD-2N, $79.95. For two A17B2 beams. 

PD-4N, $99.95. For four A17B2 beams. 


A 

A 

A 

A13B2 

$ 249 95 

A148-10S 

$ 139 95 

A17B2 

$ 369 95 

A26B2 

$ 599 95 

A148-3S 

$ 69 95 

Stacking Kits for Cushcraft Boomers 

Make stacking your Cushcraft Boomers easy. Choose the Boomer 

Stacking Kits for your installation. Each stacking kit includes: 

Stacking Aluminum boom, Power Dividers wire harness and mounting 

hardware. 

Order P/N: A26B2-VPK, $169.95 for two A13B2 Boomers. 

Order P/N: A26B2N-VPK, $189.95 for two A17B2 Boomers. 

Order two kits for stacking 4 Boomers.

Cushcraft 6 and 10 Meter Yagis 

6 Meter Yagis - SSB/CW/FMI 

Computer-aided modeling and test range techniques were used by 

Cushcraft engineers to further optimize the performance of our popular 

6 meter Yagis. This process means more gain and cleaner patterns with 

excellent front-to-back ratios. S-models have very broad bandwidth so 

they will not detune in bad weather. They feature stainless steel hardware 

for long trouble-free life. Enjoy the new popularity and exciting 

contacts on the 6 meter band with one of the S-series Laird Yagis. The 

A50-3S, A50-5S and A50-6S may be mounted vertically for FM use. 

A50-5S 

$ 199 95 

TEN-3 10 Meter Yagi 

Looking for a lightweight, economical alternative 

to the 10 meter big boys? Choose the TEN-3. 

Although it’s popular with novices and technicians, 

this antenna is for any ham who wants more 

gain with a good front to back ratio on 10 meters. 

This antenna has an 8 foot boom (2.4m) making it 

easy to install on a very simple mount with only a 

light rotator. The matching system is our proven 

Reddi-Match for 50 Ohm no balun feed and SO- 

238 connector. Make more positive contacts with 

the TEN-3. 

A50-6S 

TEN-3 

$ 299 95 

A50-3S 

$ 139 95 

6-10 Meters 

A50-6S 

$ 399 95 

Cushcraft Amateur Information 

Cushcraft antennas are designed to survive 80 MPH 

winds unless otherwise noted. Stainless steel hardware 

and high-grade seamless 6063-T832 tubing are used in 

all antennas. Cushcraft antennas are distributed by many 

fine dealers worldwide. For dealers in the USA, Canada 

and other countries, please contact Cushcraft. 

Sales: Cushcraft Amateur Antennas, 308 Industrial Park 

Road, Starkville, MS 39759 USA. 

Phone: 662-323-5803. Fax: 662-323-5803. 

Email: cushcraft@mfjenterprises.com 

Warranty: Cushcraft antennas carry a one year limited 

warranty. 

Information: Visit our website: cushcraftamateur.com 

for additional information. FREE download of 

Instruction manuals. 

Service: Return product to: Cushcraft Antennas, 308 

Industrial Park Road, Starkville, MS 39759 USA. 

Replacement Parts: To purchase or obtain warranty 

replacement parts, contact the Cushcraft factory at above 

address and phone/fax numbers. 


CCusshcraft

Genuine Hy-Gain Rotator Replacement Parts 

Rotator Potentiometer 

This potentiometer fits Hy-gain T2X, HAM-II, III, 

IV, V, and CD45II Hy-gain rotators. Has silver plated 

contact point that makes for smooth traveling, longer 

RPM-1 

$ 39 95 

lasting and more reliable contact between pot strip and wiper 

arm. RPM-1, $39.95 500 Ohms, for most Hy-gain rotators. 

RPM-2, $39.95. Same as RPM-1, 1000 Ohms for AR-40. 

5-Second Brake Delay Kit 

Allows automatic 5-seconds brake delay for your 

Hy-Gain rotator. This delay insures that the rota- 

Motor Capacitors/Meters/Fuses Rotator Connectors 

A B C D E F 

Figure 

A 

B 

C 

C 

D 

E 

F 

F 

Figure 

A 

B 

Part No. 

5151501 

5094300 

5147702 

400-2678 

5089501 

355-2678 

5056300 

755-0103 

(1034403) 

Part No. 

5146510 

870852 

Price 

$7.60 

$13.80 

$56.70 

$26.40 

$1.43 

$1.95 

$1.44 

$0.40 

Price 

$12.95 

$49.95 

Description 

Motor start Capacitor for CD45, HAM-II, III, IV, V, T2X 

Motor start Capacitor for AR40 Rotator. 

Panel meter for CD45/HAM-IV, T2X with “North” scale. 

Uses external meter lamp. 

Meter with internal lamp for “Plus” series CD45, HAM- 

IV, T2X, had “North” scale. 

Incandescent light bulbs, 28 V for controller with external 

meter lamp. Bayonet base. 

Incandescent light bulbs, 28 V, for “Plus” controller meter 

with built-in lamp. 

1/8 Amp meter circuit fuse. For CD-45, HAMIV, T2X. 

For HAM-III, HAM-IV, T2X, 3 Amp power fuse for 

CD45, Ham-II, III, IV, V, T2X 

Description 

8-screw terminal board. Fits CD-45II, HAM-II, HAM-III, 

HAM-IV and T-2X. Also replaces 4 screws terminal 

board for AR-40. 

8-Pin AMP circular connector cable conversion kit. 

Convert 8-Pin terminal board to 8-Pin AMP water tight 

circular connectors cable assembly. Easy, detachable, 

Secured twist-and-lock. Fits CD-45II, HAM-II, HAM-III, 

HAM-IV and T-2X. 

A B C D E F G H I 

Figure Part No. Price 

Description 

A 

A 

BCCC 

D 


5137000 

5011800 


5142310 

5042610 


$11.66 Mast Mounting plate for HAM-IV, 3/16” Zinc plated steel. 

$14.96 Mast mounting plate for T2X, 3/16” Zinc plated steel. 

$8.78 Mast mounting plate for CD45II/AR40. 3/16” Aluminum. 

$9.66 HAM-IV (2 sets) U-bolt with nuts, lock wasters. Stainless. 

$11.04 T2X (2 sets) U-bolt with nuts, lock washers, Stainless. 

$11.80 CD45II & AR40 (4 sets) U-bolt with nuts, lock washers, 

Zinc plated steel. 

$26.20 HAM-IV Rotator mounting kit, complete with mast plate, 

2 sets U-bolts, nuts & bolts, 4 each tower mounting bolts. 

E 5142210 $39.10 T2X Rotator mounting kit: mast plate, 2 sets U-bolts, nuts 

and bolts, 6 each tower mounting bolts. 

F 5042510 $32.80 CD-45II, AR40 Rotator mounting kit: mast plate, 4 sets Ubolts, 

nuts and bolts, 4 each tower mounting bolts. 

G 5142510 $ 43 SET 15 / T2X rotator to tower stainless mounting bolts/washers (6). 

H 5141810 

$ 65 SET 7 / HAM/CD45/AR40 rotor to tower mounting bolts/washers (4). 

I 5105700 

$ EA 0.49/ Rotator bottom casting to top bell housing mounting bolts. 

A 

Figure 

B 

Part No. Price 

C D E 

Description 

F G 

A 5037406 $59.95 Rotator Motor CD-45II and AR-40. 

A 5137600 $69.95 Rotator Motor for HAM-IV and T2X. 

B 5009900 $47.68 Brake Solenoid for HAM-IV and T2X. 

C 5136101 $12.35 Ring Gear, Steel, for HAM-IV and T2X. 

C 5031310 $8.40 Ring Gear, Aluminum cast for CD-45II and AR-40. 

D 

E 


5010700-1 

$12.50 Limit Switch Assembly for all Hy-Gain Rotators. 

$16.40 Spur Gear, Stainless Steel, HAM-IV, T2X, Require 2 per 

rotator. 

F 5011200-1 $33.40 Gear/Pinion Assembly, Stainless Steel, has short pinion, 

HAM-IV, T2X, Require 3 per rotator. 

G 5011100-1 $30.44 Gear/Pinion Assembly, Stainless steel, has long pinion, 

HAM-IV, T2X. Require 1 per rotator. 

116 

Silver plated 

Contact Point 

Terminal board & Pigtail cable conversion kits 

A B. 

Rotator Mast Plates and U-Bolts 

Motors/Ring Gears/Gears/Solenoid 

RBD-5 

$ 29 95 

tor is fully stopped before the brake is engaged. Avoid accidentally 

engaging the brake while the rotator is in motion. For use with 

HAM-II, HAM-III, HAM-IV, HAM-V, and T2X rotators. Easy to install inside 

the controller. Kit includes pre-assembled PCB & mounting hardware. 

A B C D E F 

Part No. Price 

Description 

870597 $19.95 8-Pin Amp Circular Female Connector Kit (connector 

shell and 8 female pin) for T2X. 

B 870596 $14.78 8-Pin Amp Circular Male Connector Kit (connector male 

and 8 male pin) for T2X. 

650082 $0.96 Amp Circular Connector Female Pin 

650083 $0.78 Amp Circular Connector Male Pin 

640076 $6.36 Rotator Controller Chassis Mount Female 8-Pin Jones. 

640077 $6.72 Rotator Controller 8-Pin Male Jones Chassis Plug. 

Figure 

A 

C 

D 

E 

F 

Figure 

A 

B 

B 

C 

D 

Part No. 

878-1608 

13-8075-T2 

13-8100-T2 

13-8125-T2 

13-8150-T2 

13-8006-T2 

MSHD 

MSLD 

Price 

$1.10 ft. 

$166.60 (75’) 

$206.95 (100’) 

$247.30 (125’) 

$287.65 (150’) 

$55.13 

$109.95 

$69.95 

Description 

8 conductors PVC cable, 6 conductors 18 

AWG plus 2 conductors 16 AWG. For Hy-gain 

rotator with 8 wire connections. 

Pre-assembled cable for T2X. Wired one end 

with Jones male connector and one end with 

AMP circular female. Water tight connectors 

with Twist-and-lock for secure connection. 

Other lengths not listed are available. 

Bench Test Cable for T2X. 6 ft. pre-wired assembly. 

8 pin Jones male to 8 pin AMP female. 

Heavy duty mast support for T2X, HAM-IV, 

HAM-V. Accepts 1 7 /8-2 5 /8” OD. Centers on 2 1 /2” 

Light duty mast support for CD-45II, AR-40. 

Accepts 1 7 /8-2 5 /8” OD. Centers on 2 1 /2”. 

Ball Bearings/Shim/Brake Wedges/Low Temp Grease 

A B C D E 

Figure 

A 

B 

A+B 

C 

D 

D 

E 

Rotator Cables & Mast Supports 

A B C D 

Part No. 

5033502 

5011300 

5131000 

5039700 

380828 

5151401 

5149710 

Price 

$5.50 

$5.14 

$9.95 

$4.87 

$14.52 

$15.60 

$12.77 

A +B 

Replacement Rotators 

and Controllers 

Description 

Ball Bearings (50 pack) 

Ball Bearing Retainer, 49 slots. Require 2 pieces for 

HAM-IV, CD-45II and 3 pieces for T2X. 

Kit includes one bearing retainer and 50 ball bearings. Requires 

2 kits for HAMs, CD45II & AR40 and 3 kits for T2X. 

Rotator Bottom Shim for HAMIV. 

Brake Wedge for all HAM rotators. Stainless steel. 

Brake Wedge for T2X. Stainless steel. 

Low Temperature Rotator Lubricant, 1 ounce. 

A B C D E F 

Figure Part No. Price 

Description 

A 

A 

5140301 

5156500 

$329.95 HAM-II, III, IV & T2X Controller. Supplied with 8-pin 

Jones male chassis mating connector. 110 VAC. 

$259.95 CD-45II Controller. Supplied with 8-pin Jones male 

chassis mating connector. 110 VAC. 

B 

C 

D 

E 

5172600 

878712 

5137701 


$169.95 AR-40 Controller, 110 VAC. 

$499.95 HAM-II, III, IV Rotator with 8-pin Jones pigtail 

male connector. Complete with mounting kits, (5141510). 

$599.95 T2X Rotator with AMP circular male connector. 

Complete with mounting kit (5142210). 

$249.95 CD-45II Rotator with 8-pin terminal board. Complete with 

mounting kit (5042510) Lower mast support not included. 

F 5084800 $179.95 AR-40 Rotator. Complete with mounting kit (5042510). 

Lower mast support not included. 

Hy-Gain can repair or rebuild your rotator. 

Call Hy-Gain for quote & other replacement parts not listed. 

1-800-973-6572. email: hygain@mfjenterprises.com

hy-gain’s PATRIOT HF vertical antennas are the best built, best performing 

and best priced multiband verticals on the market today. Make 

full use of your sunspot cycle with PATRIOT’s low angle signal. 

Instead of typical traps, hy-gain’s resonators are placed in parallel not 

in series. End loading of the lower HF bands allows efficient operation 

with a manageable antenna height. 

Introducing the new Hy-Gain PATRIOT-PLUS AV-680 

with a fully tunable 3.5-4.0 MHz coverage! 

With the AV-680, you get the same great traditional performance of 

the AV-640 on 6 through 40 Meters plus top-to-bottom capability on 80 

and 75 Meters. 

It's a great way to join new local nets and roundtables, explore the 

75-Meter DX window, or add exciting digital frequencies to your 

operating repertoire. 

Simply pick the band segment you wish to use, set the 80/75 Meter 

resonator, and you're in business. 

• No ground or radials needed -- Effective counterpoise replaces 

radials, end fed with broadband matching unit. 

• Automatic bandswitching -- Single coax cable feed, each band is 

individually tunable, wide VSWR bandwidth. 

• Sleek and low-profile -- Low wind surface area, small area required 

for mounting, mounts easily on decks, roofs and patios. 

• Built-to-last -- Hy-gain’s Patriot series antennas boast a high wind 

survival due to its sleek, but sturdy frame. The matching unit is made 

from all Teflon R insulated wire. 

• Top Loading: Parallel resonators -- best vertical-element efficiency 

• Full ground independence: No unsightly wire add-on radials 

• Top-to-bottom 3.5 to 4.0 MHz coverage: Pin-point fine-tuning 

accuracy for rock-bottom SWR on any frequency you choose. 

• Single coax feed . . . and with 100% automatic band selection! 

• Low profile: Most compact ground-independent antenna available! 

• Legal-limit 1500-Watt PEP: Power handling on SSB and CW* 

Adding 75/80 Meter coverage without compromising the Patriot's 

classic performance, ground independence, and tiny footprint was no 

small task. Yet, the AV-680 size, weight, and wind loading are nearly 

identical to the AV-640 with no unsightly radial extensions, traps, or topheavy 

vertical structures to render it less attractive or unsafe. 

Band selection remains fully automatic, all components handle maximum 

legal power, and you won't need a tuner with your solid-state rig. 

The AV-680's Expanded-Frequency Matchbox TM circuit ensures low 

SWR readings on every band, along with an upgraded balun design that 

concentrates all of your power in the antenna where it belongs! 

If space is a premium at your QTH and appearance matters, let Hy- 

Gain (R) open the door to one of ham radio's most attractive and popular 

bands with the new AV-680. This is your best choice for unparalleled 

versatility and band coverage from 6-80 Meters! 

AV-640, $449.95. Like AV-680 vertical antenna but just 25.5 feet tall 

and weighs only 17.5 lbs. It covers all bands 6 through 40 Meters with 

no traps, no coils, no radials yielding an uncompromised signal across 

all bands. AV-640 uses 1/4 wave stubs on 6, 10, 12 and 17 meters and 

efficient end loading coil and capacity hats on 15, 20, 30 and 40 meters. 

AV-620, $349.95. Like Hy-Gain’s famous AV-640 Vertical Antenna 

but just 22.5 feet tall and weighs only 10.5 pounds. It covers all bands 6 

through 20 Meters with no traps, no coils, no radials 

yielding an uncompromised signal across all 

bands. 

*Intermittent duty CW. 

2013 Ham Catalog 

Hy-Gain (R) Multi-Band PATRIOT Vertical Antennas 

9-band vertical covers 80/40/30/20/17/15/12/10/6 Meters 

• No radials • No traps • No ground • No tuning • Handles 1500 Watts 

New! 

Model # 

AV-620 

AV-640 

AV-680 

Bands 

6 Bands, 6-20 

8 Bands, 6-40 

9 Bands, 6-80 

hy-gain R AV-680 

9 Bands: 80, 40, 30, 20, 17, 15, 12, 10, 6 M 

$ 549 95 


6 Bands: 20, 17, 15, 

12, 10, 6 Meters 

$ 349 95 

AV-620/640/680 

Matching 

Network 

Max Power 



1500W* 

Height 

22.5 feet 

25.5 feet 

26 feet 

New! 

with 80M 


8 Bands: 40, 30, 20, 17, 

15, 12, 10, 6 Meters 

$ 449 95 

Weight 

10.5 lbs. 

17.5 lbs. 

18.5 lbs. 

Wind Surv. 

75 MPH 

70 MPH 

65 MPH 

www.hygain.com 117

hygain Antenna Rotators 

The Tailtwister is one of the 

most popular rotators in the Hygain 

product line. It has been the 

standard to what competing 

rotators try to match up to for 

well over years. Ask any ham 

who owns one. 

The T2X Tailtwister Series II Rotator is for 

large medium antenna arrays up to 20 square 

foot wind load. Wind load with mast adapter 

is 10 square feet. It has 1000 inches - pounds 

in turning power and 9000 inches-pounds in 

brake power. The effective movement in the 

tower is 3400 feet - pounds. 

A new automatic 5-second brake delay 

insures that the rotator is fully stopped before the brake is engaged. 

No more accidentally engaging the brake while the rotator is in 

movement. T2X features a new low temperature grease which permits 

normal operation to -30O T-2XD 

$ 95 1229 

with DCU-1 

T-2XD2 

$ 95 899 

with DCU-2 

F. New alloy ring gear has tensile 

strength of 100,000 psi for max reliability. 

The indicator potentiometer has been improved for greater reliability. 

A silver-plated relay contact point makes for smooth traveling 

and more reliable contact between the pot strip and wiper arm - 

- gives years longer life on these important, internal components. 

New water-tight AMP detachable twist-and-lock connectors at 

the rotator base and an 8-pin plug at the control box make it easy 

New! 

T-2X 

$ 799 95 

The HDR-300A is for king-sized antenna arrays up to 25 sq.ft. 

wind load area (inside tower). It has a 5000 inches - pounds turning 

power and a 7500 inches - pounds brake power. Brake construction 

is a solenoid operated locking brake and the bearing 

assembly is bronze sleeve with rollers built to handle huge loads. 

Control cable connector, new hardened stainless steel output shaft, 

new North or South centered calibration, new ferrite beads on 

potentiometer wires reduce RF susceptibility, new longer output 

shaft keyway adds reliability. Self-centering steel clamp and hardware. 

Display accurate to 1 o . Machined steel output. Mounting 

hardware, stainless steel bolts included. Use 110 VAC. Weighs 61 

118 www.hy-gain.com 

T2X TAILTWISTER SERIES II 

. . . for large medium antenna arrays up to 20 square foot wind load 

to hook up. Rotator has a triple bearing race with 138 ball bearings 

for large load bearing strength. Electric locking steel wedge brake 

prevents wind induced antenna movement. 

The control box features a North or South center of rotation 

scale on meter and low voltage control for safe operation. 

Clamp plate and stainless steel mounting hardware is included. 

Use 21 /16 inch maximum mast. Use 110 VAC. Order T-2XX for 

220 VAC. Optional lower mast, MSHD, $109.95. 

T2XD, $1229.95 with the DCU-1 Pathfinder digital control is 

available. The DCU-1 Pathfinder Controller features automatic 

operation of brake and rotator, computer control with RS-232 

passthrough and has a 1 degree heading accuracy. 

It is compatible with many logging and contest programs and 

has six pre-sets for your favorite beam headings. DCU-1 has an 

automatic 8-second brake delay and a 360 degree choice for center 

of rotation. Use 110 VAC. Order T-2XDX for 220 VAC operation. 

Order T-2XD, TAILTWISTER Rotator Specifications 

$1229.95 with DCU-1 Wind load capacity (inside tower) 20 square feet 

automatic controller. Wind Load (w/ mast adapter) 10 square feet 

Turning Power 

1000 in.-lbs. 

Order T-2XD2, Brake Power 

9000 in.-lbs. 

$899.95 with DCU-2 Brake Construction 

Electric Wedge 

automatic controller. Bearing Assembly 

Triple race/138 ball brngs 

See descriptions of Mounting Hardware 

Clamp plate/steel U-bolts 

Control Cable Conductors 

8 

DCU-1 and DCU-2 

Shipping Weight 

31 lbs. 

below. 

Effective Moment (in tower) 

3400 ft.-lbs. 

Hy-Gain Digital Automatic Controllers for HAM-IV and Tailtwister 

DCU-2 DCU-2 Digital 

$ 95 

Controller gives you 

399 fully automatic or manual 

control of HAM or Tailtwister 

Rotators. Dial in your beam heading 

and press the rotate button or let Ham 

Radio Deluxe (or other) control your 

DCU-2. Your antenna automatically rotates to desired direction precisely 

and safely. First, DCU-2 makes sure your antenna is free and 

safely unlocked before turning begins and then turns off your motor 

before your antenna reaches its final destination. Your antenna gently 

coasts to a stop before the brake locks. Greatly reduces potentially 

damaging overshoot. Fine tuning and full manual control is 

effortless with automated Left and Right direction buttons - - no 

more worrying about manually releasing and relocking the brake. 

Brake automatically releases before fine tuning begins and relocks 

after fine tuning is completed. Bright blue LCD displays actual, 

dial-in beam, and computer controlled beam headings in one degree 

increments and your call sign. AutoBrake Release - no need to 

remember to release brake or release too soon - release time is automatic 

0-8 seconds. Coast feature allows antenna to gently stop before 

brake locks. Adjustable coast delay (0-10 degrees) turns off 

motor before antenna reaches its final destination to reduce potentially 

damaging overshoot. AutoJog unlocks and frees antenna before 

turning -- great for older rotators with "sticky" brakes. It jogs 

rotator backwards slightly to ease brake pressure enough to release. 

Offset feature allows you to calibrate display to show actual beam 

heading. USB/RS-232 ports. Adjustable LCD sleep time. Field 

upgradeable. 8.5Wx4.3Hx9D”. 110 VAC. DCU-2X for 220 VAC. 

Hy-Gain’s DCU-1 Pathfinder is the 

innovative digital control unit that is 

compatible with T2X, HAMIV and 

HAM-V rotators. It provides automatic 

operation of brake and rotor and calibration. 

It also has an automatic stop 

if no rotator movement is detected in 8 

seconds. A motor pulse slowdown (half-cycle) also 

occurs on last 5-degrees before the complete stop. 

Also has momentary reverse direction on start-up. 

Front controls feature a 24-position digital encoder knob that sets 

the target bearing and center of rotation in calibrate mode. It has 6 

memory presets (push buttons), one start rotation (push button -also 

starts End Point Calibration ). It’s computer controlled 

with an RS232 pass-thru, allows programmable center of rotation 

and is compatible with many logging/contest programs. You get six 

presets (user programmable) for your favorite beam headings and a 

one degree heading accuracy. DCU-1 is super fast and easy-tooperate. 

Display is a full gas plasma, red filter circle analog that 

can be seen in the dark or direct sunlight. Analog scale is 5-degree, 

Digital scale is 1-degree with target bearing at thirty seconds. 

Display life is 30,000 to 40,000 hours. An automatic 8-second 

brake delay ensures the rotator is fully stopped before the brake is 

engaged --No more accidentally engaging the brake while rotator is 

in movement. Provides a 360 degree choice for center of rotation 

(North, South or other heading). Use 110 VAC, 50/60 Hz. Tough, 

durable cabinet is 8.5Wx4.3Hx9D inches. Ground terminal, fuse 

holder and 3-wire power cord are included. 

Order DCU-1X for 220 VAC operation. 

HDR-300A . . . for King-sized antenna arrays up to 25 square feet wind load 

lbs. UPS shippable. Order HDR- 

300AX for 220 VAC operation. 

HDR-300A Rotator Specifications 

Wind load capacity (inside tower) 

Wind Load (w/ mast adapter) 

Turning Power 

Brake Power 

Brake Construction 

Bearing Assembly 

Mounting Hardware 




25 square feet 

not applicable 

5000 in.-lbs. 

7500 in.-lbs. 

solenoid operated locking 

bronze sleeve w/rollers 

stainless steel bolts 

7 

61 lbs. 

5000 ft.-lbs. 

HDR-300A 

$ 1499 95 

DCU-1 

$ 749 95

the first choice of hams worldwide! 

HAM-IV . . . The most popular rotator in the world! 

. . . for medium communication arrays up to 15 square feet wind load . . . 

HAM-IV is the most 

popular rotator in the 

world for obvious rea- 

sons. It’s solidly constructed, has been 

time-tested and proven for over twenty 

years and is a heckuva buy at $649.95!!! 

HAM IV is for medium communications 

arrays up to 15 square feet wind 

load area (7.5 sq. ft. with mast adapter). 

It has 800 inches-lbs. turning power and 

5000 inches-lbs. brake power. 

Automatic 5-second brake delay 

insures that the rotator is fully stopped 

before the brake is engaged. No more 

accidentally engaging the brake 

while the rotator is in movement. 

New Test/Calibrate function. 

New low temperature grease 

permits normal operation down 

to -30 o F. New alloy ring gear 

gives extra strength to 100,000 PSI 

for maximum reliability. 

New indicator potentiometer has been improved for greater reliability. 

Silver-plated relay contact point makes for smooth traveling 

and more reliable contact between pot strip and wiper arm -- gives 

years longer life span on these important, internal components. 

Detachable 8 pin latching Cinch connectors make easy removal 

at rotator and 8 pin plug at controller. Dual 98 ball bearing race for 

load bearing strength and electric locking steel wedge brake prevents 

wind induced antenna movement. North or South center of rotation 

scale on meter, low voltage control, max mast size 2 1 /16”.110 VAC. 

Order HAMIVX for 220 VAC operation. Optional lower mast 

support, MSHD, $109.95. 

UHF/VHF/6M Rotator/Controller 

Designed for the use of small UHF, VHF, 6-Meter, TV and FM 

and other lightweight antennas. 

Rugged heavy-duty rotator is built in a weather-proof one piece 

AR-303/X 

$ 89 95 

HAM-IV 

$ 649 95 

CD-45II . . . for arrays up to 8.5 square feet 

For antenna arrays up to 8.5 sq. feet mounted 

inside tower or 5 sq. ft. with mast adapter. Low 

temperature grease good to -30OF. New Test/ Calibrate 

function. Bell rotator design gives total weather protection, 

dual 58 ball bearing race gives proven support. Die-cast ring 

gear, stamped steel gear drive, trouble free gear train, North 

center scale, lighted directional indicator, 8-pin plug/socket 

on control unit, snap-action control switches, low voltage 

control, safe operation, max mast size 21 CD-45II 

$ 95 

449 

/16”. MSLD, light 

CD-45II Rotator Specifications duty lower 

Wind load capacity (inside tower) 8.5 square feet mast support 

Wind Load (w/ mast adapter) 5.0 square feet included. Use 

Turning Power 

600 in.-lbs. 110 VAC or 

Brake Power 

800 in.-lbs. 


Disc Brake order CD- 


Dual race/48 ball brings 45IIX for 


Clamp plate/steel U-bolts 220 VAC 


8 opera- 


22 lbs. tion. 


1200 ft.-lbs. 

cast aluminum housing. Has 

precision metal gears and 

steel thrust bearings for durability. 

Includes rotator, controller, 

mount clamps and 

hardware. 

Use 110 VAC. Specify 

“X” for 220V. Has Hy- 

Gain’s superb one year limited 

warranty. 

HAM-V with DCU-1 Automatic Digital Controller 

. . . for medium antenna arrays up to 15 square feet 

Similar to the HAM IV, but 

includes DCU-1 Pathfinder automatic 

digital controller unit with 

gas plasma display. (see large 

description page 2). The DCU- 

1 provides automatic operation 

of brake and rotor and calibration, 

and is computer-controlled 

with RS-232 passthrough 

and compatible with 

many logging and contest 

programs. Features 6 presets 

for beam headings, 1 degree 

accuracy, auto 8-second 

brake delay, 360 degree 

choice for center location, 

HAM-V 

$ 1099 95 

with DCU-1 

HAM-VI 

$ 749 95 

with DCU-2 

plus much more. See larger description on page 2. Use 110 VAC. 

Order HAM-V, $1099.95. Order HAMVX, 220 VAC operation. 

Order HAM-VI, $749.95. Similar to HAM-V but has DCU-2 

auto controller, 110 VAC. Order HAM-VIX for 220 VAC opera- 

tion. See page 118 for more DCU-2 information. 

HAM IV and HAM V Rotator Specifications 

Wind Load capacity (inside tower) 15 square feet 

Wind Load (w/mast adapter) 7.5 square feet 

Turning Power 

800 in.-lbs. 

Brake Power 

5000 in.-lbs. 


Electric Wedge 


dual race/98 ball bearings 

Mast Support 

MSHD, 

$109.95. Heavy 

duty mast support 

for T2X, 

HAM-IV and 





Clamp plate/steel U-bolts 

8 

26 lbs. 

2800 ft.-lbs. 

HAM-V. Accepts 17 /8 to 

25 /8 inch OD pipe. 

Centers on 21 /2 inches. 

AR-40 . . . for compact arrays up to 3.0 square feet 

For compact antenna arrays and large 

FM/TV up to 3.0 square feet wind load 

area. Dual 12 ball bearing race. Automatic 

position sensor never needs resetting. 

Fully automatic control -- just dial and touch for 

any desired location. Solid state, low voltage control, 

safe and silent operation. 21 AR-40 

$ 95 349 

/16 inches maximum 

mast size. MSLD, light duty lower mast support 

included. Use 110 VAC or order AR-40X for 220 

AR-40 Rotator Specifications VAC 

oper- 

Wind load capacity (inside tower) 3.0 square feet 

Wind Load (w/ mast adapter) 1.5 square feet ation. 

Turning Power 

350 in.-lbs. 

Brake Power 

450 in.-lbs. 


Disc Brake 


Dual race/12 ball bearings 


Clamp plate/steel bolts 


5 


14 lbs. 


300 ft.-lbs. 

Remote Controlled Rotator/Controller 

Designed for the use of small UHF, VHF, 6-Meter, TV and FM 

antennas. Has programmable antenna controller with remote-control. 

AR-500 remembers up to 12 antenna directions 

even after a power outage! 

Control all functions with the remote control or 

AR-500/X console. The control console displays loca- 

$ 95 tion chosen and relative position. Has same 

119 rotator as AR-303 (see description left). 

Includes rotator, controller, 3device 

universal remote, mount 

clamps and hardware. Use 110 

VAC. 

Specify “X” for 220 Volts. 

www.hy-gain.com 119

These super heavy-duty RAK 

Rotators are designed with a 

simple double worm gear drive. 

This results in a super-strong 

ultra-reliable rotator system with 

inherent self-braking. Each 

includes a precision automatic 

digital controller. 

Turning is powerful, smooth, 

precise and extremely quiet. The 

inherent self-braking action of its 

double worm gear drive positively 

stops it every time -- it won’t 

move! 

It’s fast! A high-torque DC 

gear motor rotates your antenna 360 

/AlfaSpid Azimuth & Elevation Rotators 

Super heavy-duty Rotators . . . Super strong Double Worm Gear Drive, Self-Braking, Extremely 

Quiet Motors, One Degree Position Resolution, Automatic Digital Controller. Up to . . . 38 sq. ft. 

wind load . . . 8000 in./lbs. turning torque . . . 24,000 in./lbs. brake torque . . . 700 lbs. vertical load 

RAK-1 (RAK) 

$ 1199 95 

Includes RAK-1C 

controller 

Plate adaptor, mouse not included 

degrees in just 60 seconds with 24 Volts on the motor. The 

RAK Rotators operate from 12 to 24 Volts AC or DC. The 

higher the voltage the higher the torque and the faster the 

turning speed -- a unique RAK feature. 

RAK-1 Specs 

Wind Load Area 

Turning Torque,in-lbs 

Brake Torque, in-lbs. 


Vertical Load 

Rotation Speed/360 deg 

Precision 

Rotation Range 

Rotator Weight 

Position Sensor 

Mast size 

RAS-1 Specs 


Turning Torque in-lbs 



Vertical Load 

Rotation Speed (360 degrees) 

Precision, Rotator Weight 

Rotation Range (Azi/Elev.) 


Mast size Bottom/Elevation 

RAK-1C / RAS-2C Specs 

Computer Interface 

Pre-sets with Mouse 

Emulation 

Limit Settings 

User-settable Calibration 

Precision 


Weight 

Connections to Rotator 

RAK-1 @ 12 V 

Approx. 30 sq. feet 

1400 in-lbs. 

14,000 in-lbs. 

Double Worm Gears 

550 lbs. 

120 seconds 

1 degree 

720 degrees 

16 lbs. 

Reed Switch 

2.0/2.6 in. Top/Bot. 

Hy-gain offers the 

RAS (RAS-1) and 

BIG RAS (RAS-2) 

super heavy-duty 

Azimuth-Elevation 

Rotators. Has same 

heavy-duty design as 

RAK rotators. Each 

includes the RAS-2C 

Automatic Digital Controller. 

RAK-1 @ 18 V 


1800 in-lbs. 

14,000 in-lbs. 


550 lbs. 

90 seconds 

1 degree 

720 degrees 

16 lbs. 

Reed Switch 

2.0/2.6 in. Top/Bot. 

RAS-1 @ 12 V 

Approx. 30 square feet 

1400 in-lbs. 

14,000 in-lbs. 


550 lbs. 

120 seconds 

1 degree, 29 lbs. 

360/180 degrees 

Reed Switch 

2.6 bottom/2.0 elevation 

RAK-1 @ 24 V 


3240 in-lbs. 

14,000 in-lbs. 


550 lbs. 

60 seconds 

1 degree 

720 degrees 

16 lbs. 

Reed Switch 

2.0/2.6 in. Top/Bot. 

Azimuth-Elevation Rotators 

RAS-2 has same specifications as RAS-1 below but with these superspecs. 

Turning Power: 5,000 in-lbs. torque@12V; 8000 in-lbs. 

torque@18V; Brake Torque: 24,000 in-lbs. at all voltages; Vertical Load: 

greater than 700 lbs; RAS-2 weighs 44 lbs. 

RAS-1 @ 18 V 


1800 in-lbs. 

14,000 in-lbs. 


550 lbs. 

90 seconds 


360 azi/180 degrees 

Reed Switch 


RAK-1C RAK-1 and RAK-2 

$ 95Rotators 

are supplied with the 

569 RAK-1C Automatic 

Controller. 

Manual Mode: Left/Right arrows, 

moves rotator clockwise and counter 

clockwise. 

Semi- 

Automatic Mode: 

Allows pre-set of 

desired beam locations 

(requires 

optional mouse). 

Automatic 

RAK-1C, $569.95 

RS-232, 1200 Baud 8N 1 

6 User settable 

Spid, HY, OR, Yaesu 

2-AZ-CW & CCW 

N-S or any degree 

1 or 0.5 degree 

720 degrees 

2.75 lbs. 

4 wire (2 sens, 2 motor) 

RAS-1 

$ 95 

1899 

Includes RAS-2C 

Controller. 

RAS-2 

Plate adapters $ 95 

not included. 2990 

It’s simple to mount! 

Pipe mast mount on both 

ends allow coax cables to 

pass through the center of the 

rotator and prevents cable 

tangling and damage. An 

optional adaptor is available for 

plate mounting. See accessories 

section below. 

It’s precise! The included 

RAK-1C controller has one 

degree resolution and a large 

3/4 inch 4-digit easy-to-read 

soft green LED digital readout. 

Sealed reed switch sensor technology 

gives reliable all-weather 

operation and super tight tolerances 

with minimal play. 

It’s tough & durable! Heavy-duty construction uses 3/16 

inch thick-wall steel pipe and ultra-durable steel housing. 

RAK-2 Specs 


Turning Torque,in-lbs 



Vertical Load 

Rotation Speed/360 deg 

Precision 


Rotator Weight 


Mast size 

RAS-1 @ 24 V 


3240 in-lbs. 

14,000 in-lbs. 


550 lbs. 

60 seconds 



Reed Switch 


RAK-2 @ 12 V 

Approx. 38 sq. ft. 

>5000 in-lbs. 

24,000 in-lbs. 


>700 lbs. 

120 seconds 


720 degrees 

24 lbs. 

Reed Switch 

2.6/2.6 in. Top/Bot. 

120 Hy-Gain . . . Antennas, Towers and Rotators 

RAK-2 (BIG RAK) 

$ 1699 95 


controller 

Plate adaptor, mouse not included 

RAK-2 @ 18 V 


>8000 in-lbs. 

24,000 in-lbs. 


>700 lbs. 

90 seconds 


720 degrees 

24 lbs. 

Reed Switch 

2.6/2.6 in. Top/Bot. 

Digital Rotator Controllers 

RAS-2C, $719.95 

RS-232, 600 Baud, 8N 1 

N/A 

Spid, Yaesu 

4 (2 AZ - 2 EL) 

AZ & EL, any degree 

1, 0.5, 0.25 degree 


4.75 lbs. 

4 wire (2 sens, 2 motor) EL 

4 wire (2 sens, 2 motor) AZ 

RAK-2 @ 24 V 


Contact Hy-Gain (R) 

24,000 in-lbs. 


>700 lbs. 

60 seconds 


720 degrees 

24 lbs. 

Reed Switch 

2.6/2.6 in. Top/Bot. 

Elevation Rotator 

The REAL-1 

Elevation Rotator 

has all the super 

heavy-duty specifications 

of the 

REAL-1 

$ 95 1449 


controller 

RAK-1 but is for moving antennas 

180 degrees up or down. 

Includes RAK-1C digital rotator 

controller. 

Model# 

AZ-1M 

RAK-1R 

RAK-2R 

RAK-1C 

RAS-1R 

RAS-2R 

RAS-2C 

REAL-1R 

FPA-4 

FPA-8 

PTP-18 

Rotator 

Accessories 

Cost Description 

$39.95 Rotator Cntrlr Mouse only 

$869.95 RAK Rotator Only 

$1439.95 BIG RAK Rotator only 

$569.95 RAK Auto Controller only 

$1429.95 RAS Rotator only 

$2489.95 BIG RAS Rotator only 

$719.95 RAS Auto Controller only 

$869.95 REAL Rotator only 

$49.95 4” Pipe to Flat Plate Adptr 

$59.95 8” Pipe to Flat Plate Adptr 

$89.95 18” Pipe to Pipe Adaptor 

FPA-4 

$49.95 

FPA-8 

$59.95 

PTP-18 

$89.95 

Mode: Your external computer connected to 

RS-232 interface provides automatic control. 

Works with most rotator control computer programs. 

Controller can be zeroed at any position to 

allow for installation inaccuracy or antenna 

mount slippage. Has one degree resolution 

and a large 3/4 inch 4-digit easy-to-read soft 

green LED digital readout. 

Uses standard four conductor cable to controller. 

Compact 5Wx1 1 /2Hx8 3 /4D in. 

Optional Mouse, AZ-1M, $39.95, allows 6 

user programmable preset buttons. Mouse 

rotates rotator left, right and stop.

HF BEAMS. . . 

. . . are stronger, lighter, have less wind surface and last years longer 

TH-11DX 

$ 1159 95 

11-Elements, 4.0 kW PEP, 

10, 12, 15, 17, 20 Meters 

TH-11DX, $1159.95. 11-element, 4.0 kW PEP, 10,12,15,17,20M 

The choice of top DXers. With 11-elements, excellent gain and 5-bands, 

the super rugged TH-11DX is the “Big Daddy”of all HF beams! Handles 2000 

Watts continuous, 4000 Watts PEP. 

Every part is selected for durability and ruggedness for years of troublefree 

service. Features a low loss log-periodic driven array on all bands with 

monoband reflectors, BN-4000 high power balun, corrosion resistant wire 

boom support, hot dipped gal-vanized and stainless steel parts. 

Stainless steel hardware and clamps are used on all electrical connections. 

Compact 3-element 

10, 15, 20 Meter Tri-Bander 

For limited space . . . Installs anywhere . . . 14.75 ft turning 

radius . . . weighs 21 lbs . . . Rotate with CD-45II, HAM-IV 

Fits on light tower, suitable guyed 

TV pole, or roof tri-pod. 

TH-3JRS, $359.95. 

Hy-Gain’s most popular 3-element 

10, 15, 20 Meter tri-bander 

fits on most lots! 

Same top performance as the 

full power TH3MK4 in a compact 

600 watt PEP design. 

Excellent gain and F/B ratio let 

you compete with the “big guns”. 

Tooled manufacturing gives you 

Hy-Gain durability with 80 MPH 

wind survival. 

Model 

No. 

No. of avg gain 

elements dBi 

avg F/B 

gain 

11 

4000 10,12,15,17,20 12.5 100 24 

7 

1500 10, 15, 20 9.4 100 24 

5 

1500 10, 15, 20 7.4 100 19 

3 

1500 10, 15, 20 4.6 95 14 

3 

600 10, 15, 20 3.35 80 12 

2 

1500 10, 15, 20 3.25 80 6 

4 

7 9.8 22 



10,15,20 

10, 15 

7.5 

6.7 

100 

115 

14 

14 

7 9.8 22 1500 12, 17 6.7 115 14 

MaxPwr 

watts PEP 

Bands 

Covered Wind Wind (mph) 

sq.ft. area Survival Boom 

(feet) 

TH-11DX 

8.4 22 

TH-7DX 

8.77 21 

TH-5MK2 

8.3 20 

TH-3MK4 

8.0 25 

TH-3JRS 

8.0 25 

TH-2MK3 

5.6 15-20 

EXP-14 

DB-1015 

8.1 25 

opt. 

30/40 

DB-1217 

TH-7DX, $869.95. 

7-element, 1.5 kW PEP, 10,15,20 Meters 

7-Elements gives you the highest average gain of any 

Hy-Gain tri-bander! Dual driven for broadband operation 

without compromising gain. SWR less than 2:1 on all bands. 

Combined monoband and trapped parasitic elements give 

you an excellent F/B ratio. Hy-Gain 

TH-5MK2, $759.95. 


TH-3MK4, $469.95. 


TH-2MK3, $369.95. 


EXP-14, $599.95. 


’ s diecast aluminum, 

rugged boom-to-mast clamp, heavy gauge element-to-boom 

brackets, BN-86 balun. For high power, use BN-4000. 

The broadband five element TH5-MK2 gives you outstanding 

gain. Separate air dielectric Hy-Q traps let you 

adjust for maximum F/B ratio on each band. Has Hy- 

Gain ’ s exclusive BetaMATCHTM , stainless steel hardware 

and compression clamps and BN-86 balun. 

The super popular TH-3MK4 gives you the most gain 

for your money in a full-power, full-size durable Hy-Gain 

tri-bander! Impressive average gain and whopping average 

front-to-back ratio. Handles 1.5 kW PEP. 95 MPH 

wind survival. Fits on average lot -- turning radius is just 

15.3 feet. 4-piece boom is ideal for DXpeditions. Choose 

CD-45II or HAM-IV rotator. Hy-Gain BetaMatch 

DB-1015, $449.95. 

7-element, 1.5 kW PEP, 10 & 15 Meters 

This dual band beam for 10 and 15 Meters incorporates 

Hy-Gain’s superior mechanical design and has been 

computer optimized and range-tested for max performance. 

DB-1015 features a 14 foot boom in 4 sections. 

Handles full legal power and has Hy-Gain’s rugged 

boom-to-mast clamp. DB-1217, $449.95. Similar to DB- 

1015, but is dual band coverage for 12 and 17 Meters. 

TM for 

DC ground, full power Hy-QTM traps, rugged boom-tomast 

bracket and mounts on standard 2”O.D. mast. 

Stainless steel hardware. BN-86 balun recommended. 

The 2-element TH-2MK3 is Hy-Gain’s most economical 

full power (1.5kW PEP) full size tri-bander. Increase your 

effective radiated power and hear far better! Ruggedly 

constructed, top-performing, compact 6 foot boom, tight 

14.3 foot turning radius. Installs almost anywhere. 

Rotate with CD-45II or HAM-IV. Use BN-86 balun. 

Revolutionary 4-element compact tri-bander can add 

40 or 30 Meters! 14 foot boom and tight 17.25 feet turning 

radius. Fits on roof tri-pod, mast or medium duty tower. 

Hy-Gain’s patented broadbanding ParaSleeve gives you 

less than 2:1 VSWR. 1.5kW PEP. BetaMATCHTM provides 

DC ground to eliminate static. Has BN-86 balun. 

QK-710, $179.95. 30/40 Meter option kit for EXP-14. 

Longest 

Elem. (ft) 

37 

31 

31.5 

27.42 

27.25 

27.3 

31.5 

29.5 

29.5 

Turning 

radius(ft) 

22 

20 

18.42 

15.33 

14.75 

14.25 

17.25 

16.3 

16.3 

Weight 

(lbs.) 

88 

75 

57 

35 

21 

20 

45 

40 

40 

Mast dia 

O.D.(in.) Recom. 

Rotator Retail 

1.9-2.5 

1.5-2.5 

1.5-2.5 

1.9-2.5 

1.25-2.0 

1.9-2.5 

1.9-2.5 

1.5-2.5 

1.5-2.5 

T2X 

HAM-IV 

HAM-IV 

CD-45II 

CD-45II 

CD-45II 

HAM IV 

HAM IV 

HAM IV 

Price 

$1159.95 

$869.95 

$759.95 

$469.95 

$359.95 

$369.95 

$599.95 

$449.95 

$449.95 

www.hy-gain.com • Toll-free 1-800-973-6572 121

Hy-Gain Long Johns HF Monobanders 

LJ-105CA, $289.95.10 Meters, 5 elements, 

Exclusive 50 Ohm BetaMatch TM . Excellent 

DC Ground. Stainless steel hardware and 

clamps. BN-4000 Balun recommended. 

LJ-155CA, $429.95. 15/12 Meters, Five 

Elements, Exclusive 50 Ohm BetaMatch TM . 

Excellent DC Ground. Stainless steel hardware 

and clamps. Includes 12 Meter setting. 

BN-4000 Balun recommended. 

LJ-205CA, $769.95. 20/17 Meters, Five 

Elements. Exclusive 50 Ohm BetaMatch TM . 

Excellent DC Ground. Stainless steel hardware 

and clamps. BN-4000 Balun recommended. 

Manual has setting for both bands. 

LJ-204BA, $539.95. 20/17 Meters, Four 

Elements. Exclusive 50 Ohm BetaMatch TM . 

The LJ-204BA has a tiltable cast aluminum 

boom-to-mast clamp, heavy gauge 

Model # 

LJ-105CA 

LJ-155CA 

LJ-205CA 

LJ-204BA 

LJ-103BA 

LJ-153BA 

LJ-203BA 

Hy-Gain Discoverer Series Antennas 

Model # 

DIS-71 

DIS-72 

DIR-73K 

Hy-Gain HF Log Periodic Antennas 

LP-1009A, $1429.95. LP-1009A for 

UHF connector. LP-1009AN for “N” 

connector. Covers 10/12/15/17/20 Meters 

Covers the complete 13-30 MHz HF spectrum 

under a 2:1 VSWR. Built to commercial 

specifications, it is used by 

MARS, monitoring stations, marine and 

government radio stations around the 

world and now it’s available to Hy-Gain 

amateur customers. The discerning ham 

operator will appreciate its performance 

and ease of use. Just imagine all that spectrum 

coverage and only one feedline. 

Exclusive 2KW BN-4000 current type 

Model # 

LP-1009A/N 

LP-1010A/N 

Gain (dBi) 

10.8 dBi 

9.8 dBi 

8.7 dBi 

8.2 dBi 

7.9 dBi 

7.9 dBi 

7.3 dBi 

Gain (dBi) 

6.5 dBi 

6.5 dBi 

7.5 dBi 

Gain (dBi) 

7.3 dBi 

7.0 dBi 

F/B Max 

36 dB 

25 dB 

30 dB 

28 dB 

24 dB 

25 dB 

23 dB 

F/B Max 

35 dB 

15 dB 

26 dB 

F/B Max 

22 dB 

22 dB 

machine-formed element-to-boom brackets 

and stainless steel hardware and clamps. 

BN-4000 Balun is recommended. Manual 

has setting for both bands. 

LJ-103BA, $159.95. 10 Meters, Three 

Elements. Feeds with 50 Ohm coax, 

comes factory pre-tuned with Hy-Gain’s 

exclusive BetaMatch TM . BN-86 balun recommended. 

Includes stainless steel hardware 

and clamps. 

LJ-153BA, $209.95. 15 Meters, 3 elements. 

Feeds with 50 Ohm coax, BetaMatch TM , 5.7 

dBd gain. BN-4000 Balun recommended. 

Stainless steel hardware and clamps. 

LJ-203BA, $329.95. 20 Meters, Three elements 

on a 16 foot boom. The LJ-203BA 

feeds with 50 Ohm coax, factory pre-tuned 

with Hy-Gain’s exclusive BetaMatch TM . 

Max Power 

1500 W PEP 







Boom Size 

24 feet 

26 feet 

34 feet 

26 feet 

8 feet 

12 feet 

16 feet, 6 in. 

ele. length 

18 feet 

25 feet 

36 feet 



24 feet, 11” 

37 feet 

DISCOVERER 71, $369.95. 

Covers 40/30 Meters. 

This rotatable dipole of low weight and 

wind surface area so easily fits most existing 

beam installations. Tuned to 30 or 40 Meters 

with a front-to-side ratio of 30 dB for a fast, 

expansion of band capability. Feeds with 50 

Ohm coax. Pre-formed mast clamp. 

DISCOVERER 72, $799.95. 

Covers 40 Meters. 

This two-element 40 Meter beam has a 

unique hairpin loading system. It delivers 

superior performance. Feeds with 50 Ohm 

coax and comes factory pre-tuned with Hy- 

Max Power 




balun included. Use T2X Tailtwister or 

HDR-300A rotators. 

turn Radius 

15 feet 


25 feet 




20 feet 

LP-1010A, $1799.95. LP-1010A for 

UHF connector. LP-1010AN for “N” 

connector. Covers10-30 MHz 

(10, 12, 15, 17, 20, and 30 Meters) 

There are only a few antennas that offer as 

much HF frequency coverage as the LP- 

1010A. Like the LP-1009A, this antenna 

is built to commercial standards using 

stainless steel hardware and having a wind 

survivability of 93 mph. Rotatable with 

use of T2X or HDR-300A rotators. 

Max Power 



Boom size 

2.7 feet 

22.6 feet 

35 feet 

Boom size 

27 feet 

36 feet 

elment size 

45 feet 

44.8 feet 

45.7 feet 

ele. length 

39 feet 

48 feet 

turn Radius 

22.5 feet 

25 feet 

28.9 feet 

turn Radius 

22.5 feet 

28.5 

122 Hy-Gain . . . Antennas, Rotators and Towers 

BN-4000 Balun is recommended. Stainless 

steel hardware and clamps. Tiltable, cast 

aluminum boom-to-mast bracket. 

Mast diam. 

1.9-2.5 in. 

1.9-2.5 in. 

1.9-2.5 in. 

1.9-2.5 in. 

1.625-2.0 in. 

1.9-2.5 in. 

1.9-2.5 in. 

Surface 

3.9 sq. feet 

5.2 sq. feet 

9.0 sq. feet 

7.3 sq. feet 

2 sq. feet 

3 sq. feet 

5.4 sq. feet 

Wind 

100 m.p.h. 

88 m.p.h. 

99 m.p.h. 

100 m.p.h. 

107 m.p.h. 

80 m.p.h. 

80 m.p.h. 

Gain’s exclusive BetaMatch TM . Tiltable 

boom-to-mast bracket and stainless steel 

hardware is included. Hy-Gain high power 

BN-4000 balun is recommended. 

DIR-73K, $549.95. 

Add-On 30/40 Meter Director Kit 

Converts the Discoverer 72 into a three-element 

beam. Amazingly, it’s all on a 35 foot 

boom, outperforming the other brands that 

are much larger. Discoverer 72 with director 

Kit fits on medium duty towers such asHG- 

52SS, saving both cost and space. HyGain 

offers wide bandwidth and Hy-Q efficiency 

without coils. Handle legal power limits. 

Mast diam. 

1.9-2.5 in. 

1.9-2.5 in. 

1.9-2.5 in. 

Mast diam. 

1.9-2.5 in. 

1.9-2.5 in. 

Surface 

2.7 sq. feet 

6.0 sq. feet 

9.0 sq. feet 

Surface 

12.5 sq. feet 

16 sq. feet 

Wind 

100 m.p.h. 

80 m.p.h. 

80 m.p.h. 

Wind 

103 m.p.h. 

93 m.p.h.

Hy-Gain VHF Vertical Antennas 

Oscar Link 435 MHz•145.9 MHz 

VB-216SAT 

$ 95 229 

Covers 

144-148 MHz 

UB-7030SAT 

$ 229 95 

Covers 

432-438 MHz 

FB-217SAT 

$ 119 95 

Crossboom 

Assembly only 

Hy-Gain’s Oscar Link antennas 

are complete with the necessary 

phasing lines, relays and hardware. 

Left and right circularity 

switching reduces fading. True 

RF switching elements are rated 

at 200 Watts and improved VSWR 

for higher efficiency. Feed points 

are encapsulated, weather protected 

for long life. The fiber- 

glass crossboom maintains the integrity of the circularity pattern. 

DB-218SAT, $559.95. The complete 2 Meter/ 440 MHz Oscar 

Link antenna system with crossboom assembly with necessary 

phasing lines, relays and hardware. 

Model# F/B ratio Gain dBi Pwr Input # Element Boom Wind Weight 

VB-216SAT 25 dB 13.7 dBi 200 W PEP 16 168.75 in. 1.1 sq. ft. 7 lbs. 

UB-7030SAT 25 dB 16.2 dBi 200 W PEP 30 134 inches .7 sq. ft. 4 lbs. 

Model# Frequenc Gain dBi Pwr Input wind area #Element Boom Weight 

UB-7031DX 420-438 19.8 dBi 2 kW PEP 1.9 sq. ft. 31 24.06 ft. 9.25 lbs. 

VB-215DX 

VB-64DX 

VB-66DX 

VHF-FM Beam Antennas 

2 Meter 

vertical 

with 5.2 

dBi gain 

derived 

from the famous 

extended double zepp 

antenna design. 

Radiating elements are 

two collinear 

Hy-Gain VHF Ground Planes 

5 V-2R 

$ 95 109 

Covers 

138-175 MHz 

/8 waves 

fed in phase. 2 sets of 

1 

/4 wave radials properly 

decouple lower radiator 

from the mast. SO-239, 

handles 500 Watts. 9 ft. 

V-42R is 

independentlytunable 

at 

144 and 

440 MHz. 

Fed through one coax 

cable, it has sets of 1 /4 

wave radials which 

properly decouple 5 UHF vertical 

with 5.2 

dBi gain 

derived 

from double 

zepp 

antenna 

design. 

Type N, 

handles 500 

Watts, 4 foot. 

1 

V-42R 

$ 95 169 

Covers 143- 

153, and 436- 

455 MHz 

/8 

wave radiators from the 

mast. Gives 5 dBd gain 

UHF and 3 dBd gain on 

VHF. Type N, handles 

200 Watts. 9 ft. 

1 V-4R 

$ 95 109 

Covers 

400-475 MHz 

V-3R 

$ 95 119 

Covers 

216-225 MHz 

/4 Meter vertical w/5.2 

dBi gain, double zepp 

design. SO-239, handles 

500 Watts. 6ft., 9 in. 

V-6R antenna 

is based 

on 2 collinear 

5 /8 

wave radiators. 

500 Watt enclosed 

coil and 2 sets of 1 These 2 Meter FM beam antennas include Hy-Gain’s exclusive 

Beta Match 

V-6R 

$ 95 204 

Covers 51-54 

MHz 

/4 wave 

radials provide complete 

mast decoupling and optimum 

pattern and gain. 

Rugged design for severe 

weather, also DC ground 

lightning protector. 25 ft., 

3 in., UHF female connect, 

handles 500 Watts. 

Model# 

V-2R 

V-42R 

V-4R 

Frequenc 

138-175 

143-153, 

436-455 

400-475 

Gain dBi Pwr Input 

5.2 dBi 500 Watts 

7.2 UHF 200 Watts 

5.2 VHF continuous 

5,2 dBi 500 Watts 

Wind 

105 mph 

100 mph 

130 mph 

Max Mast 

2 in. OD 

2 in. OD 

2 in. OD 

Height 

9 foot 

9 foot 

4 foot 

Weight 

6 pounds 

6 pounds 

4 pounds 

V-3R 216-225 5.2 dBi 500 Watts 100 mph 2 in. OD 6 ft. 9 in. 5 pounds 

V-6R 51-54 5.2 dBi 500 Watts 80 mph 1.5-2.25 25 ft. 3 in. 15 pounds 

VB-64DX 

$ 95 144 

50-54 MHz 

TM to provide exceptional Front-to-Back ratio and maximum 

obtainable gains. VB-23FM (8.3 dBi gain), VB-25FM (11.2 

dBi gain), VB-28FM (14 dBi gain), and VB-214FM (15.2 dBi 

gain). Threaded stub for feedpoints. Accepts up to 2 inch mast. 

VB-23FM VB-25FM VB-28FM VB-214FM 

$ 95 $ 95 $ 95 $ 95 

49 59 79 89 

Feedpoint Pig Tail Cable 

APT-2, $12.95. Optional 2-foot length for connect- APT-2 

ing between antenna and coax. SO-239 on one end and 

2 (#10) ring terminals on other. Fits VB series beams. 

Dual Band Yagi Antenna 

DB-2345 DB-2345 gives a whopping 8 dBi gain 

$ 95 89 on 2-Meters and 6 dBi gain on 440 

2 Meter/440 MHz. Has 3-elements on two meters 

Dual Band Yagi and 5-elements on 440 MHz. Requires 

only one feedline for true dual band performance. Point 

in direction of your QSO for more direction of output 

power. This redcuces interference and increases signal strength. 

TriBand 2M/440MHz/6M Yagi 

VHB-246 VHB-246 Tri-beam has 3 ele- 

$ 95 259 ments on 6M/2M and 5 elements 

2 Meter/440/6M on 440 MHz. 144/440 MHz are 

Tri-Band Yagi mounted at right angles to the 6M 

Model# 

VB-23FM 

F/B MAX 

20 dB 

beam -- lets antenna be oriented 

for optimum 6M SSB/CW and 2M/440 MHz. 

Coax feed points for 6M and 2M/440 MHz. 

Gain dBi Pwr Input Long el Boom Mast dia. Weight 

8.3 dBi 500 Watts 40.25 in. 43.5 in. 2.0 in. 2 pounds 

VB-25FM 20 dB 11.2 dBi 500 Watts 39.625 in. 75 in. 2.0 in. 3 pounds 

VB-28FM 

VB-214FM 

20 dB 

20 dB 

14 dBi 

15.2 dBi 

500 Watts 

500 Watts 

40.25 in. 

39.5 in. 

148.75 in. 

15 ft. 6 in. 

2.0 in. 

2.0 in. 

4 pounds 

6 pounds 

GPG-2B GPG-2B is a 5/8 Wavelength 

$ 95 Ground Plane for two meters is 

49 omni-directional and tunable from 

Covers 142-185 MHz. It delivers an omni- 

142-185 directional gain of 3.2 dBi. Handles 

MHz 100 Watts. Measures 4 feet, max 

mast mount accepted is 1.625 in O.D. Wind 

area is .30 sq. ft. 

GPG-1B GPG-1B is a 1/4 Wavelength 

$ 95 39 ground plane similar to the GPG- 

Covers 

2B. It has unity gain, covers 144- 

144-148 

148 MHz. 

MHz 

GPG-1, $39.95, is similar to GPG- 

1B, but covers162-174 MHz. 

DB-2345 - 2M 

VHB-246 - 2M 17 dB 8 dBi 500 Watts 40.5 in. 45 in. 1.5 in. 2 pounds 

DB-2345 - 440 

10 dB 6 dBi 500 Watts 40.5 in. 45 in. 1.5 in. 2 pounds 

VHB-246 - 440 

VHB-246-6M 20 dB 8 dBi 500 Watts 119 in. 144 in. 2.0 in. 28 pounds 

6-Meter DX Beam Antennas 

VB-66DX 

$ 95 The VB-64DX and VB- 

264 66DX feature a concept 

Covers in beam construction 

50-54 MHz 

that provides actual 

delivered performance equalling maximum 

theoretical gain. The 4-element 

VB-64DX generates an impressive 

10.4 dBi gain and the 6-element VB- 

66DX increases the gain to an 

unprecedented 12.5 dBi. 

144-146 

50-54 

50-54 

16.4 dBi 

10.4 dBi 

12.5 dBi 

2 kW PEP 

500 Watts 

1.5kWPEP 

2.75 sq. ft. 

1.1 sq. ft. 

1.8 sq. ft. 

VHF/UHF DX Beam Antennas 

VB-215DX 

$ 229 95 

Covers 

144-146 MHz 

Hy-Gain’s DX-Series VHF/UHF 

Beams are based on the DL6WU 

element length and spacing and 

were further refined on Hy-Gain’s 

antenna test range and by com- 

puter modeling. Both beams feature encapsulated weatherproof 

feedpoints with type N connectors for excellent VSWR and power 

handling. High quality mechanical construction is assured by 

heavy wall booms and boom supports made of 6063-T832 aluminum 

tubing, stainless steel hardware, UV stabilized thick-shoulder 

element insulators and PTFE coaxial baluns. 

www.hy-gain.com 123 

15 

4 

6 

27.88 ft. 

12 ft. 

24.575 ft. 

13.56 lbs. 

10 lbs. 

17 lbs.

Hy-Gain LongJohn 10/12 Meter Beams 

LJ-115 . . . 5-Elements . . . 9.7 dB Forward Gain . . . 

Hy-Gain 20/15/10/6 Meter 

Rotatable Dipole 

TH-1 is a full-size high-effiency 26’, 20-15-10- 

6 Meter full legal limit rotatable dipole that is super 

low-profile -- almost invisible from across the street! 

With a 13-foot turning radius and tiny 9 lb. weight, it 

fits on small roofs, apartments and condos -- easily turned by a lightweight 

TV rotator like Hy-Gain (R) AR-35. 

Mount in the attic for antenna restricted neighborhoods. But it is 

no wimp! Its bidirectional pattern can help reduce QRM and/or 

noise while maximizing your signal in the directions that you want -so 

you can work some real DX. Handles up to a full 1500 Watts 

SSB/CW on all HF bands and Six Meters. 

Hy-gain 6M Add-On Dipole Kit 

Adds 6-Meter capability 

to most HF yagis 

or rotatable dipoles. 

MK-6 

$ 39 95 

UPS Shippable 

The Hygain LJ-115 

is a five element 

10/12 Meter beam 

antenna designed to 

give maximum performance. 

It has a whopping forward gain of 

9.7 dB and a great front-to-back ratio 

of 25 dB. 

LJ-115 is constructed of the best 

quality aluminum tubing and uses a 

new swaged (tapered) design for maximum 

strength and lightest weight. It 

boasts an 80 MPH wind survivability. 

This powerful beam features 

Hy’Gain’s exclusive Beta-Match TM system 

which matches the antenna to a 50 

Ohm feedline and puts the driven element at DC ground for noise-free 

operation and lightning protection. 

LJ-115 is easily rotated with a Hygain rotator for 360 degree coverage. 

See popular Hygain models AR-40 and CD-45II on page 119. 

Feed this antenna with any standard 52 Ohm coaxial cable. 

Expect a 1.05:1 SWR at resonance if the antenna is mounted in the 

clear and care is taken in attaching the feedline. The SWR will 

remain below 1.5:1 over the entire 10 Meter frequency range. 

LJ-113 . . . 3-Elements . . . 8.2 dB Forward Gain . . . 

Forward Gain 

Power Multiplication Factor 

Front-to-Back Ratio 

Typical SWR 

Coaxial Feedline 

Boom Length 

Longest Element 

Mast Diameter 

Maximum Wind Survival 

Net Weight 

New! 


LJ-115 

9.7 dB 

9.3 

25 dB 

1.05:1 

52 Ohms 

18 feet 

18 feet 

1 5 /8 inch 

80 MPH 

18.9 lbs. 

LJ-115 

$ 299 95 

LJ-113 

8.2 dB 

6.6 

20 dB 

1.05:1 

52 Ohms 

8 feet 

18 feet 

1 1 /4 to 1 5 /8 inch 

80 MPH 

6.8 lbs. 

LJ-113, 

$169.95. 

Similar to 

LJ-115 but 

has three 

elements 

and a much 

smaller 

boom, 8 

feet. It still 

TH-1 

$ 299 95 

New! 

delivers an amazing 8.2 

dB forward gain and great 

front-to-back ratio. 

UPS Shippable 

Mounted to driven element of most 

HF rotatable dipoles or HF singleband/multi-band 

beams without affecting 

antenna’s performance. Handles 

1.5 kW. Adds less than 1 lb. weight and essentially no increase in 

wind-loading to the existing antenna. HF beam must be direct-fed with 

coax, or a 1:1 balun that handles 1.5 kW. Power may be limited by the 

power handling of the installed balun on HF beam. 

124 www.hy-gain.com 

Hy-Gain 5/8 Wave 10/12 Meter 

Super-Penetrator TM 


This fantastic true full-size 5/8 Wave 10/12 

Meter vertical antenna from Hy-Gain was a legend 

in the 70’s . . . now it’s back to prove its legendary 

status once again! 

A Full-size radiator with lower radiation angle 

concentrates power closer to the ground, where 

you want it. Measures 22 foot, 9.5 inches. Larger 

diameter, heavy wall ply-tubular construction 

makes the new Super-Penetrator TM the absolute 

top omnidirectional antenna around! Four fulllength 

radials and special machine-formed brackets 

give extra talk-power and overall strength. 

Electrical performance has been increased to a 

new standard by the use of a longer radiator and 

double-matching tuning with linear phasing techniques 

that provide low SWR and more radiated 

energy. The double-matching also provides a 

DC path to ground to drain off precipitation 

static, giving an extremely 

low noise antenna capable of 

high power. 

SPT-500 is specifically designed 

SPT-500 

$ 149 95 

to accept AM-FM-SSB-DSB signals with low loss. Handles 1.5 

killowatts. This antenna is illegal for 11 Meters use. 

Gain (dB) 

5.3 dB 

SWR (at resonance) 

Less than 1.2:1 

Nominal input impedance 

52 Ohms 

Lightning Protection 

DC Ground 

Height 

Twenty-two feet, six inches 

Radial Length 

Eight feet nine inches 

Wind (Survival) 

80 MPH 

Accepted mast size 

11 /4 to 15 SPT-500 ANTENNA SPECIFICATIONS 

/8 inches OD 

Hy-Gain HyTower-Jr TM 

Stands 39 feet tall . . . Full 1/4 Wave on 40, 20, 

15, 10 Meters . . . Cage loading on 80 Meters . . . 

World’s Second Best* Vertical Antenna . . . 

Standing a tall 39 feet with full-size elements 

and rated at 5 KW, the AV-18JR Hy- 

gain HyTower-Jr. TM is the world’s second 

AV-18HTJr. 

$ 95 349 

UPS Shippable 

New! 

best* performing vertical! 

Stub-decoupling is used 

to give full-size quarter 

wave radiators on 40, 20, 

15, 10 Meters with super 

efficient cage loading on 80 Meters. 

The HyTower-Jr TM has almost no losses -your 

ground system determines your efficiency. 

It is automatic bandswitching, fed with 

50 Ohm coax and has low SWR over an 

exceptionally wide bandwidth with SWR 

less than 1.2 at resonance. 

The main radiator is aircraft highstrength, 

heavy walled, 2-inch aluminum 

tubing swedged at the top. Self-supporting 

in winds up to 40 MPH. 

Mounts on 1 1 /4 inch plumber’s pipe. 

Heavy duty components will give you years 

of trouble-free operating pleasure. 

Requires good ground system for optimum 

performance. UPS Shippable. 

*The famous 53 foot Hy-gain HyTower TM 

is legendary. It’s the premier, best performing 

vertical in the world -- bar none! 

At less than half the price with nearly the 

same performance and based on the same 

principles, the HyTowerJr TM is the poor 

man’s version of its father HyTower. 

Of course, Junior TM doesn’t have its 

father’s rugged hot-dipped galvanized steel 

tower and construction! But it is a super 

performer for sure at half the price!

AV-18HT $ 949 95 

Model # 

AV-18HT 

AV-14AVQ 

AV-12AVQ 

AV-18VS 

DX-88 

DX-77A 

AV-18AVQII 

AV-14AVQ 179 95 

AV-12AVQ $ 139 95 

AV-18VS $ 119 95 

DX-88, $ 369 95 

DX-77A, $ 449 95 

HF VERTICALS 

Self-supporting -- no guys required . . . remarkable DX performance -- low angle 

radiation, omnidirectional . . . 1500 Watts . . . Low SWR . . . 2 year limited warranty 

AV-18AVQII $ 239 95 

Free 

Manuals! 

Price 

$949.95 

$179.95 

$139.95 

$119.95 

$369.95 

$449.95 

$239.95 

Bands Max Power 

10,15,20,40,80 1500 W PEP 

10,15,20,40 1500 W PEP 

10/15/20 M 1500 W PEP 

10 - 80 M 1500 W PEP 



10,15,20,40,80 1500WPEP 

Height 

53 feet 

18 feet 

13 feet 

18 feet 

25 feet 

29 feet 

18 feet 

All hy-gain multi-band vertical antennas are entirely self supporting -- no guys 

required. They offer remarkable DX performance with their extremely low angle of 

radiation and omnidirectional pattern. 

All hy-gain vertical antennas handle 1500 Watts PEP SSB, have low SWR, automatic 

band-switching (except AV-18VS) and include a 12-inch heavy duty mast support 

bracket (except AV-18HT). Heavy duty, slotted, tapered swaged, aircraft quality aluminum 

tubing with full circumference compression clamps is used for radiators. 

Includes all stainless steel hardware. Recessed SO-239 prevents moisture damage. 

Hy-gain verticals go up easily with just hand tools and their cost is surprisingly 

low. All hy-gain Verticals feature a two year limited warranty. 

AV-18HT, $ 949.95. 

10/12/15/20/40/80 M 

17 & 160 Meters optional 

Standing 53 feet tall, the famous Hy- 

Gain HyTower is the world’s best performing 

vertical! The AV-18HT features 

automatic band selection achieved 

through a unique stub-decoupling system 

which effectively isolates various sections 

of the antenna so that an electrical 1/4 

wavelength (or odd multiple of a 1/4 

wavelength) exists on all bands. 

Approximately 250 kHz bandwidth at 2:1 

VSWR on 80 Meters. With the addition 

of a base loading coil LC-160Q or MK- 

160A, it also provides exceptional 160 

Meter performance. The 24 foot tower is 

all rugged, hot-dip galvanized steel and 

all hardware is iridited for corrosion 

resistance. Special tilt-over hinged base 

for easy raising and lowering. 53 feet, 

114 lbs. MK-17, $89.95. 17M add-on Kit. 

LC-160Q, $109.95. 160 M loading coil. 

MK-160A, $119.95. 160M 1500W kit. 

DX-88, $ 369.95. 

10/12/15/17/20/30/40/80M 

160 Meters optional. 

All bands are easily tuned with the 

DX-88’s exclusive adjustable capacitors. 

80 and 40 Meters can even be tuned from 

the ground without having to lower the 

antenna. Super heavy-duty construction. 

25 feet, 18 pounds. DX-88 OPTIONS: 

KIT-160-88, $199.95. 160 M add-on kit. 

GRK-88, $99.95. Ground Radial System. 

RRK-88, $99.95. Roof Radial System. 

DX-77A, $ 449.95. 

10/12/15/17/20/30/40 M 

No ground radials required! Off-center-fed 

Windom has 55% greater bandwidth 

than competitive verticals. Heavyduty 

tiltable base. Each band independently 

tunable. 29 feet, 25 pounds. 

Weight 

114 pounds 

9 pounds 

9 pounds 

4 pounds 

24 pounds 

25 pounds 

12 pounds 

Wind Surv. 

75 MPH 

80 MPH 

80 MPH 

80 MPH 

75 mph no guy 

60 mph no guy 

70 mph guy 

Rec. Mast 

------ 

1.5-1.625” 

1.5-1.625” 

1.5-1.625” 

1.5-1.625” 

1.5-1.625” 

1.5-1.625” 

AV-18AVQII, $ 239.95. 

10/15/20/40/80 Meters 

New! The classic is back with 

improved design including three separate 

air dielectric Hy-Q TM traps for 10 through 

80 Meters --1.5 kW PEP. A loading coil 

and an effective radiator is used for 80 

Meters --1kW PEP. 

AV-14AVQ, $ 179.95. 

10/15/20/40 Meters 

The Hy-Gain AV-14AVQ uses the 

same trap design as the famous Hy-Gain 

Thunderbird beams. Three separate air 

dielectric Hy-Q traps with oversize coils 

give superb stability and 1/4 wave resonance 

on all bands. 18 feet, 9 pounds. 

New!MK-80, $79.95. 80 Meter add-on 

kit for AV-14AVQ. Easy to install. Includes 

pre-wound loading coil, hardware. 

AV-18VS, $ 119.95. 

10/12/15/17/20/30/40/80 M 

High quality construction and low cost 

make the AV-18VS an exceptional value. 

Easily tuned to any band by adjusting 

feed point at the base loading coil. Roof 

mount with Hy-Gain AV-14RMQ kit, 

$89.95. 18 feet, 4 pounds. 

AV-12AVQ, $ 139.95. 

10, 15, 20 Meters 

The AV-12AVQ also uses Thunderbird 

beam design air dielectric traps for 

extremely Hy-Q performance. This is the 

way to go for inexpensive tri-band performance 

in limited space. 13 ft., 9 lbs. 

Roof mount with AV-14RMQ kit, $89.95. 

AV-14RMQ, $ 89.95 

Roof Mounting Kit 

The AV-14RMQ roof mounting kit 

provides rugged support for Hy-gain 

models AV-18VS, AV-14AVQ and AV- 

12AVQ. Kit includes base plate, mast, 

radial/guy wires and mounting hardware. 

Hy-Gain Tower Bases 

Specially designed for Hy-gain crank-up towers. 

Complete with base hinge and foundation welded 

steel-cage. Specify tower model. *Must be shipped 

by truck, call for quote. 

Hy-Gain . . . Antennas, Rotators and Towers! 125 

Model# 

TB-37 

TB-52 

TB-54 

TB-70 

Tower 

HG-37SS 

HG-52SS 

HG-54HD 

HG-70HD 

Price 

$299.95 

$299.95 

$299.95 

$349.95 

Weight 

50 lbs.* 

80 lbs.* 

90 lbs.* 

102 lbs.*

HF Multiband Hy-Q trap DOUBLETS 

DP-2BDQ is a multiband 

Hy-Q trap doublet 

for 40/80 Meters, 101 

feet maximum length of 

dipole. 

DP-5BDQ, $259.95. 

80-10 Meters, maxium length of dipole is 94 feet. The Hy-Gain 

DP-2BDQ and DP-5BDQ are Hi-Q trap doublets designed for horizontal 

or inverted “V” rated at legal power. Both feature individually 

pretuned matched traps for each band. 50 Ohm feed. Coaxial 

cable not included. Both handle 2 kW PEP. 

Heavy Duty HY-GAIN BALUNS 


4000W 

BN-86 

$ 79 95 

1.5 kW 

BN-86 is a broadband 50 Ohm 

ferrite balun. It is useable from 

3-30 MHz. 

Rated at 1500 Watts. The BN- 

86 is recommended for all HF Yagi antennas. 

Provides improved front-to-back ratio. 

Includes clamp to bolt to boom, has SO-239 

connector. 

BN-4000 series are broadband 50 Ohm 

Beam current baluns. They are potted to seal 

out moisture. Each handles 4000 Watts. Range 

is 1 MHz to 54 MHz. SO-239 connector. 

BN-4000D, $109.95. For Dipoles. 

BN-4000B 

$ 109 95 

4000 Watts 

BN-4000N, $119.95. 

With “N” connector. 

Hy-gain’s Antenna Feedpoint Pig Tail cable 

has 2-foot length for connecting between antenna 

and your coaxial feedline. Has SO-239 connector APT-2 

on one end and 2 (#10) ring terminals on the $ 95 12 

other end. Provides an easy and reliable connection 

for your feedline with PL-259 connector 

to your antenna feed point. 

Use this for Hy-gain VB series beams and 

other antennas without an SO-239 connector feed point. 

Hy-Gain Lightning Surge Protector 

Safe-guard your 

expensive equipment 

from static electricity 

and lightning induced 

surges on 50 Ohm coaxial line. 

Hy-Gain’s Guardian Angel TM 

Lightning Surge Protector has 

LA-2 

$ 39 95 

DP-2BDQ 

$ 139 95 

DP-5BDQ 

$ 259 95 

40/80 Meters 10-80 Meters 

Hy-gain Antenna Feedpoint Pig Tail 

1.5kWatts 

an Ultra-fast gas discharge tube that 

safely shunts up to 5000 amps of peak impulse 

current harmlessly to an independent ground. 

SWR less than 1.1:1. Less than 0.1 dB loss. Use up to 1000 

MHz. LA-2 handles 1.5 kW PEP. LA-2 does not protect against a 

direct lightning hit. MFJ-97H, $17.95. Replace gas discharge tube. 

Hy-Gain (R) Guy-Wire Gripper 

Hy-gain’s Guy-Wire Gripper turns the horrendous 

job of tightening guy wires into a easy one 

man operation. This wonder tool works together with a 

“come-a-long” cable puller to hold/stretch guy wire or 

cable. Spring loaded for easy operation. Use for guy 

wire or cable up to 1/4” diameter. 

Hy-Gain (R) Arrowpoint Anchor 

Hy-gain’s Arrow Point Anchor is made of high 

quality 13 gauge steel. This 3 inch Arrow Point 

Anchor has a 36 inch integral swiveling 1/8” steel 

cable. Superior pullout resistance up to 2000 lbs. 

Use this ArrowPoint anchor to secure antennas, 

towers, tarps, trees, carports, flagpoles and much 

more. It is easy to install with this optional Hy- 

Gain drive rod, DR-3, $29.95. 

APA-3 

$ 14 95 

126 • Toll-free 1-800-973-6572 

ADJUSTABLE HF DIPOLE ANTENNA 

DP-19PD is a lightweight, adjustable dipole antenna 

that operates anywhere in the 2-30 MHz frequency 

range, including all HF amateur bands 80-10 Meters. 

It is perfect for field day, emregency communications 

or anytime you need to put up a dipole in a hurry. 

DP-19PD uses braided nylon wire rope, the conductors are wired 

into the rope. Uncoil the conductor using the pre-marked frequencies 

for easy installation. One hundred feet of support rope is provided 

on another bobbin on each end of the antenna as well as an 

SO-239 UHF connector on the center insulator. 

Shipping weight is 4.5 lbs. Handles 1 kW PEP. 

HY-GAIN INSULATORS FOR 

MULTIBAND DIPOLE ANTENNA 

C-1, $29.95. 

Center Insulator for 

multiband dipole 

antenna. 

E-1, $6.95. 7-inch 

End Insulator for 

Multiband doublet 

antenna. Set of 2. 

C-1C, $29.95. 

Similar to C-1, but 

has SO-239 

antenna connector. 

Hy-Gain 4 Foot Ground Rod 

Durable four foot copper bonded steel earth 

ground rod is a tough 3/8 in. diameter. Sharp 

E-2, 79 c ea. 

E-2-6, $4.56, 

6-pack. 

Hy-Gain 

glazed ceramic 

insulator 

will not break, arc 

over or melt even 

under full power. 

GR-1 

$ 9 95 

Ship Code B 

pointed end makes it easy to drive it into the ground. Special 

screw-clamp makes it easy to attach ground wires. Helps 

bleed off static, RFI and prevent RF hot spots. Use several 

to form a good RF ground for long wires. 

GC-1 

$ 4 95 

Upper Mast 

Support 

Bracket 

Lower Mast 

Support 

Bracket 

Water pipe ground clamp 

Clamps securely onto water pipe or any 

ground rod. Fits pipe/rod size from 1/2 to 

1 inch. Ground wire hole accepts wire 

sizes up to 9/32 in diameter. Swiveled 1/2 

section allows easy removing. UL/CUL listed. 

A. 3/32 Dacron Wire Rope. 

Fine copper wire is webbed Dacron 

rope. Extremely flexible but super 

strong, light. Ideal for wire antennas. 

DWR-120, 120 Ft., $49.95. 

B/C. Wire Antenna Installation Rope. 

Select MFJ Nylon or Polyester dacron 

rope for your wire antenna installations. 

Black and UV resistant. 

Hy-Gain (R) 

Self-Supporting Tower 

DP-19PD 

$ 279 95 

160-10 Meters 

This heavy-duty three-foot tripod selfsupporting 

tower supports masts up to 

1.75 inches diameter and will support 

most Hy-Gain vertical antennas. TP-3 does 

not include a mast. 

TP-3 features a universal mast clamp and 

bottom support bracket that helps stabilize 

your antenna system. TP-3 will also fold 

TP-3 

$ 95 59 

for easy storage and traveling. 

Bolt-on swivel feet adjust to most any 

type roof or other surface. It is quick 

and easy to put up your antenna system 

using screws in the three base 

feet. And . . . you can rest assured 

GWH-1 

$ 95 24 

Bolt-on Swivel that your tower is securely anchored 

Base Feet have for trouble-free service. A torque 

a torque lock-nut lock-nut is used for the bolt-on feet. 

and adjust for TP-3 is hot-dip galvanized for 

most any type long-lasting protection from the out- 

of roof or other door elements. Get your antenna up- 

surface. 

in-the-air where it belongs! 

Hy-Gain Antenna Wire and Rope 

A B nylon C polyester 

RPA-100, $9.95. 100 feet, 3/32 inch 

nylon rope. 

RPA-250, $18.95. 250 feet, 3/32 inch 

nylon rope. 

RPC-100, $12.95. 100 ft, 3 /16 inch 

polyester rope. 

RPC-250, $29.95. 250 ft., 3 /16 inch 

polyester rope.

Hy-Gain (R) 160-6 Meters Self-Supporting Vertical Antenna 

Full 1500 Watts, 43 feet, includes base mount, great for stealth 

AV-6160 

$ 95 399 

Ship Code E 

AV-6160 includes 

this base mount 

and legal limit 

balun!!! 

Operate all 

bands 160-6 

Meters at full 

1500 Watt with 

this self-supporting, 

43 feet 

high performance 

vertical! 

It assembles in 

less than an 

hour and its low 

profile blends in 

with the sky and 

trees -- you can 

barely see it . . . 

Exceptional 

Performance 

The entire length 

radiates to provide 

exceptional low angle 

radiation 160-20 

Meters and very good 

performance on 17-6 

Meters. 

You can shorten it 

by telescoping it down 

for more effective low 

angle radiation on 

higher bands. 

Just talk with automatic 

tuner! 

A wide-range automatic or manual antenna tuner at your rig 

easily matches this antenna for all bands 160-6 Meters. 

There’s no physical tuning adjustments on the antenna -- you 

1.5kW 80/160M high-efficiency Matching Network 

AV-6110 improves efficiency on 160 and 80 

Meters for the popular new 43-foot all band 

vertical antennas by eliminating SWR-related 

coax and unun mismatch losses. When fed 

with a 1:4 unun, the 43’ antenna has a reasonable 

compromise SWR on 60-10 Meters. However, at 

New! 

AV-6110 

$ 95 299 

Ship Code B 

160/80 Meters it is virtually impossible to match this antenna 

because of the low radiation resistance. If you are using low 

loss coax, you will lose much power in the coax and unun due 

to bad antenna mismatches. Installed at the base of the 43’ 

vertical, AV-6110 will significantly eliminate these losses and 

put 160 and 80 Meters back within the tuning range of the 

tuner inside the shack. Includes high-voltage insulated base 

tube, remote power injector with switch for 160, 80 Meters and 

off positions. Handles 1.5kW. Matching box mounted in a 

rugged, weather-resistant PVC housing, 3Wx16Hx3D inches. 

New! 600 Watts 80/160 Meter Matching Network 

AV-6108, $249.95. Has all features of the AV-6110, but handles 

600 Watts on 80 and 300 Watts on 160M. 3Wx11Hx3D”. 

160 Meter Tuner Range Extender for 43’ Verticals 

AV-6104 

$ 79 95 

Ship Code B 

Forty-three foot vertical antennas have become very 

popular in recent years. However, on 160 Meters, these 

antennas have a very high reactance and high voltage at 

the antenna feedpoint. Tuning with a tuner results in maximum efficiency 

80-10 Meters, but conditions at 160M present a major challenge 

for most tuners. To get around this problem, add the range extender to 

the base of the antenna to increase 160M matching capabilities. Reduces 

reactance and puts the antenna in range of the automatic or 

manual tuner. Potentially damaging high-voltage currents are reduced -- preventing 

damage to the tuner. 1.5 kW. Weather-resistant PVC, ceramic feedthru connectors for 

input/output. Shorting jumper connection when 160 Meters is not in use. 3 1 /2Wx3 1 /2 

Hx11D”. Use with MFJ-998RT/MFJ-994BRT or other automatic/manual tuners. 

AV-6102, $59.95. Like AV-6104, 300 Watts, 5-way binding posts for in/out. 3 1 /2W 

x3 1 /2Hx7D”. Use with MFJ-926B/927/993BRT auto tuners or manual tuners. 

simply put it up! Includes ATB-65 base mount. See below. 

An optimized balun design allows direct coax feed with negligible 

coax loss (typically less than 1 /2 dB 60-6 Meters and less than 1 

dB 160-80 Meters with good quality, low-loss coax). 

Extremely low wind loading 

With just 2 square feet wind load, the AV-6160 has the lowest 

wind-loading and lowest visibility of any vertical antenna! 

The key is a six foot section of tapering diameter stainless 

steel whip that flexes in strong wind instead of stressing the 

bottom sections. Its 2-inch O.D.and .120 inch thick walled 

tubing bottom section makes it incredibly strong. 

Just 20 lbs., uses super-strong 6063 aircraft aluminum 

tubing. Stainless steel hardware. 

Assembles in an hour 

Ground mounting lets you hide antenna base in shrubbery. 

Requires ground system -- at least one radial. More 

extensive ground systems work even better. Optional GRK- 

6160, $34.95. All-band ground radial kit. See bottom right. 

Stealth Operation 

Low profile. Hide behind trees, fences, buildings, bushes. 

Use it as a flagpole. It easily telescopes down during the day. 

64’, 11-Sect. Telescopic Aluminum Mast 

Includes one size of each slitted tube ATM-65 

listed above and ten hose clamps. This is a $ 95 

super-strong heavy duty telescoping MAST, 199 

Ship Code D 

not a flimsy pole! Mast is made of .120 

inch thick wall aluminum tubing. ATM-65 is 

64 feet fully extended and 6 feet collapsed without 

clamps. Guying is required if mast is extended 

beyond 30 feet. Top section is .625” OD. Bottom 

section is 2 inches OD x .120 wall. 

Base Mount for Fiberglas 

and Aluminum Masts 

ATB-65, $69.95. Complete base assembly kit 

with mounting plate, insulators, hardware, 

SO-239, etc. for fiberglass and aluminum masts. 

Fits up to 2.0” OD masts. 

Universal Vertical Tilt Base 

AV-6110 

80/160 Meter 

Matching 

Network New! 

A unique 

design allows 

this tilt base 

to fit most vertical antennas 

with or without a base 

bracket. Pre-punched 

hole makes it easy to mount 

many different type of verticals. Fits 

Hygain’s AV18VS/14VS/18AVQ/640/620/ AV- 

6160, and MFJ-1796/1798/2990 and others with 

tube bases or mast pipes up to 2 1 /4” OD. Mount 

one side of the tilt base to the mast and the other 

to the antenna base. No climbing a ladder -raise 

your antenna up/down easily before severe 

weather by yourself -- just walk it up or walk it 

down. Ground radial holes also provided. 1/8” 

thick aluminum. Includes (4) 2 1 /4” U-bolts, mast 

saddles and stainless steel nuts/bolts. 

All-band Ground Radials 

All-band ground 

radial system for 

the AV-6160 and 

ATB-75 

$ 69 95 

Ship Code B 

GRK-6160 

$ 34 95 

Ship Code A 

other verticals requiring a 

radial system. Convenient 

and effective, it provides 

the necessary return path for ground currents to 

reduce ground losses. Consists of 2 sets of 4 radial 

wire assemblies giving a total of eight 14’ radial 

wires. Each 1/4” ring lug for attaching to the 

antenna ground point. Each end of the radial 

wires has a solder lug for staking the wire end. 

www.hy-gain.com 127

ROHN 

Hy-gain Vertical Antenna Mounting Hardware 

TM Steel Telescopic Masts & 

Vertical Mounting Accessories 

20/30/40/50 foot Telescoping Masts 

Telescoping masts are pre-galvanized and come preassembled 

with hardware. Erecting mast is made by simply connecting 

guys and brackets to the attached heavy duty rolled edge guy 

rings and clamps, extending the sections, inserting locking cotter 

pins, rotating tubes to locked position and tightening the 

clamps. Features interior tube flanging combined with doublecrimped 

exterior tube to produce stronger, more stable joint 

than common masts. Also prevents sections from accidentally 

pulling apart and allows easy disassembly, pulling each section 

through lower end. Each section extends deeper into lower 

tubes than other designs, adding more structure stability. 11 /4”, 

16-gauge galvanized tubing for top, other sections are 18 gauge. 

H-20, $79.95. 19 feet extended, 2 sections. 




All above models ship by truck only. 

H-950, $219.95. 34’ ext., 5 sect. UPS shippable. 

Deluxe "Y" Wall Mount Bracket 

WMD-12, $49.95. 12-inch standoff with 3rd Leg for 

Mounting of Antenna Masts from 1 inch to 1.75 diameter 

and up to 10 foot Height, Standoff from Wall by 12 inches. 

48” Galvanized Eave Mount Bracket 

EVE-48, $39.95. Mount your mast on eave of 

a house. Lower Bracket is 16 gauge Hot Dip 

Galvanized steel, 48”. Both upper/lower 

brackets are for masts up to 21 /4” diameter with 

clamps, bolts and 21 /2” lag screws. Mast can 

pass by lower Bracket for ground mounting. 

Will stand-off mast 21 /4” from surface. 

Antenna Mast Chimney Mount 

EZ-29, $39.95. Four inch Stand-off, Deluxe 

"Y" with 18 Feet of Stainless Steel Straps to 

Wrap around Chimney. 

5 Foot Galvanized Mounting Pipe 

HG-5, $29.95. 5 feet, 2 inches OD, 16 AWG 

Galvanized steel Antenna Mast Pipe. 

A B 

C D 

E 

F 

A. 463011, $14.00, Base tube insulator, fits 1 1 /4” OD tube. Six 5 /16” 

mounting holes. Super strong, made of fiberglass filled ABS. Used in 

Hy-tower to isolate tower legs from ground. 

Tube not included. 

B. 877130, $28.64, Vertical antenna bracket assembly. Includes bracket 

(C), base cover insulator (D), support insulator (E) and SO-239. Tube 

not included. Fits 1 1 /4” tubing. 

C. 160043-1, $11.84, Base mount bracket. Custom-tooled 1 /8” thick x 

12 inch length aluminum bracket with vertical ridges for super strength. 

Pre-punched holes for SO-239 or N-connector. 

D. 863427, $6.90, Base cover insulator. Allows attachment of base 

tube. Has hollow center for antenna connector. Mold-in pin connects 

base tubing to connector. 

E. 463056, $3.12, Base antenna support insulator. Made to fit top support 

of antenna bracket (C). Hole fits 1 1 /4” OD tubing. 

F. 460316, $12.96, Tubing coupler and insulator. Used to couple or 

insulate one inch tube to 7 /8” tubing. Made of fiberglass filled ABS, 5 

inches long. 

Part No. Price Description 

745-3104S $0.90 #4 Clamp for 3./32” OD to 5/8” OD tubing 

745-3106S $1.00 #6 Clamp for 3/4” OD to 7/8” OD tubing 

745-3108S $1.00 #8 Clamp for 7/16” OD to 1” OD tubing 

745-3110S $1.25 #10 Clamp for 1” OD to 1 

745-3112S $125 

745-3116S $1.25 

745-3120S $1.25 

745-3128S $1.75 

1 /8” OD tubing 

#12 Clamp for 9/16” to 1/4” OD tubing 

#16 Clamp for 11 /4”OD to 15 /8” OD tubing 

#20 Clamp for 3/4” OD to 13 /4” OD tubing 

#28 Clamp for 15 810-2000I-6W, $33.60 each. Unique tubing has one end slitted and 

one end swaged to make it stackable. Join one end to other to make 

a longer pole. Secure with standard host clamp. Strong, 2”OD x .120” 

wall. Good for base sections of vertical antennas. Standard 6-ft. length, 

longer sections, to 20 ft. available. Add $4.78 each add’l foot. 6 ft. 

lengths ship by UPS, longer units must ship UPS oversize/truck. 

Hy-gain Stainless Steel Hose Clamps 

/8” OD to 2” OD tubing 

Hy-gain Custom Made Precision Antenna Hardware 

BMC-249, $79.95. Boom to Mast Clamp 

Heavy duty 11 /4” OD thick aluminum die casted boom to 

mast clamp designed specifically for securing heavy 

antennas. It is capable of supporting 2” boom antennas, 

such as the TH-11DX, Long John Monobanders and 

other beams with a 2” boom. The BMC-249 allows mast 

to extend past the top of the clamp. This feature allows 

stacking of several antennas on one mast. Clamp is adjustable for mast sizes from 

11 /4” to 23 /4” OD. The tilt-over feature permits easy assembly of the elements and 

simplifies maintenance of the antenna. 4Wx4Hx11 /4” thick. Kit comes 

complete with stainless steel hardware. 

Element Insulators These element insulators are made to fit the 

element bracket (right). Precision injection molded with black UV resisted ABS plastic. 

Part No. Price Fits these 

Element sizes 

7 465216 $3.42 /16” OD 

5 461057 $4.40 /8” OD 

7 463767 $4.40 /8” OD 

465833 $4.80 1 

Hy-gain TH-series HF Beam Trap Caps 

A. 464723, $.75 ea. Trap caps, for large Hy-gain TH-series traps. 

B. 466221, $1.59 ea. Trap caps for Hy-gain TH-3Jr. traps. 

1 Insulator 

Size 

7 3 /8”OD x 2 /4” 

1 

/4” OD 

1 /4” OD x 3” 

11 /4” OD x 3” 

11 Fits Element to 

boom clamp 

163409 

165919 

165919 

/2” OD x 4” 165920 

B 

128 www.hy-gain.com • Toll-free 1-800-973-6572 

A 

Hy-gain Aluminum Tubing 

6063 T832 round, drawn aluminum tubing sold in 2 styles: 

standard or slitted one end, (.083” gaps, 1-2” slit lengths). 

Available in 3 foot or 6 foot lenghts. Tubings are sized to allow 

telescoping into one another from 3/8” OD to 2 

$/Ad ft. 

$0.79 

$0.82 

$1.04 

$1.25 

$1.33 

$1.43 

$1.58 

$1.77 

$1.95 

$2.17 

$2.50 

$2.65 

$2.65 

$2.88 

$4.78 

$3.10 

$3.68 

$4.65 

1 /2” OD. Select 

slitted for telescoping. Use Hy-gain hose clamps to secure. 

6’ Lg OD x Wall x ID P/N No slit, Price/ea P/N Slitted Price/ea. 

0.375”x.058”x0.250” 810-0375E-6U $4.72 810-0375E-6S $5.22 

0.500”x.058”x0.375” 810-0500E-6U $4.88 810-0500E-6S $5.38 

0.625”x.058”x0.555” 810-0625E-6U, $5.79 810-0625E-6S, $6.29 

0.750”x.058”x0.634” 810-0750E-6U, $6.99 810-0750E-6S, $7.49 

0.875”x.058”x0.759” 810-0875E-6U, $7.49 810-0875E-6S, $7.99 

1.000”x.058”x0.884” 810-1000E-6U, $8.09 810-1000E-6S, $8.59 

1.125”x.058”x1.009” 810-1125E-6U, $8.99 810-1125E-6S, $9.49 

1.250”x.058”x1.134” 810-1250E-6U, $10.09 810-1250E-6S, $10.59 

1.375”x.058”x1.259” 810-1375E-6U, $11.19 810-1375E-6S, $11.69 

1.500”x.058”x1.384” 810-1500E-6U, $12.49 810-1500E-6S, $12.99 

1.625”x.058”x1.509” 810-1625E-6U, $13.99 810-1625E-6S, $14.99 

1.750”x.058”x1.634” 810-1750E-6U, $14.89 810-1750E-6S, $15.89 

1.875”x.058”x1.751” 810-1875E-6U, $15.99 810-1875E-6S, $16.99 

2.000”x.058”x1.884” 810-2000E-6U, $18.75 810-2000I-6S, $19.75 

2.000”x.120”x1.760” 810-2000I-6U, $27.49 810-2000E-6S, $28.60 

2.125”x.058”x2.009” 810-2125E-6U, $20.65 810-2125E-6S, $21.65 

2.375”x.058”x2.259” 810-2375E-6U $23.89 810-2375E-6S, $24.89 

2.500”x.058”x2.384” 810-2500E-6U, $26.15 810-2500E-6S, $27.15 

3’Lg OD x Wall x ID P/N No Slit, Price/ea P/N Slitted Price/ea. $/Ad ft. 

0.375”x.058”x0.250” 810-0375E-3U, $2.36 810-0375E-3S, $2.61 $0.79 

0.500”x0.58”x0.375” 810-0500E-3U, $2.44 810-0500E-3S, $2.69 $0.82 

0.625”x.058”x0.555” 810-0625E-3U, $2.89 810-0625E-3S, $3.14 $1.04 

0.750”x.058”x0.624” 810-0750E-3U, $3.49 810-0750E-3S, $3.74 $1.25 

0.875”x.058”x0.759” 810-0875E-3U, $3.75 810-0875E-3S, $3.99 $1.33 

1.000”x.058”x0.884” 810-1000E-3U, $4.05 810-1000E-3S, $4.29 $1.43 

1.125”x.058”x1.009” 810-1125E-3U, $4.50 810-1125E-3S, $4.75 $1.58 

1.250”x.058”x1.134” 810-1250E-3U, $5.05 810-1250E-3S, $5.29 $1.77 

1.375”x.058”x1.259” 810-1375E-3U, $5.60 810-1375E-3S, $5.85 $1.95 

1.500”x.058”x1.384” 810-1500E-3U, $6.00 810-1500E-3S, $6.50 $2.17 

1.625”x.058”x1.509” 810-1625E-3U, $7.00 810-1625E-3S, $7.50 $2.50 

1.750”x.058”x1.634” 810-1750E-3U, $7.45 810-1750E-3S, $7.95 $2.65 

1.875”x.058”x1.751” 810-1875E-3U, $8.00 810-1875E-3S, $8.50 $2.65 

2.000”x.058”x1.884” 810-2000E-3U, $9.38 810-2000E-3S, $9.88 $2.88 

2.000’x.120”x1.760” 810-2000I-3U, $13.75 810-2000I-3S, $14.35 $4.78 

2.125”x.058”x2.009” 810-2125E-3U, $10.33 810-2125E-3S, $10.83 $3.10 

2.375”x.058”x2.259” 810-2375E-3U, $11.95 810-2375E-3S, $12.45 $3.68 

2.500”x.058”x2.384” 810-2500E-3U, $12.08 810-2500E-3S, $15.38 $4.65 

Element to Boom Clamps 

Made from high tensile strength aluminum alloy. 

Custom die is used to stamp these clamps. No 

miss-drilled holes. They fit perfect everytime. 

Required 2 clamps per element. Element 

Insulators available (left). 

Description 

21 /2x7”x.08 Thick, #12 

23 /8x71 /8”x.08 Thick, #4 

31 /4x71 /4”x.125 Thick, #13 

31 /4x91 /2”x.125 Thick, #14 

3 /4x5”x.063 Thick, #0 

21 /2x61 /2”x.08 Thick, #11 

25 /16x65 /8”x.08 Thick, #12 

23 /4x65 Part# Price Element OD 

w/o insulator w/insulator 

5 161409 $2.71 /8” --- 

7 7 163764 $3.80 /8” /16” 

165919 $5.32 1 

165920 $6.28 

160055 $1.22 

161422 $3.63 

165141 $3.76 

165138 $5.20 

/8”x.08 Thick, #1 

872223 $6.60 

1 /4” 5 /8”, 7 /8” 

11 /2” 11 /4” 

7 

/16” --- 

5 /8” --- 

7 7 /8” /16” 

11 /4” 5 /8”, 7 Boom 

Insulator 

OD” 

2” 

None 

2” 

465216 

2” 

463767, 461057 

2” 

465833 

1 None 

None 

465216 

/8” 

463767, 461057 

1 /4” 

11 /4” 

11 /4” 

11 /4” 

Stainless steel screws, nuts and washers for 1 set of element-to-boom clamp

MIRAGE 2013 CATALOG 

VHF/UHF Solid State Amplifiers 

Turn your mobile, base or handheld into 160 Watt powerhouses and talk further, longer, clearer . . 

. All modes: FM, SSB, CW . . . Superb GaAsFET preamp . . . Has exclusive Active-Bias TM system 

for crisp, clear voice in SSB mode . . . True push-pull circuitry and clean RF layout for excellent 

stability . . . Overdrive and high SWR protection . . . Remote controllable with RC-2 . . . 

MIRAGE’s most popular amplifier gives 

you 160 Watts of output power for just 25 W in 

from your base/mobile rig! 

The B-2518-G is ideal for your 20 to 60 Watt 

2 Meter mobile or base station. 

You’ll talk further, longer, clearer on all modes -- FM, SSB, 

CW -- hear weak signals better than you’ve ever heard before! 

You get a low noise 20 dB GaAsFET preamp with an excellent 

1 dB noise figure for pulling out weak signals. 

B-2518-G is fully protected with features found in expensive 

commercial amplifiers. 

High SWR or excessive input power can damage your amplifier. 

Protection circuits automatically bypass your amplifier to prevent 

damage and an LED lights to warn you. 

Active-Bias TM gives crisp, clear voice in SSB mode! 

New! An Active-Bias TM System keeps SSB voice crisp and clear 

for fantastic operation. Other amplifiers using conventional bias 

methods tend to produce splatter and distortion as power level 

changes. This amp with Active-Bias TM doesn’t exhibit the problem. 

Adjustable time delay gives you smooth transmit/receive 

switching. Remote external keying. You can remotely control 

your B-2518-G and place it out of the way. An RC-2, $49.95, 

Remote Control turns Power on/off, Preamp On/Off and select 

SSB/FM. Extra heavy duty custom heatsink spans 

the entire cabinet. Draws 17-22A from 13.8 VDC. 

Compact 12x3x5.5 inches. 

Amp Remote Control 

Remotely control your B- 

2518-G/B-5018-G/B-1018-G 

and place it out of the way. 

An RC-2, $49.95, Remote 

Control lets you turn power 

on/off, preamp on/off, select SSB/ FM. Other Mirage 

. . . 160 Watts on 2 Meters! 

B-2518-G 

$ 369 95 


MIRAGE RUGGED! 

amps use RC-1. Call Mirage for positive compatibility. 

More 160 W, 2 Meter Amps 

B-5018-G, $369.95. For 20 to 60W mobile or base stations. 

160 W out for 50W in. 

B-1018-G, $409.95. 160 Watts out for 8 Watts in. For 0.25-15 

Watt transceivers. 

Power Curve -- typical output power in Watts 

B-1018-G 25 50 

B-2518-G 5 7 

B-5018-G -- 2 

Watts In 0.5 3 

140 150 160 160 -- -- -- -- -- 

40 60 80 100 125 160 160 160 -- 

15 25 40 50 70 100 130 160 -- 

0.25 5 8 10 15 25 35 50 -- 

MIRAGE . . . 300 BruteForce TM Watts on 2 Meters! 

The MIRAGE B-5030-G gives you 300 Watts 

of brute power for 50 Watts input on all modes -- 

FM, SSB, or CW! 

Ideal for 20 to 60 Watt 2 Meter mobile or base. 

Power Curve chart shows typical output power. 

Hear weak signals -- low noise GaAsFET preamp gives you 

excellent 1 dB noise figure. Select 15 or 20 dB gain. 

Heavy-duty heatsink spans entire length of cabinet -- prevents 

overheating. Power transistors protected by Mirage’s Therm-O- 

GuardTM B-5030-G 


. 

Fully protected from high SWR and excessive input power. 

Has warning LED. Has smooth adjustable Transmit/Receive 

Power Curve -- typical Mirage B-5030-G output power switching with remote external keying. 

Draws 48 amps at 13.8 VDC. Measures 12x12x5 inches. 

B-5030-G -- -- -- 55 150 220 300 More 300 Watt 2 Meter Amplifiers . . . 

B-2530-G, $739.95. For 10 to 35 Watt mobile or base sta- 

B-2530-G 10 30 95 140 250 300 -- tions. 300 Watts for 25 Watts in. 

B-1030-G, $759.95. Mirage’s most popular dual purpose 

B-1030-G 30 80 225 270 300 -- -- HT or mobile/base amplifier. 300 Watts out for 10 Watts in. 

For 0.2-15 Watt transceivers. 

Watts In .5 1 3 5 10 25 50 Uses RC-1, $49.95, Remote control. 

Mirage Rugged! 

www.mirageamp.com • Toll-free 1-800-647-1800 129



All UHF models feature all modes: FM, SSB, CW, 

adjustable delay for SSB and remote control outlet. 

They also have a heavy duty heatsink that spans entire 

length of cabinet, 50 Ohm impedance input and output, 13.8 

VDC voltage. 

D-3010-N -- 100 W out/30W in. For 5 to 45 Watt 

mobile/base. 

D-1010-N -- 100 Watt/10W in. For handhelds or 

mobile/base. 

MIRAGE D-Series Specifications 

Model # Price Input Output Current 

D-1010-N 

D-3010-N 

MIRAGE 223-225 MHz Amplifiers 

Choose from 9 different models -- 20 to 

220 Watts out for 2 to 50 Watts in, $169 to 

$739. Extra heavy duty heatsink spans the 

entire length of cabinet. 

Protection circuits automatically bypass 

MIRAGE C-Series Specifications 

Model # Price Input Output Current 

C-22-G 

C-211-G 

C-106-G 

C-1012-G 

C-2512-G 

C-5012-G 

C-1022-G 

C-2522-G 

C-5022-G 

$169.95 

$369.95 

$269.95 

$369.95 

$345.95 

$365.95 

$759.95 

$759.95 

$739.95 

$449.95 

$419.95 

.1-5 W 

.3-5 W 

.3-15 W 

.3-15 W 

.3-40 W 

.35-55 W 

.25-10 W 

.25-30 W 

.35-55 W 

3-36 W 

50-126W 

3-60 W 

6-120 W 

.5-120 W 

3-120 W 

40-220W 

1.5-220W 

5-220 W 

.30-15 W 

5-45 W 

5 amps 

25 amps 

12 amps 

20 amps 

18 amps 

18 amps 

48 amps 

48 amps 

48 amps 

...6MeterAmplifier 

Bust through 6 Meters with 150 Watts of brute power and work exotic DX! 

Low Noise GaAsFET Preamp 

A built-in low noise GaAsFET receive preamp 

gives you 20 dB gain -- lets you dig out weak signals 

and score exotic DX on sporadic E! 

The A-1015-G is the world’s most popular all mode 

FM/SSB/CW 6 Meter amplifier. 

Bust through 6 Meters with 150 Watts of brute power and work 

exotic DX! Power Curve chart shows typical output power. 

The A-1015-G is ideal for your 1 to 15 Watt transceiver, mobile 

or base station. 

You’ll talk further, longer and clearer on all modes -- FM, SSB 

or CW. Hear weak signals better than you’ve ever heard before! 

Get up to 150 powerful Watts! 

Extra heavy-duty heatsink spans entire length of cabinet. 

Draws 18-22 amps at 13.8 VDC. Weighs just 5 pounds, 

measures a compact 12x3x5.5 inches. 

D-1010-N 

$ 449 95 

A-1015-G 

$ 389 95 


5-110 W 

7-100 W 

FCC Type Accepted 

MIRAGE 420-450 MHz AMPLIFIERS 

20 amps 

20 amps 

your 

amplifier 

to prevent 

damage 

and an 

LED 

lights to 

warn you. 

Your 

expensive power transistors are protected 

from overheating by Mirage’s exclusive 

Therm-O-Guard TM . 

Automatically shuts down and bypasses 

your amp if needed. All Mirage C-Series 

have a 20 dB GaAsFET preamp. 

Power Curve -- Typical A-1015-G Output Power in Watts. 

Watts Out 6 22 42 63 84 98 122 142 150 

Watts In .25 1 2 3 4 5 7 9 10 

D-3010-N 

$ 419 95 

MIRAGE Amateur Television Amplifiers 

SPECIFICATIONS 

RF POWER IN. . . . . . . . . 

RF POWER OUT . . . . . . . 

CURRENT . . . . . . . . . . . . 

SIZE . . . . . . . . . . . . . . . . . 

WEIGHT . . . . . . . . . . . . . 

Specially designed for Amateur Television, 420-450 MHz 

D-1010-ATVN, $ 469 95 

10W In-52W Out (ATV-AVG) 

10W In-82W Out (ATV-PEP) 

10W In-100W Out (SSB/FM) 

D-100-ATVN, $ 479 95 

2W In-52W Out (ATV-AVG) 

2W In-82W Out (ATV-PEP) 

2W In-100W Out (SSB/FM) 

D-1010-ATVN 

D-100-ATVN 

1 Watt to 15 Watts 500 mWatts to 5 Watts 

100W(SSB/FM) 52W(ATV) 52 Watts 

20 Amps 

20 Amps 

12x3x5.5 inches 

12x3x5.5 inches 

6 pounds 

6 pounds 

RC-1 - Remote Control Head 

Use with Most Models 

RC-1 

$ 49 95 


FEATURES 

• Easy remote operation with most models 

• Preamp on/off 

• Switch for SSB/FM operation 

• 18 foot cabling included - Available in 

long lengths with special order 

• Size: 3 1 /2Wx2 3 /4Dx1 1 /2H inches 

• Mod required for some models 

•Compatible with all Mirage amps except 

for the following amplifiers: B-XX18-G, B- 

24-G, B-34, B-34-G, B-310-G, B-320-G, 

BD-25, BD-35, B-510-G, C-22-G, D-15-N, 

D-26-N, M-120-G, PAC-1070-B, PAC-15- 

100C, PAC-30-130-B. 

Commercial Grade Amplifiers 

Commercial Amplifiers 

are available for 150-174, 

450-470 MHz and VHF 

MIRAGE Commercial Amplifier Specifications 

Model Price Input Output Preamp Range 

B34GC 

Pac1070B 

Pac15100C 

Pac30130B 

130 MIRAGE . . . The World’s Most Rugged VHF/UHF Amplifiers 

$159.95 

$299.95 

$429.95 

$359.95 

.5-3 W 

10-30 W 

5-25 W 

10-30 W 

10-30 W 

5-70 W 

5-100 W 

1-100W 

PAC-30-130B 

$ 359 95 


marine bands, 70-100 Watts out. Most feature 

over-temperature sensing that bypasses 

amplifier when safe operating temperatures 

are exceeded; heavy duty heatsinks finned 

on 3 sides; and wide input power range. 

These amps were designed for two-way 

radio signal commercial, mobile, or fixed 

location use. All are FCC type accepted. 

Yes 

No 

No 

No 

150-162 

150-174 

450-475 

150-174

Mirage 2-Meter/440 MHz Amplifiers for HTs! 

Boost your dual band HT to 45 Watts on 2 Meters or 35 W on 440 MHz! 

• 45 Watts Output on 2 Meters • 35 Watts output on 440 MHz 

• New! D*STAR COMPATIBLE! 

• Reverse Polarity Protection 

• Free Mobile Bracket Included 

• Works with all major brand Handhelds up to 8 Watts 

• Auto RF sense T/R switch 

Add this MIRAGE BD-35 dual band amp and boost your 

handheld to a much more powerful mobile or base -- 45 Watts on 2 

Meters or 35 Watts on 440 MHz! Get 35 Watts out with just 4 

Watts in! BD-35 is now D-STAR compatible! 

MIRAGE 2-Meter Amplifiers for HTs B-310-G . . . 100 W on 2 Meters 

B-34-G 

$ 95 129 

Suggested 

Retail 

BD-35 

$ 199 95 


B-34 

$ 109 95 

Suggested 

Retail 

Add this MIRAGE amp 

to your 2 Meter handheld 

and get 35 Watts output . . . 

talk further, longer, clearer . 

. . It’s the best HT amplifier 

$129.95 can buy! 

Here’s why: 

First-class strip-line 

techniques and modular construction gives superb RF performance 

and unsurpassed reliablity . . . 

Custom wrap around heatsink provides excellent heat distribution 

-- runs cool for extra long life. Reverse polarity protection can 

save your amp and your pride if you connect power backward . . . 

Automatic RF sense transmit/ receive switch makes operation 

super easy. Low input SWR keeps your handheld safe from overheating. 

Individual pushbutton switches lets you select FM/SSB 

operation, receive preamp on/off and power on/off. 

LEDs show On-Air, receive preamp on and power on. 

5 1 /4x1 3 /4x4 3 /4”. Free mobile mount bracket, hardware. 

B-34, $109.95. Like B-34-G but FM only, less preamp, mobile 

bracket. Super tiny 3 1 /8x1 3 /4x4 1 /4 inches. 

Power Curve -- typical Mirage B-34-G amplifier output power 

B-34-G 

Watts Out 

B-34-G 

Watts In 

Add this amp to your 2 Meter HT or mobile radio and get 200 

Watts brutal output. Talk further, longer, clearer! 

Has 15 dB GaAsFET preamp, works all modes FM/SSB/ CW. 

Fully protected by high SWR protection. Includes mobile mounting 

bracket. An input level switch selects proper input power from 

your HT or mobile radio. Low power input for hand-held radios, 250 

mW to 10 Watts. 1/4 Watts in gives 132 Watts output. 3 Watts 

input from your HT gives full power output. 

High power input for mobile radios, 10 Watts to 50 Watts. 10 

Power Curve -- typical B-320-G output power 

Watts Out 

Mobile Amp 

Watts Out 

HT Amp 

Watts In 

1.5 

132 

.25 

4 

165 

0.5 

32 

200 

3 

95 

-- 

10 

165 

-- 

25 

186 

-- 

35 

D*STAR 

Compatible! 

8 12 18 30 33 35 35 35 35 35 

.25 0.5 1 2 3 4 5 6 7 8 

193 

-- 

40 

200 

-- 

50 

MIRAGE’s exclusive FullDuplex Amp TM lets you talk on a band 

and listen on another band at the same time -- just like a phone 

conversation (requires compatible HT). 

Features auto band selection, reverse polarity protection, onair 

leds, single connector for dual band radios/antennas, free 

mobile bracket and more! 

Works with HTs to 7 Watts. Super compact 5Wx11 /2Hx5D 

inches. Draws 7 Amps at 13.8 VDC. 

Power Curve -- typical Mirage BD-35 output power 

Watts Out 

(2 meters) 

Watts Out 

(440 MHz) 

Watts In 

Reach distant 

repeaters . . . 

Log onto faraway 

packet bulletin boards . . . 

This rugged Mirage B- 

310-G amplifier operates 

all modes: FM, SSB and 

CW. It’s the perfect 

match for all HTs up to 8 Watts and multi-mode 

SSB/CW/FM 2 Meter rigs. 

Built-in low noise GaAsFET receive preamp gives 

you 15 dB gain -- lets you dig out weak signals. 

SWR and Reverse Polarity Protection. 

Mirage’s integrated HeatsinkCabinet TM and whisper quiet fan 

gets heat out fast! 

The results? 

An ultra-compact 4 3 /4x1 3 /4x7 3 /4 inch 2 1 /2 pound amplifier that 

delivers a super powerful 100 Watts. 

Free 3 foot handheld to B-310-G coax cable and mobile bracket! 

Automatic RF sense Transmit/Receive switch. Remote keying 

jack. LEDs monitor “On-Air”, high SWR, pre-amp, power. 

Push buttons select SSB/FM, pre-amp, power. Draws 15 Amps 

at 12-15 VDC. Full one year MIRAGE warranty 

With MIRAGE’s legendary ruggedness, you may never need 

our superb warranty. 

Watts input gives 

95 Watts output. 

50 Watts input 

B-320-G 

$ 499 95 


gives full power output. 

Custom wrap-around heatsink 

gives excellent heat dissipation. 

Superb Mirage Warranty. 

SMA/BNC Cables and Adaptors 

A. B. 

Release strain on your HT’s antenna 

connector! Choose SMA or BNC. 

Flexible, mini coax, 3 feet. 


each. SMA female 

to BNC male adaptor. 

10 18 30 40 45 45 45 45+ 45+ 

4 10 16 26 32 35 35 35+ 35+ 35+ 

.25 0.5 1 2 3 4 5 6 7 8 


each. SMA male to 

BNC female adaptor. 

B-310-G 

$ 249 95 

Suggested 

Retail 






each SMA male to 

SO-239 

adaptor. 

www.mirageamp.com • Toll-free 1-800-647-1800 131 

45+ 

Power Curve -- typical Mirage B-310-G amplifier output power 

B-310-G 

Watts Out 

B-310-G 

Watts In 

25 50 75 95 100 100 100 100+ 100+ 100+ 

.25 0.5 1 2 3 4 5 6 7 8 

MIRAGE B-320G . . . 200 Watts on 2 Meters with HT or Transceiver!

MIRAGE HF/VHF/UHF PREAMPLIFIERS 

KP-1 

$ 149 95 


High gain ultra low noise GaAsFET preamps for receiving weak signals. 

Select-able gain prevents receiver intermod. 15-22 dB gain. Auto 

RF switching to 160W. Choose In-shack (details below) or Mast- 

Mount models (right). 

MODEL KP-1 In-Shack Model Features: 

A. KP-1/10M • Automatic RF Switching 

B. KP-1/6M • GaAsFET boosts weak receive signals 

C. KP-1/2M 

D. KP-1/220MHz • In-Line design for easy operation 

E. KP-1/440MHz • High or Low switchable gain setting 

FREQUENCY KP-1 In-Shack Model Features: 

A. 28-30 MHz • Gain: from 15 dB to greater than 25 dB 

B. 50-54 MHz • Noise: less than 1 dB 

C. 144-148 MHz • Power Handling: 100 Watts 

D. 220-225 MHz • Size: 4 1 /4Wx2 5 /16Hx1 3 /16D inches 

E. 430-450 MHz 

KP-2 

$ 199 95 

Suggested 

Retail 

MIRAGE VHF/UHF Repeater Amplifiers 

Dedicated Repeater Amplifiers for Continuous Duty Service 

10 models to choose from -- continuous 

duty all mode FM/SSB/CW repeater amplifiers 

for 6, 2, 220 MHz, 450 MHz, and 

ATV service. 

50, 144 and 220 MHz Models 

FEATURES: 

Cool Running - A 10” high by 19” wide 

full finned rack-mounted heatsink keeps the 

transistor temperatures low for long life. 

Chassis cover is perforated so air convection 

will keep the circuit board area cool. 

Dual Protection - The amplifiers have 

two temperature sensors; one on the 

heatsink and one on the circuit board. If 

conditions cause either to overheat, the 

amplifier will shut off until it cools down to 

a safe temperature. 

Bypass Mode - These models will feed 

the exciter output straight through to the 

antenna in an over-temperature condition. 

The bypass mode can also be remotely 

selected by proper interfacing to the 

repeater controller. Either a relay contact 

or a TTL logic can be used to select the 

bypass mode or amplified mode of operation. 

Reduced Relay Wear - The amps have 

a selectable long release time (adjustable 

up to 5 seconds) for the RF change-over 

relay. This prevents unnecessary action 

during repeater operation. 

On-site Control - The bypass mode and 

relay release time can be selected with 

built-in switches. The operational 

MIRAGE RC-1 remote control box can be 

used to switch these functions up to 18 feet 

away from the amplifier. 

440 MHz and ATV Models 

FEATURES 

Cool Running - A 10” high by 19” wide 

full finned rack-mounted heatsink keeps the 

transistor temperatures low for long life. 

The chassis cover is perforated so air convection 

will keep the circuit board area 

cool. The RF board is low loss Teflon R for 

minimum dielectric heating. 

Reliable - The RF change-over relay has 

been eliminated on this model to provide 

the highest order of reliability. 

Teflon R connectors are standard on this 

well-designed unit. 

Protection - The amplifier will shut off if 

conditions cause the heatsink temperature 

to rise to an unsafe level of operation. 

All Mode Operation - Class AB linear 

operation is rated for FM, SSB, CW and 

ATV operation. 

1 YEAR WARRANTY ON ALL 

REPEATER AMPLIFIERS 

Warranty - Mirage repeater amplifiers 

are guaranteed for one year against failure 

due to defective workmanship or materials. 

MIRAGE Repeater Amp Specifications 

Model# Price Input Max Out MHz 

A-1015-R 

B-1018-R 

B-2518-R 

C-211-R 

C-1012-R 

C-2512-R 

D-1010-NR 

D-3010-NR 

D-100-ATVN-R 

D-1010-ATVN-R 

$579.95 

$629.95 

$599.95 

$659.95 

$659.95 

$625.95 

$719.95 

$689.95 

$689.95 

$689.95 

.25-5 W 

.25-3 W 

.5-10 W 

.25-.5 W 

.25-6 W 

.05-15 W 

.25-4 W 

1-15 W 

.25-1 W 

.25-4 W 

MODEL KP-2 Mast Mount Model Features: 

A. KP-2/10M • Automatic RF Switching 

B. KP-2/6M • GaAsFET boosts weak receive signals 

C. KP-2/2M • Mast Mounted design to reduce loss 

D. KP-2/220MHz • In-Line design for easy operation 

E. KP-2/440MHz • High or Low switchable gain setting 

FREQUENCY KP-2 Mast Mount Model Features: 

A. 28-30 MHz • Gain: from 15 dB to greater than 25 dB 

B. 50-54 MHz • Noise: less than 1 dB 

C. 144-148 MHz • Power Handling: 100 Watts 

D. 220-225 MHz 

E. 430-450 MHz 

• Voltage: 12-15 VDC 

• Size: 41 /4Wx25 /16Hx13 /16D inches 

98 W 

130 W 

111 W 

80 W 

96 W 

90 W 

80 W 

75 W 

52 W 

80 W 

50-52 

145-148 

145-148 

223-225 

223-225 

223-225 

440-450 

440-450 

420-450 

420-450 

132 www.mirageamp.com • Toll-free 1-800-647-1800 

Precision 

SWR/Wattmeters 

Mirage precision 

SWR/Wattmeters read 

peak or average reading 

and SWR directly on 

an extra high quality 

meter movement. 

Doesn’t require extra 

charts/graphs. Reads 

forward or reflected 

power, peak or average 

and SWR at-a-glance. 

MP-1 

$ 235 95 


Mirage precision 

SWR/Wattmeters also 

feature negligible insertion 

loss, a remote coupler 

mounting, low bat- 

tery indicator, and a large 5-inch easy-toread 

meter. Line impedance is 50 Ohms. 

Requires 9-13.6 VDC or 9 Volt battery, 

not included. Measures a compact 

5 3 /4Wx4 1 /2Hx5 3 /4D inches. Weighs just 3.5 

lbs. Four models to choose from: 1.8 to 

30 MHz, 50 to 200 MHz, 420 to 450 

MHz, and 1260 to 1300 MHz. Each has 

Mirage’ superb1 year parts/labor warranty. 

MODEL PRICE F (MHz) SWR sens Power 

MP-1 $235.95 1.8-30 MHz 1-2 Watts 2000 W 

MP-2 $235.95 50-200 1-2 Watts 1500W 

MP-3 $265.95 420-450 5 Watts 150 W 

MP-4 $279.95 1260-1300 1 Watt 1/10/100 

MP-13 SWR/Wattmeter 

MP-13, 

$89.95. 

Compact 

meter features 

peak and average, 

forward 

and reflected power reading and SWR. 

Covers 125-525 MHz. 

Handles 200 Watts. Selectable ranges: 

5, 20, 200 Watts. Large 25 /8x11 /4” illuminated 

meter (requires 12 VDC). SO-239 

connector, measures 6W21 /2Hx4D inches.

VECTRONICS 

2013 HAM RADIO CATALOG 

Vectronics 2 kW Roller Inductor Antenna Tuner 

The Vectronics HFT-1500 Roller 

Inductor Tuner has three continuously 

variable components -- two 4.5 kV capacitors 

and a roller inductor controlled by a 

precision crafted crank handle and a gear 

driven 5-digit counter. 

Tune ANY Real Antenna! 

The HFT-1500 will tune ANY real 

antenna . . . verticals, dipoles, inverted 

vees, beams, long wires, SWL antennas . . 

. ANYTHING! And its huge components 

make the tuning ARC-FREE! 

You can tune your SWR down to the 

absolute minimum from 1.8 to 30 MHz, 

including MARS and the WARC bands. 

Handles 2 kW SSB PEP amplifier input 

power. 

21-Segment Bargraph for SSB Power 

The bargraph is a 21 segment display 

that makes analyzing SSB power amazingly 

easy. This LED meter shows your peak 

HFT-1500 

$ 479 95 

Ship Code D 

reading and has fully 

adjustable level and 

delay controls. 

A lighted dual 

movement 

D’Arsonval Cross- 

Needle 

SWR/Wattmeter displays 

SWR, forward 

and reflected power 

simultaneously at a glance. RF directional 

coupler is fully shielded for even greater 

accuracy. 

The meter measures peak and average 

power in the 300/3000 Watt scales. 

Bargraph display and meter lamp require 

12 VDC adapter, included. 

The antenna selector switch is a six 

position ceramic. Coax 1 is for tuned and 

tuner byass; Coax 2 is for tuned and tuner 

bypass, bypass and balanced antenna. 

The HFT-1500 measures 5.5Hx12W 

x12.5D inches and is housed in a beautiful 

RF-tight aluminum cabinet. Weighs 10 lbs. 

VC-300DLP . . . World’s most versatile HF Antenna Tuner 

Get everything you’ve ever wanted . . . 

precise inductance control that rivals roller 

inductors and the ability to match any real 

antenna! 

VC-300DLP gives you full 1.8-30 

MHz coverage, peak reading backlit 

Cross-Needle Meter, 8 pos. antenna 

switch, built-in 50 Ohm dummy load, 

finest components and world class quality. 

VECTRONICS’ exclusive Multi48 TM 

inductor gives you forty-eight inductance 

values -- you’ll get precision tuning that 

rivals the most expensive roller inductors. 

Tune any real antenna 1.8-30 MHz, including 

all MARS/WARC bands. Verticals, 

dipoles, yagis, quads, long-wires, G5RVs... 

Has 4:1 balun for balanced 

line antennas. 

Handles up to 300 Watts 

SSB PEP, 200W continuous 

(150W, 1.8 MHz). 

VC-300DLP 

$ 179 95 

Ship Code B 

A backlit Cross-Needle Meter displays 

SWR, forward and reflected power simultaneously. 

Reads both peak and average 

VECTRONICS Deluxe 300 Watt Antenna Tuner 

with 21 Segment SSB Bargraph 

VC-300D, $219.95. Similar to VEC-300DLP, but 

has 21-segment bargraph display that makes analyzing 

SSB power amazingly easy. LED meter shows peak 

reading and has fully adjustable level and delay controls. 

VECTRONICS SWR/Power Meters 

PM-30, $89.95. 

For 1.8 to 60 

MHz. Displays forward 

and reflected 

power and SWR 

simultaneously on 

dual movement Cross- 

Needle Meter. True shielded directional 

coupler assures accuracy. Backlit meter 

displays peak or average power in 

300/3000W ranges. Measures a compact 

5.3x5.75x3.5 inches. Has quality SO-239 

connectors. 

PM-30UV, $99.95. 

For 144, 220 and 

440 MHz ranges. 

Covers 144/220/440 

MHz. Has 30 and 300 

Watt ranges. Quality 

SO-239 connectors. 

PM-30UVN, $99.95. 

Similar to PM-30UV but has Type N 


PM-30UVB, $99.95. 

Similar to PM-30UVN but has BNC 


power on 30/300 Watt scales. Lamp has 

front panel switch and uses 12 VDC or 110 

VAC with optional AC-12 $15.95. 

An 8-position antenna switch selects 2 

coax fed antennas, random wire/balanced 

line or built-in dummy load for use 

through your tuner or direct to your transceiver. 

Bypass position keeps your Cross- 

Needle SWR meter in line. 

Use the built-in dummy load for testing 

and repairing your rig, setting power 

level, adjusting your mic gain and more. 

Chemically treated aluminum case has 

durable baked-on paint and scratch-proof 

color Lexan front panel. Measures a compact 

10Wx9.5Dx3.5H inches. 

Vectronics 300 Watt Mobile Tuner 

VC-300M 

$ 129 95 

Ship Code B 

The VC- 

300M Mobile 

AntennaTuner is compact, lightweight, 

easy-to-operate and is our most economical 

tuner. It’s compatible with any mobile 

antenna and any mobile HF transceiver and 

is small enough to fit the most compact car. 

Use at your home base station with 

dipoles, vees, verticals, beams or quads fed 

by coax. Backlit dual movement meter 

simultaneously monitors power and SWR. 

Covers 18 to 30 MHz. Handles 300 

Watts SSB PEP, 200 Watts continuous, 

(150 Watts on 1.8 MHz). 

Measures 7.25Wx8.75Dx3.6H inches. 

Weighs just 3.4 pounds. 

www.vectronics.com • Toll-free 1-800-363-2922 133

1500 Watts HF/VHF/UHF 

Dry Dummy Load 

DL-650M, 

$79.95. 

Handles 

100 Watts 

continuous, 


Watts for 

10 seconds 

to 650 

MHz. 

Ceramic 

resistor. 

SWR 

lower than 1.3:1. Has 

SO-239 Connector. 

DL-650MN, $84.95. 

Like DL-650M but has 

N-type connector. 

VECTRONICS HF/VHF/UHF Dry Dummy Loads 

300 Watts Dry 

Dummy Loads 

DL-300M, $49.95. 

Handles full 300 Watts for 

thirty seconds. Air-cooled, non-inductive 

resistor in a perforated metal housing. Has 

SO-239 connector. Silk-screened derating 

curve. SWR below 1.1:1 to 30 MHz. 

DL-300MN, $54.95. Like DL-300M but 

with N connector. 

VECTRONICS Low Pass TVI Filters 

1500 Watts Low Pass TVI Filter 

LP-30 

$ 89 95 

Ship Code A 

Use between 

Transmitter and 

Antenna or 

Tuner. Reduces 

TV interference 

(TVI) radiated 

by transmitters operating 

below 30 MHz. 

Suppresses harmonics 

appearing in the TV 

bands. Additional 

attenuation to TV IF 

frequencies above 40 MHz. Low loss to 30 

MHz. 9-pole inverse Chebyshev design. 


Passband: 0-30 MHz Cutoff freq: 35 

MHz Attenuation: 42.17 MHz (Color IF), 

-70 dB 45.75 MHz (Video IF), -70 dB 

52.25 MHz (Channel 2 Video), -60 dB; 

Worst case at 65 MHz, -60 dB Power 

Capacity:1500 W Key Down - 50% Duty 

Impedance: 52 Ohms Insertion Loss: 0.25 

dB @ 30 MHz VSWR: Less than 1.5:1 

Dimensions: 8.75Wx3Dx2.75H inches. 

Tuned Active SWL Antenna 

AT-100 

$ 99 95 

Ship Code A 

DL-650M 

$ 79 95 

Ship Code A 

AT-100, $99.95. 

This portable compact antenna is perfect 

for indoor use by itself or with an 

external antenna. 

Tunes from 300 KHz to 30 MHz including 

VLF, AM broadcast, all shortwave 

and ham radio bands. Great for SWL! 

DL-300M 

$ 49 95 

Ship Code A 

2500 Watts LowPass TVI Filter 

Use 

between 

your 

Transmitter 

and 

Antenna 

or Tuner. 

Reduces TV interference 

(TVI) radiated by transmitters 

operating below 

30 MHz. Suppresses 

harmonics appearing in 

the TV bands. Additional 

attenuation to 

TV IF frequencies 

above 40 MHz. Low 

loss to 30 MHz. 9-pole 

inverse Chebyshev. 


LP-2500 

$ 139 95 

Ship Code A 

Passband: 0-30 MHz; Cutoff freq: 35 

MHz; Attenuation: 52.25 MHz (Channel 2 

Video), -60 dB; Worst case at 65 MHz, -60 

dB Power Capacity: 2500 W Key Down - 

50% Duty Impedance: 52 Ohms; 

Insertion Loss: 0.25 dB @ 30 MHz; 

VSWR: Less than 1.5:1; Dimensions: 

9.5Wx4.25Dx2.38H in. Weight: 2.5 lbs. 

Deluxe Iambic CW Keyer 

CK-200, $99.95. Speed, weight, tone, volume 

controls, tune, iambic A/B switch,3 

types of keying output, speed control 6-50 

wpm, self-complete dots/dashes. Use 9V 

battery/110 VAC. 

Deluxe Iambic CW Paddle 

KP-200, $79.95. Iambic Key Paddles 

complete with 1/4” plug and cable. 

KP-200, chrome base or KP- 

200B, black base. 

134 www.vectronics.com • Toll-free 1-800-363-2922 

2500 Watts Fan-cooled Dry 

Dummy Load 

DL-2500, 

$219.95. 

2500 Watts 

dry dummy 

load is fan 

cooled. DC 

to 150 MHz. 

Can dissipate 

2500 

Watts average 

power 

for one 

minute on, 

ten minutes 

off. Detailed power 

curve. 

DL-2500N, $229.95 with 

N connector. 

High Pass TVI Filters 

Installs 

between VCR 

and TV and 

cable TV or 

antenna lead- 

in cable. Eliminates or reduces 

interference caused by nearby 

Ship Code A 

HF transmitters operating 

below 30 MHz. Low loss in the TV pass- 

band 52-550 MHz. Unique shield breaking 

circuit prevents cable from acting like an 

antenna. SPECIFICATIONS: Passband: 

52-550 MHz; Cutoff Freq: 50 MHz; 

Attenuation: More than -60dB at 10 MHz; 

More than -55 dB at 20 MHz; More than - 

40 dB at 30 MHz 

Impedance: 75 Ohms; Insertion Loss: 

Less than 0.5 dB @ 52-550 

MHz; Conn-ectors: CATV 

(Type F) 75 Dimensions: 

3.25Wx1.5Dx2H inches. 

HPF-2 Deluxe High Pass Filter 

Use between Cable and 

VCR/TV set. 

Reduces TV interference 

(TVI) 

from nearby radio 

transmitters (like 

broadcast, commercial, 

two-way, amateur, and 

CB below 30 MHz. 

Unique common-mode 

VECTRONICS 

High Pass Filter 

HPF-1 

DL-2500 

$ 219 95 

Ship Code B 

HPF-2 

$ 34 95 

Ship Code A 

HPF-1 

$ 29 95 

rejection (RF current on the shield of coax 

cable) using a toroid ferrite core. 


Passband: 52-550 MHz; 

Cutoff Freq: 50 MHz 

Attenuation: More than 80dB: 1-14 MHz; 

More than 70 dB: 14-25 MHz; 

More than 50 dB: 25-30 MHz 

Impedance: 75 Ohms; 

Insertion Loss: Less than 0.25 dB @ 52-550 

MHz; 

Connectors: CATV 

(Type F) 

Dimensions: 

3.625Wx1.12Dx2H 

inches.

Vectronics high-performance electronic kits . . . fun to build and use! 

Comprehensive Soldering Course Kit. 

Designed for 

schools and individuals. 

Includes 

theory, quizzes, 

PC board and 

components for 

soldering practice. 

Used & endorsed 

by universities, votechs, 

businesses and 

others. Order VEC-1500K, $29.95. 

Old-Fashioned Crystal radio set Kit 

Relive the experience of early radio pioneers! 

This baby really works! Wind your own inductor, wire up the earliest radio 

circuit without soldering a thing and listen to the magic of radio that needs 

no power. Put up an antenna, connect ground. Stations come in amazingly 

loud and clear. 1 3 /4x5x6 1 /2”. Has antenna wire, earphone. Great boy or girl 

scout lesson, school project or fun grandchild weekend!!! Simple level. Order VEC-121K, $19.95. 

Full featured CW Keyer Kit is the 

best bargain in radio! Self-completing 

dot-dashes and dot-dash memory forgive 

timing errors. Front volume, speed (3-65 

wpm) controls. Weight adjusts 25-75%. Sidetone 

(300 -1000Hz). LM386 audio amp for ext. 

speaker. Iambic A/B, fully auto or semi-auto “bug” 

mode. Sleep Mode battery saver. Use 9V. 1 3 /4x4x 

3 1 /2”. Simple level. Order VEC-201K, $24.95. 

CW Memory Keyer Kit stores 512 

characters in four 128 character 

non-volatile EEPROM message 

memories. Carry on entire QSOs by 

just pressing memory message buttons. 

True sinewave sidetone with soft rise and 

fall time eliminates harsh keyclicks. Has all 

features of VEC-201K CW Keyer Kit. 1 3 /4x 6 3 /4 

x5 1 /4 in. Simple. Order VEC-221K, $69.95. 

Tunable SSB/CW Audio Filter Kit has 

sharp four pole peak and notch filters. 

Zero in with frequency control & adjust 

bandwidth for best response. Tune frequency 

from 300-3000 Hz. Notch is an outstanding 

50 dB. 1 Watt amplifier. Speaker/Phone 

jacks. 12 VDC at 300 mA. 1 3 /4x4 3 /4x5 1 /4 in. 

Intermediate skill level. VEC-841K, $34.95. 

Super CW Audio Filter Kit gives you 

three bandwidths: 80, 110, 180 Hz. 

Eight poles gives super steep skirts 

with no ringing. Pull CW QSOs out of 

terrible QRM! Plugs into phone jack to drive 

phones. QRM down 60 dB one octave from center 

frequency (750 Hz) for 80 Hz bandwidth. 

Improves S/N ratio 15 dB. Use 9V battery. 

1 3 /4x4x 3 1 /2 in. Simple. VEC-820K, $19.95. 

Super CW filter/ amplifier Kit has 

powerful 1 watt audio amplifier to 

drive speaker. 8 poles active IC filtering 

uses cascaded low-Q stages. 3 

bandwidths: 80,110, 180 Hz. Center 

frequency: 750 Hz. Up to 15 dB. Use 9-18VDC, 

300 mA max. 1 3 /4x4 x3 1 /2 in. Simple skill level. 

Order VEC-821K, $29.95. 

Super SSB Audio Filter Kit improves 

readability with 8 poles, optimizes 

audio bandwidth, reduces SSB splatter, 

low, hi-pitched interference, hiss, static 

crashes, background noise. Use 9 Volt battery. 

1 3 /4x4x 3 1 /2 inches. Simple skill level. Order 

VEC-830K, $19.95. 

Ni-Cad/Ni-MH Battery Charger Kit 

safely quick charges expensive batteries - 

- no overcharging -- many in less than an 

hour. HTs, cell phones, camcorders, lap top. 

1 3 /4x4 3 /4x5 1 /4 in. Moderate. VEC-412K,$49.95. 

Portable CD/MP3 Amp Kit has 4 

Watt per channel amplifier. Plug in a 

portable CD player and a pair of 8 

Ohm speakers.Fill your room with music. 12V 

battery/12 VDC. Simple. VEC-1604K, $19.95. 

Blinking Tower LED Electronic 

Badge Kit. Be proud of who you are! 

Listed in the boy 

scout badge 

handbook, this 

is a great 

evening project 

for your boy 

scout troop and 

a great way to 

introduce them to ham radio and basic 

electronics. Order VEC-5100K, $12.95. 

SCA Decoder Kit lets you discover interesting 

programming hidden in many standard 

FM broadcast signals. Commercialfree 

background music, all news programs, 

weather reports, stock quotes, digital data, ethnic 

programs, reading services for the blind, etc. Tune 

entire SCA band from 50 to 100 KHz. Connect 

422K to detector output of your FM receiver. 

1 3 /4x6 1 /2x5”. Simple level. VEC-422K, $27.95. 

Aircraft Receiver Kit tunes entire voice 

aircraft band 118-136 MHz -- air traffic 

100 miles away. Track incoming/outgoing 

traffic in your area, advanced weather 

information, discover how National Air Traffic 

System works. Great way to learn about aviation. 

Use 9V battery. Drives external speaker/phones. 

1 3 /4x4x3 1 /2 in. Intermediate. VEC-131K, $29.95. 

Shortwave Converter Kit converts AM 

or AM/FM radios to shortwave receivers 

at a push of a button. Choose 2 1 MHz 

bands between 3 and 22 MHz. Popular 

13,16,19, 25, 31, 41, 49 and 60 Meters international 

bands. On/off bypass, NE-602/612 mixeroscillator 

IC and tuned input circuit. 9 V battery. 

1 3 /4x4x3 1 /2”. Intermediate. VEC-101K, $27.95. 

49 MHz Wireless Band Monitor 

Receiver kit lets you explore 

weak wireless signals from miles 

around. Baby monitors, cordless 

phones, walkie-talkies, wireless 

intercoms and more! Electronic 

tuning covers just the 49 MHz band. Intermediate 

skill level. Order VEC-1016K, $34.95. 

Emergency and Business Band 

Receiver lets you gather news 

first hand -- tune in local fire, 

police, ambulance, business, etc. 

Master 2-way radio lingo, operating 

procedures and police 10codes 

as you find the “real story”! 

9V battery. Intermediate. VEC-1012K, $34.95. 

Voice Activated Recorder Switch 

Kit can remotely and auto record 

conversations, speeches. Don’t waste 

tape by not recording silence. Plug in 

remote recorder jack and it activates 

when it hears speech. Built-in mic, on/off. Use 

9V battery. Simple. VEC-483K, $19.95. 

Counter Surveillance Monitor Kit lets 

you search out and remove electronic 

bugs! Highly sensitive wideband receiver 

detector. Higher pitch audio occurs when bug is 

near. 9 V batt. Moderate. VEC-8218K, $39.95. 

The GIANT 

Book of 

Electronic 

Projects, 

Volume I 

Cases available for most kits listed above, $14.95. 

Add “C”. Example: VEC-201KC, $14.95. 

The Giant Book of Electronic Projects 

VEC-1901, $19.95. Includes 19 kits 

on this page. Building tips, complete 

parts lists, parts placement,PC 

board layouts, test/alignment, more. 

Shortwave Receiver Kit lets 

you listen to the world! 

Covers 75/80, 49, 40, 30, 31, 

20, 25, 22, 19, 17, 16, 15 and 

13 Meter bands. Explore AM, SSB, CW, WWV, 

RTTY and Packet signals. Vernier reduction drive, 

smooth regeneration control, RF stage. Includes all 

metal cabinet. 2 earphone jacks. Use 9V battery. 

2 1 /2x7x6 in. Intermediate skill level. Order VEC- 

102K, $79.95. 

QRP Transceiver Kits for 80/40/30/20 Meters 

give you VXO frequency control, broadbanded 

transmitter circuitry, solid one 

Watt plus output, shaped keying, .3 uV 

sensitivity, direct conversion receiver. Includes 

crystal for popular QRP frequency. 1 3 /4x 4 3 /4 

x5 1 /4”. Intermediate skill level. Order VEC-1380K 

(80 Meters),VEC-1340K(40 Meters),VEC-1330K 

(30 Meters),VEC-1320K(20 Meters), $59.95 each. 

20/30/40/80 Meter Receiver Kits 

give high performance! Covers 

entire band or tailor to cover 

desired portion. Copy 

CW/SSB/AM. NE602/ 612 mixeroscillator, 

LM386 high gain audio 

amplifier. 1 3 /4x4 3 /4x 5 1 /4 in. 

Moderate skill level. Order VEC-1120K (20 

Meters),VEC-1130K(30 Meters),VEC-1140K (40 

Meters), VEC-1180K (80 Meters), $29.95 ea. 

20/30/40/80 Meter QRP CW 

transmitter Kits have variable 

crystal oscillator tuning, front panel 

switch selects 1 of 2 crystals. 1 

crystal included. Transmit and 

Receive switch. Connect receiver. 

1 3 /4 x4x3 1 /2 in. Intermediate skill 

level. Order VEC-1220K (20 Meters), VEC-1230K 

(30 Meters), VEC-1240K (40 Meters), VEC-1280K 

(80 Meters), $29.95 each. 

2/6/10 Meter FM Receiver Kits let you 

tune in the world of amateur radio repeater 

action with these superb educational kits. 

Each covers the entire FM sub-band and 

runs off your 9V battery. Experience what 

it’s like for ham radio operators in your area. 

Plug in speaker or headphones for clear reception. 

1 3 /4x4x3 1 /2”. Intermediate. VEC-1002K (2 Meters), 

VEC-1006K (6M), VEC-1010K (10M), $34.95 each. 

AM Radio Transmitter Kit lets you set 

up your own AM station and broadcast 

crystal clear programming from your studio 

with you as the disc jockey. Choose 

clear frequency from 530-1750 KHz. 

Standard line level or microphone input. 

Easy connection. Audio level adjustment. 1 3 /4x4x3 1 /2 

inches. Simple skill level. Order VEC-1290K, $29.95. 

FM Stereo Transmitter Kit lets you 

connect your MP3/CD player, tape or 

other source and broadcast clear stereo 

programming on the FM band! 

Realistic grand movie theater sound! 

Use to assist hard-of-hearing. 

Frequency adjusts 88-108 MHz. 9V battery 

or 5-15 VDC. Moderate. VEC-1292K, $39.95. 

144/220/440 MHz Low-Noise 

Preamp Kits soup up your antenna 

system, pull in weak signals. Great 

low-noise performance, immunity 

from damaging electrostatic discharge. 

1x1 1 /2”. Simple. VEC-1402K (144 MHz), VEC- 

1422K (220 MHz), VEC-1444K (440 MHz), $17.95. 

High-performance 2 Meter Preamp Kit 

pulls weak signals out of noise. Boosts 

signals, provides razor-sharp bandpass filtering, eliminates 

electrical noises w/built-in balun. 9-14 VDC. 

1 1 /2 x3x1”. Intermediate.VEC-1402DK, $59.95. 

Vacuum-Tube Preamplifier Kit lets 

you enjoy the vintage sound of a real 

life vacuum tube preamp. High degree 

of even-harmonic distortion. Includes tube, 110 VAC 

power supply. Moderate. VEC-1680K, $99.95. 

Vectronics kits . . . fun to build and use 135

MFJ ENTERPRISES, INC. 

300 Industrial Park Road 

Starkville, MS 39759 USA 

Product Index, pages 80-81 

Order Form on page 86 

TO: 

2013 AMATEUR RADIO CATALOG 

Ameritron1200W Output Solid State Amplifier 

1200 Watts PEP Output, Instant bandswitching, no tuning, no warm-up, SWR protected, 1.5- 

22 MHz . . . Quiet Variable-Speed Cooling System . . . PEP Forward/Reflected Metering . . . 

PA Balance /ALC Metering and LED Indicator . . . Front Panel Band and Error LEDs . . . 

AMERITRON ALS-1300 is a solid 

state near legal limitTM ALS-1300 

$ 2899 


Call Your Dealer for Your Best Price! 

FET no-tune 

Amplifier. Get instant bandswitching, 

no tuning, no warm-up, no tubes to 

baby and no fuss! 

Reliability of the ALS-1300 is 

insured by using eight rugged MRF-150 

power FETs. Ameritron’s eight FETs are 

mounted on the dual heavy duty heat 

sink. They are properly arranged to 

spread out the heat over a large surface, 

something that other amplifiers using a 

single power device cannot do. Some 

FETs actually are a package of several 

transistors in one large case. This concentrates 

all of the heat in one small 

package. They not only are more difficult 

to cool, if one transistor fails they 

all have to be replaced. 

The ALS-1300 RF deck operates 

from 50 Volts for efficient, low distortion 

linear RF power service. It’s cooled by a 

whisper quiet cooling fan. Fan speed is 

regulated by temperature sensors, assuring 

minimum noise for adequate cooling. 

ALS-1300 runs up to 1200 Watts of clean 

SSB output power (just 100 Watts drive gives 

you the full rated 1200 Watts output) for continuous 

coverage between 1.5-22 MHz. 

10/12 Meters available to licensed amateurs 

with an optional kit (MOD-10MK, 

$39.95). Must present FCC license 

at time of sale. 

The operator-friendly layout fits 

nearly any station configuration. The 

attractive desktop amplifier unit 

weighs only 22 pounds. Compact 

10Wx 6 1 /2Hx18D inches. 

SWR Protection prevents amplifier 

damage if you switch to the wrong 

band, use the wrong antenna or have 

a high SWR. Over-power protection 

enables if output forward power or 

reflected power exceeds a safe level. 

Output power is automatically 

reduced to prevent amplifier damage 

by controlling ALC to exciter. 

LED illuminated Cross-Needle 

SWR/ Wattmeter lets you read SWR, 

forward and reflected peak power 

Peek Inside . . . 

Be prepared to be amazed at the beautiful 

workmanship of this finely crafted piece 

of electronic art! It’s another beautiful, yet 

powerful Ameritron Amplifier! 

simultaneously. You also get ALC, SWR, 

PA balance and transmit meter and LED 

indicators. An Operate/ Standby switch lets 

you run “barefoot”, but you can instantly 

switch to full power if needed. 

Front-panel ALC control! This exclusive 

Ameritron feature lets you adjust output 

PRSRT STD 

U.S. Postage 

PAID 

MFJ Enterprises, Inc. 

power on the convenient front panel display. 

You also get front panel Operation, Band, 

and error LED indicators like reflected power 

and bandswitch errors. 

Enjoy 1200 Watts of no tune Solid State 

power with the Ameritron ALS-1300 amp. 

But it gets even better than this! Do you 

want to place even the main ALS-1300 

amplifier out of the way? Do you want the 

ALS-1300 to change bands automatically 

when you change bands on your radio? 

You now have these options. 

A pair of RJ45 remote control interface 

jacks on the amplifier permits ALS-1300 to 

be controlled either manually by the optional 

ALS-500RC (see page A-6) Remote Control 

Head, or automatically by the optional ARI- 

500 (see below) Auto Band Switch. 

The Automatic Band Switch reads band 

data from your transceiver and automatically 

changes the ALS-1300 bands as you 

change bands on your transceiver. A 

super-clean layout with easy-service 

modular construction will give you years 

of operation. 

ALS-1300SPS Power Supply 

The ALS- 

1300 is powered 

by a 50 VDC 

switching power 

supply. Comes 

with pre-wired 

cable to plug into 

the ALS-1300. 

This hash-free fully-regulated switching 

power supply is only 12 lbs. and 

measures a compact 10Wx6 1 /2Hx9 1 /2D 

inches. It can be placed conveniently 

out-of-the-way at your operating station. 

Output is 50 VDC at 50 Amps to the 

ALS-1300. Wired for 220 VAC, selectable 

to 110 VAC. Draws less than 25 

Amps at 110 VAC; 12A at 220 VAC. 

. . . the world’s high power leader! 

116 Willow Road, Starkville, MS 39759 

TECH (662) 323-8211 • FAX(662) 323-6551 

8 a.m. - 4:30 p.m. CST Monday - Friday 

For power amplifier components call (662) 323-8211 

http://www.ameritron.com

MFJ tiny Travel Tuners Tiny 41/2x21/4x3 inch tuner handles full 150 ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?